La poly(ADP-ribosyl)ation est une modification post-traductionnelle qui est stimulée en réponse à des dommages à l'ADN. Les poly(ADP-ribose) polymerases (PARPs) synthétisent des polymères branchés de poly(ADP-ribose) (PAR) qui peuvent se lier de manière covalente et non-covalente à des protéines jouant ainsi un rôle dans des processus tels que la progression du cycle cellulaire, la réparation de l'ADN, la stabilité de l'intégrité génomique et l'apoptose. Le cycle de dégradation du PAR induit aussi une variation des réserves en nucleotides comme le NAD+, l'ATP et l'AMP, influençant les voies énergétiques des cellules. Les techniques de « Matrix Assisted Laser Desorption Ionisation » (MALDI) et de quantification de nucleotides par colorimétrie, fluorométrie et HPLC ont été utilisées pour déterminer de nouveaux partenaires protéiques interagissant avec le polymère d'ADPr, par l'entremise d'interaction directe, covalente et non-covalente, ou par l'entremise d'interaction indirecte, via le cycle de synthèse/dégradation du PAR qui induit d'importants changements métaboliques cellulaires.

Statistical copolymers of acrylonitrile (AN) and methyl acrylate (MA) were successfully prepared and characterized using reversible addition-fragmentation chain transfer (RAFT) copolymerization. A typical copolymer was charged with 15 wt. % MA content. This thesis describes a systematic variation of the RAFT copolymerization variables to optimize this system. In particular, the effects of chain transfer agent, initiator, temperature, and solvent on the copolymer properties were studied. / Master of Science

Polylactide-siloxane triblock copolymers with pendent carboxylic acid functional groups have been designed and synthesized for study as magnetite nanoparticle dispersion stabilizers. Magnetic nanoparticles are of interest in a variety of biomedical applications, including magnetic field-directed drug delivery and magnetic cell separations. Small magnetite nanoparticles are desirable due to their established biocompatibility and superparamagnetic (lack of magnetic hysteresis) behavior. For in-vivo applications it is important that the magnetic material be coated with biocompatible organic materials to afford dispersion characteristics or to further modify the surfaces of the complexes with biospecific moieties. The synthesis of the triblock copolymers is comprised of three reactions. Difunctional, controlled molecular weight polymethylvinylsiloxane oligomers with either aminopropyl or hydroxybutyl endgroups were prepared in ring-opening redistribution reactions. These oligomers were utilized as macroinitiators for ring-opening L-lactide to provide triblock materials with polymethylvinylsiloxane central blocks and poly(L-lactide) endblocks. The molecular weights of the poly(L-lactide) endblocks were controlled by the mass of L-lactide relative to the moles of macroinitiator. The vinyl groups on the polysiloxane center block were further functionalized with carboxylic acid groups by adding mercaptoacetic acid across the pendent double bonds in an ene-thiol free radical reaction. The carboxylic acid functional siloxane central block was designed to bind to the surfaces of magnetite nanoparticles, while the poly(L-lactide)s served as tailblocks to provide dispersion stabilization in solvents for the poly(L-lactide). The copolymers were complexed with magnetite nanoparticles by electrostatic adsorption of the carboxylates onto the iron oxide surfaces and these complexes were dispersible in dichloromethane. The poly(L-lactide) tailblocks extended into the dichloromethane and provided steric repulsion between the magnetite-polymer complexes. / Master of Science

