There has been much effort in new design for transceiver used in mobile communications. The general approach is to combine RF functions with DSP to allow linear modulation techniques and permit flexibility of modulation format and receiver processing. In practice, with the quadrature modulation technique there is always some imbalance between the I- and Q channels of modulator and demodulator. This is mainly due to finite tolerances of capacitor and resistor values used to implement the analog components. The unavoidable imbalance between the I- and Q channels is known to degrade the performance of quadrature communication system. The main concern of this thesis is to propose a new blind scheme and with fast convergence algorithm, such as the inverse QRD-RLS algorithm, to deal with the problem described above for compensation in the transmitter and receiver. First, for the transmitter, the so-called adaptive estimation and compensation with power measurement implemented by the inverse QRD-RLS algorithm is employed. While in the receiver, a new blind adaptive filtering approach of the nonlinear parameters estimation and compensation, along with the power measurement in the receiver, is devised to adaptively compensate for the gain/phase imbalance and DC offsets in a quadrature demodulator. Where the conventional inverse QRD-RLS algorithm is employed for estimating the parameters of compensator, without using any reference signal transmitted from the transmitter. To document the merits of the proposed scheme, computer simulation for the coherent 16-PSK-communication system is carried out. With our proposed method a great improvement for eliminating the effects of the imbalance and offset over the existing techniques has verified. It has rapidly convergence rate and the smaller mean square error in steady state.

In this thesis, One of the difficulties in the orthogonal frequency division multiple access (OFDMA) systems is the multi-user interference (MUI) induced by the carrier frequency offset (CFO). In sub-band OFDMA systems, each user occupies a consecutive and non-overlapping frequency sub-band. The pilots are usually placed at the edges of a sub-band for frequency synchronization and channel estimation. However, the both frequency synchronization and channel estimation performance are influenced seriously by the multi-user interference (MUI) induced by CFO of other users. The MUI can be reduced by inserting the guard sub-carrier between adjacent users. In this paper, a novel pilot architecture is investigated, which has the same bandwidth efficiency as the conventional guard sub-carrier insertion scheme. In addition, the proposed pilot architecture provides better carrier frequency synchronization and channel estimation performance than conventional pilot assignment. Moreover, this new pilot architecture also has MUI reduction utility.

L'électronique imprimée prend place à l'interface entre les secteurs des industries graphiques et celui de la microélectronique. Les techniques d'impression industrielles classiques que sont l'héliogravure, la flexographie et l'offset présentent le grand avantage d'une productivité élevée en terme de surface imprimée. Une étape de recherche sur la formulation d'encres spécifiques pigmentaires ou à base de polymères fonctionnels se place au cœur de cette problématique. Ce travail de thèse s'inscrit dans le contexte de l'électronique imprimée avec l'optimisation des différents paramètres de transfert intervenant dans l'impression. De même, l'étude de la rhéologie et la physico-chimie des encres est une étape capitale et indissociable de la caractérisation des états de surface des supports. En effet si chaque procédé d'impression possède ses spécificités en termes de propriétés des encres utilisées, une bonne adéquation encre/support est nécessaire afin d'obtenir une impression ayant les caractéristiques recherchées. <br />Nous avons donc formulé différentes encres polymères conductrices en particulier à base de poly thiophène. Une étude des propriétés de surface et des caractéristiques physiques des différents papiers et plastiques a permis de choisir deux supports tests pour nos impressions. Enfin, une optimisation des paramètres d'impression a démontré l'influence des conditions d'impression sur les caractéristiques des dépôts effectués en particulier en terme de conduction électrique. Un état de l'art et une bibliographie font le point sur les avancées de l'électronique imprimée, ses applications et ses enjeux.

A simple methodology for determining the input referred offset voltage of comparators is presented. This in general is difficult as the output of a comparator is discrete valued. The method relies on a Monte-Carlo-Simulation with certain comparator input values and some postprocessing of the comparator output data. The comparator is always operated in its intended environment, there is no modification of the comparator itself nor some unusual stimuli required. There is also no known restriction for the type of comparators to be analyzed.

Tez (Yüksek Lisans) - Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Jeofizik Mühendisliği Anabilim Dalı, 2008. / Kaynakça var.

Thesis (M.S.)--Naval Postgraduate School, 2003. / Title from title screen (viewed July 9, 2004). "December 2003." "ADA420510"--URL. Includes bibliographical references (p. 111-120). Also issued in paper format.

