Spelling suggestions: "subject:"nanoparticules""
1 |
Sledování vlastností nanokompozitních materiálů / Study of properties of nanocompositesHudec, Jiří January 2013 (has links)
This masters’s thesis study electric properties of nanocomposites based on epoxy resins, production of samples and measuring their electrical properties. In this thesis there are observed temperature dependences of the dissipation factor, relative permittivity and internal resistivity.
|
2 |
Deposition of Nanoparticles or Thin Films via Magnetron Sputtering Towards Graphene Surface Functionalization and Device FabricationLarson, Bridget Jul 05 August 2019 (has links)
No description available.
|
3 |
Type-I and Type-II Core-Shell Quantum Dots: Synthesis and CharacterizationDorfs, D., Hickey, Stephen G., Eychmüller, A. 21 December 2018 (has links)
Yes
|
4 |
Probing Atomic, Electronic, and Optical Structures of Nanoparticle Photocatalysts Using Fast ElectronsJanuary 2018 (has links)
abstract: Photocatalytic water splitting has been proposed as a promising way of generating carbon-neutral fuels from sunlight and water. In one approach, water decomposition is enabled by the use of functionalized nano-particulate photocatalyst composites. The atomic structures of the photocatalysts dictate their electronic and photonic structures, which are controlled by synthesis methods and may alter under reaction conditions. Characterizing these structures, especially the ones associated with photocatalysts’ surfaces, is essential because they determine the efficiencies of various reaction steps involved in photocatalytic water splitting. Due to its superior spatial resolution, (scanning) transmission electron microscopy (STEM/TEM), which includes various imaging and spectroscopic techniques, is a suitable tool for probing materials’ local atomic, electronic and optical structures. In this work, techniques specific for the study of photocatalysts are developed using model systems.
Nano-level structure-reactivity relationships as well as deactivation mechanisms of Ni core-NiO shell co-catalysts loaded on Ta2O5 particles are studied using an aberration-corrected TEM. It is revealed that nanometer changes in the shell thickness lead to significant changes in the H2 production. Also, deactivation of this system is found to be related to a photo-driven process resulting in the loss of the Ni core.
In addition, a special form of monochromated electron energy-loss spectroscopy (EELS), the so-called aloof beam EELS, is used to probe surface electronic states as well as light-particle interactions from model oxide nanoparticles. Surface states associated with hydrate species are analyzed using spectral simulations based on a dielectric theory and a density of states model. Geometry-induced optical-frequency resonant modes are excited using fast electrons in catalytically relevant oxides. Combing the spectral features detected in experiments with classical electrodynamics simulations, the underlying physics involved in this excitation process and the various influencing factors of the modes are investigated.
Finally, an in situ light illumination system is developed for an aberration-corrected environmental TEM to enable direct observation of atomic structural transformations of model photocatalysts while they are exposed to near reaction conditions. / Dissertation/Thesis / Doctoral Dissertation Materials Science and Engineering 2018
|
5 |
Functionalization of 1D and 2D Nanostructures and Their ApplicationsLi Sip, Yuen Yee 01 January 2023 (has links) (PDF)
Material discovery and development has been playing a significant role in shaping human civilizations, by studying and improving materials for appealing observations to aid in our survival as well as to satisfy our curiosity. From the common earthly materials that give us strong building structures and hunting weapons to the Silicon Age that contributes to the creation of modern electronics and computers, the development of novel and enhanced materials continues to grow. Recently, a new field has emerged that is rapidly expanding the engineering circle; these are called nanomaterials. By shrinking bulk materials into structures with nanoscale dimensions, there is a deviation from classical physics, and quantum effects begin to dominate the properties of these materials. The nanometer range brings a high surface area-volume ratio which enhances the reactivity of the material, and thus size-dependent properties are materialized. Such behaviors can be applicable in several areas such as biomedical, catalysis, optics, processing, sensing and more. Nanomaterials can be further functionalized to grant new and enhanced functions, features and capabilities needed for a specific application. This dissertation aids to explore the functionalization of 1D and 2D nanomaterials for various applications. The proposed 1D and 2D nanostructures for testing will be polymer hydrogel nanofibers and silica nanoparticulate thin films, respectively. Nanofibers are unique by acting like swollen nanoreactors to enable functionalization via aqueous absorption and reaction. Silica nanoparticulate films have high nano-porosity, which can wet the thin coating intrinsically with aqueous and organic solvents or with non-organic solvents upon additional surface chemistry modification. In this dissertation, the functionalization of 1D and 2D nanostructures with chemical compounds and metal colloids will be tested, and the performance of the nanomaterials and nanocomposites for various applications will be evaluated.
