Being living systems unable to adjust their location to changing environmental conditions, plants display homeostatic networks that have evolved to maintain transition metal levels in a very narrow concentration range in order to avoid either deficiency or toxicity. Hence, plants possess a broad repertoire of mechanisms for the cellular uptake, compartmentation and efflux, as well as for the chelation of transition metal ions. A small number of plants are hypertolerant to one or a few specific transition metals. Some metal tolerant plants are also able to hyperaccumulate metal ions. The Brassicaceae family member Arabidopis halleri ssp. halleri (L.) O´KANE and AL´SHEHBAZ is a hyperaccumulator of zinc (Zn), and it is closely related to the non-hypertolerant and non-hyperaccumulating model plant Arabidopsis thaliana (L.) HEYNHOLD. The close relationship renders A. halleri a promising emerging model plant for the comparative investigation of the molecular mechanisms behind hypertolerance and hyperaccumulation. Among several potential candidate genes that are probably involved in mediating the zinc-hypertolerant and zinc-hyperaccumulating trait is AhHMA3. The AhHMA3 gene is highly similar to AtHMA3 (AGI number: At4g30120) in A. thaliana, and its encoded protein belongs to the P-type IB ATPase family of integral membrane transporter proteins that transport transition metals. In contrast to the low AtHMA3 transcript levels in A. thaliana, the gene was found to be constitutively highly expressed across different Zn treatments in A. halleri, especially in shoots. In this study, the cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O´KANE and AL´SHEHBAZ and Arabidopsis thaliana (L.) HEYNHOLD is described. Heterologously expressed AhHMA3 mediated enhanced tolerance to Zn and to a much lesser degree to cadmium (Cd) but not to cobalt (Co) in metal-sensitive mutant strains of budding yeast. It is demonstrated that the genome of A. halleri contains at least four copies of AhHMA3, AhHMA3-1 to AhHMA3-4. A copy-specific real-time RT-PCR indicated that an AhHMA3-1 related gene copy is the source of the constitutively high transcript level in A. halleri and not a gene copy similar to AhHMA3-2 or AhHMA3-4. In accordance with the enhanced AtHMA3mRNA transcript level in A. thaliana roots, an AtHMA3 promoter-GUS gene construct mediated GUS activity predominantly in the vascular tissues of roots and not in shoots. However, the observed AhHMA3-1 and AhHMA3-2 promoter-mediated GUS activity in A. thaliana or A. halleri plants did not reflect the constitutively high expression of AhHMA3 in shoots of A. halleri. It is suggested that other factors e. g. characteristic sequence inserts within the first intron of AhHMA3-1 might enable a constitutively high expression. Moreover, the unknown promoter of the AhHMA3-3 gene copy could be the source of the constitutively high AhHMA3 transcript levels in A. halleri. In that case, the AhHMA3-3 sequence is predicted to be highly homologous to AhHMA3-1. The lack of solid localisation data for the AhHMA3 protein prevents a clear functional assignment. The provided data suggest several possible functions of the AhHMA3 protein: Like AtHMA2 and AtHMA4 it might be localised to the plasma membrane and could contribute to the efficient translocation of Zn from root to shoot and/or to the cell-to-cell distribution of Zn in the shoot. If localised to the vacuolar membrane, then a role in maintaining a low cytoplasmic zinc concentration by vacuolar zinc sequestration is possible. In addition, AhHMA3 might be involved in the delivery of zinc ions to trichomes and mesophyll leaf cells that are major zinc storage sites in A. halleri. / Pflanzen sind lebende Systeme, die nicht in der Lage sind ihren Standort sich ändernden Umweltbedingungen anzupassen. Infolgedessen weisen Pflanzen homöostatischeNetzwerke auf, welche die Mengen an intrazellulären Übergangsmetallen in einem sehr engen Konzentrationsbereich kontrollieren um somit Vergiftungs- oder Mangelerscheinungen zu vermeiden. Eine kleine Anzahl von Pflanzen ist hypertolerant gegenüber einem oder mehreren Übergangsmetallen. Einige wenige dieser metalltoleranten Pflanzen sind fähig Übergangsmetalle in beträchtlichen Mengen zu speichern, sprich zu hyperakkumulieren, ohne Vergiftungserscheinungen zu zeigen. Die Haller’sche Schaumkresse (Arabidopis halleri ssp. halleri (L.) O´KANE und AL´SHEHBAZ) aus der Familie der Kreuzblütler (Brassicaceae) ist ein solcher Hyperakkumulator für Zink (Zn). Sie ist nah verwandt mit der Modellpflanze Ackerschmalwand (Arabidopsis thaliana (L.) HEYNHOLD), die jedoch nicht-hypertolerant und nicht-hyperakkumulierend für Übergangsmetalle ist. Diese nahe Verwandtschaft erlaubt vergleichende Studien der molekularen Mechanismen, die Hypertoleranz und Hyperakkumulation zu Grunde liegen. Zu der Gruppe von Kandidatengenen, die möglicherweise von Bedeutung für die Zink-hypertoleranten und -hyperakkumulierenden Eigenschaften von A. halleri sind, gehört AhHMA3, ein Gen mit großer Ähnlichkeit zu AtHMA3 (AGI Nummer: At4g30120) aus A. thaliana. Es kodiert ein Protein aus der Familie transmembraner Übergangsmetall-Transportproteine, den P-typ IB ATPasen. Im Gegensatz zu den niedrigen AtHMA3 Transkriptmengen in A. thaliana wird das AhHMA3 Gen in A. halleri in Gegenwart verschiedener Zn Konzentrationen konstitutiv hoch exprimiert, insbesondere im Spross der Pflanze. Diese Arbeit beschreibt die Klonierung und Charakterisierung des HMA3 Gens und seines Promoters aus A. halleri und A. thaliana. Es wurde gezeigt, dass heterolog exprimiertes AhHMA3 Protein in metallsensitiven Hefestämmen eine erhöhte Toleranz gegenüber Zink und zu einem geringen Grad gegenüber Kadmium (Cd) jedoch nicht gegenüber Kobalt (Co) vermittelt.Weiterhin wurden im Genom von A. halleri mindestens vier AhHMA3 Genkopien, AhHMA3-1 bis AhHMA3-4, nachgewiesen. Eine Genkopie-spezifische Echtzeit-RT-PCR (real-time RT-PCR) deutete darauf hin, dass eine zu AhHMA3-1 und nicht zu AhHMA3-2 oder AhHMA3-4 ähnliche Genkopie die Quelle der konstitutiv hohen Transkriptmengen in A. halleri ist. In Übereinstimmung mit erhöhten mRNS Transkriptmengen inWurzeln von A. thaliana, vermittelte ein AtHMA3 Promoter-GUS (ß-Glucuronidase) Genkonstrukt GUS-Aktivität hauptsächlich in den Leitgeweben der Wurzeln jedoch nicht des Sprosses. Die vermittelte GUS-Aktivität durch Promoterfragmente von AhHMA3-1 und AhHMA3-2 in A. thaliana oder A. halleri Pflanzen spiegelte jedoch nicht die konstitutiv hohe AhHMA3 Expression im Spross von A. halleri wieder. Es wird vermutet, dass andere Faktoren die konstitutiv hohe Expression ermöglichen wie zum Beispiel die gefundenen kopiespezifischen Sequenzinsertionen innerhalb des ersten AhHMA3-1 Introns. Weiterhin ist es denkbar, dass der unbekannte Promoter der AhHMA3-3 Genkopie die Quelle der konstitutiv hohen AhHMA3 Transkriptmengen ist. In diesem Fall wird eine sehr hohe Ähnlichkeit zwischen den Sequenzen von AhHMA3-3 und der AhHMA3-1 vorhergesagt. Es konnten keine deutlichen Ergebnisse zur intrazellulären Lokalisierung gemacht werden, die eine exakte Einordnung der Funktion des AhHMA3 Proteins erlauben würden. Die bisher ermittelten Ergebnisse schlagen jedoch mehrere mögliche Funktionen für AhHMA3 vor: Ähnlich den AhHMA3 homologen Proteinen, AtHMA2 und AtHMA4, könnte AhHMA3 in der Plasmamembran der Zelle sitzen und dort zur effizienten Translokation von Zink aus der Wurzel in den Spross und/oder zur Zell-zu-Zell Verteilung von Zn im Spross beitragen. Falls AhHMA3 in der Membran der Vakuole sitzt, könnte es eine Rolle bei der Aufrechterhaltung niedriger zytoplasmatischer Zinkkonzentrationen durch vakuoläre Zinksequestrierung spielen. Zusätzlich ist es denkbar, dass AhHMA3 an der Abgabe von Zinkionen an Trichome und Blattmesophyllzellen beteiligt ist, die die Haupteinlagerungsorte für Zink in A. halleri darstellen.

