Abstract: A brief overview of this PhD thesis, The emergence of nanotechnology has stimulated both fundamental and industrially relevant studies of the catalytic activity of noble metal nanoparticles. Palladium, ruthenium and gold are well known catalysts when used in nanoparticle- based systems. This body of work endeavoured to investigate the catalytic activity of these noble metal nanoparticles through three studies as a briefly overviewed below. Study 1: Palladium is a well-known catalyst, even in bulk phases, but its high cost had driven industry towards its use in nanoparticle- based systems well before nanotechnology had attracted the attention of the media. Palladium nanoparticles often show remarkable catalytic activity and selectivity, particularly for the hydrogenation of some unsaturated hydrocarbons, such as alkenes, alkynes and unsaturated carbonyl compounds. The nature of supports can affect the catalytic activity and selectivity of metal-support interaction. Natural polymeric supports, such as wool, can be suitable for new generation of composite materials incorporating nanosized metal nanoparticles and have the added advantage of being “environmentally friendly”. Catalytic hydrogenation of cyclohexene to cyclohexane by palladium nanoparticles immobilized on wool was demonstrated by using a Parr high pressure hydrogenation set-up. The efficiency of the process was explored over loading rates from 1.6% to 2.6% of palladium nanoparticles (by weight) with a variety of particle sizes. Optimization of the reaction conditions including, stirring rate, amounts of reactants, gas pressure and target temperature, led to series of catalytic activity tests carried out for 5 or 24 hours (each) at 400psi H2 and 40 oC using a stirring rate 750 rpm. Product mixtures were analysed using gas chromatography (GC-FID) to determine conversions. Samples S1 and S2 proved to be the most active catalysts because the average Pd particle size was around ~5 nm and the particles were more accessible for the reactant (i.e., Pd particles were on the surface of wool). However, under the catalytic testing conditions studied, wool (Pd/wool) did not show advantages over commercially used palladium nanoparticles on activated carbon (Pd/C). Study 2: Ruthenium fabricated as noble metal nanoparticles can be catalytically active for hydrogenation of organic compounds. However, a challenging issue for researchers is that Ru nanocatalysts can be spontaneously deactivated due to effects, such as sintering or leaching of active components, oxidation of noble metal nanoparticles, inactive metal or metal oxide deposition and impurities in solvents and reagents. Calcination of noble metal nanoparticles is one option for reactivation of Ru nanoparticles immobilized on SiO2 (Ru/SiO2) utilized as nanocatalysts in chemical reactions. In fact, the catalytic activity of noble metal nanoparticles is known to be proportional to the active part of the surface area. The effects of calcinations on catalytic activity of “shape- specific” 0.1 wt% Ru/SiO2 for hydrogenation of cyclohexene to cyclohexane were investigated. Optimization of calcinations by varying temperature and time proved to be effective on the activity of nanocatalysts retaining the Ru nanocatalysts shapes for the hydrogenation of cyclohexene. Product mixtures were analysed using gas chromatography (GC-FID) to determine conversions. The Ru catalysts showed the highest activity (100%) when they were activated by calcination following protocol No.1 in a furnace under the mildest reductive conditions studied (temperature = 200 oC for 1 hour, which was the shortest calcination time). HRTEM study showed only minor deformation of the Ru nanoparticles and minimal aggregation for this type of activation. Study 3: Supported gold nanoparticles have excited much interest owing to their unusual and somewhat unexpected catalytic activity particularly with the selective oxidation of organic compounds. Gold nanoparticles immobilized on Norit activated carbon (Au101/C) via colloidal deposition gave high selectivity of benzyl alcohol oxidation. The presence of a base (K2CO3) increased the catalytic activity of gold nanocatalysts (which was negligible in the absence of base) through dehydrogenation of the alcohol via deprotonation of a primary OH groups, and helped overcome the rate-limitation step of the oxidation process. The interaction between the gold species and the support was investigated by measuring change in catalytic activity with different activation methods (i.e., washing with a solvent at elevated temperature, and/or followed by calcinations). A mixture of benzyl alcohol as a reactant, methanol as a solvent, K2CO3 as a base and oxygen gas was studied by the activated gold nanocatalysts using a mini reactor set-up. The efficiency of the process was explored by varying the amounts of benzyl alcohol and the base, target temperature, metal loading of the gold catalysts rate and the solvent, between 