Submitted by Patrícia Cerveira (pcerveira1@gmail.com) on 2017-06-12T18:19:03Z No. of bitstreams: 1 José Renato Cozzolino.pdf: 2923143 bytes, checksum: 2941736082bf50938fdb3dcfea03c36e (MD5) / Approved for entry into archive by Biblioteca da Escola de Engenharia (bee@ndc.uff.br) on 2017-07-03T13:30:54Z (GMT) No. of bitstreams: 1 José Renato Cozzolino.pdf: 2923143 bytes, checksum: 2941736082bf50938fdb3dcfea03c36e (MD5) / Made available in DSpace on 2017-07-03T13:30:54Z (GMT). No. of bitstreams: 1 José Renato Cozzolino.pdf: 2923143 bytes, checksum: 2941736082bf50938fdb3dcfea03c36e (MD5) / A estimação correta de frequência é essencial para a operação de diversos equipamentos de proteção, regulação e controle, os quais são necessários para operação adequada do Sistema Interligado Nacional A tecnologia de Sistemas de Medição Fasorial Sincronizada (Synchronized Phasor Measurement Systems - SPMS), baseia-se em uma rede de Unidades de Medição Fasorial (Phase Measurement Unit - PMU). Duas grandezas importantes medidas pela PMUs são a frequência e a taxa de variação da frequência. Este trabalho apresenta o resultado de estudo comparativo de algoritmos de estimação de frequência no âmbito de medição fasorial sincronizada. Foram avaliados os modelos propostos originalmente pela Norma IEEE C37.118, por seu documento de alteração ( IEEE Std. C37.118.1a-2014 Amendment), alem de três diferentes tipos de algoritmos baseados em PLLs (Phasor Locked Loop). As avaliações foram executadas com base nos testes descritos na Norma IEEE C37.118 e seus respectivos requisitos de conformidade. Verificou-se que as modificações apresentadas pelo documento Amendment foram necessárias para que o modelo de PMU proposto atendesse os requisto para todos os testes. Em relação aos modelos de PLL, verificou-se que uma versão do algoritmo (chamada aqui de PLL de Classe III) foi bem superior às demais e também melhor que o algoritmo sugerido pelo Amendment no que se refere ao teste de derivada da frequência e de modulação de fase. / An accurate frequency estimation is essential for the operation of Electric Power System regarding protection and control. Synchronized Phasor Measurement Systems - SPMS are based on a network composed by Phasor Measurement Units (Phase Measurement Unit - PMU). Two important parameters measured by the PMUs are the frequency and the frequency rate of change. This paper presents the results of a comparative study of frequency estimation algorithms within synchronized phasor measurement context. The reference model proposed in by IEEE C37.118 standard was compared with three different algorithms based on PLLs (Phasor Locked Loop). The evaluations were performed based on the compliance requirements described in IEEE C37.118. It was also found that the PLLs models have superior performance than model reference for P PMU suggested by Standard. Regarding the reference model for PMU M, there is a need to implement anti-aliasing filters for the standard inter-harmonics tests. After that, it was observed that the dynamic performances of PLLs studied at work are compatible with the algorithms suggested by the standard for the PMU M.

L’explosion du marché des télécommunications a donné lieu, lors de ces dernières années, à la multiplication des standards de radiocommunication. De nos jours, l’ensemble de ces moyens de communication utilisés pour le transfert de voix et de données doit être intégré dans les terminaux mobiles. Cependant, cette tendance s’oppose aux contraintes de faible coût qui tendent à diminuer la taille de l’électronique embarquée dans un terminal mobile, mais aussi aux contraintes de diminution de la consommation pour une plus grande autonomie des objets sans fils. C’est donc autour de ces verrous technologiques et techniques que se concentre une part importante des efforts de « R&D » aujourd’hui. Ainsi, l’objectif des travaux présentés repose sur la recherche et le développement d'une architecture contribuant à l’amélioration des performances du bloc central de la chaîne d’émission/réception : l'oscillateur local.L’architecture innovante de synthétiseur de fréquence multistandard réalisée est fondée sur le principe de « conception orientée délai » (DOD - Delay Oriented Design). Une nouvelle technique de stabilisation, issue de la superposition d’une boucle à verrouillage de délai et de phase, est proposée afin d’élargir la bande passante.De l’étude système à la mesure en passant par l’étude comportementale et la réalisation du circuit, les différentes étapes de conception de ce système fractionnaire sont présentées. Les simulations et les mesures ont démontré la capacité du synthétiseur à couvrir une bande comprise entre 1,6 et 3,5GHz avec un signal de référence à 500MHz, mais aussi à stabiliser une architecture très large bande. / The explosion of the wireless communication market is largely responsible of the expansion for RF communication standards for voice and data. Nowadays, each one of them must be integrated in one mobile terminal.However, this trend is opposed to the constraints of low cost, which tend to reduce the size of the electronics in a mobile terminal, but also the constraints of reduced consumption for greater autonomy for wireless systems. It is then around these technological and technical barriers that focus an important part of efforts to « R & D » today. Thus, the objective of the work presented is based on research and development of an architecture that contributes to improve the performances of the central block of transceivers: the local oscillator.The innovative architecture of multistandard synthesizer realized is based on the principle of Delay Oriented Design (DOD). A new technique of stabilization, based on the superposition of a delay and a phase locked loop, is proposed to expand the bandwidth. From study system to measurements through the behavioral comportment and implementation of the circuit, the various stages when designing an RF system are presented. Simulations and measurements have demonstrated the ability of the synthesizer to cover a frequency band between 1.6 and 3.5 GHz with a reference signal at 500MHz, but also to stabilize a broadband architecture.

