No description available.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第25015号 / 工博第5192号 / 新制||工||1991(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 古川 修平, 教授 生越 友樹, 教授 杉安 和憲 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

No description available.

No description available.

Metal-Organic Frameworks (MOFs) are hybrid materials and are acknowledged as an important class of functional solid-state materials with high scientific interest in academia and industry alike. Their modular nature in terms of structural and compositional diversity, tunability, high surface area, and controlled pore size renders MOFs as the ideal candidate to address various persistent challenges pertaining to gas storage/separation, catalysis, drug delivery, and smart sensing. Through the field of reticular chemistry, targeted structures can be constructed through multiple design approaches, based on preselected building blocks prior to the assembly process. This thesis illustrates the merit of the supermolecular building layer (SBL) approach for the rational construction and discovery of highly connected and porous MOFs based on rare earth cations. Specifically, the emphasis of this study is on (i) the rational design and synthesis of 3-periodic MOFs based on SBLs pillared by ditopic ligands through post-synthetic modification (PSM) and in situ reactions. (ii) The investigation of the mixed-ligand system with different lengths and geometry of ditopic ligands on the isolation of metal clusters with distinct pore sizes. (iii) Gaining an overall insight into the exploration of different synthetic pathways that control the assembly of rare earth MOFs.

<p>Metal-organic frameworks (MOFs) are considered as a type of very useful materials for the gas separation/purification industries. However, control over the growing position and growing shape of the crystals remains a challenge and must be overcome in order to realize the commercial potentials of MOFs.</p> <p>In this thesis, a method based on interfacial coordination is developed to address this issue. Zinc-benzenedicarboxyl (Zn-BDC) is chosen as a model system for the proof of concept. In a typical liquid-liquid interface protocol, the MOF precursors, zinc nitrate [Zn(NO3)2] and terephthalic acid (TPA or H2BDC), and the catalyst, triethylamine (TEA), were dissolved into two immiscible solvents, dimethylformamide (DMF) and hexane, respectively. The reaction site, i.e. the MOF growing position could thereby be confined at the interface of the two solvents. It was found that a free-standing membrane could be formed with the combinations of high Zn-H2BDC and low TEA concentrations. The combinations of low Zn-H2BDC and high TEA concentrations yielded MOF particles precipitated out from DMF. Similar results were obtained by changing the liquid-liquid interface to liquid-gas interface, with the TEA-hexane solution replaced by saturated TEA vapor. The dependence of product shape on precursor and catalyst concentrations can be explained by the competition between MOF formation and TEA diffusion into the precursor phase.</p> <p>The morphology, constitution and surface area of the MOF products were characterized by SEM, XRD and nitrogen adsorption testing, respectively. The particles were found to be exclusively MOF-5. The membranes were characterized as asymmetric. The top layer was particulate while the bottom layer had a sheet-like morphology. This was further revealed by XRD data as MOF-5 and MOF-2 (ZnBDC·DMF), respectively. This asymmetry was caused by a change of TEA diffusion rate during the synthesis process, which might result in a change in pH value for the membrane growth. Decent surface areas of the particles and membranes were measured.</p> <p>Apart from the free-standing membranes, MOF membranes on Anodisc support were also synthesized employing the same interfacial techniques. The MOF formation site, i.e. the interface, was confined to the upper end Anodisc pores and sealing the pores after the reaction. The difference in wetting force between DMF and hexane with Anodisc membrane material resulted in the difference of MOF layer morphology from liquid-liquid protocol and liquid-gas protocol. The later gave a continuous MOF membrane due to the absence of air bubble interference.</p> / Master of Science (MSc)