3 and 24 hours at 73 psi O2 and a stirring rate (750 rpm). The samples of the reaction mixture were centrifuged and analysed by highperformance liquid chromatography (HPLC) to determine conversions. The effect of size on the catalytic activity was studied for different types of gold particles (Au101, Aunaked and Aucitrate) and clusters (Au8 and Au9) immobilized on powder Norit activated carbon. The highest activity of benzyl alcohol oxidation was observed for activated 1.0 wt% Au101/C catalysts (washed with toluene and followed by calcination under vacuum at 100 oC for 3 h) for ~3.5 nm gold particles. Additionally, the support effect was studied for gold particles immobilized on different types of carbons, such as Norit activated carbon (powder, granular and powdered) and mesoporous carbons (CMK-3, CMK-8 and NCCR-41), granular modified carbon (–SH and –SO3H groups) and Vulcan carbon. The highest activity was observed by activated 1.0 wt% Au101/C8 catalysts (washed with toluene and followed by calcination under vacuum at 100 oC for 3 h). Activated 1% Au101/C41 (washed with toluene followed by calcination under vacuum at 100 oC for 3 hours) with 2.6 ± 0.1 nm gold particle size showed the highest selectivity towards methyl benzoate as a main product (S%: 88%) after 3 hours reaction time. However, activated 1% Au101/C (calcination in O2 -H2 at 100 oC for 3 hours) with 6.6 ± 0.3 nm gold particle size exhibited the highest selectivity towards benzoic acid as a main product (S: 86%) after 24 hours reaction time.Therefore, particle size and type of carbon support can be considered as playing crucial roles in defining the catalytic activity of gold nanocatalysts which were used for benzyl alcohol oxidation.

Metal oxide nanoparticles, both magnetic and nonmagnetic, have a multitude of applications in gas sensors, catalysts and catalyst supports, airborne trapping agents, biomedicines and drug delivery systems, fuel cells, laser diodes, and magnetic microwaves. Over the past decade, an inexpensive, simple, recyclable, and environmentally friendly large, scale synthesis method for the synthesis of these metal oxide nanoparticles has been sought. Many of the current techniques in use today, while good on the small, laboratory bench scale, suffer from drawbacks that make them unsuitable for the industrial scale. The aminolytic method, developed by Dr. Man Han while working for Dr. Zhang, fits industrial scale-up requirements. The aminolytic method involves a reaction between metal carboxylate(s) and oleylamine in a non-coordinating solvent. This system was shown to produce a range of spinel ferrites. Dr. Lisa Vaughan showed that this method can be recycled multiple times without degrading the quality of the produced nanoparticles. The purpose of this thesis is to test the versatility of the aminolytic method in the production of a wide range of metal oxides as well as various core/shell systems. Chapter 2 explores the effect of precursor carboxylates chain length on the aminolytic synthesis of cobalt ferrite, and manganese ferrite nanoparticles. In Chapter 3, a series of CuxMn1-xFe₂O₄, (x ranges from 0.0 to 0.2), nanoparticles were synthesized via the aminolytic method. This series allows for the investigation of the effects of orbital Jahn-Teller distortion as well as orbital angular momentum on the magnetic properties of this ferrite. The quantum couplings of magnetic ions in spinel ferrites govern their magnetic properties and responses. An understanding of the couplings between these metal ions allows for tailoring magnetic properties to obtain the desired response needed for various applications. Chapter 4 investigates the synthesis of MnO and Mn₃O₄ nanoparticles in pure single phase with high monodispersity. To the best of our knowledge, the range of sizes produced for MnO and Mn₃O₄ is the most extensive, and therefore a magnetic study of these systems shows some intriguing size dependent properties. The final part of this chapter investigates the applicability of the aminolytic method for building a MnO shell on a CoFe₂O₄ core. Chapter 5 explores the synthesis of another metal oxide, ZrO₂ in both the cubic and monoclinic phases with no impurities. The use of the aminolytic method here removes the need for dangerous/expensive precursors or equipment and eliminates the need for extensive high temperature heat treatments that destroy monodispersity which is required for most techniques. The creation of a core/shell system between CoFe₂O₄ and ZrO₂ using the aminolytic method was also tested. This core/shell system adds magnetic manipulation which is especially useful for the recovery of zirconia based photocatalyst. Chapter 6 studies the application of the aminolytic method in the synthesis of yttrium iron garnet (YIG) and yttrium iron perovskite (YIP) nanoparticles. Current synthesis techniques used to produce YIG and YIP nanoparticles often requires high temperatures, sensitive to contamination, which could be eliminated through the use of our method