Linear thermoplastic polyesters are commonly used in high volume applications such as food containers, films and textile fibers. The physical and mechanical properties of these materials are well documented and are a function of chemical structure and morphology (e.g. semi-crystalline, amorphous, etc.). Polyesters, as are many organic polymers, are quite flammable. Polydimethylsiloxane homopolymer exhibits low mechanical strength and, even at high molecular weight, exists as a viscous fluid rubbery gum due to its low glass transition temperature of approximately -123°C. However, one of the many attractive properties of this polymer is its relatively low flammability and if properly designed, organic "sand-like" silicates are produced in oxidizing atmospheres at elevated temperatures (e.g. 500-700°C). This thesis discusses the synthesis and characterization of novel, high molecular weight cycloaliphatic and aromatic polyester/ poly(dimethylsiloxane) segmented copolymers. The cycloaliphatic copolymers were synthesized via a melt process using a high trans content 1,4 dimethylcyclohexanedicarboxylate, and 1,4 butanediol or cyclohexanedimethanol, while the partially aromatic systems were synthesized using dimethyl terephthalate and butanediol. Primary and secondary aminopropyl terminated poly(dimethylsiloxane) oligomers of controlled molecular weight were endcapped with excess diester to form an amide linked diester terminated oligomer. The latter was then incorporated into the copolymer via melt transesterification to afford a multiphase segmented copolymer. Selected compositions showed enhanced ductility and hydrophobic surface modification. The polysiloxane segment was effeciently incorporated into the copolymers and was unaffected by the transesterification catalyst under typical reaction conditions. The homopolymers and copolymers were characterized by solution, thermal, and mechanical, and surface techniques. The segmented copolymers were demonstrated to be microphase separated as determined by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and transmission electron microscopy. The surface of the copolymers was enriched with the polysiloxane segment as evidenced by contact angle analysis. Thermal gravimetric analysis of the segmented copolymers containing identical amounts of PDMS, but varying in the primary or secondary nature of their amide linkages, exhibited quantitatively identical char yields and weight loss behavior. The segmented copolymers exhibited char yields in air superior to those of their respective homopolymers. Additionally, aromatic poly(tetramethyleneoxide) (PTMO) based polyether/polyester segmented copolymers were modified with poly(dimethylsiloxane). DMA revealed an apparent shift (higher Tg) of the PTMO segment reflecting an increase in phase mixing with the "hard" polyester segment, possibly induced by the hydrophobic PDMS phase. / Master of Science

Poly(ethylene terephthalate) (PETE) packaging is becoming an increasingly popular choice of packaging material for milk, but has the disadvantage of releasing odorous acetaldehyde into food matrices. Sensory detection group thresholds for acetaldehyde in whole, low fat and nonfat unflavored milks were 3939, 4020, and 4040 ppb respectively with no significant difference due to fat level. Chocolate flavored milk and spring water showed detection thresholds levels for acetaldehyde of 10048 and 167 ppb respectively. This information assisted in determining if acetaldehyde migration from the package to the product would influence the flavor of the product. Whole milk was packaged in glass, high density polyethylene (HDPE), amber PETE, clear PETE, and clear PETE with UV light block and was exposed to fluorescent light of 1100-1300 lux (100-120 FC) at 4oC for 18 days. Sensory and chemical analysis and was done on milk from all containers over a period of 18 days. Emphasis was on oxidation, acetaldehyde and lacks freshness off-flavors and byproducts. All volatile flavor compounds studied (acetaldehyde, pentanal, dimethyl disulfide, and hexanal) were increased in light-exposed milk samples. Amber PETE showed the least amount of oxidation off-flavor, while clear PETE with UV block showed significantly less oxidation off-flavor than glass, clear PETE or HDPE on day 7 and 18. Acetaldehyde was not detected by sensory analysis in either light-exposed or light-protected samples. Chemical analysis showed relative acetaldehyde levels in glass (2220 ppb), HDPE (1265 ppb), amber PETE (3397 ppb), clear PETE (2930 ppb), and clear PETE with UV light block (1754 ppb) were all below concentrations found for human flavor threshold. / Master of Science