This work involved the development of new perovskite oxides based on SmFeO3 and testing their performances as sensors for reducing gases (H2, CO & CH4) and as anode materials for dry methane oxidation in solid oxide fuel cells. The new perovskite oxide materials with formula Sm0.95Ce0.05Fe1-xMxO3-δ (M= Co, Ni & Cr) were synthesized by a sol gel method using citric acid as a complexing agent. The resulting materials were characterized by using a battery of techniques including XRD, XRF, XPS, SEM and electrochemical methods. Sensing experiments revealed that both cobalt doped and Cr doped materials can detect H2, CO and CH4 in air at different temperatures including room temperature. The Ni doped materials did not prove good candidates as sensors. However, their reduction treatment studies showed the formation of metallic nanoparticles on the surface which deeply influence their electrical conductivity as well as sensing ability. Consequently, this modification in surface structure and chemical composition enabled them to sense hydrogen gas at 300oC very effectively. The response of sensors based on these reduced materials was measurable and reversible. Some materials were also selected on the basis of their reduction stability and electrical properties, and their electrochemical performances were evaluated as SOFC anodes under dry methane and dry hydrogen fuels separately. The performance tests as SOFC anode revealed that the best anode material for the oxidation of dry hydrogen fuel is Sm0.95Ce0.05FeO3-δ. Furthermore, Sm0.95Ce0.05FeO3-δ proved to be coke resistant anode under dry methane fuel and exhibited reasonably low charge transfer resistance values at temperatures between 600-700oC. The doping of Co and Ni at the B-site of Sm0.95Ce0.05FeO3-δ found to be very effective in further improving its performance as SOFC anode towards oxidation of dry methane fuel at the lower temperatures.