The threat of chemical warfare agent (CWA) attacks has persisted into the 21st century due to the actions of terror groups and rogue states. Traditional filtration strategies for soldier protection rely on high surface area activated carbon, but these materials merely trap CWAs through weak physisorption. Metal-organic frameworks (MOFs) have emerged as promising materials to catalyze the degradation of CWAs into significantly less toxic byproducts. The precise synthetic control over the porosity, defect density, and chemical functionality of MOFs offer exciting potential of for use in CWA degradation as well as a wide variety of other applications. Developing a molecular-level understanding of gas-MOF interactions can allow for the rational design of MOFs optimized for CWA degradation. Our research investigated the fundamental interfacial interactions between CWA simulant vapors, specifically sulfur mustard (HD) simulants, and zirconium-based MOFs (Zr-MOFs). Utilizing a custom-built ultrahigh vacuum chamber with infrared spectroscopic and mass spectrometric capabilities, the adsorption mechanism, diffusion energetics, and diffusion kinetics of HD simulants were determined. For 2-chloroethyl ethyl sulfide (2-CEES), a widely used HD simulant, infrared spectroscopy revealed that adsorption within Zr-MOFs primarily proceeded through hydrogen bond formation between 2-CEES and the bridging hydroxyls on the secondary building unit of the MOFs. Through the study of 1-chloropentane and diethyl sulfide adsorption, we determined that 2-CEES forms hydrogen bonds through its chlorine atom likely due to geometric constraints within the MOF pore environment. Temperature-programmed desorption experiments aimed at determining desorption energetics reveal that 2-CEES remain adsorbed within the pores of the MOFs until high temperatures, but traditional methods of TPD analysis fail to accurately measure both the enthalpic and entropic interactions of 2-CEES desorption from a single adsorption site. Infrared spectroscopy was able to measure the diffusion of adsorbates within MOFs by tracking the rate of decrease in overall adsorbate concentrations at several temperatures. The results indicate that 2-CEES diffusion through the pores of the MOFs is a slow, activated process that is affected by the size of the pore windows and presence of hydrogen bonding sites. We speculate that diffusion is the rate limiting step in the desorption of HD simulants through Zr-MOFs at lower temperatures. Stochastic simulations were performed in an attempt to deconvolute TPD data in order to extract desorption parameters. Finally, a combination of vacuum-based and ambient-pressure spectroscopic techniques were employed to study the reaction between 2-CEES and an amine-functionalized MOF, UiO-66-NH2. Although the presence of water adsorbed within UiO 66 NH2 under ambient conditions may assist in the reactive adsorption of 2-CEES, the reaction proceeded under anhydrous conditions. / Doctor of Philosophy / Chemical warfare agents (CWAs) are some of the most toxic chemicals on the planet and their continued use by terror groups and rogue nations threaten the lives of both civilians and the warfighter. Our work was motivated by a class of high surface area, highly porous materials that have shown the ability to degrade CWAs, specifically mustard gas, into less harmful byproducts. By determining the adsorption mechanism (how and where mustard gas “sticks” to the material), diffusion rates (how quickly mustard gas can travel through the pores of to reach the binding sites), and desorption energies (how strongly mustard gas “sticks” to the binding sites), we can alter the structure of these materials and to efficiently trap mustard gas and render it harmless. In the research described in this dissertation, we examined these fundamental interactions for a series of molecules that mimic the structure of mustard gas. and linear alkanes within several metal-organic frameworks with varying pore size. We observed the size of the pore environment affects the orientation that a given molecule sticks to binding sites as well as how quickly these compounds diffuse through the MOF. While the majority of these studies were conducted in a low-pressure environment that eliminated the presence of gas molecules in the atmosphere, research that exposed a MOF to a mustard gas mimic in an ambient environment demonstrated that gas molecules present in the atmosphere, especially water, can greatly impact the chemical interactions between mustard gas and zirconium-based MOFs.

