No description available.

Polarization dependences of optical devices in highly-integrated optical systems become a major problem. To overcome this issue, one can implement polarization diversity scheme to achieve a single polarization on-chip network. One of the essential components in a polarization diversity scheme is the polarization beam splitter (PBS). In this thesis, we will a PBS based on a silicon-on-insulator (SOI) platform with reduced device size and broad operation bandwidth. We use the three-dimensional Finite-Difference Time-Domain (3D-FDTD) method to perform the simulation. First, we use two asymmetric waveguides to design an asymmetric directional coupler with only TE-like mode phase matching condition. We then tape the lower waveguide to keep the TE-polarized light, and split the TE- and TM- polarized light. By utilizing an asymmetrical directional coupler with a tapered waveguide, we have achieved a 7.3

Optical devices based on planar lightwave circuit (PLC) technology have the advantages of small size, high reliability, possibility for large scale production, and potential integration with electronics. These devices are widely employed in optical telecommunications, sensing, data storage, imaging, and signal processing. This thesis focuses on some selected PLC based devices, such as power splitters, demultiplexers, triplexers and polarization beam splitters. First, the basic principle of the waveguides and the simulation methods for PLC devices are discussed. A novel effective index method is introduced to reduce a two-dimensional structure to a one-dimensional one, and can be implemented for arbitrarily shaped waveguides. Numerical methods, such as finite-difference mode solver, beam propagation method, finite-difference time-domain method are introduced to analysis the mode profile of the waveguides, and the propagation properties of light in PLC devices. Multimode interference (MMI) couplers are widely used in many PLCs, such as power splitters, ring lasers, optical switches, and wavelength division multiplexers/demultiplexers. In this work, concepts for improving the self-imaging quality of MMI couplers are analyzed and new designs are proposed. A significant improvement in performance together with compact sizes were obtained with taper sections at the input/output of MMI couplers based on SOI, and deeply etched ridges in MMI couplers based on SiO2. A polarization insensitive dual wavelength demultiplexer based on sandwiched MMI waveguides was presented. Novel devices including triplexers and polarization beam splitters were realized by using photonic crystal (PhC) structures. Two stages of directional couplers based on PhC waveguides are cascaded to form an ultracompact triplexer. The special decoupling property of the PhC waveguide based directional coupler was utilized in the design. A novel polarization beam splitter was realized by combining a MMI coupler and a PhC which works as a polarization sensitive reflector. Finally, fabrication and optical characterization of an ultra-compact directional coupler and PhC structures in InP are presented. In a single etching step, by using the lag-effect in inductively coupled plasma reactive ion etching, a compact directional coupler (55 μm) is demonstrated. Carrier life times in PhC structures etched by chemically assisted ion beam etching were investigated, for emitter and switching applications. / QC 20100909

A novel photonic frequency discriminator has been developed. The discriminator utilizes a Mach Zehnder interferometer-assisted ring resonator to achieve enhanced linearity. A numerical frequency-domain two-tone test is performed to evaluate the unique design of the discriminator, particularly for suppression of the third order intermodulation distortion. The discriminator is switchable between linear-intensity and linear-field regimes by adjusting a phase delay on one arm of the Mach Zehnder interferometer. Through the simulation, the linear<intensity discriminator is shown to be advantageous. The discriminator is an optical ring resonator-Mach Zehnder interferometer synthesized passive filter. The ring resonator is made of Arsenic trisulfide (As2S3) and the bus waveguide is a Titanium<diffused Lithium niobate (LiNbO3) waveguide. This As2S3 ring-on-Ti:LiNbO3 hybrid structure offers electro-optic tunability of the device owing to a strong electro-optic effect of the substrate material. A large optical confinement factor achieved by vertical integration of the As2S3 strip waveguide on a LiNbO3 substrate enables a low loss ring resonator. The Mach Zehnder interferometer is formed by the optical path length difference of the birefringent LiNbO3 substrate instead of a physical Y-branch structure, which makes the fabrication tolerances relaxed. In order for this highly birefringent device to be characterized, each polarization mode must be measured separately. A novel algorithm which can measure the wavelength-swept Jones matrix including its phase response is devised. The efficacy of the algorithm is demonstrated by characterizing a ring resonator. Finally, the fabricated discriminator is fully characterized using the algorithm.

The purpose of this master’s thesis is foremost to provide a simple guide how to build elements of optical metropolitan area network. The basic model consists to sequence of construction, network topology, passive and active parts. The collection contains examples of alternative technology such as Wireless LAN with different frequency. The optical network construction based on optical cable, fibres, splices, trays, adapters, connectors and active parts for example a lot of media convertor models. After that there are demonstrating type of wavelength division multiplexer used in metropolitan area network – passive planar PCL splitter. One of the passive planar splitter are used to increase optical fibre channel. At the end of the collection a simplified examples of used measurements – optical time domain reflectometry and optical fibre transmission. Contains standard protocols or reflectogram. The conclusion of this thesis summarizes costs of FTTb (Fibre To The Building) model of optical metropolitan area network in Czech republic and future contribution for society.