1 |
Design Optimization of Modern Machine-drive Systems for Maximum Fault Tolerant and Optimal OperationSarikhani, Ali 29 October 2012 (has links)
Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems.
A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques.
The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions.
The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail.
To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.
|
2 |
Ανάλυση και έλεγχος αιολικού συστήματος παραγωγής ηλεκτρικής ενέργειας με σύγχρονη μηχανή με μόνιμους μαγνήτεςΓκουντρουμάνη, Βάια 14 October 2013 (has links)
Η παρούσα διπλωματική εργασία πραγματεύεται τη μελέτη μιας διάταξης ανεμογεννήτριας με σύγχρονη μηχανή με μόνιμους μαγνήτες η οποία συνδέεται μέσω dc διασύνδεσης με το δίκτυο. Τη dc διασύνδεση τη δημιουργεί ένας dc πυκνωτής και από την πλευρά της μηχανής υπάρχει ένας ac/dc πλήρως ελεγχόμενος ανορθωτής ισχύος ενώ από την πλευρά του δικτύου βρίσκεται ένας dc/ac πλήρως ελεγχόμενος αντιστροφέας ισχύος.
Σκοπός της εργασίας είναι αρχικά να μελετήσουμε θεωρητικά το συνολικό σύστημα της ανεμογεννήτριας χρησιμοποιώντας το μετασχηματισμό Park για τη μοντελοποίηση του στο d-q πλαίσιο αναφοράς. Στη συνέχεια προχωρούμε στον υπολογισμό των εξισώσεων στο χώρο κατάστασης και τελικά προτείνουμε ένα σύστημα ελέγχου το οποίο βασίζεται στους PI ελεγκτές.
Τέλος, προσομοιώνουμε το παραπάνω σύστημα με τη βοήθεια της εφαρμογής Simulink του λογισμικού MATLAB και μελετώντας τα αποτελέσματα, εξάγουμε τα ανάλογα συμπεράσματα. / This thesis deals with the study of a wind turbine device with a permanent magnet synchronous machine which is connected with the grid side via a dc interconnection. The dc link is created by a dc capacitor and on the machine side there is an ac / dc power converter while on the grid side there is a dc / ac power converter, both of which are totally controlled.
Aim of this thesis is to study the complete wind turbine system in the d-q rotating vertical axes system through the Park transformation. Then we calculate the state space equations and propose a control system based on PI controllers.
Finally, we simulate the complete system with the MATLAB Simulink and having studied the results, we draw conclusions.
|
3 |
Enhanced finite-element and reduced-order modelling of permanent-magnet synchronous machinesPinto, Diogo 24 August 2021 (has links) (PDF)
The number of electrical machines used in modern road-vehicles is continuously increasing to meet regulatory requirements regarding safety and efficiency, as well as consumer expectations in terms of comfort. For auxiliary applications, such as cooling fan or pumps, permanent-magnet synchronous machines (PMSMs) are extensively used owing to their high power density. This thesis focuses on the modelling aspects of PMSMs, with a particular focus on finite-element and reduced-order models to be used in system-level simulations. 2-D and 3-D parametric finite-element (FE) models are developed, allowing to compute irreversible demagnetization in addition to the standard quantities such as torque, back electromotive force and flux-linkages. The effects of magnet overhang on the performance of an interior PMSM is briefly discussed. Using the FE model, a reduced-order lookup-table (LUT) based electromagnetic model, having similar accuracy as FE analysis, is then developed. Coupled to a mechanical state-space representation obtained from a modal FE analysis, the final model allows to compute electromagnetic induced vibrations under pulse width modulation supply. The validation of the complete workflow is carried out on a 12slot-10pole PMSM used to drive a cooling fan. After fitting the damping coefficient in the structural state-space model, the results are in agreement with the experimental results. Due to the usage of LUTs, the simulation time is low compared to a pure FE analysis. This allows the model to be used to optimize low noise control strategies. To conclude this thesis, the parametric FE model is used in an optimization routine to minimize the cost and vibrations of the motor, whilst satisfying the working points. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished
|
4 |
Position Sensor-less Schemes For Vector Control Of Permanent Magnet Synchronous MachineSugantha, K 11 1900 (has links) (PDF)
This thesis deals with the modelling, simulation and control of Permanent Magnet Synchronous Machines (PMSM) used specially in electric and hybrid vehicles. With the availability of fast semiconductor switches and high speed processors, Vector controlled drives are gaining popularity. One disadvantage of this type of control however, is the need for high cost, high resolution sensors (encoders) for determining the rotor position. Position sensorless schemes have evolved over a decade and this thesis addresses this issue.
