This thesis presents a design technology of forming a shaped lid focused on cutting, bending, drawing, as well as trimming and making the required holes. There is described several basic variants of sheet metal forming based on the literature. Production of holes of specified cover, for an annual production of 100 pieces of shaped lid, is solved by unconventional technologies. From subsequent economic evaluation of selected technologies is chosen an appropriate technology to minimize production costs.

This Master's thesis deals with the issue of high-speed turning of the 100Cr6 material. The aim is to identify and experimentally validate an innovative production process for a particular component. The thesis includes theoretical basis of high-speed machining, analysis of the current state of the manufacturing process, innovation design and experimental verification. At the end of the thesis, parameters of the machined surfaces of specimens are evaluated.

The first part of the diploma thesis deals with modern glued lamellar prisms for the production of windows, doors and their combination. The procedure of the euro balks production is the essential part of the work. Furthermore, the thesis focuses on the characterization of the wood modification, above all thermally modified wood which is currently used in practice. Moreover, at the present new modified material known as the wood treated by acetylation (Accoya). The practical part deals with the assessment of the bonded lamellar prisms' quality and rigidity. Next examination is devoted to two types of glue (PVAC, PUR).The prisms with two directions of the fibres in the middle layer were tested. The timber from the tangential and semi-radial direction was used for the middle layers. The conclusion if the produced prisms meet the requirements and satisfy the quality class for the window and door production, is included in the discussion.

The subject of my thesis is Design and optimisation of log rounding process. The aim of the work is to develop and explain the changes of the cutting tool parameters of a machine for logs rounding; experimental substantiation for the change of the cutter angle related to the axis of the workpiece. This paper deals with all kinds of wooden housing, from houses of solid wood to houses made of wood-based materials. The description of positive and negative characteristics of each type, including why a house made of logs is essentially different, its positive and negative sides. The paper examines all kinds of the logs rounding technology; the characteristics of their quality and energy consumption are presented. The experimental part of the work consists in the experiment planning and identifying of the factors that influence the rounding process. The way the cutter angle influences the surface roughness during the cylindering process was studied. The final stage of the work was to evaluate the results of the work, their relevance and the possibility to introduce the new equipment with the changed parameters of the cutting tool into production.

This diploma thesis addresses the issues associated with the theory of chip machining of metals. The theories are supported in many chapters by illustrative images created in the SolidWorks 3D modeler. The introductory part is rather theoretical, describing integrally and systematically the basic terms of splinter machining. The subsequent chapters address the issues of the turning tool edge geometry, different types of tools? materials, chip development, forces, work, temperatures and heat emitted during the work. Furthermore, the diploma thesis also addressed issues related to the machining efficiency. Finally, the conclusion of the thesis consists of a description of the basic types of milling and turn machining

This thesis deals with the proposal of production technologies for a band saw clamp plate. Introduction of thesis is focused on problematics about selected component. In the next section, there are described technologies, which were used in the thesis. Practical part is about proposals of conventional and unconventional production methods. Methods are evaluated in the conclusion of thesis.

This diploma thesis deals with machining of rotating components made of composite material. Components of the two manufacturing technologies are compared. The aim of the thesis was to analyze and calculate the costs of the given technologies for different production batches. At the end of the diploma thesis there is a technological-economic evaluation and decision on which production technology will be used.

The subject of this thesis is the design of production technology of the hydraulic cylinder – the part of servomotor of a steam turbine control valve. The main precondition is a perspective technology of manufacturing the component on a single workplace using Siemens NX10 CAM system. The implementation of this work was carried out in cooperation with the Siemen, s.r.o., the branch of Industrial Turbomachinery in Brno. Part of the thesis is a brief introduction to the issue of steam turbines. The main part is devoted to analysis of a selected component in terms of technology, design of the best strategy of production technology and its implementation. The conclusion deals with the technical and economic assessment of the proposal.

The topic of this thesis is the choice of optimal production technology for the chosen representative. The aim of this work is to compare production on conventional machine and on NC and CNC machines. Both variants are evaluated in terms of efficiency, speed and economy of production. Outputs are based on recommended production procedures based on the number of pieces produced in the order.

This master thesis focuses on analysing the origins of residual stress in material caused by face milling. Representatives of three groups of aluminum alloys (5000, 6000, 7000) are compared by measurements. For measuring of the residual stress in aluminum alloys, the hole-drilling method was used by applying tensometric rosettes. In order to determine the influence of the used milling cutters', flatness of the machined surface was analyzed by comparative method. The thesis concludes with a discussion and an overall evaluation of the results.