|
6 |
Improvement in the bioavailability of poorly water-soluble drugs via pulmonary delivery of nanoparticlesYang, Wei 23 October 2009 (has links)
High throughput screening techniques that are routinely used in modern drug
discovery processes result in a higher prevalence of poorly water-soluble drugs. Such
drugs often have poor bioavailability issues due to their poor dissolution and/or
permeability to achieve sufficient and consistent systemic exposure, resulting in sub-optimal
therapeutic efficacies, particularly via oral administration. Alternative
formulations and delivery routes are demanded to improve their bioavailability.
Nanoparticulate formulations of poorly water-soluble drugs offer improved dissolution
profiles. The physiology of the lung makes it an ideal target for non-invasive local and
systemic drug delivery for poorly water-soluble drugs.
In Chapter 2, a particle engineering process ultra-rapid freezing (URF) was
utilized to produce nanostructured aggregates of itraconazole (ITZ), a BCS class II drug, for pulmonary delivery with approved biocompatible excipients. The obtained
formulation, ITZ:mannitol:lecithin (1:0.5:0.2, w/w), i.e. URF-ITZ, was a solid solution
with high surface area and ability to achieve high magnitude of supersaturation. An
aqueous colloidal dispersion of URF-ITZ was suitable for nebulization, which
demonstrated optimal aerodynamic properties for deep lung delivery and high lung and
systemic ITZ levels when inhaled by mice.
The significantly improved systemic bioavailability of inhaled URF-ITZ was
mainly ascribed to the amorphous morphology that raised the drug solubility. The effect
of supersaturation of amorphous URF-ITZ relative to nanocrystalline ITZ on
bioavailability following inhalation was evaluated in Chapter 3. The nanoparticulate
amorphous ITZ composition resulted in a significantly higher systemic bioavailability
than for the nanocrystalline ITZ composition, as a result of the higher supersaturation that
increased the permeation.
In Chapter 4, pharmacokinetics of inhaled nebulized aerosols of solubilized ITZ
in solution versus nanoparticulate URF-ITZ colloidal dispersion were investigated, under
the hypothesis that solubilized ITZ can be absorbed faster through mucosal membrane
than the nanoparticulate ITZ. Despite similar ITZ lung deposition, the inhaled solubilized
ITZ demonstrated significantly faster systemic absorption across lung epithelium relative
to nanoparticulate ITZ in mice, due in part to the elimination of the phase-to-phase transition of nanoparticulate ITZ. / text
|
7 |
Synthesis of Biocompatible Nanoparticulate Coordination Polymers for Diagnostic and Therapeutic ApplicationsKandanapitiye, Murthi S. 27 April 2015 (has links)
No description available.