Poly(dimethylsiloxane-b-methylvinylsiloxane) (PDMS-b-PMVS) diblock copolymers were synthesized via anionic living polymerization with controlled molecular weights and narrow molecular weight distributions. Targeted molecular weights agreed well with experimental values determined by 1H NMR, 29Si NMR, and GPC. Morphologies were investigated by DSC to analyze glass transition temperatures. Only one Tg was observed for each PDMS-b-PMVS block copolymer suggesting that the blocks were miscible in bulk. Tg's ranged from approximately -126 to -128 °C and were between the Tg's of the PDMS (-123 °C) and PMVS (-137 °C) homopolymers. The PMVS blocks were functionalized with trimethoxysilethyl or triethoxysilethyl pendent groups via hydrosilations to yield poly(dimethylsiloxane-b-[poly(methylvinyl)-co-(methyl-(2-trimethoxysilethyl)siloxane)] (PDMS-b-[PMVS-co-PMTMS]) or poly(dimethylsiloxane-b-[poly(methylvinyl)-co-(methyl-(2-triethoxysilethyl)siloxane)] (PDMS-b-[PMVS-co-PMTES]) copolymers, respectively. The PMVS blocks were either derivatized with the functional groups or half of the repeat units were functionalized. The fully hydrosilated materials were diblock copolymers, and the materials that were 50% hydrosilated had a random sequence of methylvinylsiloxy units and methyl-(trialkoxysilethyl)siloxy units. The PDMS-b-[PMVS-co-PMTES] block copolymers had Tg's ranging from -124 to -126 °C and only one Tg was observed. Surface tension measurements suggested that PDMS-b-[PMVS-co-PMTES] copolymers formed aggregates in toluene. Stable suspensions of superparamagnetic cobalt nanoparticles were prepared in toluene in the presence of PDMS-b-[PMVS-co-PMTMS] or PDMS-b-[PMVS-co-PMTES] copolymers via thermolysis of Co2(CO)8. It is hypothesized that the block copolymers functioned as micellar templates for the cobalt nanoparticles. TEM micrographs showed non-aggregated cobalt nanoparticles coated with copolymers that had mean particle diameters ranging from ≥10-15 nm. Specific saturation magnetizations of these cobalt-copolymer complexes ranged from 90-110 emu g-1 Co, comparable to literature values for this particle size. / Master of Science

Yes / Interpolymer complex formation of poly(acrylic acid) with other macromolecules can occur via several mechanisms that vary depending on the pH. At low pH the protonated acid functional group can form bonds with both donor and acceptor moieties, resulting in desolvated structures consisting of two polymers. Complexes were formed in dilute solutions of PAA, functionalised with acenaphthylene, with a range of other polymers including: poly(NIPAM); poly(ethylene oxide) (PEO); poly(dimethylacrylamide) (PDMA); poly(diethyl acrylamide) (PDEAM) poly(vinyl alcohol) (PVA) and poly(vinyl pyrolidinone) (PVP). Fluorescence anisotropy was used to demonstrate complex formation in each case by monitoring the reductions in segmental motion of the chain as the complexes formed. Considerations of the molecular structures of the complexing moieties suggest that solvation energies and pKas play an important role in complex formation.

Les dommages directs induits à l'ADN par les radiations ultraviolettes (UV) sont éliminés grâce à la réparation par excision de nucleotides (NER). La poly(ADP-ribose) polymerase-1 (PARP-1) est une enzyme impliquée dans différentes voies de réparation de l'ADN. Notre laboratoire a montré que la PARP-1 était activée par les dommages directs dus aux UV et que son absence retarde significativement la réparation de ces dommages dans un gène rapporteur viral. Le but de ce projet était de déterminer si la PARP-1 affectait le NER de l'ADN génomique des cellules eucaryotes. Nous avons observé un délai dans la réparation des dommages directs à l'ADN causés par les UV dans les cellules eucaryotes n'exprimant pas la PARP-1. De plus, la PARP-1 immunoprécipite in vivo avec des protéines impliquées dans la phase de reconnaissance de ces dommages. Nos résultats montrent donc que la PARP-1 joue aussi un rôle dans le NER.