This work involved the development of new perovskite oxides based on SmFeO3 and testing their performances as sensors for reducing gases (H2, CO & CH4) and as anode materials for dry methane oxidation in solid oxide fuel cells. The new perovskite oxide materials with formula Sm0.95Ce0.05Fe1-xMxO3-δ (M= Co, Ni & Cr) were synthesized by a sol gel method using citric acid as a complexing agent. The resulting materials were characterized by using a battery of techniques including XRD, XRF, XPS, SEM and electrochemical methods. Sensing experiments revealed that both cobalt doped and Cr doped materials can detect H2, CO and CH4 in air at different temperatures including room temperature. The Ni doped materials did not prove good candidates as sensors. However, their reduction treatment studies showed the formation of metallic nanoparticles on the surface which deeply influence their electrical conductivity as well as sensing ability. Consequently, this modification in surface structure and chemical composition enabled them to sense hydrogen gas at 300oC very effectively. The response of sensors based on these reduced materials was measurable and reversible. Some materials were also selected on the basis of their reduction stability and electrical properties, and their electrochemical performances were evaluated as SOFC anodes under dry methane and dry hydrogen fuels separately. The performance tests as SOFC anode revealed that the best anode material for the oxidation of dry hydrogen fuel is Sm0.95Ce0.05FeO3-δ. Furthermore, Sm0.95Ce0.05FeO3-δ proved to be coke resistant anode under dry methane fuel and exhibited reasonably low charge transfer resistance values at temperatures between 600-700oC. The doping of Co and Ni at the B-site of Sm0.95Ce0.05FeO3-δ found to be very effective in further improving its performance as SOFC anode towards oxidation of dry methane fuel at the lower temperatures.