|
8 |
Fenômeno fotoeletrocatalítico mediada por UV/TiO2: da rápida imobilização do TiO2 P25 em eletrodos de ouro ao seu comportamento na fotooxidação do sistema modelo EDTA em células de camada delgada irradiadas por LED UV / The photoelectrocatalytic phenomenon mediated by UV/TiO2: from the quick immobilization of the P25 TiO2 on gold electrodes to its behavior on the photooxidation of the model system EDTA in thin layer-type cells irradiated by UV LEDBaccaro, Alexandre Luiz Bonizio 22 February 2017 (has links)
O demorado tratamento térmico, comum no preparo de fotocatalisadores e sua imobilização em substratos, foi contornado nesta tese, em que se investigaram duas estratégias de modificação de eletrodos de ouro com TiO2 P25. A primeira consiste em promover a formação de uma nanocamada pela simples exposição do metal por 1 min à suspensão aquosa de TiO2 (10 g L-1 em HCl 0,1 mol L-1); na segunda, deposita-se uma pequena alíquota (5 ou 8 µL) da suspensão diretamente no substrato (drop coating) para secá-lo em seguida por irradiação com lâmpada incandescente (60 W a 20 cm), obtendo-se bons resultados de uma a três camadas depositadas. Comprovou-se grande aumento da estabilidade da suspensão aquosa e duplicação da atividade fotocatalítica do nanofilme de TiO2 em decorrência da repulverização de P25 comercial em almofariz, melhoria inalcançável por sonicação da suspensão. O tamanho de partícula médio obtido por DLS para o TiO2 disperso em meio de HCl 0,1 mol L-1 atingiu 103±3 nm, enquanto que o filme depositado na superfície do ouro (observado por MEV e caracterizado por EDS) não ultrapassou 100 nm de espessura, sendo dominado por partículas de diâmetro de 20 (anatase) a 30 nm (rutilo), observadas por MET. A estabilidade da suspensão é susceptível ao ânion do ácido utilizado, sendo que resultados igualmente satisfatórios foram obtidos com HCl e HclO4 0,1 mol L-1, enquanto que para a mesma concentração de H2SO4 o TiO2 sofreu sedimentação rápida e o eletrodo preparado com a suspensão apresentou fotoatividade 10x menor. Filmes de espessuras bastante distintas (100 nm e 2 m) depositados a partir de suspensão 10 g L-1 por contato e drop coating com gota de 5,0 µL, respectivamente, foram comparados em relação à sua capacidade de transporte de elétrons e resposta eletroquímica ao Fe(CN)6 3 1,0 mmol L-1, sendo que a carga líquida formal de oxidação do EDTA 1,0 mmol L-1 é apenas 50 % maior para o filme 20x mais espesso, além de gerar distorções consideráveis nas ondas voltamétricas do sistema-sonda reversível em relação ao filme nanométrico e à superfície polida. Com eletrodos modificados pelo protocolo otimizado de drop coating (8,0 µL de TiO2 2 g L-1), testou-se o efeito da presença de diferentes eletrólitos de suporte (ácidos 0,1 mol L-1) em processos anódicos de fotooxidação em geral. A curva de decaimento da fotocorrente iph com o tempo pode ser descrita por uma equação de decaimento exponencial duplo iph = i0 + A1 exp(k1t) + A2 exp( k21t), permitindo distinguir as contribuições da fotocorrente de oxidação da água (i0) e de termos referentes a dois tipos de sítio superficiais, sendo um de cinética rápida e outro de cinética lenta. A seguinte ordem foi determinada para a fotocorrente total inicial (iph0 total) dos eletrólitos: HNO3 > HClO4 > HCl > H1SO4 > H3PO4 e as explicações propostas para tal se embasam na adsortividade dos ânions no TiO2 e na reatividade dos respectivos traps formados. O mesmo modelo de ajuste matemático foi utilizado para avaliar a fotoatividade do eletrodo modificado pela sua irradiação sucessiva e repetida em HNO3 0,1 mol L-1 (sem EDTA), sendo observada redução significativa principalmente nos parâmetros relativos aos sítios de reação e, assim, sugere-se um impedimento dos mesmos através, p. ex., da formação de peróxidos superficiais. Na presença também de EDTA, a carga líquida total despendida na sua fotooxidação se mantém relativamente constante nas sucessivas irradiações. Por fim, os experimentos de fotooxidação do EDTA sob varredura de potencial revelaram uma região de relação linear entre a fotocorrente e o potencial aplicado ao eletrodo modificado com TiO2 que se estende até a região de saturação de fotocorrente ser atingida, comportamento compatível com filmes nanoparticulados porosos não-dopados. A inclinação da região linear aumenta em função da [EDTA], como se os valores de condutância (di/dE) se elevassem dependendo da reação interfacial. Ajuste de modelo matemático hiperbólico correlacionando a (foto)resistência do filme em função da fotocorrente de saturação R = R0 + kIsph1, fornece resistência ôhmica do filme R0 de 5,0 kΩ e uma constante atrelada ao fotopotencial de 237 mA Ω. Já a curva monotônica de fotocorrente de saturação (Isph) com a [EDTA] apresenta comportamento linear até cerca de 0,7 mmol L-1, sugerindo-se que nessa região o controle por transporte de massa é a etapa limitante do processo global. Acima dessa concentração o coeficiente angular diminui gradualmente à medida