This master's thesis deals with the process of machining a forged connecting rod in cooperation with the company Zetor Tractors a.s. The first chapter of the thesis is focused on a detailed introduction of the company. The second chapter includes an elaborate analysis of the technical documentation and requirements concerning the making process of the subject of study, specifically the construction of the connecting rod. In the third chapter, the current production technology is discussed and described in detail. The aim of the fourth chapter is to propose an innovative technology which can be used for the production of connecting rods in the required quality. The fifth chapter is aimed at testing the newly designed technology. In the final, sixth, chapter, a technical and economical evaluation of the proposed procedure is performed.

The meaning of the diploma thesis is to create a new mold plunger for injection mold using a suitable method according to the original mold plunger. The final mold part should meet the required surface parameters. The work is focused on the analysis of the original mold plunger and the experimental verification of suitable methods of production of the equivalent mold plunger.

The assigned thesis is focused on the proposal of rationalization solutions to the component Bonnet, which is a standard representative of the most important sections of broader spectrum of customer´s components. The introduction part describes the component basis, according to which the standard representative was chosen, later on characterised from the point of view of seriality. The following large part of classfying the time comsumption in machinery is essential for the calculations as such, which are the essential part of this dissertation. The proposal of production rationalization is concerned with the exclusion of unnecessary losses and using existing ressources with the help of a higher level of machinery, technology, work organisation, production and management, which lead to a higher labour productivity. The technological production preparation ensures the documentation processing, the proposal of semi-finished product, machines, fastening, measuring and calculation of necessary technological specifications for ensuring the production. In the final part, there is to be found the technical and economical evaluation of rationalization proposals, which numerically evaluates the analysed outputs of this thesis.

Diplomová práce se zabývá analýzou produktivity a efektivity řezného procesu frézování. Pro zjištění kritické hloubky třísky byla analyzována reálná frézka. Model frézky byl vytvořen v programu Autodesk Inventor. Analýza řezného procesu probíhala v programu Ansys Workbench. Výsledky byly použity pro sestavení stabilitních diagramů. Po vyhodnocení výsledků byly navrženy dva přístupy pro zefektivnění procesu frézování. Vliv těchto změn na produktivitu řezného procesu byl ověřen porovnáním výsledků s předchozí analýzou.

The master thesis deals mainly with the optimization of machining of ceramic semi-finished products from ZrO2 and Al2O3. The first part with literary research, which describes the steps of the technology of forming ceramic bodies, especially the gelcasting method. The thesis describes possibilities of milling of ceramic materials using CNC technology. The thesis describes the dependence of acquired roughness on bodies and used machining strategies. The best roughness parameters on ZrO2 samples were obtained after they were calcined at 900 ° C, while the lowest roughness was obtained on the samples in the unprotected state for the Al2O3 samples. Samples machined with a spherical milling cutter showed surface roughness Ra = 1 m for ZrO2 and Ra = 1.3 m for Al2O3. It also describes the possibility of machining sharp-edged shapes and fine details where the best results are achieved on ZrO2 samples engraved at 900 and 1100 °C. Tool wear was particularly important when machining samples of Al2O3 ignited at temperatures above 800 °C.

Diploma thesis deals with renovation of tractor Zetor 6911 with hand tool machining use. Theoretical part aims at historical evolution of machining and describes the hand tool machining methods. Renovation options include repair by a renovation company, yourself renovation and yourself renovation with cooperation in external company. Due to great renovation experience and technical knowledge is tractor chosen to be renovated by yourself. Complete machine renovation is very complex thus there are shown only specified examples of machine parts renovation. In the thesis there are in detail described renovation processes, including tools and hand devices. Final part includes results evaluation and costs comparation of renovation options.

The main topic of this Master thesis is proposal of the streamline the production of the machined part of a handguard. The aim of the work is to evaluate the current machining process, to design possible innovation, to select the best way of construction of a design part. The conclusion will be devoted technical and economic evaluation in terms of time, cost and material consumption.

This master's thesis is focused on the modeling and tracks of thin-walled components. Used softwares are CATIA V5R20 from Dassault Systemes for Experimental Component Modeling and PowerMILL 2018 from Autodesk for Draw and NC Programming. The production efficiency between the precision casting and the workpiece of the cube blank based on the material utilization factor and machining time is compared in this work.

The diploma thesis convey the information about the creation of technological procedures leading to the optimal way of repairing damaged parts of the fixture and creating production procedures for the production of new parts of the assembly. The theoretical part is focused on the analysis of the issue, determination of material of damaged parts for future production and designed semi-finished product. Furthermore, the technology of production from the point of view of used technologies is discussed. This includes a description of the tool materials. The practical part of the thesis is focused on the design of technological procedures for repairing damaged parts, which must be repaired as soon as possible. For the future production of new parts, the second half of the practical part includes the manufacturing processes including their description. There are evaluated variants of repair and production of new parts at the end of the thesis.

This semestral work deals with the design and realization of multipurpose milling machine for production of prototype small components made from soft materials and PCBs. Thesis contains design of mechanical construction, individual parts of driving machine and graphic user interface.