This work involved the development of new perovskite oxides based on SmFeO3 and testing their performances as sensors for reducing gases (H2, CO & CH4) and as anode materials for dry methane oxidation in solid oxide fuel cells. The new perovskite oxide materials with formula Sm0.95Ce0.05Fe1-xMxO3-δ (M= Co, Ni & Cr) were synthesized by a sol gel method using citric acid as a complexing agent. The resulting materials were characterized by using a battery of techniques including XRD, XRF, XPS, SEM and electrochemical methods. Sensing experiments revealed that both cobalt doped and Cr doped materials can detect H2, CO and CH4 in air at different temperatures including room temperature. The Ni doped materials did not prove good candidates as sensors. However, their reduction treatment studies showed the formation of metallic nanoparticles on the surface which deeply influence their electrical conductivity as well as sensing ability. Consequently, this modification in surface structure and chemical composition enabled them to sense hydrogen gas at 300oC very effectively. The response of sensors based on these reduced materials was measurable and reversible. Some materials were also selected on the basis of their reduction stability and electrical properties, and their electrochemical performances were evaluated as SOFC anodes under dry methane and dry hydrogen fuels separately. The performance tests as SOFC anode revealed that the best anode material for the oxidation of dry hydrogen fuel is Sm0.95Ce0.05FeO3-δ. Furthermore, Sm0.95Ce0.05FeO3-δ proved to be coke resistant anode under dry methane fuel and exhibited reasonably low charge transfer resistance values at temperatures between 600-700oC. The doping of Co and Ni at the B-site of Sm0.95Ce0.05FeO3-δ found to be very effective in further improving its performance as SOFC anode towards oxidation of dry methane fuel at the lower temperatures.

Les semi-conducteurs transparents de type oxyde, communément appelés TCO (Transparent Conducting Oxides) sont utilisés comme électrodes transparentes dans des nombreux d'applications telles que les cellules solaires, les écrans à cristaux liquides, les écrans tactiles et autres. Toutefois, les applications technologiques sont actuellement limitées puisque les TCO possédant des propriétés électriques et optiques satisfaisantes sont uniquement des semi-conducteurs de type n. Les oxydes de cuire de structures delafossite ACuO2 ou du type SrCu2O2, présentent des prometteuses avec un comportement de semi-conduction de type P et une faible absorption optique dans le spectre visible. Dans cette thèse, le systèm MOCVD (Dépôt chimique en phase vapeur du métal organique) a été utilisé pour le dépôt des couches minces de SrCu2O2. Cette phase est obtenue après quelques étapes de recuit sous oxygène puis argon, ou azote uniquement avec en particulier la nécessité de réalier des recuit rapaides. Les propriétés électriques et optiques mesurées pour la couche mince de SrCu2O2 ont un ordre de grandeur similaire à ce qui est publié dans la littérature. / Transparent conducting oxides (TCOs) as transparent electrodes in the form of thin film are used in a large number of applications such as solar cells, liquid crystal displays, touch screen etc. However, these technological applications of TCOs are still limited because of the availability of only n-type TCOs. For diverse technological applications synthesis of efficient p-type TCOs is of utmost importance. In p-type TCO category, copper oxides of delafossite structure (ACuO2) or SrCu202 structure show promising opto-electrical properties. In this PhD research work, MOCVD (Metal Organic Chemical Vapor Deposition) technique has been used for depositing thin films of SrCu2O2. However, pure and crystalline phase of SrCu2O2 was achieved after some annealing steps under oxygen and then under argon or only in nitrogen, with rapid heating and cooling rate. The measured electrical and optical properties are of the same order reported in various journals.

Magister Scientiae - MSc (Physics) / Electron-mediated nuclear plasma interactions (NPIs), such as Nuclear Excitation by Electron Capture (NEEC) or Transition (NEET), can have a signi cant impact on nuclear cross sections in High Energy Density Plasmas (HEDPs). HEDP environments are found in nuclear weapons tests, National Ignition Facility (NIF) shots and in the cosmos where nucleosynthesis takes place. This thesis explores the impact of NPIs on highly excited nuclei. This impact is understood to be more intense in highly-excited nuclei states in the quasi-contiuum which is populated by nuclear reactions prior to their decay by spontaneous -ray emission.

