1 |
Förslag på ytterväggskonstruktion för småhus : Analys med hänsyn till energi, statik, fukt och kostnad / A proposal for exterior wall construction for houses : Analysis considering static, energy, moisture and costSchöllin, Anton, Widell, Mark January 2013 (has links)
I detta examensarbete studeras kommande energikrav för byggnader i Sverige och i synnerhet kraven på specifik energianvändning. Detta mot bakgrund av EU-kommissionens och EU-parlamentets direktiv, EPBD2, om nära nollenergibyggnader 2020. Därefter bearbetas ett förslag på en ny ytterväggskonstruktion som med lägre U-värde än den befintliga ytterväggen ska sänka Fiskarhedenvillans olika hustypers specifika energianvändning. Syftet med sänkningen är att möjliggöra för Fiskarhedenvillan att uppfylla de kommande energikraven. Det är många parametrar som måste uppfyllas och det nya ytterväggsförslaget analyseras förutom ur energisynpunkt även med hänsyn till statik, fukt och kostnad. Beräkningar för statik och specifik energianvändning har gjorts för ett referenshus. Resultatet av att byta ut den befintliga ytterväggskonstruktionen mot det framarbetade förslaget med ca 33 % lägre U-värde gav endast en sänkning med ca 6 % av den specifika energianvändningen. För att sänka referenshusets specifika energianvändning ytterligare bör även resterande delar av klimatskalet förbättras samt ett annat uppvärmningssätt väljas. Avslutningsvis diskuteras resultatet och vi lämnar rekommendationer för fortsatta studier. / This thesis studies future energy requirements for buildings in Sweden and in particular the requirements for specific energy use. This is in light of the European Commission and European Parliament Directive, EPBD2, on nearly-zero energy buildings 2020. A proposal for a new exterior wall construction in Fiskarhedenvillan houses with lower U-value than the existing exterior wall is analyzed. The purpose of the new wall is to reduce the specific energy use to enable Fiskarhedenvillan to meet the future energy requirements. There are many parameters that must be considered. The proposed new exterior wall construction is analyzed not only from the energy point of view but also with regard to statics, moisture and cost. Calculations for the statics and the specific energy use have been made for a reference building. The changed design of the exterior wall resulted in a reduction of the U-value with 33 % but only 6 % of the specific energy use. A further reduction of the specific energy use for the reference house requires improved design of the remaining building envelope and a new heating method. Furthermore the results are discussed and recommendations for further studies are given,
|
2 |
Penzion / Boarding HouseKryštofová, Iveta January 2022 (has links)
The aim of the diploma thesis is the processing of the design documentation for the construction of a boarding house with nearly zero energy consumption. The plot is located in the cadastre unit Znojmo-Louka, in a buildable area for recreation. The new building is detached, with partial basement, and has two floors. There is a preparation area in the one-storey section, including a dining area. Accommodation units can be found in a two-storey segment. And there is a technical background of the building in the basement. The vertical load-bearing system is made of ceramic blocks and concrete poured fittings used in the basement. The horizontal structures are formed cast-in-place reinforced slabs. The building is covered with a warm flat vegetation roof and a cold roof made of truss girders. The building is insulated with a contact thermal insulation system made of polystyrene. The building is based on deep piles and foundation reinforced concrete strips.
|
3 |
Environmentální řešení administrativního objektu v Hodoníně / Environmental solution of administrative building in HodonínSnášel, Michal Unknown Date (has links)
The aim of this master thesis is to design a seven-storey office building in Hodonín, Czechia. The building has retail spaces in the basement and first floor and offices in second to sixth floors and utility room and elevator engine room in the seventh floor. Individual floors are accessible via stairs and elevator. The vertical load-bearing structure consists of reinforced concrete walls and columns. Horizontal load-bearing structure consists of cast-in-place reinforced concrete slabs. The roof is flat with photovoltaic power plant connected to main battery. The main source of heating energy for the building is a heat pump (air-water) backed by a secondary electric boiler. Fresh air is supplied by a HVAC unit installed on the roof. Overheating due to solar heat gains and equipment is mitigated by local AC ceiling units. Automated roller blinds reacting to solar gains and glare are installed over the windows. The next part of thesis consists of comparison of pressure properties of sheet metal duct and CLIMAVER system.
