The Ph.D. thesis was focused on EPR study of redox reactions of selected types of phenols, secondary amines and diperoxy coumpounds. Within the study some redox agents were employed in nonpolar, in some special cases also in polar solvents. EPR spectra of generated radical products were interpreted using spectral simulation. Study of radical reactions under participation of phenols was preferentially concentrated on the behavior of para methyl substituted phenols, where the instability of this substituent in relation to the applied redox agents was evaluated. The tendency towards the abstraction of hydrogen from methyl group, representing the paralell mechanism to the hydrogen abstaction from phenolic OH group was proved. The generated benzyl radicals were undirectly detected in the form of adducts with aromatic nitroso compounds. These adducts undergo the consecutive transformations, leading to the formation of new types of phenoxy radicals. The study of the decomposition of NH bonds was performed with substituted N,N´-paraphenylenediamines, 1-anilino-1-phenylpentane-3-ones and amino substituted 1,3-dimethyluracils. By the oxidation with 3-chloroperbenzoic acid the corresponding nitroxyl radicals were prepared. In the case of 1-anilino-1-phenylpentane-3-ones the aminyl radicals were prepared by the oxidation with PbO2, which existence was evidenced by spin trapping method with nitrosobenzene. In the framework of the investigation of the decomposition of -O-O- bonds the oxygen centred radicals, generated from peroxidic compounds of Luperox type using selected redox agents were detected by spin trapping method. The analysis of EPR spectra documented that primary alkoxyl radicals undergo the consecutive fragmentation, which leads in the presence of oxygen to the formation of secondary alkoxyl radicals. The generation of oxygen centred radicals during the decomposition was indirectly proved in the presence of model phenolic compounds, where due to the abstraction of hydrogen from phenolic OH group the phenoxyl radicals are formed.

This doctoral thesis is dedicated to the synthesis and characterization of novel functionalized hybrid structures for biomedical purposes. Systems reported in this work can be subdivided into the two main groups: natural-based materials and synthetic amphiphilic block copolymers. Both groups were studied as perspective theranostic agents for medical applications. In the first group, natural polysaccharides glycogen and mannan were selected as starting materials for preparation of novel nanoconjugates that possess ability for multimodal detection in vivo. Because grafting of natural macromolecules with synthetic polymers generally slows down the biodegradation rate, both polysaccharides were modified in two different ways to form nanoprobes with or without poly(2-methyl-2-oxazoline)s chains. The prepared nanoconjugates were functionalized with N-hydroxysuccinimide-activated fluorescence and magnetic resonance imaging labels. The resulting materials were tested both in vitro and in vivo and were shown to be completely biocompatible, biodegradable and exhibit some extra benefits in terms of their practical usage in biomedicine. Glycogen was functionalized with allyl and propargyl groups with following freeze-drying from aqueous solutions to form nano- and microfibrous materials. The presence of both...

Non-covalent interactions including nucleobase hydrogen bonding and phosphonium/ammonium ionic aggregation were studied in block and random polymers synthesized using controlled radical polymerization techniques such as nitroxide mediated polymerization (NMP) and reversible addition-fragmentation chain transfer polymerization (RAFT). Non-covalent interactions were expected to increase the effective molecular weight of the polymeric precursors through intermolecular associations and to induce microphase separation. The influence of non-covalent association on the structure/property relationships of these materials were studied in terms of physical properties (tensile, DMA, rheology) as well as morphological studies (AFM, SAXS). Ionic interactions, which possess stronger interaction energies than hydrogen bonds (~150 kJ/mol) were studied in the context of phosphonium-containing acrylate triblock (ABA) copolymers and random copolymers. Phosphonium-containing ionic liquid monomers with different alkyl substituent lengths and counterions enabled an investigation of the effects of ionic aggregation of phosphonium cations on the polymer physical properties. The polymerization of styrenic phosphonium-containing ionic liquid monomers using a difunctional alkoxyamine initiator, DEPN2, afforded an ABA triblock copolymer with an n-butyl acrylate soft center block and symmetric phosphonium-containing external reinforcing blocks. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) of triblock copolymers revealed pronounced microphase separation at the nanoscale. Phosphonium aggregation governed block copolymer flow activation energies. In random copolymers, the phosphonium cations only weakly aggregated, which strongly depended on the length of alkyl substituents and the type of counterions. Acrylate random copolymers consisting of quaternary ammonium functionalities were synthesized using reversible addition-fragmentation chain transfer polymerization (RAFT). The obtained copolymers possessed controlled compositions and narrow molecular weight distributions with molecular weights ranging from Mn =50,000 to 170,000 g/mol. DMA evidenced the weak aggregation of ammonium cations in the solid state. Additionally, this ionomer was salt-responsive in NaCl aqueous solutions. Hydrogen bonding, a dynamic interaction with intermediate enthalpies (10-40 kJ/mol) was introduced through complementary heterocyclic DNA nucleobases such as adenine, thymine and uracil. Our investigations in this field have focused on the use of DNA nucleobase pair interactions to control polymer self-assembly and rheological behavior. Novel acrylic adenine- and thymine-containing monomers were synthesized from aza-Michael addition reaction. The long alkyl spacers between nucleobase and polymer backbone afforded structural flexibility in self-assembly process. Adenine-containing polyacrylates exhibited unique morphologies due to adenine-adenine π-π interactions. The complementary hydrogen bonding of adenine and thymine resulted in disruption of adenine-adenine π-π interactions, leading to lower plateau modulus and lower softening temperatures. Moreover, hydrogen bonding interactions enabled the compatibilization of complementary hydrogen bonding guest molecules such as uracil phosphonium chloride. / Ph. D.

Face à la diminution croissante des ressources d'origine fossile, une attention particulière est portée depuis plusieurs années envers l'utilisation de ressources renouvelables. Dans ce contexte, beaucoup de recherches sont orientées vers l'utilisation de polysaccharides tels que la cellulose. L'intérêt de ces composés est qu'ils sont abondants, peu chers et biodégradables. A l'inverse, ces polymères possèdent une faible résistance mécanique limitant ainsi leurs applications. De manière à moduler les propriétés de ces polymères, une alternative consiste à les modifier chimiquement par greffage de chaînes de polymères synthétiques. Néanmoins, les stratégies de greffage décrites dans la littérature présentent certaines limitations notamment sur la facilité de mise en oeuvre, la toxicité des méthodes employées, le nombre d'étapes de synthèses ou encore le contrôle des masses molaires. Par ailleurs, la caractérisation de ces architectures complexes reste délicate notamment pour prouver le greffage covalent des chaînes de polymère sur le polysaccharide. C'est précisément dans cet axe de recherche que s'insère ce sujet de thèse. Plus particulièrement, l'objectif principal consiste à mettre au point une méthode de greffage de l'acétate de cellulose robuste et facile à mettre en oeuvre, en vue d'une utilisation potentielle en tant que compatibilisant de mélange de polystyrène et d'acétate de cellulose. Afin d'atteindre cet objectif, notre stratégie a consisté à utiliser la polymérisation radicalaire contrôlée par les nitroxydes (NMP) où une attention particulière a été portée sur la caractérisation structurale des matériaux synthétisés (RMN du solide et DOSY, RPE, CES, DLS et DSC). / In order to respond to the fossil resources depletion, a particular attention was paid to the use of renewable resources since several years. In this context, many researches focus on the use of polysaccharides such as cellulose. These compounds are attractive because of their abundance, low cost and biodegradability. On the other hand, these polymers suffer from weak mechanical resistance limiting their practical applications. Grafting synthetic polymers chains on these natural polymers is an alternative to this problem. Nevertheless, grafting strategies described in the literature involve certain limitations such as the difficulty of implementation, the toxicity of the used methods, the great number of synthesis steps or the control of molar mass. Moreover, the characterization of these complex architectures remains delicate in order to prove the covalent grafting of chains on the polysaccharide. In line with this research context, the topic of this thesis concerns the development of a robust method for cellulose acetate polymer grafting. Moreover, the selected method has to be easy to implement, with a possible application as a compatibilizer for blending of polystyrene and cellulose acetate. In order to achieve this purpose, our strategy is based on the use of Nitroxide-Mediated Polymerization (NMP) where particular attention was paid to the structural characterization of synthesized materials (solid state NMR, DOSY NMR, ESR, SEC of grafts, DLS and DSC).

