Spelling suggestions: "subject:"microstrip match antenna"" "subject:"microstrip batch antenna""
1 |
Design of Microstrip Patch Antenna on Liquid Crystal Polymer (LCP) for Applications at 70GHzKhan, Jahanzeb January 2008 (has links)
<p>The demand of small size electronic systems has been increasing for several decades. The physical size of systems is reduced due to advancements in integrated circuits. With reduction in size of electronic systems, there is also an increasing demand of small and low cost antennas. Patch antennas are one of the most attractive antennas for integrated RF front end systems due to their compatibility with microwave integrated circuits. To fulfil the demand of integrated RF front end systems, a design of microstrip patch antenna with optimum performance at 70GHz is investigated. The procedure could be extended to design other planar antennas that act in a similar way.</p><p>In this work, three different design methods to design patch antennas for applications at 70GHz are investigated that include use of analytical models, numerical optimization, and numerical variation of dimensions. Analytical models provide a basic understanding of the operation of a patch antenna and they also provide approximate dimensions of a patch antenna for a targeted frequency without using numerical simulations. However, as the operating frequencies of RF systems reach mm-wave frequencies, we expect that the accuracy of analytical models become less accurate. For example, the excitation of substrate modes and effect of ground size are not predicted in simple analytical models.</p><p>Due to these expected limitations of the analytical design methods, the accuracy of these models is investigated by numerical electromagnetic field simulations. In this work, CST Microwave Studio Transient Solver is used for that purpose. In order to make sure that the appropriate settings of the solver are applied, the simulation settings such as mesh density, boundary conditions and the port dimensions are investigated. The simulation settings may affect computation time and convergence of the results. Here, in this work, the accuracy of the simulator for a specific design of inset feed rectangular patch antenna is verified. The patch dimensions obtained from analytical calculations are optimized at 70GHz by using the optimizer of the transient solver. The patch dimensions obtained from optimizer are verified by varying the patch dimensions in equidistant steps around the found result of the optimizer.</p><p>In a rectangular microstrip patch antenna design, the use of a width of 1.5 times the length is an approximate rule of thumb [1] for low dielectric constant substrates. It is also investigated how the performance properties of a microstrip patch antenna are affected by varying the width to length ratio of the patch. There are occasions where a different ratio is required because of space limitations, or to change the input impedance. The patch designs having various width to length ratios were optimized with the feed location.</p><p>The analytically calculated dimensions provided good initial values of the rectangular patch antenna for further optimization using more accurate techniques. The design have been optimized at 70GHz for the investigated mesh density, boundary conditions and the port dimensions. The numerical variation of dimensions is found to be most reliable among the investigated design methods but it is more complicated with many parameters.</p>
|
2 |
Design of Microstrip Patch Antenna on Liquid Crystal Polymer (LCP) for Applications at 70GHzKhan, Jahanzeb January 2008 (has links)
The demand of small size electronic systems has been increasing for several decades. The physical size of systems is reduced due to advancements in integrated circuits. With reduction in size of electronic systems, there is also an increasing demand of small and low cost antennas. Patch antennas are one of the most attractive antennas for integrated RF front end systems due to their compatibility with microwave integrated circuits. To fulfil the demand of integrated RF front end systems, a design of microstrip patch antenna with optimum performance at 70GHz is investigated. The procedure could be extended to design other planar antennas that act in a similar way. In this work, three different design methods to design patch antennas for applications at 70GHz are investigated that include use of analytical models, numerical optimization, and numerical variation of dimensions. Analytical models provide a basic understanding of the operation of a patch antenna and they also provide approximate dimensions of a patch antenna for a targeted frequency without using numerical simulations. However, as the operating frequencies of RF systems reach mm-wave frequencies, we expect that the accuracy of analytical models become less accurate. For example, the excitation of substrate modes and effect of ground size are not predicted in simple analytical models. Due to these expected limitations of the analytical design methods, the accuracy of these models is investigated by numerical electromagnetic field simulations. In this work, CST Microwave Studio Transient Solver is used for that purpose. In order to make sure that the appropriate settings of the solver are applied, the simulation settings such as mesh density, boundary conditions and the port dimensions are investigated. The simulation settings may affect computation time and convergence of the results. Here, in this work, the accuracy of the simulator for a specific design of inset feed rectangular patch antenna is verified. The patch dimensions obtained from analytical calculations are optimized at 70GHz by using the optimizer of the transient solver. The patch dimensions obtained from optimizer are verified by varying the patch dimensions in equidistant steps around the found result of the optimizer. In a rectangular microstrip patch antenna design, the use of a width of 1.5 times the length is an approximate rule of thumb [1] for low dielectric constant substrates. It is also investigated how the performance properties of a microstrip patch antenna are affected by varying the width to length ratio of the patch. There are occasions where a different ratio is required because of space limitations, or to change the input impedance. The patch designs having various width to length ratios were optimized with the feed location. The analytically calculated dimensions provided good initial values of the rectangular patch antenna for further optimization using more accurate techniques. The design have been optimized at 70GHz for the investigated mesh density, boundary conditions and the port dimensions. The numerical variation of dimensions is found to be most reliable among the investigated design methods but it is more complicated with many parameters.
