We examine a model of solid-solid phase transitions that includes thermo-elastic effects and an order parameter. The model is derived as a special case of the Gurtin-Fried model posed in one space dimension with a symmetric triple-well free energy in which the relative heights of the wells vary with temperature. We examine the temperature independent case, showing existence of a unique classical solution of a regularized system of partial differential equations using semigroup theory. This is followed by numerical study of a finite element algorithm for the temperature independent model. Finally, we present computational material concerning the temperature dependent model. / Ph. D.

The topic of this thesis is the moduli theory of (parabolic) sheaves on stable curves. Using geometric invariant theory (GIT), universal moduli spaces of semistable parabolic sheaves on stable marked curves are constructed: `universal' indicates that these are moduli spaces of pairs where the underlying marked curve may vary as well as the parabolic sheaf (as in the Pandharipande moduli space for pairs of stable curves and torsion-free sheaves without augmentations). As an intermediate step in this construction, we construct moduli spaces of semistable parabolic sheaves on flat families of arbitrary projective schemes (of any dimension or singularity type): this is the technical core of this thesis. These moduli spaces are projective, since they are constructed as GIT quotients of projective parameter spaces. The stability condition for parabolic sheaves depends on a choice of polarisation and is derived from the Hilbert-Mumford criterion. It is not quite the same as traditional stability with respect to parabolic Hilbert polynomials, but it is closely related to it, and the resulting moduli spaces are always compactifications of moduli of slope-stable parabolic sheaves. The construction works over algebraically closed fields of arbitrary characteristic.

This thesis is motivated by some of the recent results of the solvability of elliptic PDE in Lipschitz domains and the relationships between the solvability of different boundary value problems. The parabolic setting has received less attention, in part due to the time irreversibility of the equation and difficulties in defining the appropriate analogous time-varying domain. Here we study the solvability of boundary value problems for second order linear parabolic PDE in time-varying domains, prove two main results and clarify the literature on time-varying domains. The first result shows a relationship between the regularity and Dirichlet boundary value problems for parabolic equations of the form Lu = div(A∇u)−ut = 0 in Lip(1, 1/2) time-varying cylinders, where the coefficient matrix A = [aij(X, t)] is uniformly elliptic and bounded. We show that if the Regularity problem (R)p for the equation Lu = 0 is solvable for some 1 < p < then the Dirichlet problem (D*) 1 p, for the adjoint equation L*v = 0 is also solvable, where p' = p/(p − 1). This result is analogous to the one established in the elliptic case. In the second result we prove the solvability of the parabolic Lp Dirichlet boundary value problem for 1 < p ≤ ∞ for a PDE of the form ut = div(A∇u)+B ·∇u on time-varying domains where the coefficients A = [aij(X, t)] and B = [bi(X, t)] satisfy a small Carleson condition. This result brings the state of affairs in the parabolic setting up to the current elliptic standard. Furthermore, we establish that if the coefficients of the operator A and B satisfy a vanishing Carleson condition, and the time-varying domain is of VMO-type then the parabolic Lp Dirichlet boundary value problem is solvable for all 1 < p ≤ ∞. This is related to elliptic results where the normal of the boundary of the domain is in VMO or near VMO implies the invertibility of certain boundary operators in Lp for all 1 < p < ∞. This then (using the method of layer potentials) implies solvability of the Lp boundary value problem in the same range for certain elliptic PDE. We do not use the method of layer potentials, since the coefficients we consider are too rough to use this technique but remarkably we recover Lp solvability in the full range of p's as the elliptic case. Moreover, to achieve this result we give new equivalent and localisable definitions of the appropriate time-varying domains.

In this thesis, we extend De Giorgi's interpolation method to a class of parabolic equations which are not gradient flows but possess an entropy functional and an underlying Lagrangian. The new fact in the study is that not only the Lagrangian may depend on spatial variables, but also it does not induce a metric. Assuming the initial condition is a density function, not necessarily smooth, but solely of bounded first moments and finite "entropy", we use a variational scheme to discretize the equation in time and construct approximate solutions. Moreover, De Giorgi's interpolation method is revealed to be a powerful tool for proving convergence of our algorithm. Finally, we analyze uniqueness and stability of our solution in L¹.

