Thesis (Ph. D.)--University of Minnesota, 1924. / Biographical sketch. "Literature cited": leaves 85-88.

abstract: ABSTRACT This study explored the functions of dialogue in emerging adults' moral turning points. Through purposive sampling, the researcher interviewed 10 emerging adults between 25 and 30 years old about experiences of turning point conversations during the years of 18 and 25. This study employed constant comparative and grounded theory methodologies to analyze messages reported in memorable conversations during this period. Results indicated that dialogue functioned to educate, disturb, and maintain emerging adults' moral perception during this period of moral reorientation. Subcategories under each included dialogue that functioned to explain, invite, warn, direct or instruct, challenge, persuade, agitate, expose, inquire, legitimize, co-reflect, redefine, and affirm or reinforce. This report cites passages from interview data to highlight how dialogic themes informed or shaped changes in moral perception. In each participant's self-reported turning point conversations there was an admixture of dialogic functions at work. Notably, participants' experience of moral turning (degree and trajectory) varied despite there being similarity in intended functions of dialogue. / Dissertation/Thesis / IRB Approval Form / M.A. Communication Studies 2010

No description available.

Ce manuscrit est dédié à la détection et la caractérisation de points d'intérêt dans les maillages. Nous montrons tout d'abord les limitations de la mesure de courbure sur des contours francs, mesure habituellement utilisée dans le domaine de l'analyse de maillages. Nous présentons ensuite une généralisation de l'opérateur SUSAN pour les maillages, nommé SUSAN-3D. La mesure de saillance proposée quantifie les variations locales de la surface et classe directement les points analysés en cinq catégories : saillant, crête, plat, vallée et creux. Les maillages considérés sont à variété uniforme avec ou sans bords et peuvent être réguliers ou irréguliers, denses ou non et bruités ou non. Nous étudions ensuite les performances de SUSAN-3D en les comparant à celles de deux opérateurs de courbure : l'opérateur de Meyer et l'opérateur de Stokely. Deux méthodes de comparaison des mesures de saillance et courbure sont proposées et utilisées sur deux types d’objets : des sphères et des cubes. Les sphères permettent l'étude de la précision sur des surfaces différentiables et les cubes sur deux types de contours non-différentiables : les arêtes et les coins. Nous montrons au travers de ces études les avantages de notre méthode qui sont une forte répétabilité de la mesure, une faible sensibilité au bruit et la capacité d'analyser les surfaces peu denses. Enfin, nous présentons une extension multi-échelle et une automatisation de la détermination des échelles d'analyse qui font de SUSAN-3D un opérateur générique et autonome d’analyse et de caractérisation pour les maillages / This manuscript is dedicated to the detection and caracterization of interest points for 3D meshes. First of all, we show the limitations of the curvature measure on sharp edges, the measure usually used for the analysis of meshes. Then, we present a generalization of the SUSAN operator for meshes, named SUSAN-3D. The saliency measure proposed quantify the local variation of the surface and classify directly the analysed vertices in five classes: salient, crest, flat, valley and cavity. The meshes under consideration are manifolds and can be closed or non-closed, regulars or irregulars, dense or not and noised or not. The accuracy of the SUSAN-3D operator is compared to two curvature operators: the Meyer's operator and the Stokely's operator. Two comparison methods of saliency and curvature measures are described and used on two types of objects: spheres and cubes. The spheres allow the study of the accuracy for differentiable surfaces and the cubes for two types of sharp edges: crests and corners. Through these studies, we show the benefits of our method that are a strong repeatability of the measure, high robustness to noise and capacity to analyse non dense meshes. Finally, we present a multi-scale scheme and automation of the determination of the analysis scales that allow SUSAN-3D to be a general and autonomous operator for the analysis and caracterization of meshes

M.Tech. (Chiropractic) / Purpose: This study was undertaken in order to demonstrate the effects of static magnetic field therapy on acupuncture points in the treatment of those suffering from mechanical neck pain. Isolated spinal manipulative therapy of the cervical spine was compared to spinal manipulative therapy of the cervical spine in conjunction with magnetic field therapy on acupuncture points using both objective and subjective measurements. Before the execution of this study, it was hypothesised that both treatment protocols would be effective in the treatment of mechanical neck pain, although the combined therapy would be more effective. Method: Patients were recruited by way of advertisements placed in and around the University of Johannesburg, Doornfontein campus and their health clinic. Thirty patients with mechanical neck pain were recruited and randomly divided into two groups. Group one received manipulation to the affected joints of the cervical spine and group two received manipulation to the cervical spine combined with magnetic field therapy on acupuncture points. Procedure: Each patient in each group attended six treatment sessions; three in the first week and three in the second week. The Vernon Mior Neck Pain and Disability Index and the Numerical Pain Rating Scale (subjective measurements) were completed by each patient and the Cervical Range of Motion instrument (objective measurements) was used to collect readings from each patient in both the control and experimental groups, subjective and objective measurements were taken before treatment one, three and six. Specific treatment protocols were then adhered to. Results: The results indicated that both treatment protocols were effective in reducing mechanical neck pain although not one group was more effective than the other. Both groups improved subjectively and objectively as they had cervical spinal manipulation directed at joint dysfunction. Conclusion: The experimental group who received spinal manipulative therapy to correct joint dysfunction in conjunction with magnetic field therapy on acupuncture points was not more effective than the control group who received spinal manipulation only, in the treatment of mechanical neck pain.