que a reação de cinética de captura das lacunas passa a ser o determinante até um limite máximo (aparentemente 5,0 mmol L-1 de EDTA, nas condições do experimento) onde a disponibilidade de lacunas fotogeradas passa a governar. / The lengthy thermal treatment is a common step during the preparation and immobilization of photocatalysers on substrates, which by the way, was overcome in this thesis by the investigation of two strategies of modification of gold electrodes with P25 TiO2. The first one consists in promoting the formation of a nanolayer by the simple exposure of the metal surface to an aqueous suspension of TiO2 (10 g L-1 on 0.1 mol L-1 HCl) during 1 min; the second involves the deposition of a small drop (5 or 8 L) of the suspension on the gold substrate (drop coating) and its drying by irradiation with an incandescent lamp (60 W at 20 cm far), with worthy results also for two or three deposited layers. The stability of this aqueous suspension was appreciably improved by the repulverization of commercial P25 in a grinding mortar. As a consequence the photocatalytic activity conferred to the electrode by the formation of the TiO2 nanofilm doubled. Such improvements cannot be attained by bath sonication of the suspension. The average particle size determined by DLS for the TiO2 dispersed in 0.1 mol L-1 HCl was 103±3 nm, while the film deposited on the surface of gold consisted of particles of 20 nmn (anatase) and 30 nm (rutile) characterized by TEM and barely achieved a thickness of 100 nm (characterized by SEM and EDS). The stability of the modifying suspension is susceptible to the type of anion of the electrolyte. Good results were found with 0.1 mol L-1 HCl and HClO4, but not with 0.1 mol L-1 H2SO4. This last medium causes fast sedimentation of TiO2 and generates electrodes with one tenth of the photoactivity achieved with the other acids. The effect of film thickness on the photoactivity was evaluated for films with 100 nm and 2.0 µm prepared from a 10 g L-1 TiO2 suspension by the contact and drop coating (5 µL) strategies, respectively. The electron transport across both films and the electrochemical response for the 1.0 mmol L-1 Fe(CN) 63- probe was compared. The formal net charge for the 1.0 mmol L-1 EDTA oxidation was only 50 % higher for the 20x thicker film that also considerably distorts the voltammetric waves of the aforementioned reversible probe. The effect of different supporting electrolytes (0.1 mol L-1 acids) on the anodic photooxidation processes in general was tested with electrodes modified by an optimized drop coating protocol (8.0 µL of 2 µg L-1 TiO2). The curve describing the photocurrent decay in function of time might be ascribed to an equation of double exponential decay iph = i0 + A1 exp(k1t) + A2 exp (k2t), which allows the distinction of the contribution of water oxidation (i0) from terms of two types of surface sites: a kinetically fast site and a slow one. The total initial photocurrent (iph0 total) of the following electrolytes decays in the order: HNO3 > HClO4 > HCl > H2SO4 > H3PO4; explanations comprise the adsorbability of each respective anion on TiO2 and the reactivity of the corresponding traps formed. Similar curve fitting applied to the data of photoactivity of the gold electrode during successive irradiations of its surface in 0.1 mol L-1 HNO3 (absence of EDTA) revealed that sites reactivities underwent considerable reduction. It is suggested that during repetitive experiments the sites are impaired by the formation of surface peroxides. However, in the presence of 1.0 mmol L-1 of EDTA, the formal net charge of oxidation of the organic species remains almost unaltered. Ultimately, the experiments concerning the photooxidation of EDTA under linear potential scan revealed a region of linear relation between the photocurrent and the potential applied to the electrode modified with a TiO2 film (nanometric or micrometric), which holds until the saturation photocurrent is attained. This behavior is typical for porous non-doped nanoparticulate electrodes. The slope of the linear region increase somewhat with the EDTA concentration, as though the conductance values (di/dE) were raised depending on the interfacial reaction rate. The fitting of a hyperbolic model R = R0 + kIsph-1 for the correlation of the (photo)resistence (R) of the film with the photocurrent of saturation (Isph) allows the estimation of an ohmic resistance of 5.0 kΩ, and a photopotential related constant of 237 mA Ω. The curve of correlation between Isph and the [EDTA] is linear fit until 0.7 mmol L-1, suggesting that in this initial region the mass transport to the interface is the limiting step of the global process. Above that concentration, the slope of the curve is gradually reduced as the kinetic of capture of the holes becomes the determining step and from 5.0 mmol L-1 on an asymptotic Isph is reached (under the conditions of the experiments), where the holes photogeneration might start governing.