Dans le contexte d'un développement durable, les véhicules électriques apparaissent comme une solution incontournable dans le futur. Parmi les dernières évolutions sur les batteries, les systèmes constitués d'une électrode au lithium (technologie lithium métal) présente des performances remarquables en termes de densité d'énergie. L'inconvénient majeur de cette méthodologie est lié à la formation de dendrites lors de la recharge susceptibles d'occasionner des courts-circuits conduisant à l'explosion de la batterie. C'est dans cet axe que s'inscrit mon sujet de thèse dont l'objectif est de développer un électrolyte polymère solide présentant une conductivité ionique élevée (2.10-4 S.cm-1 à40°C) et une tenue mécanique suffisante (30 MPa) pour limiter les phénomènes de croissance dendritique. Pour cela, la polymérisation contrôlée par les nitroxydes (NMP) a été utilisée pour synthétiser des copolymères à blocs avec un bloc possédant des groupes d'oxyde d'éthylène –CH2-CH2-O- permettant la conduction des ions lithium et un bloc de polystyrène assurant la tenue mécanique de l'électrolyte final. Le bloc assurant la conduction ionique des architectures ainsi synthétisées sont constituées soit de POE sous forme linéaire soit de POE sous forme de peigne. / In the context of sustainable development, electric vehicles appear to be a major solution for the future. Among the lastest technologies, the Lithium Metal Polymer battery has presented very interesting performances in terms of energy density. The main drawback of this system is the formation of lithium dendrites during the refill of the battery that could cause short circuits leading to the explosion of the battery. The aim of my PhD is to develop a Solid Polymer Electrolyte showing a high ionic conductivity (2.10-4 S.cm-1 at 40°C) and a high mechanical strength (30 MPa) to prevent dendritic growth. For that purpose, Nitroxide Mediated Polymerization is used to synthesize block copolymers with a PEO moiety for ionic conduction –CH2-CH2-O- and polystyrene for mechanical strength. Different kind of architectures have been synthesized : block copolymer with linear PEO moiety or with grafted PEO moiety.

L’incorporation de particules inorganiques dans une matrice polymère confère de nouvelles propriétés au matériau ou améliore de manière significative les propriétés déjà existantes. Cependant, l’apparence visuelle perçue, telle que la transparence, peut être altérée par des phénomènes de diffusion de la lumière par les particules. Cette diffusion de la lumière est principalement conditionnée par la dimension des particules –ou agrégats de particules- et la différence d’indice de réfraction entre la matrice et les charges. Afin de traiter ces deux problèmes, l’objectif de nos travaux était de contrôler simultanément l’état de dispersion des nanoparticules inorganiques dans la matrice polymère et l’indice de réfraction des nanoparticules de façon à l’ajuster à celui de la matrice. Pour élaborer ce nouveau composite, nous avons synthétisé des nanoparticules hybrides cœur@écorce avec un cœur inorganique qui apporte les nouvelles propriétés et une écorce polymère d’épaisseur contrôlée, obtenue par polymérisation radicalaire contrôlée par voie nitroxyde amorcée à la surface des nanoparticules inorganiques. L’écorce polymère limite l’agrégation des particules et permet de modifier l’indice de réfraction moyen des nanoparticules cœur@écorce. En contrôlant l’épaisseur et la nature chimique de l’écorce polymère, nous cherchons à ajuster l’indice de réfraction des nanoparticules cœur@écorce à celui de la matrice. Les nanoparticules ont ensuite été dispersées dans une matrice de poly(méthacrylate de méthyle). Les propriétés optiques des composites ont été caractérisées par spectrogoniophotométrie, afin d’obtenir des informations sur l’intensité et la distribution angulaire de la lumière transmise par le composite. La transparence des nanocomposites a été fortement améliorée en ajustant l’indice de réfraction des nanoparticules cœur@écorce à celui de la matrice. / The incorporation of inorganic particles into a polymer matrix confers new properties to the material or enhances significantly existing properties. However, the perceived visual appearance, such as loss of transparency, might be modified by the scattering of light by the particles. This light scattering is mainly due to the particle –or aggregates of particles- dimensions and the refractive index difference between matrix and fillers. In order to address both issues, the objective of the present work was to control simultaneously the dispersion state of the inorganic nanoparticles into the polymeric matrix and the refractive index of the nanoparticles to match the one of the matrix. To achieve this new composite, we designed hybrid core@shell nanoparticles with an inorganic core that brings new properties and a polymer shell of controlled thickness, obtained by surface-initiated nitroxide mediated controlled radical polymerization. The polymer shell limits the aggregation of the particles and enables us to tune the average refractive index of the hybrid core@shell particle. By controlling the thickness and the chemical nature of the polymeric shell, we targeted to match the refractive index of the hybrid core@shell particle to the one of the polymeric matrix. The nanoparticles were further dispersed into a poly(methyl methacrylate) matrix. Optical properties of composites were characterized by spectrogoniophotometry which gave us informations about the intensity and the angular distribution of the transmitted light by the nanocomposites. The transparency of the nanocomposites was strongly enhanced for core@shell particles fulfilling the refractive index matching conditions.

