The master’s thesis processes project documentation for construction of Truck service, i.e. object for service and maintenance of trucks with built-in administrative part, situated in Letohrad. The proposed building is a onestorey hall, built-in floors are designed in the administrative part and auxiliary operating areas. The main entrance to the building with income for customers is located in the administrative part. Most of the first floor has a service hall with associated workshops and truck wash space. The supporting structure of the building is designed prefabricated reinforced concrete skeleton with continuous columns and girders mounted on short column brackets. The cladding of the service hall is designed with sandwich panels. The cladding of the administrative part is made of Ytong filler masonry. The facade of the administrative part is designed as ventilated. The horizontal load-bearing structures are assembled from Spiroll prestressed reinforced concrete ceiling panels. The roof is designed as typical for hall buildings, i.e. it is flat single-skinned roof with behind attica gutters and between roofs gutters formed by valleys falling down to the roof drains by spreading wedges.

The master´s thesis elaborates the project documentation for the construction of the District Police of the Czech Republic in Brno. The new building is situated in the north of city part Bohunice. It´s a three- floor object with partial basement and flat roof. The bearing perimeter masonry, internal bearing masonry and internal non- load bearing masonry are made with technology from ceramic hollow blocks. Ceiling construction is designed from prestressed ceiling panels. The perimeter walls of the of the underground floor are made from blocks of lost formwork, which is insulated with extruded polystyrene. The walls on the above- ground floors are insulated by a combination of contact thermal insulation system and ventilated facades with fiber- cement facade cladding boards.

The main goal of this diploma project is to produce an architectural study of the Moravian Wine Centre Brno (MVC) located on Hlinky Street in Brno, Czech Republic. Study also includes a concept of urban planning at Zluty Kopec area. Proposed urban ideas lead to development of a bidirectional passable park area and create an axis leading towards Moravian Wine Centre. MVC is a multifunctional building which contains the following space and operations: a leasable retail space for winemakers, space for wine degustation and archive boxes, a congress center with multifunctional hall, offices of The Czech Republic Institute of Wine, a gastrostudio, a viewing terrace restaurant, a cafe, a hotel type of accommodation in double rooms and suites, apartments with roof terraces, a wellness centre and space for wine production. Design of the proposed MVC complements surrounding buildings built in functionalist era and highlights the enter of proposed park. The facade is functionally pure with an accent of colored glass. An important part of the proposal is to link the design of new building with the historic cellars with tradition of wine processing. A part of this project was to design an interior spiral staircase connecting the basement with the entrance area. The construction of building contains integrated elements of renewable resources of energy such as photovoltaic facade.

Due to diverse surrounding area and position of isolated large objects suggest itself solving of conception by stages. In the southern part there were suggested new sports halls which have a long term tradition in this area. These buildings keep to the axis of Sportovní street and they are reacting to existing buildings on the other side. In the northern part at the shopping centre it was necessary make the place accesible and grass the place over and use the opportunity of the large space. In the northeastern part there is housing development and it reacts on the FRRMS building and it makes confotable enviroment for living. Buildings FRRMS together with rampats and bushy vegetation are isolating flat buildings. Effort to connect existing and establish new resulted in the simple solution solution that does not disrupt the neighborhood, on the contrary, trying to blend in with the city and calm the chaos in this area.

This diploma thesis deals with the study of the new development of the current development area of the town of Kroměříž in its northeastern part behind the psychiatric hospital between the streets Lutopecká and Havlíčková. This territory connects the local part of Terezov and Barbořina. The aim of the study was to propose new housing for more than 1,200 inhabitants in a currently unbuilt area in accordance with a valid territorial plan. The solved territory is divided into three stages of construction. The northeastern part follows the existing housing development with two-storey apartment buildings. In the rest of the area there are designed individual houses and partly terraced houses. The area is complemented by a kindergarten, shops and a parking house. In accordance with the territorial plan there is also a park and a sports ground with a playground and a sports hall. The character of the territory is greatly influenced by some already existing engineering networks and their protection zones, the transfer of which is economically disadvantageous. Due to the marginal position of the solved territory, the study proposes the extension of the service by public transportation by another two places. The new transport link between streets Lutopecká and Havlíčková would cause a significant traffic movement to increase over the area, so the study envisages a calm traffic in the form of a maximum speed limitation of 30 km/h and the communication system consists of two-way and one-way communications. Transportation is provided by the garages belonging to family houses supported with parking along the roads. In the apartment part, parking is possible in the outdoor parking lots and to supplement the necessary capacity, the study also proposes a parking house.

