21 |
A study of the effects of oxygen environment on the stoichiometry, phase assemblage and stability of BiSCCO 2212 and 2201 using EPMARowan, Fraser S. January 2001 (has links)
A method of performing accurate oxygen analysis on cuprate based superconducting materials was established using electron probe micro analysis (EPMA). A range of YBa<sub>2</sub>Cu<sub>3</sub>O<sub>δ</sub> ceramics with varying oxygen concentration were used to test the method. Using YBCO as a reference material, a suitable standard for oxygen analysis of Bi<sub>2</sub>Sr<sub>2</sub>CaCu<sub>2</sub>O<sub>δ</sub> (BiSCCO-2212) materials was obtained. This standard was used to perform full elemental analysis of a range of BiSCCO-2212 crystals, post annealed in pO<sub>2</sub>'s between 10<sup>-5</sup>-2atm. When the average Cu valence of each crystal was calculated and plotted as a function of the critical temperature (T<sub>c</sub>) for each crystal, it was shown that BiSCCO-2212 materials conformed to the 'universal' trend illustrated by most other HTS and did not exhibit anomalous behaviour as had been previously believed. The phase assemblage and superconducting properties of BiSCCO-2212 Ag-clad multifilamental wires, prepared using the powder-in-tube (PIT) method by BICC, were studied as a function of a time/temperature profile. pO<sub>2</sub> of the processing atmosphere was found to be the predominant factor in determining the stoichiometry of the 2212 phase within wires. The phase assemblage is not simply a function of pO<sub>2</sub> as previously believed and can be controlled, in part, by the post annealing temperature. Homogenisation of the phase assemblage in BiSCCO-2212 Ag-clad wires can be achieved by prolonged heating (96hrs) at an appropriate temperature. An investigation into the 10K superconducting BiSCCO phase has shown the Sr-rich solid solution to extend towards the ideal stoichiometry of 2:2:1 (Bi:Sr:Cu) with increasing pO<sub>2</sub>. Using a combination of high pO<sub>2</sub> (60atm) to achieve the appropriate Bi:Sr stoichiometry followed by post annealing in N<sub>2</sub> to adjust the oxygen content, it was possible to prepare single-phase ceramics of stoichiometry Bi<sub>2.11(2)</sub>Sr<sub>1.90(2)</sub>Cu<sub>0.99(2)</sub>O<sub>δ</sub> with a T<sub>c</sub>=10.5K(5).
|
22 |
Towards a Tephrochronology for the Lakselv Peat Sequence in Finnmark County, Northern Norway / Mot en Tefrokronologi för Torvsekvensen i Lakselv i Finnmark Län, Norra NorgeHöglund, Anny January 2017 (has links)
To provide an increased breadth in the knowledge of tephra dispersal, this pilot study examines a peat core from Lakselv in Finnmark County in northern Norway. Peat samples are exposed to burning, HCl, density separation and polarized light microscopy. One sample from a depth of 37.5-40 cm was analysed using an electron microprobe analyser (EMPA). At least two tephra horizons were identified, one at a depth of 12.5-17.5 cm and one at 37.5-40 cm. The lower horizon shows a chemical composition similar to eruptives from Jan Mayen and São Miguel, Azores while the origin of the upper horizon is unknown as no geochemical analysis was performed for that depth.
|
23 |
Fundamental studies of the electrochemical and flotation behaviour of pyrrhotiteMphela, Nthabiseng 14 August 2010 (has links)
Extensive research has shown that electrochemistry is one of the factors that govern the flotation of sulfide minerals. Flotation is often adversely affected by uncontrolled oxidation, which is also an electrochemical process. The interest in pyrrhotite recovery arose after observing that there is a substantial loss of PGM due to the depression of pyrrhotite and the subsequent loss of any PGMs associated with it. The first part of this study focuses on the influence of chemical composition and crystal structure on the electrochemical behaviour of pyrrhotite in a 0.05 M Na2B4O7 solution. Rest potential and polarisation resistance measurements, as well as anodic polarisation diagrams, showed that the magnetic 4C type pyrrhotite is anodically more reactive than the non-magnetic 6C type pyrrhotite. It was also shown in cathodic polarisation diagrams that the non-magnetic 6C type pyrrhotite is a better substrate for oxygen reduction and is less susceptible to oxidation. ToF-SIMS showed the formation of an oxide layer on the pyrrhotite surface after oxidation. In the second part of this work, the influence of galvanic interactions on the electrochemical behaviour of pyrrhotite in contact with pentlandite was investigated. It was observed that, under oxygen-saturated conditions, as the amount of pentlandite increases, the reactivity towards oxidation of the mixed mineral system is reduced. Impedance measurements showed a decrease in capacitance values, indicating the formation of a continuous oxide layer on the surface and an increase in oxide layer thickness with decreasing pentlandite content. Anodic polarisation diagrams showed that under oxygen-deficient conditions and in the low potential region, pentlandite behaves as an inert material and does not have an influence on the oxidation behaviour of pyrrhotite. Hence, the anodic activities of the different magnetic 4C type pyrrhotites from Sudbury Gertrude, Phoenix and Russia were compared. It was shown that the oxidation reactivity decreased in the following order: Sudbury Gertrude magnetic 4C pyrrhotite > Phoenix magnetic 4C pyrrhotite > Russian magnetic 4C pyrrhotite; it also varied according to location. In the transpassive region, higher anodic currents were observed on the mixed samples because both pentlandite and pyrrhotite reacts. The reactivity increased in the order: pure pyrrhotite (Russia) < medium-pentlandite (Sudbury Gertrude) < high-pentlandite (Phoenix). In the presence of potassium ethyl xanthate, there was no change in the initial anodic reactivities of the different pyrrhotites. The anodic polarisation diagrams of the pure and mixed samples showed a reduction in the maximum anodic peak current, suggesting the presence of xanthate on the surface, which hinders oxidation of the mineral surface. In addition, the influence of cleaning of oxidised pyrrhotite with gaseous carbon dioxide was studied, using electrochemical and microflotation measurements. Electrochemical measurements indicated that CO2 treatment resulted in depassivation of the oxidised surfaces; this was supported by ToF-SIMS measurements that demonstrated a reduction in the oxide layer thickness after CO2 treatment. Anodic polarisation diagrams showed a higher anodic peak current, indicating that the surface is more reactive. Gaseous carbon dioxide conditioning of oxidised pyrrhotite resulted in improved flotation response of pyrrhotite with the aid of copper activation and higher air flow rate. Copyright / Dissertation (MEng)--University of Pretoria, 2010. / Materials Science and Metallurgical Engineering / unrestricted
|
24 |
Zonation in tourmaline from granitic pegmatites & the occurrence of tetrahedrally coordinated aluminum and boron in tourmalineLussier, Aaron J. 06 1900 (has links)
[1] Four specimens of zoned tourmaline from granitic pegmatites are characterised in detail, each having unusual compositional and/or morphologic features: (1) a crystal from Black Rapids Glacier, Alaska, showing a central pink zone of elbaite mantled by a thin rim of green liddicoatite; (2) a large (~25 cm) slab of Madagascar liddicoatite cut along (001) showing complex patterns of oscillatory zoning; and (3) a wheatsheaf and (4) a mushroom elbaite from Mogok, Myanmar, both showing extensive bifurcation of fibrous crystals originating from a central core crystal, and showing pronounced discontinuous colour zoning. Crystal chemistry and crystal structure of these samples are characterised by SREF, EMPA, and 11B and 27Al MAS NMR and Mössbauer spectroscopies. For each sample, compositional change, as a function of crystal growth, is characterised by EMPA traverses, and the total chemical variation is reduced to a series of linear substitution mechanisms. Of particular interest are substitutions accommodating the variation in [4]B: (1) TB + YAl ↔ TSi + Y(Fe, Mn)2+, where transition metals are present, and (2) TB2 + YAl ↔ TSi2 + YLi, where transition metals are absent. Integration of all data sets delineates constraints on melt evolution and crystal growth mechanisms.