|
3 |
COMPUTER-AIDED DESIGN OF CIRCULARLY-POLARIZED CONFORMAL MICROSTRIP PATCH ANTENNA FOR TELEMETRY APPLICATIONSWu, Doris I., Rieger, James 10 1900 (has links)
International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California / Planar microstrip antennas are desirable in many telemetry applications because they
are small in size, light in weight, and conformal to most surfaces. The design and
optimization of circularly-polarized omnidirectional microstrip arrays using a new
software simulation tool are discussed in this paper. Critical design issues such as the
optimization of each array element for circular polarization and the minimization of
mutual couplings as well as feed network mismatch are examined. The software tool,
which consists of a novel graphical user interface and a full-wave numerical simulator
for a flat mounting surface, provides a testbed environment for the user to explore new
designs as well as optimizing existing designs. Using this tool, the design of several
wraparound arrays with different mounting cylinder radii are presented. Comparisons
between measured and simulated data for two S-band 8-element wraparound arrays are
also presented.
|
4 |
Nositelná rektifikační anténa pro RF sklízení energie / Wearable rectifying antenna for RF energy harvestingKokolia, Martin January 2016 (has links)
The aim of this thesis is to design and rectena that would be able to integrate into a cloth thanks to use of textile substrate. The first part deals with the possibilities of using various communication channels and services for maximizing the useable power. Attention is focused mainly on the use of textile materials for implementing microstrip circuits. It is made valorization of all the typical characteristics and problems using different fabrics as a microwave substrate and the possibilities of realization of conductive structures of microwave patch antenna and microstrip circuits. At the second part are identified parameters and constraints used for the design of the overall device with a rectifying antenna, which will be after the verification of the function in real implementation used for the final concept using textile structures. The design is verified by simulations by CST Microwave Studio and Microwave Designer. The initial design is being gradually extended by other concepts, the use of other materials and technologies. Several design are made, their properties evaluated and the best ones are then compared based on real measurements.
|
5 |
Additive Manufacturing Techniques to Enhance the Performance of Electronics Created on Flexible andRigid SubstratesHamad, Aamir Hamed 24 August 2020 (has links)
No description available.
|
6 |
Design of an ultra-wideband microstrip antenna array with low size, weight and powerStaffan, Paul January 2019 (has links)
No description available.
|
7 |
Design and implementation of band rejected antennas using adaptive surface meshing and genetic algorithms methods : simulation and measurement of microstrip antennas with the ability of harmonic rejection for wireless and mobile applications including the antenna design optimisation using genetic algorithmsBinmelha, Mohammed Saeed January 2013 (has links)
With the advances in wireless communication systems, antennas with different shapes and design have achieved great demand and are desirable for many uses such as personal communication systems, and other applications involving wireless communication. This has resulted in different shapes and types of antenna design in order to achieve different antenna characteristic. One attractive approach to the design of antennas is to suppress or attenuate harmonic contents due to the non-linear operation of the Radio Frequency (RF) front end. The objectives of this work were to investigate, design and implement antennas for harmonic suppression with the aid of a genetic algorithm (GA). Several microstrip patch antennas were designed to operate at frequencies 1.0, 1.8 and 2.4 GHz respectively. The microstrip patch antenna with stub tuned microstrip lines was also employed at 1.0 and 1.8 GHz to meet the design objectives. A new sensing patch technique is introduced and applied in order to find the accepted power at harmonic frequencies. The evaluation of the measured power accepted at the antenna feed port was done using an electromagnetic (EM) simulator, Ansoft Designer, in terms of current distribution. A two sensors method is presented on one antenna prototype to estimate the accepted power at three frequencies. The computational method is based on an integral equation solver using adaptive surface meshing driven by a genetic algorithm. Several examples are demonstrated, including design of coaxially-fed, air-dielectric patch antennas implanted with shorting and folded walls. The characteristics of the antennas in terms of the impedance responses and far field radiation patterns are discussed. The results in terms of the radiation performance are addressed, and compared to measurements. The presented results of these antennas show a good impedance matching at the fundamental frequency with good suppression achieved at the second and third harmonic frequencies.