A number of novel isoindoline nitroxides have been synthesised using a variety of synthetic techniques. Several carbon-carbon bond forming methodologies, including the first examples of Heck and Sonogashira coupling applied to the isoindoline nitroxide class, were utilised to give novel robust aromatic frameworks. Palladium-catalysed Heck coupling of brominated nitroxides and ester-substituted olefins generates novel nitroxides possessing extended conjugation. Hydrolysis of the nitroxide esters gave the corresponding carboxylic acids, which showed enhanced water solubility. Sonogashira coupling of an iodo-isoindoline nitroxide gave several novel alkynesubstituted nitroxides in high yield. Subsequent coupling of a deprotected ethynyl nitroxide with aromatic iodides gave acetylene-linked nitroxides and an acetylene linked nitroxide dimer. A butadiyne linked dinitroxide was successfully synthesised via Eglinton oxidative coupling of two ethynyl nitroxides. The synthesis of a novel water-soluble dicarboxy nitroxide was achieved by base hydrolysis of a dinitrile. Functional group interconversion furnished anhydride and imide substituted nitroxides from the diacid. Subjecting the imide to the Hofmann rearrangement gave an unexpected brominated amino-carboxy nitroxide. The dicarboxy nitroxide and the brominated amino-carboxy nitroxide were both shown to have a protective effect on Ataxia-Telangiectasia cells, indicating a possible role as antioxidants in the treatment of this disease. A fluorescein nitroxide was successfully synthesised through the condensation of the anhydride substituted nitroxide and resorcinol. After limited success using a variety of other techniques, Buchwald-Hartwig amination was able to furnish a rhodamine nitroxide, via a triflate-fluorescein nitroxide. The extended aromatic nitroxides possess suppressed fluorescence and we have described these systems as profluorescent. The profluorescent nitroxides were found to have significantly lower quantum yields than the non-radical analogues and displayed a substantial increase in fluorescence intensity upon radical trapping, making them useful probes for free radical reactions.