This thesis concerns the boundary behavior of solutions to parabolic equations. It consists of a comprehensive summary and four scientific papers. The equations concerned are different generalizations of the heat equation. Paper I concerns the solutions to non-linear parabolic equations with linear growth. For non-negative solutions that vanish continuously on the lateral boundary of an NTA cylinder the following main results are established: a backward Harnack inequality, the doubling property for the Riesz measure associated with such solutions, and the Hölder continuityof the quotient of two such solutions up to the boundary. Paper 2 concerns the solutions to linear degenerate parabolic equations, where the degeneracy is controlled by a Muckenhoupt weight of class 1+2/n. For non-negative solutions that vanish continuously on the lateral boundary of an NTA cylinder the following main results are established: a backward Harnack inequality, the doubling property for the parabolic measure, and the Hölder continuity of the quotient of two such solutions up to the boundary. Paper 3 concerns a fractional heat equation. The first main result is that a solution to the fractional heat equation in Euclidean space of dimension n can be extended as a solution to a certain linear degenerate parabolic equation in the upper half space of dimension n+1. The second main result is the Hölder continuity of quotients of two non-negative solutions that vanish continuously on the latteral boundary of a Lipschitz domain. Paper 4 concerns the solutions to uniformly parabolic linear equations with complex coefficients. The first main result is that under certain assumptions on the opperator the bounds for the single layer potentials associated to the opperator are bounded. The second main result is that these bounds always hold if the opperator is realvalued and symmetric.

HAWE Hydraulic SE, Munich, engineers and manufactures hydraulic drives (CSP-drives) for parabolic trough plants consisting of a compact power pack, directional and control valves, over-center valves, two cylinders and the fittings/hoses for connecting these components. Optional, but this is depending on the system and the control philosophy, also a hydralic accumulator. An optimized hydraulic drive for a parabolic trough field makes the power plant operator profit from savings at components, higher system efficiency, lower operational energy supply needs, less time spent on commissioning and first start-up, lower maintenance effort and increased life span of the drive and finally also savings on peripheral and safety devices. Many of shown proposals are even combining two or more of above mentioned advantages.

In this work, two approaches for computing the near-field distribution around wind turbines are proposed, including: (1) Huygens Principle and (2) the parabolic equation technique. In order to simplify the problem, the cylinder model is utilized to represent the wind turbines and transform the problem into a two-dimensional case. To make Huygens Principle computationally tractable, several approximations are made based on the problem geometry especially modelling the cylinder as a plate. The expression of the electromagnetic field radiated by the equivalent magnetic current can be analytically solved by the error function. To verify the results, FEKO is utilized to simulate the scattering of infinitely long cylinders using periodic boundary condition (PBC). In order to solve the problem of multiple cylinders, a modified method is derived. For more accurate results, the parabolic equation (PE) technique is utilized to solve this problem, which is usually utilized to solve wave propagation problems. In this case, wide-angle approximation is used to solve the parabolic equation, which can obtain accurate results in a region of up to 45 degrees. Although these two approaches are not full-wave simulation, the calculation time is significantly reduced and the error is acceptable. To further verify the computed results by the parabolic equation technique, two commercial transceivers from Time Domain Corporation are used to measure the field distribution behind a finite-length metal pole. The frequency-domain results are obtained from the measured time-domain results using the fast Fourier transform. It is shown that the computed results by the parabolic equation technique agree well with the measurement results. / text