No description available.

L'interaction tactile multi-points co-localisée procure un fort sentiment de contrôle direct mais introduit des problèmes d'occultation, de précision et de fatigue. Ces problèmes sont exacerbés sur les écrans de grandes dimensions, qui supportent la manipulation de grandes quantités de données, souvent en collaboration avec d'autres utilisateurs. Pour résoudre ces problèmes, cette thèse s'intéresse à l'introduction d'indirections dans l'interaction multi-points sur grands écrans. Nos travaux portent sur l'étude des facteurs qui influencent la précision dans les tâches de sélection sans prévisualisation du contact. Les résultats de deux expériences contrôlées ont ainsi permis d'estimer la précision attendue selon les caractéristiques des périphériques d'entrée et de sortie et des conditions d'utilisation. Sur la base de ces connaissances, nos travaux portent également sur le développement de nouvelles techniques d'interaction pour écrans de grandes dimensions. Nous avons d'abord proposé une technique permettant d'interagir indirectement avec une tablette tactile, en introduisant la gestion de plusieurs curseurs contrôlés relativement. Nous avons ensuite conçu une interaction reposant sur la création de plusieurs périphériques virtuels qui supportent une interaction à la fois directe et indirecte tout en permettant de réorganiser les éléments d'une interface. Parallèlement à cela, nous avons transformé un écran mural de 6*2,4m en une surface tactile multi-points afin de pouvoir tester les techniques et scénarios discutés dans ces travaux. / Co-localized multi-touch interaction affords a high feeling of directness but introduces problems of occlusion, precision and fatigue. These problems are even more acute with large displays, supporting the interaction with large data sets, often in collaboration with other users. To solve these problems this thesis focuses on the introduction of indirections in multi-touch interaction on large displays. We first study factors impacting accuracy in selection tasks without contact preview. Results of two controlled experiments allowed to estimate the expected accuracy depending on input and output device characteristics and input conditions. Based on this knowledge, we developed new interaction techniques for large displays. We first introduced a technique to interact indirectly using a tactile tablet by introducing the control of several cursors using a relative mapping. Then we proposed an interaction technique based on the creation of multiple soft-devices that supports both direct and indirect interaction and allows to re-arrange the interface of legacy applications. In order to design, test and evaluate these techniques, we turned a back projected wall display (6*2,4m) into an interactive multi-touch surface.

研究背景：肩痛是临床的常见症状，常因不正确姿势、受凉、外伤、运动劳损等引发，多被诊断为局关节周围炎、属部的肌臆炎等’带来的疼痛和肢体活动障碍都严重影响正常生活。针灸治疗盾痛效果显著’传统中医在眉痛的诊疗中已有详尽论边，而近年西方医学提出的激痛点疗法，在治疗痛症上也有明确的疗效。总结局痛的激痛点针刺取穴方案，探讨其与传统针灸的失系’对发展当代针灸有十分重要的理论意义和临床价值。研究目的：初步总结盾痛的激痛点针刺取穴方案，探讨激痛点和传统针灸的相关性, 为临床提供新思路。研究方法：文献研究。结论：眉痛的激痛点针刺取穴方案为：盾前痛取胸大肌锁骨部、胸小肌、肱二头肌、喙肱肌、背阔肌、冈下肌、前三角肌、前斜角肌、中斜角肌激痛点；属后痛取大圆肌、小圆肌、肩胛下肌、肱三头肌长头第一、下斜方肌第三、后三角肌激痛点；肩外侧疼痛取中三角肌、冈上肌激痛点。此法优势在于理论系统与诊疗过程明确、操作规范、疗效显著，是属痛的治疗的新思路。对比发现，激痛点理论与经筋理论相似。激痛点针刺取穴与中医整体辨证论治的结合, 势必有助提高临床疗效，值得深入探索。關键字：肩痛激痛点针刺取穴文献研究

We give algorithms to compute Coleman integrals on superelliptic curves over unramified extensions of the p-adics, and apply these via Chabauty methods to determine the set of rational points on such curves. We also determine the solution to an explicit instance of the Shafarevich conjecture by finding all elliptic curves with good reduction outside of the first 6 primes, subject to a heuristic. We use a combination of non-abelian Chabauty and the Mordell--Weil sieve to determine the rational points on several quotient modular curves, and therefore classify pairs of elliptic curves over the rationals with 67-, 73-, and 107-isogenies. We give methods to explicitly compute Coleman integrals on modular curves using a canonical lift of Frobenius and canonical local coordinates in each residue disk, and discuss the problem of computing the Weil pairing in finite rings.