This research focuses on the microwave properties of nanoparticles for use as contrast and hyperthermia agents. Currently, visible light is used for irradiation of nanoparticles as hyperthermia agents. Additionally, visible/Near-infrared light is used for photoacoustic tomography (PAT) imaging. Compared to optical wavelengths, frequencies in microwave range transmit through tissue with high penetration depth . Thus, deep cancerous cells and malignant tissue may be treated and imaged. These nanoparticles could enable the use of a hybrid microwave/acoustic technique known as thermoacoustic tomography. Here, quantitative measurements of the heat generation in super paramagnetic iron oxide nanoparticle (SPIONs), gold nanoparticles (AuNPs), and gold nanoclusters (AuNCs) induced by microwave energy at 3 GHz, are presented and compared. Based on our experiments, SPIONs are the most efficient nanoparticles for microwave heating. Very high concentrations of SPIONs are able to convert microwave energy into heat about 22° C more than DI-water. AuNPs, which support plasmon resonances, do not provide heat under microwave irradiation as predicted by our computational analysis based on Mie Theory. AuNCs are a new form of ultra-small (<2.5 nm) AuNPs which do not support plasmonic resonances and have supra-molecular properties such as sub-conduction band transitions. Interestingly, AuNCs have the potential to absorb microwave energy and may provide an alternative to SPIONs. These nanoparticles had not yet been studied before in this frequency region. In addition, the absorption coefficient of nanoparticles were calculated using complex permittivity data from a dip probe kit and a Vector Network Analyzer (VNA) in a broad band range from 500 MHZ to 10 GHz. This method allows identification of best frequency region with highest penetration depth. In the last step, the nanoparticles with different concentrations were tested as exogenous contrast agents in a Thermoacoustic Tomography (TAT) system. TAT utilizes the penetration depth of microwave energy while producing high resolution images through acoustic waves. The addition of an exogenous contrast agent improves image quality by more effectively converting microwave energy to heat. The experiment reveals that the time resolved thermoacoustic signal (TA) from SPIONs is stronger than AuNPs and AuNCs and thus, the image contrast produced by SPIONs is stronger than the two other aforementioned nanoparticles.

Semiconductor quantum dots (QDs) and gold nanoparticles (AuNPs) have gained tremendous attention in the last decade as a result of their size-dependent spectroscopic properties. These nanoparticles have been a subject of intense study to bridge the gap between macroscopic and atomic behavior, as well as to generate new materials for novel applications in therapeutics, biological sensing, light emitting devices, microelectronics, lasers, and solar cells. One of the most promising areas for the use of these nanoparticles is in biotechnology, where their size-dependent optical properties are harnessed for imaging and sensing applications. However, these nanoparticles, as synthesized, are often not stable in aqueous media and lack simple and reliable means of covalently linking to biomolecules. The focus of this work is to advance the progress of these nanomaterials for biotechnology by synthesizing them, characterizing their optical properties and rendering them water-soluble and functional while maintaining their coveted optical properties. QDs were synthesized by an organometallic chemical procedure that utilizes coordinating solvents to provide brightly luminescent nanoparticles. The optical interactions of these QDs were studied as a function of concentration to identify particle size-dependent optimal concentrations, where scattering and indirection excitation are minimized and the amount light observed per particle is maximized. Both QDs and AuNPs were rendered water-soluble and stable in a broad range of biologically relevant conditions by using a series of ligands composed of dihydrolipoic acid (DHLA) appended to poly(ethylene glycol) methyl ether. By studying the stability of the surface modified AuNPs, we revealed some interesting information regarding the role of the surface ligand on the nanoparticle stability (i.e. solubility in high salt concentration, resistance to dithiothreitol competition and cyanide decomposition). Furthermore, the nanoparticles were functionalized using a series of bifunctional ligands that contain a dithiol group (DHLA) for surface binding, a PEG segment to instill water-solubility and a terminal functional group for easy bioconjugation (i.e. NH 2 , COOH, or biotin). Finally, a sensing application was demonstrated to detect the presence of microbial DNA (unmethlylated CpG) by using Toll-like receptor 9 proteins as the recognition components and the QDs as the transduction elements via Förster Resonance Energy Transfer.