Le but de ce projet a été d'améliorer un procédé de clarification développé par VEOLIA Environnement : l'Actiflo®. L'Actfilo® est basé sur l'ajout de microsable lors de l'étape de floculation afin d'augmenter les vitesses de décantation. Toutefois, une importante quantité de polymère est continuellement ajoutée au procédé, et des résiduels de ce dernier peuvent être rencontrés dans les eaux décantées. Notre travail a été de fonctionnaliser (i.e. greffer) le microsable avec un polymère floculant afin de pouvoir recycler en continu le matériau hybride par hydrocyclonage. La fonctionnalisation par « Grafting Onto » a consisté à greffer un polymère floculant commercial sur le microsable alors que la fonctionnalisation par « Grafting From » a consisté à faire croître un polymère floculant depuis la surface. Les capacités floculantes des microsables ont été testées en essais classiques de coagulation/floculation. Les microsables fonctionnalisés avec un polymère cationique par « Grafting From » ont démontré leur supériorité en conduisant à un abattement en Carbone Organique Dissous (COD) de 25% contre un abattement de 15 % pour le procédé classique ou pour les microsables fonctionnalisés par « Grafting Onto ». Une turbidité légèrement supérieure est toutefois toujours obtenue avec les sables fonctionnalisés par rapport à l'ajout de polymère libre (+ 0,5 NTU). Enfin, des procédés de régénération permettant de réutiliser les microsables ayant servi en coagulation/floculation ont été mis en place, le plus efficace d'entre eux étant un traitement à base d'Acide Oxalique. Ce traitement a permis de régénérer les propriétés floculantes du sable sur deux cycles. / The purpose of this project was to improve a clarification process developed by VEOLIA Environment: The Actiflo®. The Actfilo® is based on adding microsand in the flocculation stage in order to increase the speed of sedimentation. However, a significant amount of polymeric flocculant is continuously added to the process, and residuals can be found in the decanted water. Our work was to graft a polymeric flocculant onto microsand in order to recycle the full hybrid material through hydrocycloning. Functionalization by "Grafting Onto" was based on grafting a commercial polymer onto microsand whereas “Grafting From” was based on surface-initiated polymerization. Flocculation properties of functionalized microsands were then tested in conventional coagulation/flocculation tests where the effectiveness of the two grafting methods was compared. Cationic functionalized sands, obtained by “Grafting From”, exhibit the best properties as a decrease of Dissolved Organic Carbon of 25% was reached whereas a decrease of 15% was reached by adding free polymer or adding sands from the “Grafting Onto” method. However final turbidity value was always slightly lower for the flocculation that occured when free polymer was added (- 0,5 NTU). Finally, regeneration processes to recycle the functionalized sands were established. The most effective of them being a treatment with Oxalic Acid. This treatment allowed us to regenerate flocculating properties of functionalized sands twice.

Des polymères à base de méthacrylate de poly(oxyde d'éthylène) (PEOMA) avec des chaînes pendantes PEO (Mn = 300 ou 950 g mol-1) ou des copolymères de PEOMA300 et d'acide méthacrylique (AMA) ont été synthétisés par polymérisation radicalaire contrôlée par les nitroxydes en utilisant une alkoxyamine (BlocBuilder®) comme amorceur en présence de SG1 et d'une faible quantité de styrène. Les copolymères à base de PEOMA300 et d'AMA sont thermo- et pH-sensibles. Les deux types de macroalkoxyamines ont été utilisés pour amorcer la copolymérisation en émulsion du méthacrylate de n-butyle et du styrène et former, par auto-assemblage induit par la polymérisation, des particules composées de copolymères à blocs amphiphiles, en absence ou présence de particules de silice. En absence de silice, des particules stabilisées de façon stérique ou électrostérique ont été formées. La polymérisation présente les caractéristiques d'une polymérisation contrôlée avec néanmoins la formation d'une faible proportion de chaînes mortes. L'effet du pH, de la force ionique et de la nature ou de la concentration des macroalkoxyamines sur la cinétique de polymérisation et la morphologie des particules a été étudié, et des sphères, des vésicules ou des nanofibres ont été obtenues. Les macroalkoxyamines à base de PEO s'adsorbent sur la silice via la formation de liaisons hydrogène entre les chaînes PEO et les groupes silanol. La synthèse de copolymères à blocs en surface de la silice a conduit à la formation de particules hybrides de différentes morphologies (bonhomme de neige, multipodes, framboise, coeur-écorce, têtard, mille pattes) liées à la taille de la silice, au pH et à la nature du macroamorceur / Water-soluble brush-type polymers composed of poly(ethylene)oxide methacrylate (PEOMA) units with PEO side groups of various chain lengths (Mn = 300 and 950 g mol-1) or of PEOMA300 with