This work involved the development of new perovskite oxides based on SmFeO3 and testing their performances as sensors for reducing gases (H2, CO & CH4) and as anode materials for dry methane oxidation in solid oxide fuel cells. The new perovskite oxide materials with formula Sm0.95Ce0.05Fe1-xMxO3-δ (M= Co, Ni & Cr) were synthesized by a sol gel method using citric acid as a complexing agent. The resulting materials were characterized by using a battery of techniques including XRD, XRF, XPS, SEM and electrochemical methods. Sensing experiments revealed that both cobalt doped and Cr doped materials can detect H2, CO and CH4 in air at different temperatures including room temperature. The Ni doped materials did not prove good candidates as sensors. However, their reduction treatment studies showed the formation of metallic nanoparticles on the surface which deeply influence their electrical conductivity as well as sensing ability. Consequently, this modification in surface structure and chemical composition enabled them to sense hydrogen gas at 300oC very effectively. The response of sensors based on these reduced materials was measurable and reversible. Some materials were also selected on the basis of their reduction stability and electrical properties, and their electrochemical performances were evaluated as SOFC anodes under dry methane and dry hydrogen fuels separately. The performance tests as SOFC anode revealed that the best anode material for the oxidation of dry hydrogen fuel is Sm0.95Ce0.05FeO3-δ. Furthermore, Sm0.95Ce0.05FeO3-δ proved to be coke resistant anode under dry methane fuel and exhibited reasonably low charge transfer resistance values at temperatures between 600-700oC. The doping of Co and Ni at the B-site of Sm0.95Ce0.05FeO3-δ found to be very effective in further improving its performance as SOFC anode towards oxidation of dry methane fuel at the lower temperatures.

This dissertation has two intersecting foci; firstly, the discovery of a new methodology for the growth of high surface area cuprous oxide (Cu2O) substrates. Secondly, the synthesis and characterization of electron-accepting molecules, and their incorporation into excitonic solar cells (XSCs) using the Cu2O substrates as electrodes. Increasing the surface area of the semiconductor creates more locations for charge transfer to occur thus increasing the overall efficiency of the device. Zinc oxide (ZnO) has been widely studied, and can be easily grown into many different films with high surface area morphologies. The ZnO films serve as sacrificial templates that allow us to electrochemically grow new semiconductors with the same high surface area morphologies but composed of a material having more desirable electronic properties. A polymer can be applied over the surface of the ZnO nanorod films before etching the ZnO with a weak acid, thereby leaving a polymer nanopore membrane. Cathodic electrodeposition of Cu2O into the membrane nanopores gives Cu2O nanorods. Electron-accepting dyes are designed with tethers that allow for direct attachment to metal oxide semiconductors. After soaking, the semiconductor is coated with a monolayer of a dye and then the coated semiconductor films were made into various dye-sensitized solar cells (DSCs). These cells were studied to determine the electron transport properties at the semiconductor/sensitizer/electrolyte interface.

Na+,K+-ATPase (NKA) is a membrane protein which assists in maintaining the electrochemical potential across the cell membrane. It has been suggested that the oligomerization of NKA may play a role in intracellular regulation of NKA activity. Monte Carlo simulations of NKA on a picket-fence membrane model were performed to examine if clustering has an effect on NKA efficiency. The results show that for a simple model of NKA interaction, oligomerization may drastically reduce the efficiency as measured in ATP turnover rate. Introducing a rate limit shows a clear separation between monomers and higher levels of oligomerization. / Na+,K+-ATPase (NKA) is a membrane protein which assists in maintaining the electrochemical potential across the cell membrane. It has been suggested that the oligomerization of NKA may play a role in intracellular regulation of NKA activity. Monte Carlo simulations of NKA on a picket-fence membrane model were performed to examine if clustering has an effect on NKA efficiency. The results show that for a simple model of NKA interaction, oligomerization may drastically reduce the efficiency as measured in ATP turnover rate. Introducing a rate limit shows a clear separation between monomers and higher levels of oligomerization.

Layered transition metal dichalcogenides (TMDs) are potentially ideal semiconducting materials due to their in-plane carrier transport and tunable bandgaps, which are favorable properties for electrical and optoelectronic applications. However, the ability to make p-n junctions is the foundation of semiconductor devices, and therefore the ability to achieve reproducible p- and n-type doping in TMD semiconducting materials is critical. In this work, p-type substitutional doping of pulsed laser deposited WS2 films with niobium is reported. The synthesis technique of the PLD target with dopant incorporation which also ensures host material stoichiometry is presented. Hall electrical measurements confirmed stable p-type conductivity of the grown films. Structural characterization revealed that there was no segregation phase of niobium in the fabricated films and x-ray phtoelectron spectroscopy (xps) characterization suggest that the p-type doping is due to Nb4+ which results in p-type behavior. Stable hole concentrations as high as 10E21(cm-3) were achieved. The target fabrication and thin film deposition technique reported here can be used for substitutional doping of other 2D materials to obtain stable doping for device applications.