[2] Uncertainty has surrounded the occurrence of [4]Al and [4]B at the T-site in tourmaline, because B is difficult to quantify by EMPA and Al is typically assigned to the octahedral Y- and Z-sites. Although both [4]Al and [4]B have been shown to occur in natural tourmalines, it is not currently known how common these substituents are. Using 11B and 27Al MAS NMR spectroscopy, the presence of [4]B and [4]Al is determined in fifty inclusion-free tourmalines of low transition-metal content with compositions corresponding to five different species. Chemical shifts of [4]B and [3]B in 11B spectra, and [4]Al and [6]Al in 27Al spectra, are well-resolved, allowing detection of very small (< ~0.1 apfu) amounts of T-site constituents. Results show that contents of 0.0 < [4]B, [4]Al < 0.5 apfu are common in tourmalines containing low amounts of paramagnetic species, and that all combinations of Si, Al and B occur in natural tourmalines.
|
25 |
Zonation in tourmaline from granitic pegmatites & the occurrence of tetrahedrally coordinated aluminum and boron in tourmalineLussier, Aaron J. 06 1900 (has links)
[1] Four specimens of zoned tourmaline from granitic pegmatites are characterised in detail, each having unusual compositional and/or morphologic features: (1) a crystal from Black Rapids Glacier, Alaska, showing a central pink zone of elbaite mantled by a thin rim of green liddicoatite; (2) a large (~25 cm) slab of Madagascar liddicoatite cut along (001) showing complex patterns of oscillatory zoning; and (3) a wheatsheaf and (4) a mushroom elbaite from Mogok, Myanmar, both showing extensive bifurcation of fibrous crystals originating from a central core crystal, and showing pronounced discontinuous colour zoning. Crystal chemistry and crystal structure of these samples are characterised by SREF, EMPA, and 11B and 27Al MAS NMR and Mössbauer spectroscopies. For each sample, compositional change, as a function of crystal growth, is characterised by EMPA traverses, and the total chemical variation is reduced to a series of linear substitution mechanisms. Of particular interest are substitutions accommodating the variation in [4]B: (1) TB + YAl ↔ TSi + Y(Fe, Mn)2+, where transition metals are present, and (2) TB2 + YAl ↔ TSi2 + YLi, where transition metals are absent. Integration of all data sets delineates constraints on melt evolution and crystal growth mechanisms.
[2] Uncertainty has surrounded the occurrence of [4]Al and [4]B at the T-site in tourmaline, because B is difficult to quantify by EMPA and Al is typically assigned to the octahedral Y- and Z-sites. Although both [4]Al and [4]B have been shown to occur in natural tourmalines, it is not currently known how common these substituents are. Using 11B and 27Al MAS NMR spectroscopy, the presence of [4]B and [4]Al is determined in fifty inclusion-free tourmalines of low transition-metal content with compositions corresponding to five different species. Chemical shifts of [4]B and [3]B in 11B spectra, and [4]Al and [6]Al in 27Al spectra, are well-resolved, allowing detection of very small (< ~0.1 apfu) amounts of T-site constituents. Results show that contents of 0.0 < [4]B, [4]Al < 0.5 apfu are common in tourmalines containing low amounts of paramagnetic species, and that all combinations of Si, Al and B occur in natural tourmalines.