|
9 |
Nanoparticle formulations of poorly water soluble drugs and their action in vivo and in vitroPurvis, Troy Powell 01 February 2011 (has links)
Poorly water soluble drugs have been manipulated to make them more soluble, increasing the bioavailability of these drugs. Several cryogenic processes allow for production of drug nanoparticles, without mechanical stress that could cause degradation. The Ultra Rapid Freezing (URF) process is a technique which improves water solubility of drugs by reducing primary drug particle size by producing amorphous solid dispersions. Heat conduction is improved, using a cryogenic material with a high thermal conductivity relative to the solution being frozen to maintain the surface temperature and heat transfer rate while the solution is being frozen. With URF technology, the freezing rate is fixed, which drives the particle formation and determines its characteristics. Supersaturation of drug in aqueous solution can allow for better absorption of the drug via the oral and pulmonary routes. Drug formulations that supersaturate the dissolution media show the possibility for increased bioavailability from an amorphous drug form. If the concentration of drug in solution is significantly increased, higher chemical potential will lead to an increase in flux across an exposed membrane, leading to higher blood levels for an amorphous drug, compared to an identical crystalline formulation. During oral delivery, supersaturated drug concentrations would also saturate PGP efflux sites in the gut lumen, increasing the drug's bioavailability. Saturated PGP sites show zero order efflux kinetics, so increasing the drug concentration in supersaturated biological fluid will increase serum drug levels. High supersaturation levels maintained for prolonged periods would have a beneficial effect on a drug's absolute bioavailability. Pulmonary administration offers therapeutic advantages over more invasive routes of administration. Limited amount of metabolizing enzymes like CYP 3A4 in lung tissue along with avoidance of first pass metabolism are advantages to pulmonary delivery. The objective of the research presented in this dissertation is to show the versatility of nanoparticulate poorly water soluble drug formulations. Due to the reduced particle size and the URF manufacturing process, a wide range of applications can be used with these nanoparticles. Oral and pulmonary administration routes can be explored using nanoparticles, but in vitro cell culture testing can show clinical benefits from this type of processing technology. / text
|
10 |
Fenômeno fotoeletrocatalítico mediada por UV/TiO2: da rápida imobilização do TiO2 P25 em eletrodos de ouro ao seu comportamento na fotooxidação do sistema modelo EDTA em células de camada delgada irradiadas por LED UV / The photoelectrocatalytic phenomenon mediated by UV/TiO2: from the quick immobilization of the P25 TiO2 on gold electrodes to its behavior on the photooxidation of the model system EDTA in thin layer-type cells irradiated by UV LEDAlexandre Luiz Bonizio Baccaro 22 February 2017 (has links)
O demorado tratamento térmico, comum no preparo de fotocatalisadores e sua imobilização em substratos, foi contornado nesta tese, em que se investigaram duas estratégias de modificação de eletrodos de ouro com TiO2 P25. A primeira consiste em promover a formação de uma nanocamada pela simples exposição do metal por 1 min à suspensão aquosa de TiO2 (10 g L-1 em HCl 0,1 mol L-1); na segunda, deposita-se uma pequena alíquota (5 ou 8 µL) da suspensão diretamente no substrato (drop coating) para secá-lo em seguida por irradiação com lâmpada incandescente (60 W a 20 cm), obtendo-se bons resultados de uma a três camadas depositadas. Comprovou-se grande aumento da estabilidade da suspensão aquosa e duplicação da atividade fotocatalítica do nanofilme de TiO2 em decorrência da repulverização de P25 comercial em almofariz, melhoria inalcançável por sonicação da suspensão. O tamanho de partícula médio obtido por DLS para o TiO2 disperso em meio de HCl 0,1 mol L-1 atingiu 103±3 nm, enquanto que o filme depositado na superfície do ouro (observado por MEV e caracterizado por EDS) não ultrapassou 