Tradable permits are currently among the most frequently used market-based instruments of environmental protection. The aim of my work is this tool to explore and then implement the water management in the Czech Republic. I'm going to try to answer the fundamental question is whether a tool that can be in our legal environment to apply to the taking of surface water for industrial use? This method of solution is used, especially abroad, especially in the U.S. and Australia. I'm going to use the literature and resources in this particular part of the world. In my work I rely on both scientific literature and articles written on this subject and obtained from the primary sources of research systems in other countries. The analysis of the Czech environment, the focus on water authorities and companies to individual basins, which are according to our laws the central government in this matter.

The topic of the thesis is determination of concentration of dissolved solids in water and seasonal changes in surface water chemistry for specific affluents of Orlík water reservoir. Water samples were collected on regular basis and analysed in a laboratory during one season (November 2014 - November 2015). The thesis is focused on monitoring of changes in phosphate and nitrate concentrations, in particular. The results of analysis indicate that measured concentrations of substances at monitored locations reflect generally measured data within the region. Concentrations of NO3-N peak in winter to early spring seasons, therefore seasonal changes do occur; differences between locations have not been proven statistically. As for the parameter PO4-P within locations downstream pond systems no significant statistic differences were identified. Values of PO4-P concentration are not primarily associated with agricultural activities but rather with local sources existing within the catch basin. It has been concluded from testing water quality upstream and downstream fish ponds that pond management had no impact on quality of water within the monitored locations in 2015; respectively no additional phosphor and nitrogen load was imposed on Orlík water reservoir

Title: Muscle activity analysis during the violoncello play Objectives: This thesis focuses on analysing and comparing specific back muscles of a bowing violoncellist. The findings can help understanding pathologic mechanisms and back pain caused by violoncello playing. It may be useful in choosing suitable preventive compensatory exercise as well and for future research. Eventually, the analysis could be applied in playing ergonomics and designing a proper seat. The thesis also aims on evaluating suitability of the chosen measuring method in this branch. Methods: The theoretical part reviews contemporary knowledge about musculoskeletal system disorders linked with violoncello playing. The practical part aims on evaluating data obtained from 3D kinematic analysis and surface EMG of specific back muscles of professional violoncello player during playing. Several conditions are assessed. Results: The experiment has shown that when playing a violoncello there is an asymmetric loading of the back muscles. Loading of specific muscles has is affected by way of bowing, string location and the seat. The experiment was done on a single proband, so these conclusions may not be generally valid. Keywords: violoncello playing, musicians, surface electromyography, 3d kinematic analysis, violoncellists' diseases,...

The aim of this diploma thesis was a statistical evaluation of the impact of farming methods and the land cover on hydrochemical parameters of surface waters drainage patterns in Novohradské mountains and identify the possible impact of agriculture on the valuesof these parameters. The area for the evaluation is consist of lower and upper parts of the basin of Pasecký, Bedřichovský and Váčkový stream. Sampling sites include agriculturally cultivated land, but also forest ecosystems. The work is mainly focused on the following parameters: conductivity, nitrate nitrogen (N-NO3-), suspended solids (NL105) and phosphate phosphorus (P-PO43-), which are parameters causing eutrophication of water. The parameters changes were analysed for the years 2014 - 2017. Significant differences were observed in the all three streams in the water chemisms between upper and lower parts of the watersheds of conductivity and nitrate nitrogen (N-NO3-). The results confirmed that the farming has a significant influence on the water quality in the Pasecký, Bedřichovský and Váčkový stream although it is an extensive farming.

Biochemical Oxygen Demand (BOD) is commonly used for determining how fast biological organisms use up oxygen in a body of water. It is one of the essential methods used in water quality management and assessment. BOD could be considered as a quality level indicator of biologically treated water. This process is very time-dependent but most common period of incubation is five days - BOD(5). In this thesis different periods of incubation are compared - for BOD(5) with five days incubation period and BOD(2+5) with five days incubation period but also placed for two days to lowered temperature environment. These comparative tests were made for different types of water (surface water, waste water - water from mechanical level and biological level of treatment) For all kinds of determination of BOD the dilution method was used (ČSN EN 1899).