|
4 |
[en] DISCUSSION OF THE POSSIBILITIES TO ACHIEVE A NEARLY ZERO ENERGY BUILDING (NZEB) USING THE BIM APPROACH / [pt] DISCUSSÃO DAS POSSIBILIDADES DE OBTENÇÃO DE UM EDIFÍCIO COM BALANÇO DE ENERGIA PRÓXIMO A ZERO (NZEB) USANDO A ABORDAGEM BIMALEXANDRE SANTANA CRUZ 28 December 2020 (has links)
[pt] Uma arquitetura que exige uma enorme demanda de energia contraria o conceito de um Edifício de Energia Quase Zero (em inglês Nearly Zero Energy Building - NZEB). Pesquisas indicam que edifícios de alto desempenho podem ser alcançados com um design integrado que combina estratégias de eficiência energética, como vidro de alto desempenho, com energia fotovoltaica. A metodologia BIM pode incorporar a Análise de Desempenho do Edifício para apoiar a tomada de decisão de um projeto integrado, essa abordagem é considerada essencial para alcançar um NZEB bem-sucedido. A presente investigação inclui uma revisão sistemática da literatura que orientou a pesquisa. Com base na SLR, foi desenvolvido um Manual de Entrega de Informações que propõe um novo fluxo de trabalho no qual os estudos de energia são realizados nos estágios iniciais do design para alcançar projetos com maior eficiência energética e aproveitar a colaboração intrínseca à metodologia BIM. Por fim, é apresentado um experimento hipotético de um edifício comercial para ilustrar o fluxo de trabalho proposto no IDM desenvolvido. O software Autodesk Revit foi usado para modelar o edifício e a simulação energética foi realizada no software DesignBuilder. Verificou-se que, para que esses dois softwares fossem interoperáveis, o modelo precisava ser exportado do Revit no formato gbXML. As opções de design foram baseadas na proporção de janela/parede (30 por cento, 50 por cento e 100 por cento), no vidro adotado e no sistema fotovoltaico. A análise de viabilidade econômica foi realizada com base no Valor Presente Líquido e na Taxa Interna de Retorno. Os resultados indicaram que o uso da fachada norte para produção fotovoltaica combinado com o sistema fotovoltaico da cobertura forneceu um balanço de energia próximo de zero na maioria dos casos. Por fim, todos os casos analisados têm um tempo de retorno de investimento inferior a garantia do fabricante dos módulos fotovoltaicos (25 anos), exceto no caso com 100 por cento de relação janela/parede e vidro PV na fachada norte. / [en] An architecture that requires a huge energy demand goes against the concept of a Nearly Zero Energy Building (NZEB). Research on the subject indicates that high performing buildings can be achieved with an integrated design that combines energy efficiency strategies, such as high performing glass, with photovoltaic energy (PV). The Building Information Modeling (BIM) methodology can incorporate Building Performance (BP) analysis to support decision making of an integrated design, which is considered essential to achieve a successful NZEB. The present investigation includes a Systematic Literature Review (SLR) that guided the research. Based on the SLR, an Information Delivery Manual was developed that propose a new workflow in which the energy studies are performed in the early stages of design to achieve more energy efficient projects and take advantage of the collaboration intrinsic to the BIM methodology. Lastly, a hypothetical experiment of a commercial building is presented to illustrate the workflow proposed in the developed IDM. The Autodesk Revit software was used to model the building and the energy computer simulation was performed in the DesignBuilder software. It was found that for these two software tools to be interoperable, the model had to be exported from Revit in gbXML format. The design options in the experiment were based on window-to-wall ratio (30 per cent, 50 per cent and 100 per cent), on the adopted glass, and on the photovoltaic system. The economic feasibility analysis was performed based in the Net Present Value (NPV) and the Internal Rate of Return (IRR). The results indicated that the use of the north facade for PV production combining with the PV roof system provided a nearly zero energy balance in most of the cases. Finally, all cases analyzed had a payback time of less than the PV module manufacturer guarantee (25 years), except for the case with 100 per cent window-to-wall ratio and PV Glass in the north facade.
|
5 |
Retrofitting a Single-family Home with Increased Use of Renewable EnergyMa, Chenwen January 2017 (has links)
Buildings account for up to 40% of the total energy use in the world. Directives from the European Union have pointed out the significance of increasing the energy efficiency in buildings. New regulation in countries like Sweden has established that new buildings should fulfil regulations of Nearly Zero Energy Buildings (NZEB), providing the opportunity for renewable energy technologies to achieve these goals. In this paper, the retrofitting potential of renewable energy technologies for a single-family home in Sweden was investigated.The present work studied the characteristics of several renewable energy technologies and their applications for a single-family home in Sweden, including biomass, solar photovoltaics, solar thermal, heat pump, and small-scale wind turbine. Three renewable energy technologies (solar thermal, heat pump and small-scale wind turbine) and one renovation method (window) were selected to investigate. The analysis was made of the current energy use and the potential energy (and cost) savings from each retrofitting of these facilities by means of simulation models using IDA ICE software. The study results show that the proposed renewable energy technologies are technically feasible and economically viable as a source of alternative renewable energy in order to produce clean energy and reduce electricity bills for an electric-heated single-family home located in Sweden. Moreover, the combined retrofitting scheme consist of solar thermal system and window renovation was also proposed and explored. As a result the energy performance of the single-family home would satisfy the nearly-zero energy building requirements and thermal comfort could be maintained at an acceptable level.