Two schemes have been proposed for the elimination of encoders in vector controlled drives. One is a semi-sensored scheme wherein a combination of low cost hall sensors and a digital position estimator gives the position information. In the second scheme, a reduced order observer called Luenbuerger observer has been used to estimate speed and rotor angle. The problem of finding rotor angle at standstill has also been dealt with. This thesis also discusses the difference in simulating a BLDC (Brushless DC) and PMSM machine.
An experimental set-up consisting of MOSFET inverter and TMS320LF2407 DSP based digital controller was developed in the laboratory to implement the control algorithms. Two PMSM machines were procured from a two-wheeler manufacturer to set up the rig. Simulations were done in MATLAB/ Simulink (Off-line) and Xilinx XC3S400 (in real-time) to verify the concepts. Simulation and experimental results are finally compared.
|
5 |
Contribution à l’étude des émissions vibro-acoustiques des machines électriques : cas des machines synchrones à aimants dans un contexte automobile / Study of noise and vibrations of electromagnetic origin in electrical machines : specific case of permanent magnet synchronous machines used in the automotive industryVerez, Guillaume 02 December 2014 (has links)
Dans un contexte automobile électrique et hybride, la part des machines synchrones à aimants permanents s'est accrue exponentiellement. Cette évolution s'accompagne d'exigences en termes d'émissions vibro-acoustiques. En termes de dimensionnement de la chaîne de traction, l'analyse multiphysique du moteur s'avère être un enjeu crucial pour son développement. La nécessité de disposer de codes informatiques de conception possédant des temps de calcul faibles pour une précision maximale se fait ressentir pour l'exploration de solutions potentiellement performantes dans les premières étapes du processus de dimensionnement. A ce titre, les aspects vibratoires et acoustiques sont modélisés analytiquement et par éléments finis dans la présente thèse. Ainsi, au moyen du modèle magnétique, l'analyse magnéto-vibro-acoustique faiblement couplée (résolution itérative des différentes physiques) peut être réalisée.La thèse est découpée en quatre parties. La première expose un état de l’art sur les émissions vibro-acoustiques des machines et notamment la modélisation du bruit d’origine magnétique. Les problématiques de la modélisation sont détaillées. Dans une deuxième partie, les modèles sont largement décrits. Les modèles éléments finis sont validés expérimentalement. Une troisième partie se propose de valider les modèles analytiques par éléments finis, en complexifiant progressivement la géométrie d’une machine à aimants montés en surface à flux radial. Enfin, la dernière partie utilise les modèles éléments finis pour étudier des machines non-conventionnelles comme les machines à commutation de flux et les machines à aimants en surface à flux axial. / The proportion of permanent magnets synchronous motors used for electric and hybrid automotive traction has exponentially increased during the past decade. This evolution comes with ever-demanding low noise and vibrations requirements. Multi-physics analysis of the motor is a decisive issue for the development of the powertrain. For the exploration of potentially efficient motor solutions in first design steps, it is thus a necessity to have at disposal fast and accurate computer codes. In this respect, acoustic and vibratory aspects are modeled using finite element and analytical models in this thesis. As a result, using an electromagnetic model, the weakly-coupled magneto-vibro-acoustic analysis (iterative solving of each physic) can be performed.The thesis is divided into four parts. The first part states the art on machine vibro-acoustic emissions and focuses on noise of magnetic origins modeling. Issues of modeling are detailed. Then, models are described to a great extent in the second part. Finite element models are favorably compared to experimental measures. A third part validates analytical models in comparison to finite element analysis, by gradually complicating the geometry of a surface permanent magnets radial flux machine. Finally, a fourth part uses finite element models to study non-conventional machines such as flux switching radial flux machines and surface permanent magnets axial flux machines.
