[pt] Este trabalho tem por objetivo um estudo da viabilidade de se fazer varreduras com uma antena gregoriana off-set com deslocamentos apenas do alimentador. São localizadas as regiões focais para a antena receptora de modo a posicionar o alimentador de uma maneira simples. Também são apresentados os diagramas de radiação correspondentes a estes deslocamentos calculados segundo a Teoria Escalar da Difração; e as limitações de varreduras para a antena particular que serviu para testar a eficiência do método. / [en] This work is related to the study of the pattern of Gregorian off-set antennas, by displacement of the feeder. The position of the feeder is obtained, in a simple way, by determining the focal regions of the antennas, working in reception. The radiation patterns corresponding to different position of the feeder are also presented. Such patterns are calculated according to the scalar theory of diffraction. The useful range of scanning, for a given antenna, used to check the efficiency of the method, is determined.

The nation's Section 404 permitting program, of the Clean Water Act (CWA), represents one of the longest regulatory histories of designing and implementing credit trading programs to satisfy regulatory requirements. The role and the function of in-lieu fee (ILF) programs in supporting this regulatory structure have undergone a substantial change. For the first time in the history of the Sec. 404 program, 33 CFR Part 332 and 40 CFR Part 230, Subpart J (the "2008 mitigation rule" or "rule"), prioritizes the use of off-site mitigation over on-site-mitigation. Additionally, the rule prioritizes advanced, third-party mitigation; especially as achieved through mitigation banks; over any off-site compensatory mitigation provided by ILF programs (33 CFR 332.3(b)(1)). This new regulatory environment favors the use of commercial mitigation bank credits while acknowledging that the limited permittee demand of off-site mitigation credits, in particular areas, justifies the continuing need for ILF programs (Corps and EPA 2008, p.19606,19611). This research examines how regulatory officials use ILF programs under the 2008 mitigation rule, and, it determines the extent to which ILF programs are capable of fulfilling the role envisioned for them under the 2008 mitigation rule. Simulation results indicate that commercial mitigation banks cannot meet risk adjusted returns under limited credit demand conditions. ILF programs offer some additional financial capacity to fill the void in commercial bank coverage; but, this potential is limited in low demand conditions. Furthermore, empirical case studies of a Virginia and Georgia provide evidence that regulatory officials rely on ILF programs to provide off-site compensatory mitigation almost exclusively in the absence of private credit supply, as intended in the 2008 rule. Evidence in Georgia and Virginia also indicate that, in some situations, ILF programs face difficulties in providing mitigation under the constraints of limited demand and more stringent regulatory requirements. / Master of Science

OFFSET ON BUSINESS TRANSACTIONS Topic of this thesis is set-off in commercial relations. It is structured in three main chapters which deal with the most relevant issues and problems related to set-off in commercial relations. Not only it analyzes the current state of law and case law but tries to interpret Act No 89/2012 Coll., New Civil Code. First part of the thesis aims at the preconditions for set-off. Firstly, the possibility of set-off of foreign currency claims in New Civil Code is discussed. It also reflects upon the long standing discussion of set-off of due rights against rights which are not due. Then it proceeds to new precondition for set-off - certainty of rights. Author of this thesis argues that such precondition refers to reasonable doubts as to the existence and value of the right. Second part of the thesis deals with set-off of two or more rights and obligations. Author analyzes problematic aspects of current case law which en bloc excludes such possibility with the result that notice of set-off has to be overly specific. Controversy of the current case law, moreover, lies in the fact that it contradicts the previous case law which (in the author's view correctly) do not excessively distinguish between set-off and performance of the obligations. Admittedly, some author's...