|
26 |
Estudo do compósito 3Y-TZP/Sisub(2)Nsub(2)O obtido por sinterização sem pressãoSANTOS, CARLOS A.X. 09 October 2014 (has links)
Made available in DSpace on 2014-10-09T12:51:50Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:08:58Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
|
27 |
Estudo do compósito 3Y-TZP/Sisub(2)Nsub(2)O obtido por sinterização sem pressãoSANTOS, CARLOS A.X. 09 October 2014 (has links)
Made available in DSpace on 2014-10-09T12:51:50Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:08:58Z (GMT). No. of bitstreams: 0 / Zircônia 3YTZP apresenta propriedades excelentes à temperatura ambiente, mas estas propriedades são afetadas pelo aumento da temperatura pois esta age negativamente sobre o mecanismo de transformação de fase induzida por tensão, que fortalece a tenacidade da matriz. A adição de Si3N4 e SiC em uma matriz de 3YTZP é muito interessante porque conduz à formação de oxinitreto de silício, melhorando as propriedades mecânicas tais como dureza e tenacidade, mas esta adição está limitada por várias dificuldades que se apresentam durante o processamento e sinterização destes materiais. Neste trabalho foi estudada a obtenção, por sinterização sem pressão, do compósito Y-TZP/Si2N2O, partindo-se da adição de 20vol%Si3N4-SiC em uma matriz de zircônia dopada com 3mol% de Y2O3 - 3YTZP, utilizando-se Al2O3 e Y2O3 como aditivos de sinterização. A mistura foi moída e moldada por prensagem isostática a frio. Amostras foram sinterizadas a 1500º, 1600º e 1700ºC por 2h sem pressão e em atmosfera ambiente, utilizando-se um leito de nitreto de silício. Após sinterização, as amostras foram caracterizadas por difração de raios-X. Foram medidas a densidade, tenacidade, dureza e resistência mecânica à flexão em temperatura ambiente. A estrutura do material foi observada em microscopia eletrônica de varredura e de transmissão, com mapeamento químico, para verificar a homogeneidade e morfologia das fases do compósito. A formação de Si2N2O foi observada no material sinterizado devido à reação entre os pós adicionados. O material obtido apresentou aumento de tenacidade e dureza com o aumento de temperatura de sinterização. As amostras apresentaram boa resistência à oxidação a 1000ºC. / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
|
28 |
Estudo da influência de impurezas e da qualidade das superfícies em cristais de brometo de tálio para aplicação como um detector de radiação / Methodology optimization of the thallium bromide crystal preparation for application as a radiation detectorSANTOS, ROBINSON A. dos 11 November 2016 (has links)
Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2016-11-11T13:09:25Z
No. of bitstreams: 0 / Made available in DSpace on 2016-11-11T13:09:25Z (GMT). No. of bitstreams: 0 / Neste trabalho, cristais de TlBr foram crescidos e purificados pelo método de Bridgman Repetido, a partir de sais comerciais de TlBr, e caracterizados para serem usados como detectores de radiação à temperatura ambiente. Para avaliar a eficiência de purificação, estudos da diminuição da concentração de impurezas foram feitos após cada crescimento, analisando as impurezas traço por Espectrometria de Massas com Plasma (ICP-MS). Um decréscimo significativo da concentração de impurezas em função do número de purificações foi observado. Os cristais crescidos apresentaram boa qualidade cristalina de acordo com os resultados de análise por Difração de Raios X (DRX), boa qualidade morfológica e estequiometria adequada de acordo com os resultados de análise por MEV(SE) e MEV(EDS). Um modelo matemático definido por equações diferenciais foi desenvolvido para avaliar as concentrações de impurezas no cristal de TlBr e suas segregações em função do número de crescimentos pelo método de Bridgman. Este modelo pode ser usado para calcular o coeficiente de migração das impurezas e mostrou ser útil para prever o número necessário de repetições de crescimento Bridgman para atingir nível de pureza adequado para assegurar a qualidade do cristal como detector de radiação. Os coeficientes se segregação obtidos são parâmetros importantes para análise microestrutural e análise de transporte de cargas nos cristais detectores. Para avaliar os cristais a serem usados como detectores de radiação, medidas de suas resistividades e resposta à incidência de radiação gama das fontes de 241Am (59,5keV) e 133Ba (81 keV) foram realizadas. Essa resposta foi dependente da pureza do cristal. Os detectores apresentaram um avanço significativo na eficiência de coleta de cargas em função da pureza. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
|
Page generated in 0.0595 seconds