Thesis (Ph. D.)--University of Texas at Austin, 2008. / Vita. Includes bibliographical references.

Thesis (Ph. D.)--West Virginia University, 2008. / Title from document title page. Document formatted into pages; contains xii, 278 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references.

This thesis describes the synthesis, characterisation and catalytic testing of multifunctional immobilised metal nanoparticle in metal-organic framework (MOF) materials. Combining the activity of metal nanoparticles with the porosity and Lewis acidity of metal-organic frameworks provides a single catalytic material which can perform multi-step reactions. Strategies to immobilise the metal nanoparticles within the metal-organic frameworks have been investigated. Immobilisation has been achieved by applying three different methodologies. First, deposition of metal nanoparticle precursors within mesoporous MOFs is discussed. Chapter 3 shows the effectivity of the double solvents deposition technique to achieve dispersed and small nanoparticles of around 2.7 nm. The best system combined Pd nanoparticles with MIL-101(Cr). This system was further investigated in tandem reductive amination catalysis, discussed in Chapter 4, to investigate the activity and selectivity provided by these multifunctional catalysts. Another immobilisation technique was performed by coating Pd decorated SiO2 spheres with a MOF layer. Using this technique, MOF was grown cyclically in solution, providing tuneable shell thicknesses of MOF on the metal nanoparticle decorated oxide spheres. While the homogeneity of the MOF shell needs more optimisation, it was determined that the surface charge on the spheres played an important role in the growth of MOF in the desired location. Finally, the third immobilisation technique is the core-shell growth of MOF on colloidal metal nanoparticles. Polymer-capped metal nanoparticles with well-defined shapes were synthesised and characterised. From here, the optimisation of conditions for core-shell growth of UiO-66 and MIL-100(Sc) were investigated. Conditions which provided the desired core-shell morphology were found for both MOF types. These materials were then subsequently used in tandem reductive amination catalysis and a more straightforward styrene hydrogenation. It was shown that the metal nanoparticles remain active catalysts within either MOF shell and the MOF shell stabilises the metal nanoparticle and acts as a Lewis acid catalyst.

Magister Scientiae - MSc (Chemistry) / Pulmonary Tuberculosis (TB) a disease second to HIV/AIDS is a global health problem that arises in two states; as an active state and as a latent state. Diagnosis of active TB is tedious and requires expensive procedures since there is no recognizable method for the sole detection of active TB. The current diagnosis consists of chest X-rays and multiple sputum cultures used for acid-fast bacilli detection. The TB diagnosis of children is particularly difficult which further complicates the diagnosis. Thus, rapid identification of this pathogen is important for the treatment and control of this infection to allow effective and timely therapy. In an effort to solve this issue, this study reports the development of immunosensors constructed with electroactive layers of amino groups functionalized graphene oxide (GO) doped respectively with green synthesized zinc oxide (ZnO NPs) nanoparticles and silver (Ag NPs) nanoparticles on glassy carbon electrodes. The surface morphology of GO, ZnO NPs, Ag NPs and their composites was revealed by employing High-Resolution Transmission Electron Microscopy (HR-TEM) and High-Resolution Scanning Electron Microscopy (HR-SEM) while the composition and structure of these materials were studied using Fourier Transform Infra-Red Spectroscopy (FTIR). The resultant graphene oxide-metallic composites were covalently attached with CFP-10 and/or ESAT-6 antibodies to achieve the electrochemical detection. The immunosensor was then used for the impedimetric and amperometric detection of anti-CFP-10 and/or anti-ESAT-6 antigens in standard solutions.