The composition of volcanic products can provide critical information about the source and the conditions of melting. This information is used to highlight differences in melting environments from volcanic regions around the globe. Volcanic lavas and other products from the Rungwe Volcanic Province, in southwest Tanzania (9.13S,33.67E), were collected and studied to test a number of lingering questions about the role of magmatism in a continental rift tectonic environment. The Rungwe Volcanic Province is the only region in this portion of the East African Rift (EAR) system with apparent magmatism. Is magmatism here the product of rifting, like melts generated in oceanic rift tectonic environments (Mid-ocean ridge basalts, MORB), or is melting here facilitated by the upwelling asthenospheric mantle, like melts generated at hotspots or plumes (oceanic intraplate basalts, OIB)? To address this, contributions from the continental lithosphere must also be identified and addressed. Each chapter of this dissertation approaches this fundamental question using different aspects of the comprehensive chemical and isotopic dataset from this study. The second chapter outlines a novel thermobarometer that is then applied to Rungwe samples to estimate the temperatures and depths at which the melts equilibrated. Laboratory melt experiments of garnet peridotite, some containing CO2, create melt with major element characteristics applicable for pressure and temperature estimation of Rungwe samples. The parameterization of Al2O3 and MgO from the experimental melt compositions provides a thermobarometer with a temperature range of 1100-1500C (16C, 1), and a pressure range of 2-5 GPa (0.2 GPa, 1). The maximum potential temperature reached for Rungwe samples is 1372C. Potential temperatures at Rungwe overlap with the ambient asthenospheric mantle, as sampled by the global range of MORB. Potential temperature range for Rungwe is too high for melts to have a derivation from the continental lithosphere, and too low for melts to be derived from the thermally-driven plume. The pressures of melt equilibration for Rungwe span a range from GPa, when converted to depths is 55-101 km. Depth estimates can be compared to the estimated depths of the lithosphere-asthenosphere boundary (LAB) from seismic tomography models. Rungwe melts appear to be derived from the depths at or below the LAB, supporting their derivation from an asthenospheric source. Under the same parameters, other volcanic regions from the Western Branch of the EAR give similar results, while maximum potential temperatures from the Eastern Branch exceed estimates from the ambient asthenospheric mantle, providing more support for a thermally-derived mantle plume there. The third chapter provides a timeline of volcanism at Rungwe including ages from Ar-Ar geochronology performed on samples from this study, as well as dates of two precursor carbonatite bodies in the vicinity of the volcanic province. Most of the Rungwe Volcanic Province was emplaced between present-9Ma, with emerging evidence for eruptions between 9Ma and ~25Ma. A proposed broadening of the age range of each volcanic stage definition helps to include eruptions prior to 9Ma, and encompass eruptions shown to have occurred between the original volcanic stage age ranges. Two carbonatite bodies in the northwest edge of the volcanic province date to 169.0 0.6 Ma and 154.4 0.9 Ma, and show no evidence of Cenozoic reactivation. The emplacement ages of the majority of Rungwe samples coincide with accelerated rifting and basin formation present-9Ma. The updated timeline of Rungwe volcanism suggests that eruptions prior to 9Ma are still tied to tectonic extension, based on comparison to thermochronology cooling ages from the major border faults. The fourth chapter characterizes and provides context about the chemical and isotopic composition of the mantle source of Rungwe melting. Isotopic Sr-Nd-Pb-Hf, as well as major and trace elemental compositions provide a fingerprint for Rungwe melts in which to compare to the range of global OIB and to other EAR melts. The majority of Rungwe melts possess isotopic traits that are consistent with an asthenospheric plume-derived source. Many isotopic and trace element ratio characteristics identified are not shared with any identified OIB-source volcanic region, but are present in other EAR volcanoes. These indicators suggest that some Rungwe melts, together with some EAR volcanoes, share a common source characteristic or melt process that the global OIB does not sample or experience. Homogeneity of plume source or continental lithosphere over the large geographic distances between volcanic provinces in the EAR are not expected. No OIB emplaced on oceanic crust must traverse Archaean or Proterozoic subcontinental lithosphere or crust. The influence of melt interaction with these elements are explored in detail as the main cause of differences between OIB and Rungwe compositions. Metasomatic phases accumulated by melt interaction at the LAB interface over eons create compositions that can influence low-volume melts that traverse them. It appears that no Rungwe melt evaded this overprint from the subcontinental lithospheric mantle, despite large-scale preservation of the plume-derived melt origin.