The development of controllable drug delivery systems is crucial for reducing toxicity and minimizing off-target drug effects for patients undergoing chemotherapy. Metal–organic frameworks (MOFs) are a class of hybrid materials that have become of interest in the field of drug delivery. MOFs are composed of metal nodes and organic bridging ligands. MOFs have a wide range of desirable properties including chemical stability, high porosity, and structural tunability which have positioned them as successful drug carriers. Through judicious choice of linker, stimuli-responsive MOFs can be synthesized to achieve precise control over cargo release. Previously, our lab developed a novel light-responsive drug delivery system using a framework known as UiO-AZB (UiO= University of Oslo, AZB=4,4ʹ-azobenzenedicarboxylic acid). This MOF contains a photoswitchable azobenzene linker. Upon irradiation with ultraviolet light, the compound undergoes a structural change known as photoisomerization, resulting in degradation of the MOF structure and simultaneous release of encapsulated cargo. To improve the clinical relevance of our framework, we focus on developing synthetic methods for production of visible light-responsive azobenzene photoswitches. A green light-responsive MOF (UiO-AZB-F) containing a 4,4ʹ-(diazene-1,2- diyl)bis(3,5-difluorobenzoic acid) linker was developed as a drug delivery system for the treatment of colorectal cancer. Our work also focuses on optimizing various aspects of MOF design to maximize and diversify cargo loading and precisely control cargo release rates. A combined computational and experimental investigation of drug adsorption process reveals that the presence of solvent can significantly impact the adsorption of drug molecules within MOF pores. To address these concerns, a variety of drug loading procedures were screened to determine conditions for maximizing the loading of diverse drug cargoes. Conditions for the loading of single agents as well as chemotherapy cocktails were explored to expand the application of our delivery platform to other cancer types including lung, pancreatic, bladder and cervical. To modulate the release of cargo, a series of MOFs containing precise ratios of green light-responsive linker were synthesized to create a platform for sustained release. Remarkably, several MOF derivatives showed enhancement in drug adsorption, highlighting the important role of host–guest interactions in nanocarrier development. Holistically, this work highlights the promise of stimuli-responsive MOFs as drug delivery platforms. / Doctor of Philosophy / Cancer is one of the leading causes of death worldwide. In 2021, nearly 2 million people in the U.S. were diagnosed with cancer. For patients undergoing chemotherapy treatment, the side effects of potent chemotherapeutics are often debilitating. Drug- delivery systems serve as a promising platform for localizing the delivery of chemotherapeutic drugs within a diseased area. When chemotherapeutics are delivered precisely to tumor regions via drug delivery systems, systemic side effects are significantly diminished. In this work, a series of materials known as metal–organic frameworks (MOFs) are developed as carriers for chemotherapeutic cargo. Due to the incorporation of photoactivated compounds within the backbone, these MOFs can be degraded on-demand through green light irradiation. As the framework degrades into small molecule components, drug cargo is simultaneously released. Methods for maximizing MOF drug loadings, diversifying the types of cargo that can be incorporated, and modifying cargo release rates are also investigated. This work establishes stimuli-responsive MOFs as promising materials for on-demand drug delivery.

The work is focused on the investigation of synthesis and structure of crystalline coordination networks by combining first a row transition metal ion with one anionic and one neutral bridging ligand. In the field of crystalline coordination networks, the goal is to synthesize porous 3D crystalline coordination networks with molecular sized cavities. The materials are characterized by XRD and TGA. It is important to understand the structural topologies to develop practical applications, such as gas storage, gas separation, and catalysis. The bi- and tetra-dentate flexible imidazole ligands, 9,10-bis(imidazol-1-ylmethyl)anthracene (Chapter 2) and 1, 2, 4, 5-tetrakis(imidazol-1ylmethyl)benzene (Chapter 3), are synthesized and used as linkers to construct 1D, 2D, and 3D crystalline coordination networks with cobalt(II) or zinc(II) cations and H3BTC anions under solvothermal conditions. Two 1D chain networks, [M(HBTC²⁻)(C₂₂H₁₈N₄)(H₂O)₂]•H₂O, are constructed from M(Zn(II) or Co(II)), H₃BTC, and 9,10-bis(imidazol-1-ylmethyl)anthracene (Compound 2.1 and 2.2). These two 1D zigzag chains are linked into infinite 2D sheets by inter-chain π•••π stacking and hydrogen bonding. ⁺ Two 2D and one 3D cobalt(II) coordination networks are constructed from the tetradentate imidazole ligand and H3BTC. Compound 3.1 has a 2D corrugated sheet structure that is linked by inter-layer π•••π stacking and hydrogen bonding. Compound 3.2 has a 2D sheet structure. These sheets are interconnected by hydrogen bonds at the free acid group of the HBTC²⁻ ligand. Compound 3.3 forms a two fold interpenetrated 3D network structure. Void spaces in the structure are filled with six water molecules. Six 3D cobalt (II) coordination networks are constructed with bidentate rigid imidazole containing neutral ligands, 1,4-bis(imidazol-1-yl)benzene(L1), 1,4-bis(imidazol-1-yl)naphthalene(L2), and 9,10-bis(imidazol-1-yl)anthracene(L3), and H₂BDC or H₃BTC anion (Chapter 4). In 4.1-4.3, L1-L3 affects on degree of interpenetrations constructed with H₂BDC ligand. In 4.1 and 4.2 are interpenetrating 3D networks with no accessible void space. In 4.3, void spaces of 3D networks are filled with 2D sheets. Compounds 4.4-4.6 are prepared by different concentrations of starting materials and different solvents. In 4.4-4.6, L3 serves as a pillar building block to construct 3D networks by applying with H₃BTC ligand. The solvent exchange experiment for 4.4 is further discussed. / Ph. D.