The aim of this work is to prepare heterogeneous nanoparticles which means nanoparticles composed of more than one material. Our approach lies in in-flight modification of primary nanoparticles in the tubular sputtering system. Our tubular system contains copper target and we deposit copper onto the flying primary nanoparticles by magnetron sputtering. The main advantage of this approach is independence of fabrication of primary nanoparticles and their subsequent modification. At first we optimized fabrication of nanoparticles by the gas aggregation source on behalf of the next modification. We also characterized conditions in the tubular sputtering system. We found process in the tubular system to be very complex and sensitive to the changes of the operational parameters. There is a strong interaction between flying nanoparticles and the discharge in the tubular system. Due to this interaction the nanoparticles are trapped in the plasma and the deposition rate is pulsing. The result of this work is modification of nickel and silver nanoparticles, preparation of heterogeneous nanoparticles Ni/Cu and Ag/Cu. These heterogeneous nanoparticles vary in composition, shape and size according to the conditions in the tubular system. We also successfully prepared Janus nanoparticles which are interesting for their...

Among various nanomaterials, metal nanoparticles are the widely studied ones because of their pronounced distinct properties arising in the nanometer size regime, which can be tailored easily by tuning predominantly their size and shape. During the past few decades, scientists are engaged in developing new synthetic methodologies for the synthesis of metal nanoparticles which can be divided into two broad categories: i) top-down approach, utilizing physical methods and ii) bottom-up approach, employing chemical methods. As the chemical methods offer better control over particle size, numerous chemical methods have been developed to obtain metal nanoparticles with narrow size distribution. However, these two approaches have their own merits and demerits; they are not complementary to each other and also not sustainable for real time applications. Recent focus on the synthesis of metal nanoparticles is towards the development of green and sustainable synthetic methodologies. A solid state route is an exciting prospect in this direction because it eliminates usage of organic solvents thus, makes the overall process green and at the same time leads to the realization of large quantity of the materials, which is required for many applications. However, the major obstacle associated with the development of a solid state synthetic route is the lack of fundamental understanding regarding the formation mechanism of the nanoparticles in the solid state. Additionally, due to the heterogeneity present in the solid mixture, it is very difficult to ensure the proximity between the capping agent and nuclei which plays the most decisive role in the growth process. Recently, employment of amine–borane compounds as reducing agents emerged as a better prospect towards the development of sustainable synthetic routes for metal nanoparticles because they offer a variety of advantages over the traditional borohydrides. Being soluble in organic medium, amine– borane allows the reaction to be carried out in a single phase and due to its mild reducing ability a much better control over the nucleation and growth processes is realized. However, the most exciting feature of these compounds is that their reducing ability is not only limited to the solution state, they can also bring out the reduction of metal ions in the solid state. With the availability of a variety of amine–boranes of varying reducing ability, it opens up a possibility to modulate the nanostructure in both solid and solution states by a judicious choice of reducing agent. Although our current understanding regarding the growth behavior of nanoparticles has advanced remarkably, however, most often it is some classical model which is invoked to understand these processes. With the recent developments in in situ transmission electron microscopy techniques, it is now possible to unravel more complex growth trajectories of nanoparticles. These studies not only expand the scope of the present knowledge but also opens up possibilities for many future developments. Objectives • To develop an atom economy solid state synthetic methodology for the synthesis of metal nanoparticles employing amine–boranes as reducing agents. • To gain a mechanistic insight into the formation mechanisms of nanoparticles in the solid state by using amine–boranes with differing reducing ability. • Synthesis of bimetallic nanoparticles as well as supported metal nanoparticles in the solid state using ammonia borane as the reducing agent. • To develop a new in situ seeding growth methodology for the synthesis of core@shell nanoparticles composed of noble metals by employing a very weak reducing agent, trimethylamine borane and their transformation to their thermodynamically stable alloy counterparts. • Synthesis of highly monodisperse ultra-small colloidal calcium nanoparticles with different capping agents such as hexadecylamine, octadecylamine, poly(vinylpyrrolidone) and a combination of hexadecylamine/poly(vinylpyrrolidone) using the solvated metal atom dispersion (SMAD) method. To