The aim of master´s thesis is to get acquainted with the design and materials used in selected automotive light source – tungsten halogen lamp. Further, the thesis focused on the theory and appropriate selection of the thermal measurement method on a real sample. Subsequently, a model of the light source and its simulation in the ANSYS – Maxwell 3D and Mechanical programs are created. Finally, the results of the thermal simulation and the non-contact measurement of the tungsten halogen lamp are evaluated

The subject of this thesis is to assemble a business plan for expansion of production capacities of Industrial Engineering company s.r.o. by acquisition of new technologies. The theoretical part describes the importance of the business plan, the importance of business and basic legal forms of business. The part of it is also a description of the stucture and assembly of the business plan. In the practical parts there is an analysis of the current situation and marketing analysis, alon with the processing of the business plan assessed the feasibility of the project with a positive result.

This diploma thesis deals with the issue of regrigerant cooling. The theoretical part describes laws of termodynamics, basic thermodynamic processes of ideal gas and cooling cycles. The dependence of the cooler bypass factor of air handling unit on its capacity is the main issue of the experimental part. The aim of practical part is to design the air-conditioning device using knowledge of experimental part and compare it with the proposal of air-conditiong device in my bachelor thesis.

Predložená dizertačná práca sa zaoberá analýzou opotrebenia totálnych bedrových endoprotéz za použitia optických metód. V práci bol predstavený nový prístup hodnotenia objemového úbytku materiálu pomocou 3D optického skeneru. Tento nový prístup je časovo efektívny, poskytuje veľké množstvo snímaných bodov na povrchu implantátu. Množstvo bodov umožňuje presnejšiu rekonštrukciu pôvodnej geometrie a prípadné rekonštrukcie nežiaducich poškodení polyetylénovej vložky pri extrakcii. Predstavené metóda bola validovaná za pomoci štandardizovanej gravimetrickej metódy v súlade s ISO 14242. Následne bol optická skenovacia metóda použitá v troch štúdiách zameraných na analýzu opotrebenia, mechanické zmeny artikulujúceho povrchu a mikroštruktúrne zmeny v dôsledku zlyhania implantátu. Analýza 23 extrahovaných polyetylénových vložiek typ Bicon - plus s rozšíreným použitím v Českej republike poukázala na niektoré problémy spojené so zlyhaním implantátu. Adhezívno - abrazívne opotrebenie bolo identifikované v oblasti penetrácie femurálnej hlavice a následné poškodenia ako delaminácia materiálu , plastické deformácie a pitting boli pozorované v okolí tejto oblasti. Analýza materiálových vlastností poukázala na degradáciu mechanických a chemických vlastností, čo bolo prevažne závislé od rozsahu opotrebenia implantátu. U implantátov boli pozorované výrazné plastické deformácie , nárast oxidačného indexu a nižší pomer tvrdosti voči modulu elasticity, v porovnaní s novými vzorkami. Tečenie materiálu a plastické deformácie, ktoré vykazovali všetky extrahované vzorky boli analyzované v závere predloženej dizertačnej práce, na základe testov na nových implantátoch v zábehovom cykle. Cieľom práce je uviesť nový prístup analýzy opotrebenia polyetylénových vložiek za pomoci optických skenovacích metód a preukázať jeho použiteľnosť na analýze súboru extrahovaných implantátov. Výsledky získané pomocou tejto metódy sa ukázali ako vhodné a môžu viesť k lepšiemu pochopeniu procesov opotrebenia a zlyhávania implantátov.

The goal of this thesis is to create overall, automatic and non-contact quality control of a pellet. The issue is divided into two separate parts. The first part deals with precise dimensional measuring of pellet - its length and head diameter so that it is precise and reasonably fast. Precise measuring is achieved with help of algorithms which achieve the sub-pixel precision by polynomial approximation of the edges extracted from the image gradients. The second part deals with the defects of a pellet. Detecting defects like longitudinal furrows or skirt cuts is achieved with convolutional neural networks. The measurement modules work with the resulting precision up to 0.025 mm in case of length measuring and up to 0.01 mm in case of head diameter measuring. In case of defect detections, neural network shows very high classification success rate. The contribution of this thesis is a presentation of innovative approaches in automatic quality control of pellets with use of neural networks and a demonstration of its usage in real manufacturing process.