Thesis (MSc (Chemistry and Polymer Science))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: In papermaking, fillers and additives are used to enhance paper properties. In this study spherical modified poly(vinyl alcohol) (PVA) particles were prepared for use as fillers. In order to determine the mechanism of adhesion of additives to cellulose (paper) fibres, these particles were modified to have surface functionality, with cationic and anionic surface charges, similar to charged polyelectrolyte additives. Typically, retention aids used to improve the fibre–fibre and fibre–filler bonding are able to conform to the surface of the fibres and fillers. Oppositely charged components show strong affinity for each other, e.g. cationic polyelectrolyte groups adhere to anionic surface charges on the fibres. The spherical PVA particles were prepared by the saponification of spherical poly(vinyl pivalate) (PVPi) precursor particles. These PVPi particles, prepared via suspension polymerisation, were cross-linked with a divinyl ether comonomer. The vinyl pivalate (VPi) suspension polymerisation was successfully carried out and afforded relatively uniformly distributed PVPi particles, with diameters of 0.5–10 mm. The cross-linked PVPi particles were then saponified in tetrahydrofuran (THF) as swelling solvent, to afford PVA with various degrees of saponification (DS). The spherical shape was lost and fibrous material was obtained when uncross-linked PVPi particles were saponified. Cross-linking the spherical PVPi particles (PVA precursor) proved innovative, and essential in maintaining the spherical form during saponification to PVA/PVPi. By varying the saponification time periods, various DS were obtained, as characterised by solid state NMR spectroscopy. Surface modification of the PVA/PVPi particles was carried out with cationic and anionic groups via the Williamson ether synthesis. Ionic modification of these rigid spherical PVA/PVPi particles was carried out in order to study their adherence to cellulose fibres, compared to the adherence of similarly modified starches with cellulose fibres. Fluorescent labelling of the different modified particles was carried out using two complimentary coloured fluorescent markers. Fluorescence imaging and scanning electron microscopy (SEM) enabled the observation of particle– fibre and particle–particle interaction. Results indicated that the negative groups are sparse on the cellulose fibres, and therefore particles with low functionality but which are able change shape and conform and adhere to the surface of the cellulose fibres are required for effective adhesion. These modified spherical PVA/PVPi particles are unique as they mirror the chemistry of functionalised starch and cellulose particles, yet maintain their shape and have a fixed size, measurable by SEM and transmission electron microscopy (TEM). Field-flow fractionation was also used to characterise and measure these relatively large cross-linked and fixed diameter particles. / AFRIKAANSE OPSOMMING: In papierproduksie word vulstowwe en bymiddels gebruik om die eienskappe van papier te verbeter. In hierdie studie is sferiese poli(vinielalkohol) (PVA) partikels berei vir gebruik as vulstowwe. Om ten einde die meganisme van die bymiddelklewing aan die sellulose vesels (papier) te bepaal, is die oppervlakke van hierdie partikels gewysig met kationiese of anioniese groepe, om 'n oppervlak soortgelyk aan dié van funksionele poliëlektrolietbymiddels te verskaf. Die retensiemiddels wat gebruik word om die vesel–vesel en vesel–vulstof binding te verbeter is tipies in staat om te konformeer aan die oppervlak van die vesels en vulstowwe. Teenoorgesteldgelaaide komponente toon 'n sterk affiniteit vir mekaar, bv. kationiese poliëlektrolietgroepe is vasklewend aan die anioniesgelaaide oppervlakke van die vesel. Die sferiese PVA partikels is berei deur die verseping van sferiese poli(vinielpivalaat) (PVPi) partikels. Hierdie voorloper PVPi partikels, berei deur suspensiepolimerisasie, is gekruisbind met 'n divinieleter ko-monomeer. Die vinielpivalaat (VPi) suspensiepolimerisasie is suksesvol uitgevoer en relatief eenvormig verspreide sferiese PVPi partikels is berei, met deursnitte tussen 0.5–10 mm. Die gekruisbinde PVPi partikels is daarna gesaponifiseer in tetrahidrofuraan (THF) as oplosmiddel, om PVA met verskillende grade van verseping (DS) te berei. Die sferiese vorm raak verlore en veselagtige materiaal is verkry wanneer PVPi partikels met geen kruisbinding verseep is. Kruisbinding van die sferiese PVPi partikels (PVA voorloper) is voordelig en noodsaaklik om die sferiese vorm tydens die verseping tot PVA/PVPi te behou. Deur die tydsduur van verseping te verander, is verskeie grade van verseping verkry en bevestig deur vaste toestand KMR spektroskopie. Oppervlakwysiging van die PVA/PVPi partikels, om kationiese en anioniese groepe aan te heg, is uitgevoer via die Williamson etersintese. Ioniese wysiging van hierdie stram, sferiese PVA/PVPi partikels is uitgevoer om ten einde hul klewing met sellulose vesels te bestudeer en te vergelyk met die klewing van soortgelyk gewysigde stysels. Fluoressensie merking van die verskillende gewysigde partikels is uitgevoer met behulp van twee komplimentêre gekleurde fluoressensie merkers. Fluoressensie beeldvorming en SEM verskaf die waarneming van partikel–vesel en partikel–partikel interaksie. Die resultate dui daarop dat die negatiewe groepe van die sellulose vesels skaars is, en daarom is partikels met ‘n lae funksionaliteit, maar wat in staat is om van vorm te verander, aan te pas en te konformeer aan die oppervlak van die sellulose vesels, nodig vir effektiewe adhesie. Hierdie gewysigde sferiese PVA/PVPi partikels is uniek aangesien hulle die chemie van gewysigde stysel en sellulose partikels naboots, maar steeds hul vorm behou met 'n vaste grootte; meetbaar deur SEM en TEM. Veld-vloei-fraksionering is ook gebruik vir die karakterisering van hierdie relatief groot, stram, gekruisbinde partikels met bepaalde deursneë.

