The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.

The subject of this master’s thesis is elaboration of selected parts of the building tech-nology project of residential building Stepnice in Uherske Hradiste. Part of the project is technical report, estate road layout, studies of major technological stages, project of site equipment, design of major machines and mechanisms, technological regulations and control and test plans for prefabricated ceiling and masonry system. Attachment of this master´s thesis is drawings of site equipment, selected construction details, working safety, instructions for using the building, budget by items and a time plan. The aim of the project is to design appropriate and economically effective procedure for realization of the building.

The subject of this diploma thesis is the elaboration of the building project of Polyfunkční dům Sokolská 5. In the course of the diploma thesis is elaborated a summary technical report, report of building site and drawings for individual stages. The implementation of the waterproofing of the base structure and the reinforced concrete monolithic skeleton are subject to technological regulations and control and test plans. In this work the object time and financial plan, the use of machines and mechanisms and health and safety at work are also solved. For the main building objects, an item budget and a detailed schedule are prepared. Part of this work is also the calculation of the heat transfer through the envelope of the building.

The subject of my diploma thesis are selected parts of the construction technology project of the psychiatric clinic of the University Hospital Brno based on the provided project documentation. It is an extension of a new six-storey building to the existing buildings. The thesis contains a technical report to the construction technology project, the coordination situation of the construction, the situation of wider transport routes, time and financial plan by objects, study of the realization of the main technological stages, a site equipment design, a design of a machine set, technological regulation for monolithic structures, quality control and testing plan of monolithic structures, noise study and selected documents for LEED certification.

The subject of the diploma thesis is the solution of chosen parts of the construction technology project of the 1st phase of the construction „Komplex RD Slavkov, Pod Zlatou horou“. These are 4 semi-detached houses, overall 8 family houses. The work deals with technological regulations for the superstructure including roof, study of the realization of the construction technology project, design of the main construction machines and mechanisms and control and test plan. For the whole construction is elaborated time and financial plan in two variants, namely the gradual and current method of construction, and a detailed schedule for one semi-detached house. The technical report of the building site equipment is completed with the drawings, itemized budget of the building part of the house, noise study and specialization focused on the photovoltaic system, with an alternative solution to use solar collectors. The thesis also includes a case study of construction methods focused on the gradual and current method of construction.

This Máster´s thesis deals with technological project of building a Research Center of Information Technologies VUT Brno in Brno. This work includes technical reports SY and STP, site equipment, budget, calculation, time planning, inspection and test plan, mechanical assembly, estimate,technological regulations, environmental plan, contract for work and job security for this building.

Diploma Thesis „Polyfunctional building“. The work deals implementation project of polyfunctional building in Jihlava. Object is situated on Jihlava suburb in emerging part called „Horní Kosov“. Land is gently sloping from west to east. It continues for Buková street. The building has six floors and a basement. The basement is made from monolithic reinforced concrete. It is used as garages. Floors are made of ceramic bricks with isolation . First floor contains four commercial premises and main entry for housing part. Seventeen flats are situated from second to sixth floor. Sizes of apartments are 1+kitchen corner to 4+kitchen corner with terraces and balcony. Roofing is solved with simple flat roof. Heating will be ensured with central heating. Every apartment, commercial premises, shared premises are going to have it’s own gas boiler. Polyfunctional building is connected on a local road – Buková street, which is connected to new communication. Within multifunctional building twenty parking slots is designed at the basement. Next fourteen parking slots is designed outside.

Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.

The territory is located in the city of Brno, district Trnitá on the embankment of the river Svitava. The subject of the diploma thesis is the architectural study of the design of the urban spatial structure with intensive use of city urban area, designed in pre-diploma project, which preceded diploma thesis. The design will allow mixing of greater amount of different functions on a relatively small built-up area, which will reduce the requirements on transport and provide the inhabitant with various forms of housing, services and employment. The shape of object's ground plan is based on area, which is connected from three sides to access roads. The mass and spatial solution respects the surrounding buildings and uses existing bike trails and sidewalks in the southeastern part of the area. The basic matter of object is divided by three axes passing through the building, into three blocks linked by common internal block. This creates a square with a tree-lined atrium with seating under the trees. The shape of these three blocks is further formed by removing of the mass, which results into forming of atriums, terraces and balconies, which brings natural light into the interior while allowing illumination of the patio and surrounding buildings within the territory. This spatial structure is horizontally divided by functions. Designed here are underground public garages, passages with shops, services, administration / commerce and housing. Despite the diversity of functions, for the facade was chosen a unified character of white horizontal lines contrasting with the dark gray lines of windows and facade cladding.

The content of this thesis is the construction of new technological project of apartment buildings A and B in Olomouc. Residential buildings A and B are identical, but are differently oriented to the cardinal points. Buildings are designed terraces. Buildings have a 4th floor 1PP. The supporting structure is made of monolithic reinforced concrete columns and ceilings. Infill walls are composed of ceramic blocks. In the 1st floor are located garage, the other floors are designed as residential.