|
6 |
Conception optimale d'un entraînement électrique pour la chaîne de traction d'un véhicule hybride électrique : Co-conception des machines électriques, des convertisseurs de puissance et du réducteur planétaire / Optimal design of electrical drive for a hybrid electric vehicle powertrain : Co-design of electrical machines, power converters and planetary gearWu, Zhenwei 21 March 2012 (has links)
Une nouvelle chaîne de traction dédiée à un véhicule hybride électrique de poids lourds a été développée dans ces travaux de recherche. A ce stade, la conception et l'optimisation des composants électriques de la chaîne de traction ont été étudiées, notamment les machines synchrones à aimants permanents et les onduleurs de tension associés, ainsi que le train Ravigneaux. En ce qui concerne la conception, un modèle analytique a été créé et qui permet de répondre au cahier des charges simultanément. Les différentes contraintes multiphysiques ont été prises en compte dans le modèle analytique. Ensuite, un modèle numérique via la méthode élément fini a été mise en œuvre. Le modèle numérique nous a permis de valider les performances de la machine électrique. En ce qui concerne l'optimisation, une stratégie de l'optimisation globale a été étudiée. Un exemple d'optimisation a été basé sur un système composé par deux machines électriques et deux onduleurs associés, ainsi que le train Ravigneaux. La comparaison basée sur cet exemple pour l'optimisation locale et globale nous a permis de valider l'avantage de la stratégie de l'optimisation globale. L'expérimentation a été réalisée sur un banc d'essais qui est constitué par la machine prototype et la machine de charge, les deux machines électriques ont été alimentées et pilotées par deux variateurs de fréquence. Les résultats expérimentaux nous ont permis de valider les modèles théoriques. / A new powertrain for a hybrid electric vehicle of heavy duty was developed in this research work. In this case, the design and the optimization of electrical components of powertrain have been investigated involving the permanent magnet synchronous machines, the associated inverters and the Ravigneaux train. Regarding the design, an analytical model was created and that permits simultaneously answering to specification. The various multiphysic constraints have been taken into account in analytical model. And then the numerical model was carried out via finite element method has been implemented. The numerical model allowed us to valid electrical machine performances. Regarding the optimization, a global optimization strategy was investigated. An optimization example was based on a system which was composed of two electrical machines, two associated inverters and the Ravigneaux train; The comparison based on this example between the local optimization and the global optimization, which allowed us to valid the advantage of global optimization strategy. The experimentation has been performed with a test bench involving the prototype machine and the load machine, the two electrical machines were fed and controlled by two frequency drives. The experimental results permit to valid the theoretical models.
|
7 |
Transformação dq não senoidal para máquinas síncronas com imã permanente no rotor / Non-sinusoidal dq transformation for rotor permanent magnet synchronous machinesMonteiro, José Roberto Boffino de Almeida 19 December 2002 (has links)
O presente trabalho apresenta uma transformação dq não senoidal e sua aplicação em máquinas síncronas com ímã permanente na superfície do rotor (MSIP) e forma de onda de FEM não senoidal. O modelo resultante da aplicação dessa transformação permite o controle direto do torque eletromagnético, permitindo reduzir as ondulações do torque produzido nesse tipo de máquina. A redução dessas ondulações em MSIPs não senoidais possibilita que esse tipo de máquina seja empregado em aplicações onde somente MSIPs senoidais, que possuem custo mais elevado, poderiam ser usadas. Simulações e resultados práticos, obtidos pela implementação do sistema de controle vetorial não senoidal desenvolvido, são apresentados no trabalho. Pelos resultados obtidos, pode-se verificar que o método proposto é eficaz na redução das ondulações do torque eletromagnético em MSIPs não senoidais. / This work presents a non-sinusoidal dq transformation and its application in permanent- magnet synchronous machines (PMSM) with a non-sinusoidal back-EMF waveform. The resulting model of the application of such transformation permits direct control of machine electromagnetic torque, which achieves the reduction of torque ripple. The reduction of torque ripple in non-sinusoidal PMSMs makes possible the use of this kind of PMSM instead of sinusoidal PMSMs, which are more expensive. Simulation and practical results, obtained by the implementation of such non-sinusoidal vectorial control system, are shown in this work. Those results show that the method presented is efficacious in the torque ripple reduction in non-sinusoidal PM synchronous machines.