100 nm de espessura, sendo dominado por partículas de diâmetro de 20 (anatase) a 30 nm (rutilo), observadas por MET. A estabilidade da suspensão é susceptível ao ânion do ácido utilizado, sendo que resultados igualmente satisfatórios foram obtidos com HCl e HclO4 0,1 mol L-1, enquanto que para a mesma concentração de H2SO4 o TiO2 sofreu sedimentação rápida e o eletrodo preparado com a suspensão apresentou fotoatividade 10x menor. Filmes de espessuras bastante distintas (100 nm e 2 m) depositados a partir de suspensão 10 g L-1 por contato e drop coating com gota de 5,0 µL, respectivamente, foram comparados em relação à sua capacidade de transporte de elétrons e resposta eletroquímica ao Fe(CN)6 3 1,0 mmol L-1, sendo que a carga líquida formal de oxidação do EDTA 1,0 mmol L-1 é apenas 50 % maior para o filme 20x mais espesso, além de gerar distorções consideráveis nas ondas voltamétricas do sistema-sonda reversível em relação ao filme nanométrico e à superfície polida. Com eletrodos modificados pelo protocolo otimizado de drop coating (8,0 µL de TiO2 2 g L-1), testou-se o efeito da presença de diferentes eletrólitos de suporte (ácidos 0,1 mol L-1) em processos anódicos de fotooxidação em geral. A curva de decaimento da fotocorrente iph com o tempo pode ser descrita por uma equação de decaimento exponencial duplo iph = i0 + A1 exp(k1t) + A2 exp( k21t), permitindo distinguir as contribuições da fotocorrente de oxidação da água (i0) e de termos referentes a dois tipos de sítio superficiais, sendo um de cinética rápida e outro de cinética lenta. A seguinte ordem foi determinada para a fotocorrente total inicial (iph0 total) dos eletrólitos: HNO3 > HClO4 > HCl > H1SO4 > H3PO4 e as explicações propostas para tal se embasam na adsortividade dos ânions no TiO2 e na reatividade dos respectivos traps formados. O mesmo modelo de ajuste matemático foi utilizado para avaliar a fotoatividade do eletrodo modificado pela sua irradiação sucessiva e repetida em HNO3 0,1 mol L-1 (sem EDTA), sendo observada redução significativa principalmente nos parâmetros relativos aos sítios de reação e, assim, sugere-se um impedimento dos mesmos através, p. ex., da formação de peróxidos superficiais. Na presença também de EDTA, a carga líquida total despendida na sua fotooxidação se mantém relativamente constante nas sucessivas irradiações. Por fim, os experimentos de fotooxidação do EDTA sob varredura de potencial revelaram uma região de relação linear entre a fotocorrente e o potencial aplicado ao eletrodo modificado com TiO2 que se estende até a região de saturação de fotocorrente ser atingida, comportamento compatível com filmes nanoparticulados porosos não-dopados. A inclinação da região linear aumenta em função da [EDTA], como se os valores de condutância (di/dE) se elevassem dependendo da reação interfacial. Ajuste de modelo matemático hiperbólico correlacionando a (foto)resistência do filme em função da fotocorrente de saturação R = R0 + kIsph1, fornece resistência ôhmica do filme R0 de 5,0 kΩ e uma constante atrelada ao fotopotencial de 237 mA Ω. Já a curva monotônica de fotocorrente de saturação (Isph) com a [EDTA] apresenta comportamento linear até cerca de 0,7 mmol L-1, sugerindo-se que nessa região o controle por transporte de massa é a etapa limitante do processo global. Acima dessa concentração o coeficiente angular diminui gradualmente à medida que a reação de cinética de captura das lacunas passa a ser o determinante até um limite máximo (aparentemente 5,0 mmol L-1 de EDTA, nas condições do experimento) onde a disponibilidade de lacunas fotogeradas passa a governar. / The lengthy thermal treatment is a common step during the preparation and immobilization of photocatalysers on substrates, which by the way, was overcome in this thesis by the investigation of two strategies of modification of gold electrodes with P25 TiO2. The first one consists in promoting the formation of a nanolayer by the simple exposure of the metal surface to an aqueous suspension of TiO2 (10 g L-1 on 0.1 mol L-1 HCl) during 1 min; the second involves the deposition of a small drop (5 or 8 L) of the suspension on the gold substrate (drop coating) and its drying by irradiation with an