The relaxation characteristics of rubbery poly(ethylene oxide) [PEO] networks have been investigated as a function of network composition and architecture via dynamic mechanical analysis and broadband dielectric spectroscopy. A series of model networks were prepared via UV photopolymerization using poly(ethylene glycol) diacrylate [PEGDA] as crosslinker: variations in crosslink density were achieved either by the introduction of water in the prepolymerization reaction mixture, or by the inclusion of mono-functional acrylate such as poly(ethylene glycol) methyl ether acrylate [PEGMEA] or poly(ethylene glycol) acrylate [PEGA]. Copolymerization with mono-functional acrylate led to the insertion of flexible branches along the network backbone, and the corresponding glass-rubber relaxation properties of the copolymers (i.e., Tg, relaxation breadth, fragility) were a sensitive function of network architecture and corresponding fractional free volume. Relatively subtle variations in network structure led to significant differences in relaxation characteristics, and a systematic series of studies was undertaken to examine the influence of branch length, branch end-group, and crosslinker flexibility on viscoelastic response. Dielectric spectroscopy was especially useful for the elucidation of localized, sub-glass relaxations in the polymer networks: the imposition of local constraint in the vicinity of the crosslink junctions led to the detection of a distinctive fast relaxation process in the networks that was similar to a comparable sub-glass relaxation observed in crystalline PEO and in the confined regions of PEO nanocomposites. Gas permeation studies on the model PEGDA networks confirmed their utility as highly-permeable, reverse-selective membrane materials, and strategic control of the network architecture could be used to optimize gas separation performance. Dynamic mechanical and dielectric measurements have also been performed on a semicrystalline polyester, poly(trimethylene terephthalate) [PTT], in order to assess the influence of processing history on the resultant morphology and corresponding viscoelastic relaxation characteristics. Studies on both quenched and annealed PTT revealed the presence of a substantial fraction of rigid amorphous phase (RAP) material in the crystalline samples: dielectric measurements showed a strong increase in relaxation intensity above the glass transition indicating a progressive mobilization of the rigid amorphous phase with increasing temperature prior to crystalline melting.