Content of the Diploma thesis is the design documentation a block of flats with trade gallery in Tábor. The design documentation and annexes of diploma thesis are elaborated according to present valid laws, goverment´s restrictions and standards. This object is located on plot no. 1457/33 and 1457/1 cadastre unit Tábor. The building is situated in area designated to housing development. Next to the land are there public infrastructure. The apartment building is divided into 20 flats including one accessible flat and café for 60 customers and max 5 employees. Flats are located from second floor except accessible flat, which is in grounfloor. In grounfloor is common storage area and utility room. Building has four (above-ground) floor. Object is dimensioned 31,7 x 25,2 m and high 13,6 m.The object is builded on finished grade. Load-bearing structural systém is from hollow bricks. Building has flat roof and whole object is thermal insulated.

The subject of this diploma thesis is the elaboration of project documentation for the construction of a new sports center with a specialization in the field of health technology. The building will be located in the town of Velké Meziříčí, on the street Školní and will be located on the plot 5917/16 with a total area of 17 820,2 m2. The total built-up area of the proposed building is 919,88 m2. The object is designed as stand-alone. It has a ragged shape, which consists of three adjoining rectangles, has two above ground floors with a partial basement. The building will be based on concrete foundation girders. The support system is chosen as a brick longitudinal with reinforcing walls. Perimeter masonry will be designed from cut ceramic blocks in above-ground floors and lost formwork in the basement. The ceiling structure consists of prestressed ceiling panels. The entire building is designed with a ventilated facade of two types of cement-bonded slabs. The grille of the ventilated facade will be made of glass fiber fiberglass. The roof of the building is designed as flat single-skinned. The building is designed for sports, including a sports bar and a clubhouse, which are open to the general public. There are 40 parking spaces, of which 3 for people with reduced mobility. During processing the emphasis was put on the appropriate layout, building-technical and architectural design and safe use of the building.

This diploma thesis is focused on the rehabilitation of adjacent surroundings of the historical center of Kyjov and revitalizing public spaces. Part of the thesis are the analysis of the current condition of the solved and affected area, problems evaluation and values of the territory and draft of a new building structure along with a working transport solution. The main criterion for the choice of the area to be solved for me was the problem of this locality with conjunction to industry area of the mills and a very small percentage of the quality of the territory. The mill site occupies almost a quarter of the area and together with surrounding buildings, makes a large impassable barrier in the city. The draft seeks to respond to the functioning state of the site and to rehabilitate the surrounding environment. Another factor for the selection of the territory was the unused potential of the river side Kyjovka flowing through the area. This area hides many other problems and there is no quality architecture. My task was to combine all aspects of the area and make the most of it for the draft. A new functional neighborhood of housing with public spaces and amenities is being designed on the area. The draft include 2 new streets, 4 public spaces, pedestrian zone, Kyjovka riverside, 45 new buildings and 10 reconstructed buildings. The concept of the area also concerns the transfer of the existing main railway station. The draft is also aimed on the main problem of Kyjov, as a growing age population, the poor quality of services and commuting to work.

The diploma thesis related to rehabilitation of the historical inside and adjacent neighborhood Kyjov deals with the analysis of the actual state of the city, the evaluation of its problems and potential and the subsequent design of the urbanistic, transport and functional solution. The goal of the thesis is to create better life conditions and thus to attract more new inhabitants to the city. Building new apartment buildings, leisure centers and coworking centers could help to achieve the goal. Designing of new public spaces, which offer plenty of meeting and relaxing places makes the life more quality. The new form of the city is designed with an emphasis on urbanistic contemporary approaches and views, and related to the view of the city as a safe place for pedestrians.

This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation