The topic of this master thesis is dealing with selected parts of the constructional and technological project of laboratoty pavilion for technology of AS in Brno. Thesis is mainly focused for technological instructions of ground works, support of next building and solving of city center problems. Components of this thesis are evaluation plans and work place safety protocols. Next content of thesis are study of main technological phases, time and finanical plans, items budget, selected details, construction site equipment and design and verification of tower crain.

Subject of this work is pursuance technology of above-standard family house. This diploma thesis contains construction and technology report, technological prescriptions for important parts of buildings, technology report of plant building site, concepts of mechanical assembly, inspection and test plan, technology report of health and safety on the construction site. Budget, calculation and time planning, a drawing of the facilities of the construction site, description of transport relations is included in addendum. Work also contains part about use of Calcium silicate masonry and its comparation.

The aim of this thesis is compile building and technological project of new office building of the company ESKO-T in Třebíč. This is a two-storey building, build technology cast-in-place longitudinal reinforced concrete frame with mono-pitched roof. Work is consist of a possible solution of steel, concrete and formwork of rental shop to building. Building and technological project, technological regulation for concreting, draft machine configuration, documentation broker transport relations, the crane card and concrete pump, control od worte quality, time schedule and building budget rough upper construction, environmental protection, occupational safety and health, object work schedule and price comparison concreting with hanging silo for concrete and concrete pump.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

The subject of this diploma thesis is the elaboration of a construction technological project for the construction of an administrative building with garages in Prague. The building is located in an enclosed area in the Prague-Veleslavín district. The main subject of this thesis is the elaboration of a technical report, a coordination situation of the construction with broader relations of transport routes, a time and financial plan of construction - object, a study of implementation of main technological stages of building, a project of the site equipment, a design of main construction machines and mechanisms, a time plan of main building, a plan of material resources, a technological regulation for the implementation of monolithic ceiling structures, a quality control and testing plan for monolithic ceiling structures. The diploma thesis also includes the calculation of construction according to THU, a occupational health and safety plan, concreting economics, a noise study, a selected points LEED certification and a budget with site equipment costs.

In this diploma thesis deals with execution of ground works, foundation constructions, steel and armored concrete monolithic framework of the sales and service center in Prague. Establishment of the building will be done on armored concrete basement feet, strips and basement plate. The building is desinged in part as a steel framework and in part as a armored concrete framework. The building technological project contains for the phases primarily time and financial plan of object, technology prescription, time schedule, budget, model of the building site accessories, model of the machines, check and test plan, safety plan.

The diploma thesis is focused on the elaboration of a construction technology project for the construction of a new hospital pavilion in Český Krumlov. The thesis processes the preparation of construction and proposal of the organization of individual activities on the construction site in time sequence. The thesis contains technological regulations for the foundation of construction and realization of the monolithic frame on the 1st floor, which also includes drawings of the formwork of the ceiling slab and a scheme of formwork of columns and walls. Further contents are technological report, technological study of realization, transport relations, time and financial plans, complete construction site equipment for the whole construction phase, design of construction mechanisms and assessment of their suitability for use, resource balance, technological analysis, itemized budget, and occupational health protection for selected processes and noise studies dealing with the impact of building construction on the surrounding development.

Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.

The goal of this diploma thesis is to create a building technology project for construction of 4 flat houses within stage 3a. of the building project „Green town of Prague – Jarov, phase II“. The flat houses are in two pairs interconnected by basement, each is a 7 floor high reinforced concrete building with flat roof and is functionally connected to others by a terrace garden system. This document focuses on organisation and preparation of the construction. It includes building site equipment, cost calculation for setting up and servicing of the building site with graphical illustrations for selected construction phases. Additionally a detailed time schedule was created with a proposal for stream construction of the reinforced concrete scelet and lining in the pairs of interconnected buildings. A realization study of the main technological phases was also prepared. The diploma thesis covers in detail construction of reinforced steel scelet and circumferential casing including a layer of contact insulation system. A blueprint of formwork for walls and ceiling is included in the manual for construction of reinforced steel scelet. On these particular actions probationary and control plans were added. The required machinery set with detailed placement was also drafted. An itemized budget for the main building was prepared as well. Attached to this document is a detailed manual on how to use housing units including repairs and revisions plan for next 30 years. Part of this diploma thesis is also a detailed study covering the construction in relation to the surronding living and educational areas.

The main aim of the thesis is to design a new building of the mixed-use building in Brno. The building consists of two parts. One part consists of shops. The second part consists of offices and conference space. It is a building that has three floors above ground and one underground. In the basement there are a facilities and a garage. Shops are designed on the ground floor. There are offices on the second floor. Conference rooms are on the third floor. The building has a flat roof. The vertical load-bearing structures are designed from Porotherm ceramic blocks. In the core of the building, the vertical load bearing structures are designed as monolithic reinforced concrete walls. Columns are used in the building for the possibility of open space. The masonry of the basement consists of white bathtub. The floors are designed as folded from the Spiroll system. Internal non-load-bearing walls are designed from gypsum board with double cladding. The second part of the work deals with forced ventilation, cooling and central heating. In the third part of the project I deal with acoustics. The project was carried out in the Auotocad program. All constructions comply with valid standards and regulations.