Effektiviteten av automatiserade reningsprocesser inom avloppsreningsverk beror ytterst på kvaliteten av de mätdata som fås från installerade instrument. Givarfel påverkar verkens styrning och är ofta anledningen till att olika reglerstrategier fallerar. Idag saknas standardiserade riktlinjer för hur instrumenteringsarbetet på svenska reningsverk bör organiseras vilket ger begränsade förutsättningar för reningsverken att resurseffektivt nå sina utsläppskrav. Mycket forskning har gjorts på att optimera olika reglerstrategier men instrumentens roll i verkens effektivitet har inte givits samma uppmärksamhet. Syftet med detta examensarbete har varit att undersöka hur instrumentering på reningsverk kan organiseras och struktureras för att säkerställa mätdata av god kvalitet och att undersöka effekter av givarfel på reningsprocessen. Inom arbetet genomfördes en litteraturstudie där instrumentering på reningsverk under-söktes. Effekter av givarfel på reningsprocessen undersöktes genom att simulera en fördenitrifikationsprocess i Benchmark Simulation Model no. 2 där bias och drift implementerades i olika givare. Simuleringar visade att positiva bias (0,10–0,50 mg/l) i en ammoniumgivare inom en kaskadreglering bidrar till att öka luftförbrukningen med cirka 4–25 %. Vidare resulterade alla typer av fel i DO-givare i den sista aeroba bassängen i en markant större påverkan på reningsprocessen än samma fel i DO-givare i någon av de tidigare aeroba bassängerna. Om den sista aeroba bassängen är designad för att hålla lägre syrehalter är DO-givaren i den bassängen den viktigaste DO-givaren att underhålla. Positiva bias (200–1 000 mg/l) i TSS-givare som används för att styra uttaget av överskottsslam bidrog till kraftiga ökningar av mängden ammonium med cirka 29–464 % i utgående vatten. Negativ drift i DO-givare visade att stora besparingar i luftningsenergi, cirka 4 %, var möjliga genom ett mer frekvent underhåll av DO-givarna. Huruvida ett instrument lider av ett positivt eller negativt givarfel, bias eller drift, kommer att påverka hur mycket och i vilken mån reningsprocessen påverkas. Studien av givarfel visade att effekten av ett positivt eller ett negativt fel varierade och att effekten på reningsprocessen inte var linjär. Effekten av givarfel på reningsprocessen kommer i slutändan att bero på den implementerade reglerstrategin, inställningar i regulatorerna och på den styrda processen. / The effectiveness of automated treatment processes within wastewater treatment plants ultimately depend on the quality of the measurement data that is given from the installed sensors. Sensor faults affect the control of the treatment plants and are often the reason different control strategies fail. Today there is a lack of standardized guidelines for how to organize and work with online sensors at Swedish wastewater treatment plants which limits the opportunities for treatment plants to reach their effluent criteria in a resource efficient manner. Much research has been done on ways to optimize control strategies but the role of sensors in the efficiency of the treatment plants has not been given the same level of attention. The purpose of this thesis has been to examine how instrumentation at wastewater treatment plants can be organized and structured to ensure good quality measurement data and to examine how sensor faults affect the treatment process. Within the thesis a literature study was conducted where instrumentation at wastewater treatment plants was examined. The effects of sensor faults were examined by simulating a pre-denitrification process in Benchmark Simulation Model no. 2 where off-sets (biases) and drift where added to measurements from different implemented sensors. The simulations showed that positive off-sets (0.10–0.50 mg/l) in an ammonium sensor within a cascaded feedback-loop adds to the energy consumption used for aeration by roughly 4-25%. It could further be shown that all types of faults in a DO sensor in the last aerated basin had significantly larger effect on the treatment process than the same fault in any of the other DO sensors in the preceding basins. If the last aerated basin is designed to have low DO concentrations the DO sensor in that basin is the most important DO sensor to maintain. Positive off-sets (200–1 000 mg TSS/l) in suspended solids sensors used for control of waste activated sludge flow contributed to large increases of ammonia, by 29-464%, in effluent waters. Negative drift in DO sensors showed that significant savings in aeration energy, roughly 4%, was possible to achieve with more frequent maintenance. Whether a sensor is affected by a positive or a negative fault, be it off-set or drift, will affect how much and in what way the treatment process will be affected. The study of sensor faults showed that the effect of a positive or a negative fault varied and that the effect on the treatment process was not linear. The effect of a sensor fault on the treatment process will ultimately depend on the implemented control strategy, settings in the controllers and on the controlled process.