|
6 |
Vzduchotechnika pro budovy s téměř nulovou spotřebou energie / Ventilation of nearly Zero Energy BuildingFrčka, Lukáš January 2020 (has links)
This diploma thesis is focused on nearly zero energy buildings, which are a mandatory part of construction of the buildings in Czech republic after 2020. It also deals with HVAC and its design as part of these buildings. The theoretical part deals with legal and technical regulations and possible savings in HVAC systems. The computational part is focused on two solution of HVAC systems in given object. The project part is about the given object, which is otevřená zahrada Brno. This building was founded by Nadace Partnerství s.r.o.. This third part of diploma thesis deals with the quality of indoor microclimate and evaluation of the heat recovery system effiency, which is applied in local HVAC unit.
|
7 |
Revitalizace víceúčelového objektu obce / Revitalization of a multi-purpose building in the villageFederla, Jakub January 2022 (has links)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
8 |
Mateřská škola / KindergartenFrieb, Vilém January 2022 (has links)
The aim of this master project is to design a nearly zero-energy building of kindergarten. The kindergarten is designed as one storey building with capacity of 40 children split into two playrooms. Playrooms are separated and each of them has own sanitary facilities and locker room. Playrooms have large windows with external blinds on the south to provide solar gains. There is horizontal sun breaker above the windows which prevent overheating in summer. Load bearing walls are made of sand lime blocks. Walls are insulated with mineral wool board. Roof ceiling is made of prestressed concrete slabs. The building has a flat extensive green roof. The second task of the project includes design of lighting, rainwater harvesting, HVAC, source of heat and photovoltaic system. The third part is theoretical and includes searching for an ideal source of energy for the building. There are two types of heating compared such as gas boiler and a groundwater heating pump. The main software used for the project is Revit.
|
9 |
Mateřská škola Elišky Přemyslovny / Eliška Přemyslovna KindergartenHerůdek, Pavel January 2022 (has links)
The subject of my diploma thesis is a design of new kindergarten and elaboration of documentation for the construction. The building is situated in the southwestern suburb of Brno, in the district Brno-Starý Lískovec district. The building is set in a slightly sloping terrain. The building has two floors and and basement, created by partial basement of the building. The building is characterized with two wings designed at right angles and a decent coloured facade. The building contains two kindergarten classrooms with a capacity of 48 children with operational facilities, a rentable part for public, the administrative of the school and a technical facilities of the building. The first floor contains two separate kindergarten classes, each with 24 children, teacher's cabinet, toy storage room and a kitchen. The kitchen is designed without food preparation, with a food delivery company. Each kindergarten class has its own entrance. On the second floor is a rentable space containing a classroom, workshop, lounge and terrace. There are also an isolation room, a gym for children and a head master's office. The building is designed to a low energy standard, definated by near zero heat energy building (nzeb) standarts. There is established a wheelchair access to the building, A lift is proposed in the building. The structural design is proposed as a ceramic block wall with contact insulation system. The vertical strucutres are made of reinforced concrete cast-in-place ceiling. The building is based on concrete foundation and is covered by a single-skin, flat roof with a layer of extensive flora.
|
10 |
Budova školky s téměř nulovou spotřebou energie / Nearly-zero energy KindergartenRyšavý, Daniel Unknown Date (has links)
The master project is consists of three parts. The aim of the first and second part is to design kindergarten building, its technical equipment and management systems. The third part deals with energy, financial and environmental comparison of different wall construction composition. The kindergarten is single-storey building without basement and is located in Náchod, Czech Republic. Building is based on strip footing and structural system is masonry wall system with flat roof. Material of both load-bearing and non-bearing walls are sand-lime blocks. External walls are insulated by external thermal insulation composite system. Vertical structures are designed from prestressed Spiroll concrete floor slabs. The roof is designed as a warm flat half-intensive green roof. The building site contains also outdoor parking lot and a garden with a playground and a pond.
|
Page generated in 1.2642 seconds