|
8 |
Contribution à l'étude des machines synchrones à aimants permanents en présence de défauts inter-spires : modélisation, détection de défauts inter-spires / Contribution to the Study of Permanent Magnet Synchronous Machines Under Inter-turn Faults Conditions : Modelling, Inter-turn Fault DetectionLeboeuf, Nicolas 11 December 2012 (has links)
Les systèmes électriques embarqués dans l'aéronautique doivent satisfaire à des cahiers des charges de plus en plus exigeants portant sur le poids, les performances et la fiabilité, d'où l'utilisation des Machines Synchrones à Aimants Permanents (MSAP). Vu les contraintes imposées, les prototypes sont parfois assez éloignés d'une MSAP classique. La surveillance en ligne de ces systèmes est alors plus délicate mais représente un enjeu considérable vu l'aspect critique des applications (ailerons d'avion, freinage...) et a pour objectif d'éviter un incident majeur en le détectant puis en basculant sur un système identique redondé. Ce document propose un travail de modélisation de MSAP saine et en présence de défaut inter-spires ayant pour objectif de définir des méthodes de détections de défauts inter-spires en ligne, sans capteurs supplémentaires. Deux approches sont présentées pour modéliser les MSAP en présence de défauts inter-spires et sont comparées à des essais expérimentaux réalisés sur un prototype aéronautique. L'une d'entre elles, reposant sur une approche par Réseaux De Perméances (RDP), permet d'obtenir le meilleur compromis. La partie suivante propose de tester deux approches utilisant un indicateur de défaut basé sur un modèle d'Onduleur-MSAP sain et montre l'intérêt de ce type d'approche comparé à des approches plus classiques. L'ensemble des indicateurs développés est ensuite analysé à l'aide d'un outil utilisant la Reconnaissance de Formes (RDF) / Embedded electric systems in aircraft applications have to satisfy to specifications including weight, performances and reliability leading to the use of Permanent Magnet Synchronous Machines (PMSM). Due to these constraints, prototypes are often different from classical PMSM. Online monitoring of these systems is challenging but is still important regarding safety applications (electro mechanical airfoil, braking?). The main aim is to detect major incidents in order to use redundant systems. This work concerns modeling of PMSM under both healthy and inter-turn fault cases in order to defined online fault detection methods without additional sensors. Two approaches are presented and compared to experimental tests concerning PMSM under inter-turn fault conditions. One of them is based on Permeance Network (PN) modelling. It can be considered to be the best compromise. The next part deals with two fault indicators methods based on healthy models of Inverter and PMSM and shows improvements brought by these approaches compared to classical methods. The whole indicators are analyzed using Pattern Recognition (PR)
|
9 |
Estratégias de acionamento e controle em máquinas CA de ímã permanente com fluxo não senoidal / Control strategies for permanent magnet AC machines with non-sinusoidal fluxMonteiro, José Roberto Boffino de Almeida 29 August 1997 (has links)
O objetivo desse trabalho é o estudo e a análise do desempenho de máquinas brushless com ímã permanente no rotor, com fluxo de entreferro não senoidal. São consideradas máquinas brushless com ímã permanente na superfície do rotor. Três modelos matemáticos são considerados: o modelo por fase de estator, o modelo vetorial e o modelo velocidade-tensão de segunda ordem. Máquinas com diferentes tipos de enrolamento de estator são comparadas, incluindo as máquinas síncronas com ímã permanente no rotor (com a densidade dos enrolamentos distribuída de forma senoidal no estator). Os resultados para o torque eletromagnético das máquinas foram obtidos considerando-se dois tipos de acionamentos em malha aberta: um acionamento de seis pulsos e um acionamento senoidal. Por fim, um método de controle é apresentado para máquinas não senoidais. As ondulações no torque e o desempenho das máquinas não senoidais. As ondulações no torque e o desempenho das máquinas não senoidais, utilizando controle vetorial, são comparados aos das máquinas senoidais. / The aim of this work is to analyse the torque performance of brushless machines with non-sinusoidal distributed magnetic fluxes. The machine type considered is a surface mount permanent magnet brushless machine. Three mathematical models for the machine are considered: the per stator phase, the vectorial and the linear second order speed-voltage models. Machines with different stator windings are compared including the permanent magnet synchronous machines with sinusoidal distributed stator windings. The torque outputs of these machines are obtained considering two kinds of open loop driving systems: one with a six-pulse waveform and other with a sinusoidal waveform. Finally, a vectorial control is proposed for the non-sinusoidal machines. The torque ripple as well the overall performance of non-sinusoidal machines with vectorial control is compared to that of sinusoidal machines.