|
8 |
Design, modelling and implementation of antennas using electromagnetic bandgap material and defected ground planes : surface meshing analysis and genetic algorithm optimisation on EBG and defected ground structures for reducing the mutual coupling between radiating elements of antenna array MIMO systemsAbidin, Zuhairiah Zainal January 2011 (has links)
The main objective of this research is to design, model and implement several antenna geometries using electromagnetic band gap (EBG) material and a defected ground plane. Several antenna applications are addressed with the aim of improving performance, particularly the mutual coupling between the elements. The EBG structures have the unique capability to prevent or assist the propagation of electromagnetic waves in a specific band of frequencies, and have been incorporated here in antenna structures to improve patterns and reduce mutual coupling in multielement arrays. A neutralization technique and defected ground plane structures have also been investigated as alternative approaches, and may be more practical in real applications. A new Uni-planar Compact EBG (UC-EBG) formed from a compact unit cell was presented, giving a stop band in the 2.4 GHz WLAN range. Dual band forms of the neutralization and defected ground plane techniques have also been developed and measured. The recorded results for all antenna configurations show good improvement in terms of the mutual coupling effect. The MIMO antenna performance with EBG, neutralization and defected ground of several wireless communication applications were analysed and evaluated. The correlation coefficient, total active reflection coefficient (TARC), channel capacity and capacity loss of the array antenna were computed and the results compared to measurements with good agreement. In addition, a computational method combining Genetic Algorithm (GA) with surface meshing code for the analysis of a 2×2 antenna arrays on EBG was developed. Here the impedance matrix resulting from the meshing analysis is manipulated by the GA process in order to find the optimal antenna and EBG operated at 2.4 GHz with the goal of targeting a specific fitness function. Furthermore, an investigation of GA on 2×2 printed slot on DGS was also done.
|
9 |
Mikropáskové flíčkové antény napájené vlnovodem integrovaným do substrátu / Microstrip Patch Antennas Fed by Substrate Integrated WaveguideMikulášek, Tomáš January 2013 (has links)
Dizertační práce je zaměřena na výzkum mikropáskových flíčkových antén a anténních řad napájených vlnovodem integrovaným do substrátu (SIW). Využitím vlnovodu integrovaného do substrátu pro napájení mikropáskové flíčkové antény dochází ke kombinaci výhodných vlastností obou struktur. Výsledkem je kompaktní anténní struktura, jejíž napájecí vedení neprodukuje parazitní záření a neovlivňuje tak vyzařovací charakteristiku antény. Práci lze z věcného hlediska rozdělit do dvou částí. První část práce (kapitola 2) je zaměřena na návrh flíčkových antén a jejich navázání na vlnovod integrovaný do substrátu. První dvě navržené flíčkové antény využívají vlnovod integrovaný do substrátu a štěrbinu nebo koaxiální sondu pro buzení lineárně polarizované vlny. Napájení koaxiální sondou je dále použito pro buzení kruhově polarizované flíčkové antény. Za účelem získání širšího pásma osového poměru je navrženo napájení flíčkové antény ve dvou bodech. Funkčnost všech anténních struktur je popsána pomocí parametrických simulací a ověřena realizací a měřením vyrobených prototypů antén. Prezentované napájecí metody představují nový způsob napájení pro mikropáskové antény využívající technologii SIW. Ve druhé části práce (kapitola 3) je pojednáno o implementaci štěrbinou napájené mikropáskové anténní struktury do malých anténních polí o velikosti 2x2 a 1x4. V případě lineární řady je uvažováno amplitudové rozložení pro optimální potlačení postranních laloků. Obě navržené anténní řady jsou ověřeny měřením a v porovnání s podobnými anténními řadami dostupnými v literatuře dosahují širšího pracovního pásma kmitočtů a vyššího zisku.
|
10 |
Design and implementation of band rejected antennas using adaptive surface meshing and genetic algorithms methods. Simulation and measurement of microstrip antennas with the ability of harmonic rejection for wireless and mobile applications including the antenna design optimisation using genetic algorithms.Bin-Melha, Mohammed S. January 2013 (has links)
With the advances in wireless communication systems, antennas with different shapes and design have achieved great demand and are desirable for many uses such as personal communication systems, and other applications involving wireless communication. This has resulted in different shapes and types of antenna design in order to achieve different antenna characteristic. One attractive approach to the design of antennas is to suppress or attenuate harmonic contents due to the non-linear operation of the Radio Frequency (RF) front end.
The objectives of this work were to investigate, design and implement antennas for harmonic suppression with the aid of a genetic algorithm (GA). Several microstrip patch antennas were designed to operate at frequencies 1.0, 1.8 and 2.4 GHz respectively. The microstrip patch antenna with stub tuned microstrip lines was also employed at 1.0 and 1.8 GHz to meet the design objectives.
A new sensing patch technique is introduced and applied in order to find the accepted power at harmonic frequencies. The evaluation of the measured power accepted at the antenna feed port was done using an electromagnetic (EM) simulator, Ansoft Designer, in terms of current distribution. A two sensors method is presented on one antenna prototype to estimate the accepted power at three frequencies.
The computational method is based on an integral equation solver using adaptive surface meshing driven by a genetic algorithm. Several examples are demonstrated, including design of coaxially-fed, air-dielectric patch antennas implanted with shorting and folded walls. The characteristics of the antennas in terms of the impedance responses and far field radiation patterns are discussed. The results in terms of the radiation performance are addressed, and compared to measurements. The presented results of these antennas show a good impedance matching at the fundamental frequency with good suppression achieved at the second and third harmonic frequencies. / Home government
|
Page generated in 0.0828 seconds