In order to sell products in the defense industry it is often demanded of the seller to reinvest capital and collaborate with companies in the buying country, with the buyer hoping to establish a defense industry of their own. These so called offset demands are seen as an industry standard and forces the sellers to open up their supply chain and educate and develop the industry in the buying country. This “forced” knowledge transfer is an interesting topic and have been the focus point of this thesis. How can firms conduct successful knowledge transfer and develop the foreign industry and at the same time protects its own products and competitive advantage? This qualitative study has been done through interviews with four people having senior positions and a vast knowledge and background in working with offsets, combined with secondary data from previous studies and articles. The study showed that the most important factor for a successful knowledge transfer is the absorptive capacity of the partner and buying country. Furthermore, the success also lies in the offset regulations of the buyer, if you ask for the wrong things or in the wrong way, the industrial effects will be very limited. The Swedish firms were not afraid of sharing their knowledge since they had the confidence that they would keep to stay ahead of any new upcoming competitor, therefore a minor factor to consider. Lastly offsets have often been portrayed negatively. However, if successfully conducted, several positive effects of offsets have been identified by the authors. Showing that even though partnerships may an “arranged marriage” it can still become successful.

I conducted an amplitude vs. offset (AVO) analysis on newly acquired 3D seismic reflection data to detect elevated pore fluid content and pore fluid pressure along the Costa Rica convergent margin to address dewatering processes of subduction zone sediments. These data provide the highest quality 3D seismic data acquired to date along a convergent margin for detailed analysis of geophysical properties along the plate boundary fault interface. In 2011, a 55 km by 11 km 3D seismic reflection survey was completed using the R/V Marcus G. Langseth offshore western Costa Rica at the convergent margin of the Cocos and Caribbean plates. We applied pre-stack Kirchhoff time migration to a subset of these data across the frontal prism where amplitude versus offset (AVO) attributes were extracted along the decollement. When pore fluid pressure, l , exceeds 0.7, the pressure at which Poisson’s ratio begins to approach that of water, the AVO response of a fluid-filled, clay-rich decollement requires a high Poisson’s ratio and an excessively low seismic P-wave and S-wave velocity. Acute wedge taper, undercompacted subducted hemipelagic and pelagic sediments, and a smooth decollement in the northwest half of the survey correspond with decollement AVO response of relatively high values of Poisson’s ratio. These findings suggest increased pore fluid content and vertical containment of near-lithostatic pore fluid pressures within the decollement. In contrast, increased wedge taper angles, thin hemipelagic and pelagic sediments, and a rugose decollement beneath the southeastern frontal prism produce an AVO response interpreted as due to lower pore fluid contents and pressures. We propose that large-offset subducting basement normal faults in this area, as close as 20 m from the decollement, induce vertical fractures within the decollement that allow for fluid expulsion into the frontal prism and lower fluid pressure. Lateral variability of overpressure within the decollement shear zone of subduction margins is important in understanding the evolution of frontal prism strain accumulation and seismogenic rupture. / text

ITC/USA 2013 Conference Proceedings / The Forty-Ninth Annual International Telemetering Conference and Technical Exhibition / October 21-24, 2013 / Bally's Hotel & Convention Center, Las Vegas, NV / Over the past decade, SOQPSK has been widely adopted by the flight test community, and the low density parity check (LDPC) codes are now in widespread use in many applications. This paper defines the waveform and presents the bit error rate (BER) performance of SOQPSK coupled with a rate 2/3 LDPC code. The scheme described here expands the transmission bandwidth by approximately 56% (which is still 22% less than the legacy PCM/FM modulation), for the benefit of improving link margin by over 10 dB at BER = 10⁻⁶.

We present a robust iterative sparseness-constrained interpolation algorithm using 2/3D curvelet frames and Fourier-like transforms that exploits continuity along reflectors in seismic data. By choosing generic transforms, we circumvent the necessity to make parametric assumptions (e.g. through linear/parabolic Radon or demigration) regarding the shape of events in seismic data. Simulation and real data examples for data with moderately sized gaps demonstrate that our algorithm provides interpolated traces that accurately reproduce the wavelet shape as well as the AVO behavior. Our method also shows good results for de-aliasing judged by the behavior of the (f-k)-spectrum before and after regularization.