methacrylic acid (MAA) were synthesized by nitroxide-mediated polymerization using an alkoxyamine initiator (BlocBuilder®) and SG1 nitroxide in the presence of a low amount of styrene. The PEOMA300-MAA based copolymers showed a dual temperature/pH response. The two series of macroalkoxyamines were used in aqueous emulsion copolymerization of nbutyl methacrylate and styrene leading to the formation of particles composed of amphiphilic block copolymers through polymerization-induced self-assembly, in both the absence and presence of silica. The experiments performed in the absence of silica particles resulted in the formation of sterically or electrosterically stabilized latexes. The polymerization exhibited all the features of a controlled system with however the presence of a small proportion of dead chains. The effect of pH value, ionic strength and type and concentration of the macroalkoxyamine initiator on polymerization kinetics and latex morphologies was investigated. Depending on the reaction conditions, spherical particles, vesicles or nanofibers were successfully prepared. The PEO-based macroalkoxyamines were shown to adsorb on the silica surface via hydrogen bond interaction between PEO and the silanol groups. This enabled block copolymers to be generated in situ on the silica surface leading to hybrid particles with snowman, raspberry, daisy, core-shell, “tadpole-” and “centipede-” like morphologies depending on the silica particle size, pH value and type of macroinitiator

Ce travail fait l’objet d’une avancée scientifique dans le développement de la technique d’IRM rehaussée par l’effet Overhauser dans la souris à 0,2 T. Cette dernière repose sur le transfert de polarisation des spins électroniques saturés d’un radical libre vers les spins des protons (généralement de l’eau) voisins pour rehausser le signal RMN du proton. Notre équipe a développé cette technique pour détecter une activité protéolytique au travers de deux stratégies. La première partie de la thèse a été de détecter pour la première fois une activité protéolytique in situ dans des souris saines et in vitro sur cellules vivantes. L’efficacité du rehaussement par effet Overhauser repose sur le temps de corrélation des spins des électrons non-appariés. Un radical nitroxyde greffé à l’élastine a été utilisé comme substrat. La protéolyse de ce dernier par des élastases pancréatiques a conduit l’observation en 3D d’un rehaussement du signal RMN de plus de 10 fois dans le tube digestif de souris vivantes. De plus, des développements méthodologiques, tels que l’implémentation de la séquence TrueFISP, le sous-échantillonnage par la méthode “Keyhole”, et la reconstruction des données en 3D ont été faits. La deuxième stratégie repose sur des molécules de nitroxyde ayant l’unique propriété de pouvoir décaler leurs pics de résonance après hydrolyse. Un nitroxyde phosphorylé en position Béta pouvant être détecté à deux fréquences spécifiques différentes avant et après hydrolyse d’un groupement chimique a été synthétisé par des chimistes à Marseille. L’hydrolyse de cette macromolécule a été observée in vivo dans l’estomac de souris saines avec des rehaussements de plus de 400% et imagée en 3D avec une bonne résolution spatio-temporelle. Ainsi, une prochaine étape serait de poursuivre ce travail sur un modèle pathologique et développer cette technique à un champ magnétique plus bas. / This work relates the continuity and advances in the implementation of the Overhauser-enhanced Magnetic Resonance Imaging technique on a 0.2 T scanner. Briefly, OMRI technique is based on polarization transfer of saturated electronic spins from free nitroxide radicals to proton spins of surrounding water molecules in the aim to drastically enhance proton NMR signal. To this technique, our research team has merged specific strategies for proteolytic activity detection. The first strategy relies on a 3D visualization of proteolytic activity happening in intact living cells or in vivo in healthy mice. With an Overhauser switch based upon changes in molecular tumbling time, high Overhauser enhancements of 10-fold were observed in the intestinal tract of mice after that elastolytic activity of our probe: the nitroxide-labeled elastin macromolecule took place. In addition, MRI developments - TrueFISP sequence implementation, undersampling Keyhole method and data reconstruction were carried out for imaging these rapid biological processes. A second exquisite strategy is also described using nitroxides with shifting resonant peaks. Here, a Beta-phosphorylated nitroxide molecule was specifically detected at two distinct frequencies: one for its substrate and the other for its product once hydrolysis took place. This hydrolysis was imaged in 3D in the stomach of living mice with Overhauser enhancements of more than 400% and with a good spatiotemporal resolution. The perspectives of this work lie on a future detection of a pathological proteolytic activity in vivo and eventually and development of very low magnetic field OMRI.