incandescent lamp (60 W at 20 cm far), with worthy results also for two or three deposited layers. The stability of this aqueous suspension was appreciably improved by the repulverization of commercial P25 in a grinding mortar. As a consequence the photocatalytic activity conferred to the electrode by the formation of the TiO2 nanofilm doubled. Such improvements cannot be attained by bath sonication of the suspension. The average particle size determined by DLS for the TiO2 dispersed in 0.1 mol L-1 HCl was 103±3 nm, while the film deposited on the surface of gold consisted of particles of 20 nmn (anatase) and 30 nm (rutile) characterized by TEM and barely achieved a thickness of 100 nm (characterized by SEM and EDS). The stability of the modifying suspension is susceptible to the type of anion of the electrolyte. Good results were found with 0.1 mol L-1 HCl and HClO4, but not with 0.1 mol L-1 H2SO4. This last medium causes fast sedimentation of TiO2 and generates electrodes with one tenth of the photoactivity achieved with the other acids. The effect of film thickness on the photoactivity was evaluated for films with 100 nm and 2.0 µm prepared from a 10 g L-1 TiO2 suspension by the contact and drop coating (5 µL) strategies, respectively. The electron transport across both films and the electrochemical response for the 1.0 mmol L-1 Fe(CN) 63- probe was compared. The formal net charge for the 1.0 mmol L-1 EDTA oxidation was only 50 % higher for the 20x thicker film that also considerably distorts the voltammetric waves of the aforementioned reversible probe. The effect of different supporting electrolytes (0.1 mol L-1 acids) on the anodic photooxidation processes in general was tested with electrodes modified by an optimized drop coating protocol (8.0 µL of 2 µg L-1 TiO2). The curve describing the photocurrent decay in function of time might be ascribed to an equation of double exponential decay iph = i0 + A1 exp(k1t) + A2 exp (k2t), which allows the distinction of the contribution of water oxidation (i0) from terms of two types of surface sites: a kinetically fast site and a slow one. The total initial photocurrent (iph0 total) of the following electrolytes decays in the order: HNO3 > HClO4 > HCl > H2SO4 > H3PO4; explanations comprise the adsorbability of each respective anion on TiO2 and the reactivity of the corresponding traps formed. Similar curve fitting applied to the data of photoactivity of the gold electrode during successive irradiations of its surface in 0.1 mol L-1 HNO3 (absence of EDTA) revealed that sites reactivities underwent considerable reduction. It is suggested that during repetitive experiments the sites are impaired by the formation of surface peroxides. However, in the presence of 1.0 mmol L-1 of EDTA, the formal net charge of oxidation of the organic species remains almost unaltered. Ultimately, the experiments concerning the photooxidation of EDTA under linear potential scan revealed a region of linear relation between the photocurrent and the potential applied to the electrode modified with a TiO2 film (nanometric or micrometric), which holds until the saturation photocurrent is attained. This behavior is typical for porous non-doped nanoparticulate electrodes. The slope of the linear region increase somewhat with the EDTA concentration, as though the conductance values (di/dE) were raised depending on the interfacial reaction rate. The fitting of a hyperbolic model R = R0 + kIsph-1 for the correlation of the (photo)resistence (R) of the film with the photocurrent of saturation (Isph) allows the estimation of an ohmic resistance of 5.0 kΩ, and a photopotential related constant of 237 mA Ω. The curve of correlation between Isph and the [EDTA] is linear fit until 0.7 mmol L-1, suggesting that in this initial region the mass transport to the interface is the limiting step of the global process. Above that concentration, the slope of the curve is gradually reduced as the kinetic of capture of the holes becomes the determining step and from 5.0 mmol L-1 on an asymptotic Isph is reached (under the conditions of the experiments), where the holes photogeneration might start governing.
|
Page generated in 0.1095 seconds