L'avancement de la communication numérique optique dans les réseaux longue distance et d'accès a déclenché les technologies émergentes dans le domaine micro-ondes / ondes millimétriques. Ces systèmes hybrides sont fortement influencés non seulement par les déficiences de liens optiques mais aussi des effets de circuits électriques. Les effets optiques et électriques peuvent être ainsi étudiés en même temps en utilisant des outils assistés par ordinateur en développant des modèles de circuit équivalent de l'ensemble des composants de liaison tels que les lasers à semi-conducteurs, modulateurs, photo-détecteurs et fibre optique. Dans cette thèse, les représentations de circuit des composants de liaison photoniques sont développées pour étudier des architectures différentes. Depuis la source de lumière optique est le principal facteur limitant de la liaison optique, une attention particulière est accordée aux caractéristiques, y compris les plus importants de simples lasers en mode semi-conducteurs. Le modèle de circuit équivalent de laser qui représente l'enveloppe du signal optique est modifié pour inclure les propriétés de bruit de phase du laser. Cette modification est particulièrement nécessaire d'étudier les systèmes où le bruit de phase optique est important. Ces systèmes comprennent des systèmes de télécommande hétérodynes optiques et des systèmes auto-hétérodynes optiques. Les résultats de mesure des caractéristiques de laser sont comparés aux résultats de simulation afin de valider le modèle de circuit équivalent dans des conditions différentes. Il est démontré que le modèle de circuit équivalent peut prédire avec précision les comportements des composants pour les simulations au niveau du système. Pour démontrer la capacité du modèle de circuit équivalent de la liaison photonique pour analyser les systèmes micro-ondes / ondes millimétriques, le nouveau modèle de circuit du laser avec les modèles comportementaux des autres composants sont utilisés pour caractériser différents radio sur fibre (RoF) liens tels que la modulation d'intensité - détection directe (IM-DD) et les systèmes RoF hétérodynes optique. Signal sans fil avec des spécifications conformes à la norme de IEEE 802.15.3c pour la bande de fréquence à ondes millimétriques est transmis sur les liens RoF. La performance du système est analysée sur la base de l'évaluation de l'EVM. L'analyse montre que l'analyse efficace des systèmes de photonique micro-ondes / ondes millimétriques est obtenue en utilisant des modèles de circuit qui nous permet de prendre en compte les comportements à la fois électriques et optiques en même temps / The advancement of digital optical communication in the long-haul and access networks has triggered emerging technologies in the microwave/millimeter-wave domain. These hybrid systems are highly influenced not only by the optical link impairments but also electrical circuit effects. The optical and electrical effects can be well studied at the same time using computer aided tools by developing equivalent circuit models of the whole link components such as semiconductor lasers, modulators, photo detectors and optical fiber. In this thesis, circuit representations of the photonic link components are developed to study different architectures. Since the optical light source is the main limiting factor of the optical link, particular attention is given to including the most important characteristics of single mode semiconductor lasers. The laser equivalent circuit model which represents the envelope of the optical signal is modified to include the laser phase noise properties. This modification is particularly necessary to study systems where the optical phase noise is important. Such systems include optical remote heterodyne systems and optical self-heterodyne systems. Measurement results of the laser characteristics are compared with simulation results in order to validate the equivalent circuit model under different conditions. It is shown that the equivalent circuit model can precisely predict the component behaviors for system level simulations. To demonstrate the capability of the equivalent circuit model of the photonic link to analyze microwave/millimeter-wave systems, the new circuit model of the laser along with the behavioral models of other components are used to characterize different radio-over-fiber (RoF) links such as intensity modulation – direct detection (IM-DD) and optical heterodyne RoF systems. Wireless signal with specifications complying with IEEE 802.15.3c standard for the millimeter-wave frequency band is transmitted over the RoF links. The system performance is analyzed based on EVM evaluation. The analysis shows that effective analysis of microwave/millimeter-wave photonics systems is achieved by using circuit models which allows us to take into account both electrical and optical behaviors at the same time

This thesis is dedicated to efficiency increase of one phase induction machine through material change of induction cage and rotor slot shape optimization under the condition of maintaining the same locked-rotor torque. In the first part of this thesis is the explanation of induction machine principles. Next is the comparison of measured and simulated parameters of small one phase machine from ATAS company. The following part is dedicated to the analysis of rotor slot shape and ring size influence on machine parameters when using pure aluminum instead of resistive alloy. The next chapter deals with slot shape optimization in the program RMxprt, controlled by genetic algorithm written in MATLAB interface. In the final part are the resultant slot shapes simulated in Ansys Maxwell using finite element method and then the measured, simulated and expected parameters are compared.