In this thesis, certain issues relating to a number of wave energy absorbers operating in the same vicinity are investigated. Specifically, arrangements of the devices within such an array are sought, such that beneficial hydrodynamic interference between members is exploited and unwanted effects mitigated. Arrays of `point absorber' devices as well as converters with multiple closely spaced floats are modelled and a frequency domain hydrodynamic solution derived. This is implemented as efficient computer code, capable of producing the full linear wave theory solution to any desired degree of accuracy. Furthermore, the results are verified against output from the boundary element code WAMIT. Initially, detailed analysis of an isolated absorber is conducted, with motion responses, forces, power output and velocity potentials at the free surface computed for a range of different device specifications. Elementary examples of arrays are then used to demonstrate the influence of factors such as device separation, wave heading angle, number of devices and array configuration upon collective performance. Subsequently, the power output from an array of five devices is optimised with respect to its layout, using two different routines. The first is a new heuristic approach, named the Parabolic Intersection (PI) method, that efficiently creates array con figurations using only basic computations. The second is a Genetic Algorithm (GA) with a novel `crossover' operator. Each method is applied to maximise the output at a given regular wave frequency and direction under two different power take-off regimes and also to minimise power in a third, cautionary example. The resulting arrays are then analysed and the optimisation procedures themselves evaluated. Finally, the effects of irregular seas on array interactions are investigated. The configurations that were optimised for regular wave climates are assessed in a range of irregular sea-states. The GA is then used once more to create optimal array layouts for each of these seas. The characteristics of the arrays are subsequently examined and the influence of certain spectral parameters on the optimal solutions considered. The optimisation procedures were both found to be effective, with the GA marginally outperforming the PI method in all cases. Significant positive and negative modifications to the power output were observed in the arrays optimised in regular waves, although the effects weakened when the same arrays were subjected to irregular sea-states. However, arrays optimised specifically in irregular seas exhibited differences in net power output equivalent to over half that produced from the same number of devices in isolation.

We are interested in two probabilistic models of a process interacting with a random environment. Firstly, we consider the model of directed polymers in random environment. In this case, a polymer, represented as the path of a simple random walk on a lattice, interacts with an environment given by a collection of time-dependent random variables associated to the vertices. Under certain conditions, the system undergoes a phase transition from an entropy-dominated regime at high temperatures, to a localised regime at low temperatures. Our main result shows that at high temperatures, even though a central limit theorem holds, we can identify a set of paths constituting a vanishing fraction of all paths that supports the free energy. We compare the situation to a mean-field model defined on a regular tree, where we can also describe the situation at the critical temperature. Secondly, we consider the parabolic Anderson model, which is the Cauchy problem for the heat equation with a random potential. Our setting is continuous in time and discrete in space, and we focus on time-constant, independent and identically distributed potentials with polynomial tails at infinity. We are concerned with the long-term temporal dynamics of this system. Our main result is that the periods, in which the profile of the solutions remains nearly constant, are increasing linearly over time, a phenomenon known as ageing. We describe this phenomenon in the weak sense, by looking at the asymptotic probability of a change in a given time window, and in the strong sense, by identifying the almost sure upper envelope for the process of the time remaining until the next change of profile. We also prove functional scaling limit theorems for profile and growth rate of the solution of the parabolic Anderson model.

The introduction of software radio has meant that standards for radio communication can evolve in a much more natural way, changing only a little at a time without making all of the hardware obsolete. It has become apparent that these changes may affect some systems more favourably than others so allowing the software radio to decide how to adapt can actually improve the link quality. This development is known as cognitive radio and can improve the performance of a single radio link. As an extension of this progress is being made on designing cognitive networks where the software radios which make up the network not only optimise their own link but share information about their goals and situation with other nodes in the network, using all of this data together can optimise overall end-to-end performance of the network. These advances in network design and optimisation come at a time where many parts of the world are re-structuring the television broadcast bands. These have been allocated for a long time and are a generous allocation of a valuable resource. With the power of a cognitive network it is possible to design equipment that can automatically avoid the licensed TV transmitters which only take a fraction of the total bandwidth in any one area. This allows many smaller cells to be fitted between the main transmitters. Assessing the availability of bandwidth and generating maps of available spectrum for these new cognitive networks requires a new approach to radio propagation modelling in the TV bands. Previous models use a worst case scenario to make sure that there is at least enough signal to receive the public service broadcasts in the majority of homes. Predicting where the limits of reception are and where it would be safe to broadcast on these channels requires a better, terrain dependent transmission model. In this thesis the Parabolic Equation Model is applied to the problem of predicting TV band occupancy and the results of this modelling is compared to field measurement to get an idea of how accurate the model is in practice.