study the coalescence behavior of a pair of calcium nanoparticles under an electron beam by employing in situ TEM technique. Significant results An atom economy solid state synthetic route has been developed for the synthesis of metal nanoparticles from simple metal salts using amine–boranes as reducing agents. Amine–borane plays a dual role here: acts as a reducing agent thus brings out the reduction of metal ions and decomposes simultaneously to generate B-N based compounds which acts as a capping agent to stabilize the particles in the nanosize regime. This essentially minimizes the number of reagents used and hence simplifying and eliminating the purification procedures and thus, brings out an atom economy to the overall process. Additionally, as the reactions were carried out in the solid state, it eliminates use of organic solvents which have many adverse effects on the environment, thus makes the synthetic route, green. The particle size and the size distribution were tuned by employing amine–boranes with differing reducing abilities. Three different amine–boranes have been employed: ammonia borane (AB), dimethylamine borane (DMAB), and trimethylamine borane (TMAB) whose reducing ability varies as AB > DMAB >> TMAB. It was found that in case of AB, it is the polyborazylene or BNHx polymer whereas, in case of DMAB and TMAB, the complexing amines act as the stabilizing agents. Several controlled studies also showed that the rate of addition of metal salt to AB is the crucial step and has a profound effect on the particle size as well as the size distribution. It was also found that an optimum ratio of amine–borane to metal salt is important to realize the smallest possible size with narrowest size distribution. Whereas, use of AB and TMAB resulted in the smallest sized particles with best size distribution, usage of DMAB provided larger particles that are also polydisperse in nature. Based on several experiments along with available data, the formation mechanism of metal nanoparticles in the solid state has been proposed. Highly monodisperse Cu, Ag, Au, Pd, and Ir nanoparticles were realized using the solid state route described herein. The solid state route was extended to the synthesis of bimetallic nanoparticles as well as supported metal nanoparticles. Employment of metal nitrate as the metal precursor and ammonia borane as the reducing agent resulted in highly exothermic reaction. The heat evolved in this reaction was exploited successfully towards mixing of the constituent elements thus allowing the alloy formation to occur at much lower temperature (60 oC) compared to the traditional solid state metallurgical methods (temperature used in these cases are > 1000 oC). Synthesis of highly monodisperse 2-3 nm Cu/Au and 5-8 nm Cu/Ag nanoparticles were demonstrated herein. Alumina and silica supported Pt and Pd nanoparticles have also been prepared. Use of ammonia borane as the reducing agent in the solid state brought out the reduction of metal ions to metal nanoparticles and the simultaneous generation of BNHx polymer which encapsulates the metal (Pt and Pd) nanoparticles supported on support materials. Treatment of these materials with methanol resulted in the solvolysis of BNHx polymer and its complete removal to finally provide metal nanoparticles on the support materials. An in situ seeding growth methodology for the synthesis of bimetallic nanoparticles with core@shell architecture composed of noble metals has been developed using trimethylamine borane (TMAB) as the reducing agent. The key idea of this synthetic procedure is that, TMAB being a weak reducing agent is able to differentiate the smallest possible window of reduction potential and hence reduces the metal ions sequentially. A dramatic solvent effect was noted in the preparation of Ag nanoparticles: Ag nanoparticles were obtained at room temperature when dry THF was used as the solvent whereas, reflux condition was required to realize the same using wet THF as the solvent. However, no such behavior was noted in the preparation of Au and Pd nanoparticles wherein Au and Pd nanoparticles were obtained at room temperature and reflux conditions, respectively. This difference in reduction behavior was successfully exploited to synthesize Au@Ag, Ag@Au, and Ag@Pd nanoparticles. All these core@shell nanoparticles were further transformed to their alloy counterparts under very mild conditions reported to date. Highly monodisperse, ultrasmall, colloidal Ca nanoparticles with a size regime of 2-4 nm were synthesized using solvated metal atom dispersion (SMAD) method and digestive ripening technique. Hexadecylamine (HDA) was used as the stabilizing agent in this case. Employment of capping agent with a longer chain length, octadecylamine afforded even smaller sized particles. However, when poly(vinylpyrrolidone) (PVP), a branched chain polymer was used as the capping agent, agglomerated particles were realized together with small particles of 3-6 nm. Use of a combination of PVP and HDA resulted in spherical particles of 2-3 nm size with narrow size distribution. Growth of Ca nanoparticles via colaesence mechanism was observed under an electron beam. Employing in situ transmission electron microscopy technique, real time coalescence between a pair of Ca nanoparticles were detected and details of coalescence steps were analyzed.