The Diploma thesis deals with control of three-phase active rectifier and a three-phase DC/AC converter. It also explains phase-locked loop principle. The theoretical part including first three chapters lists several control approaches to three phase active rectifier and three phase DC/AC converter. Described control approaches to the active rectifier are control in dq frame and control in dq UVW frame. Listed control approaches to the DC/AC converter include cascaded control structure and a full state feedback control. The practical part is divided into last three chapters and includes mathematical description of phase-locked loop principle, model of active rectifier controlled in dq frame and a model of DC/AC converter controlled both by a cascaded control and a full¬ state feedback. The models are created in Matlab Simulink.

Background: Within the emerging field of cryptocurrencies, the sub-sector DeFi (decentralized finance) has experienced explosive growth over the last year, and its importance for crypto as a whole has grown with it. The currencies have developed from simple peer-to-peer transactions to complex applications such as lending and exchanges. Several studies have researched determinants of cryptocurrency prices, and a few have focused on metrics central to DeFi, such as total value locked (TVL). However, academia has aimed sparse attention to the relationships between these metrics, which this article seeks to amend.  Aim: The purpose of this essay is to research the relationship between total value locked (TVL) in DeFi, the prices of native tokens on related platforms, and the price of ether, which is the dominant currency across DeFi.  Methodology: This study is deductive and quantitative and categorized as a causal-comparative thesis. The purpose of causal-comparative research is to find relationships between variables, independent and dependent, over a certain period.  The authors used deductive reasoning to form the hypotheses and collect the data necessary to investigate the hypothesis. Additionally, the structure of the paper and the epistemological process is quantitative and based on the scientific method.  The sources used for data gathering have primarily been DefiPulse and their API:s, retrieved using simple python coding and different applications that parse JSON code into the excel format. The transparent nature of blockchain has provided easy access to data needed for this study. Once the data was collected, it was categorized and compiled into an Excel sheet.  Conclusions: It is a considerable result that the ratio of locked ETH to total supply lacks significance for the price of ether, as it is counterintuitive to the macroeconomic theory of demand and supply. Presumably, the locked eth is not to be considered as a corresponding decrease in supply. However, if that was the case, the locked ratio of 10% is considerable and should affect the price as there is less supply available to the market.  In accordance with hypotheses two, three, and four, changes in the price of ether, TVL, and utilization rate affect the price of the native token. A notable distinction between the three different platforms lies in what metrics correlate more strongly with price changes. It for Compound and Aave was TVL, but utilization rate for MakerDAO. What causes these differences between seemingly similar platforms is a subject for further study.

This thesis deals with the problem of designing vortex flow meter for a nominal range of 40 l.min-1. It describes the problems of vortex bodies and choice of methods for detection of vortices. The thesis includes solution of various problems in the design, which were published in scientific articles or patents. The following describes the design solution vortex flow meter for the specified range, which uses ultrasonic sensors to vortices detection. The proposed flow meter is calibrated with reference flow meter and compared with commercially produced vortex flow by the TST electronics and Burkert companies, which are designed for the specified ranges.

This thesis deals with design of synchronized sources of time signal. The first part of the thesis deals with the theory the crystal resonators, crystal oscillators and PLL. The second part of the thesis deals with the crystal oscillator with 10MHz frequency. In the oscillator is use of SC cut crystal. The third part of the work deals with method of synchronization. To synchronization is use of PLL.

The master’s thesis describes known methods of signal measurement using principle of synchronous detection. Various methods are presented, their principles are examined and the problems when using them are analyzed. Further, procedures for reduction of adverse effects are described also. Second part of this thesis is focused on the instrument design. The instrument is intended for detection and processing of the output signals in a given optometric system. The proposed device is designed to operate on the principle of synchronous detection method using a vector signal evaluation. Advantages and disadvantages are discussed below.

This diploma thesis deals with the ability to determine impact speed of vehicles in traffic accidents. Thesis tries to find out whether jammed needle of speedometer and tachometer, as well as needle's imprint, could provide relevant informations for traffic accident analysis. The outcome is formulation, whether these informations are trustworthy, or under which circumstances are valid.