|
10 |
Ανάλυση, έλεγχος και προσομοίωση συστήματος ανεμογεννήτριας μεταβλητών στροφών με σύγχρονη γεννήτρια μόνιμου μαγνήτηΚωνσταντακόπουλος, Ιωάννης 17 September 2012 (has links)
Στις μέρες μας το ενεργειακό πρόβλημα αποτελεί ένα από τα σπουδαιότερα προβλήματα του πλανήτη, το οποίο μαζί με την ραγδαία κλιματική αλλαγή οδηγούν στην ανάγκη για παραγωγή ηλεκτρικής ενέργειας με όσο πιο οικονομικό αλλά και φιλικό με το περιβάλλον τρόπο. Συνεπώς οι Ανανεώσιμες Πηγές Ενέργειας και κυρίως η αιολική ενέργεια αποκτούν σπουδαίο ρόλο στο στόχο αυτό και αλλάζουν άρδην τόσο τον Ευρωπαϊκό όσο και τον Παγκόσμιο ενεργειακό χάρτη. Στην παρούσα διπλωματική εργασία μελετάμε μια διάταξη ανεμογεννήτριας, η οποία αποτελείται από μια σύγχρονη μηχανή μόνιμου μαγνήτη (PMSG), από έναν μετατροπέα συχνότητας (back-to-back converter) και από ένα R-L φίλτρο στην πλευρά του δικτύου. Επιπλέον, η απουσία μηχανικών εξαρτημάτων στην σύγχρονη μηχανή μόνιμου μαγνήτη (PMSG), όπως δακτυλίων ολισθήσεως και ψηκτρών, την κάνει, ελαφρότερη, με υψηλότερο λόγο ισχύος προς βάρος γεγονός που της προσδίδει μεγαλύτερη αποδοτικότητα και αξιοπιστία. Λόγω των προαναφερθέντων πλεονεκτημάτων, η σύγχρονη μηχανή με μόνιμο μαγνήτη (PMSG) αποτελεί μια ελκυστική λύση για τα αιολικά συστήματα. Σκοπός λοιπόν αυτής της εργασίας είναι να μελετήσουμε το πλήρες σύστημα της ανεμογεννήτριας στο d-q στρεφόμενο σύστημα κάθετων αξόνων μέσω του μετασχηματισμού Park και να εφαρμόσουμε την κατάλληλη μεθοδολογία ελέγχου ούτως ώστε να επιτύχουμε μέγιστη απομάστευση ισχύος από τον άνεμο με ταυτόχρονη ρύθμιση της τάσης της dc διασύνδεσης αλλά υπό μοναδιαίο συντελεστή ισχύος για την πλευρά του δικτύου. Τέλος, προσομοιώνουμε το πλήρες σύστημα με το Simulink του Matlab και στη συνέχεια παρουσιάζουμε τις αποκρίσεις των προσομοιώσεων και εξάγουμε συμπεράσματα. / Nowadays the energy problem is one of the most important global problems, which together with the rapid climate change lead to the need for power generation as more economical and environmentally friendly way. Therefore, the Renewable Energy Sources and especially wind power have a great role in this objective and radically change both the European and the global energy map. In this thesis we consider a wind turbine device, which comprises a permanent magnet synchronous machine (PMSG), a frequency converter (back-to-back converter) and an R-L filter on the grid side. Thus, the absence of mechanical parts in permanent magnet synchronous machine (PMSG), as sliding rings and brushes, to make, lighter, with a higher power to weight ratio which gives greater efficiency and reliability. Due to the above advantages, the permanent magnet synchronous machine (PMSG) is an attractive solution for the wind. Aim of this thesis is to study the complete wind turbine system in the d-q rotating vertical axes system through the Park transformation and to apply the appropriate control methodology in order to achieve maximum energy harvesting from the wind, with a simultaneous control of the dc link voltage under unit power factor for the grid side. Finally, we simulate the complete system with the Matlab Simulink and then we present simulations of the responses and draw conclusions.
|
Page generated in 0.0997 seconds