1 |
Maximum power tracking control scheme for wind generator systemsMena Lopez, Hugo Eduardo 10 October 2008 (has links)
The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.
|
2 |
Maximum power tracking control scheme for wind generator systemsMena, Hugo Eduardo 15 May 2009 (has links)
The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.
|
3 |
Maximum power tracking control scheme for wind generator systemsMena, Hugo Eduardo 15 May 2009 (has links)
The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.
|
4 |
Maximum power tracking control scheme for wind generator systemsMena Lopez, Hugo Eduardo 10 October 2008 (has links)
The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. The dependence on the accuracy of the measurement devices makes the controller less reliable. The proposed control scheme is based on the stiff system concept and provides a fast response and a dynamic solution to the complicated aerodynamic system. This control scheme provides a response to the wind changes without the knowledge of wind speed and turbine parameters. The system consists of a permanent magnet synchronous machine (PMSM), a passive rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In this work, the aerodynamic characteristics of wind turbines and the power conversion system topology are explained. The maximum power tracking control algorithm with a variable step estimator is introduced and the modeling and simulation of the wind turbine generator system using the MATLAB/SIMULINK® software is presented and its results show, at least in principle, that the maximum power tracking algorithm developed is suitable for wind turbine generation systems.
|
5 |
Design of Low-Power Controller-Datapath Systems Using FSM State Assignment and Output EncodingLiang, Jhih-Yuan 14 August 2007 (has links)
In large controller-datapath systems, the switching activity of datapath is administered by controller. The unnecessary switching activity will cause more power consumption, and therefore the design of controllers (i.e. Finite State Machines, FSMs) will influence the whole power consumption of the systems. The state assignment and output encoding are the two major factors influencing the power of system under the hardware implementation of controllers. In this paper, we present an integer linear programming (ILP) method to solve the state assignment and output encoding problems. The purpose is to reduce switching activity such that the goal of power optimization can be achieved. It has not to reschedule the operations of datapath under timing and resource constraints and has no extra area overhead. In order to verify the effectiveness of our proposed ILP approach, we use this approach to implement several controller-datapath systems. Experimental results show that our proposed approach achieves an average of 30.513% power savings compared to the traditional area optimal synthesis tool, SIS, where power is not considered. Our proposed approach does not cause extra area overhead while achieving a significant power saving of systems.
|
6 |
The Fast Iterative Water-Filling Power Controller For Cognitive Radio Net-WorksZhu, Jiaping 04 1900 (has links)
<p> The transmit-power control (TPC) problem is a fundamental problem in cognitive
radio design, which aims at determining transmit-power levels for secondary
users across available subcarriers. This thesis studies both the theory and the
algorithms for the TPC problem for cognitive radio networks, and specifically
examines the problem under two different limitations: an interference-power
limitation and a low-power limitation. First, the TPC problems are cast into
game-theoretic models and the sufficient and necessary optimality conditions ·for
solutions are derived. Sufficient conditions for the existence, uniqueness and stability
of a solution are presented as well. Second, the fast iterative water-filling
controller (FIWFC) for the TPC problem is developed, which is linearly convergent
under certain conditions. The computational complexity is lower than for
the iterative water-filling controller (IWFC) for digital subscriber lines. In order
to evaluate the FIWFC, simulations are carried out for both stationary and nonstationary
radio environments. In addition, the performance of the FIWFC is
evaluated, given the presence of measurement errors. The results of these various
simulations show that the FIWFC outperforms IWFC in terms of convergence
speed in all cases. </p> / Thesis / Doctor of Philosophy (PhD)
|
7 |
A Systematic Approach to Critical Electrical Fault Mitigation Strategies in an Electric Vertical Take-Off and Landing (EVTOL) Electrical Propulsion UnitRamoul, John January 2022 (has links)
The electric vertical take-off and landing (EVTOL) platform is opening a new market segment that is disrupting the commercial and military aircraft industry. This particular vehicle platform is filling the gap between road vehicles and aircrafts. The main idea is to avoid the gridlock in major metropolitan cities where a journey that should take 30 minutes now takes more than one hour. Key enablers such as the newly developed infrastructures known as Vertiports and the move of electrification of aircrafts have driven this new market segment with fast time to market. To enable the deployment of these EVTOLs in the commercial world, their fault behavior needs to be known as faults will happen, a fault mitigation strategy must be developed to ensure that when the fault happens, the EVTOL and its passengers along with its surrounding are protected from catastrophic failures.
To give a brief context on what these EVTOL platforms are, potential and developed EVTOLs in the market currently are introduced. The categorization of these platforms is done within four types of categories being Helicopters, Multi-Rotor, Lift & Thrust and Tilt-X. Their general advantages and disadvantages are discussed and the categories are rated in terms of which platform could be the most viable option to be in service by 2024. Their main electrical distribution system is introduced with their critical components and how they can fail. Each critical component such as the battery, electrical propulsion unit (EPU), protection devices, power distribution units and auxiliary electrical loads are discussed in details.
The thesis discusses one of the main safety aspects of an EVTOL, which is protection of a propulsion unit. The critical electrical faults in the EPU are introduced along with their behavior on the EVTOL electrical distribution system (EDS). Open circuit faults and short circuit faults from the inverter and its power devices to the electric motor are analyzed. Furthermore, the sensor failures such as the rotor position sensor and the current and voltage sensors are discussed. The controller stage failures are discussed as well as it becomes a critical component that can fail in many ways.
Once the electrical faults are discussed, a fault mitigation strategy (FMS) is introduced for each fault ranging from a simple inverter disabling strategy, to a sensorless control law for the loss of position sensor. A protection device known as the solid state power controller (SSPC) is inserted at the input of the EPU and its design is discussed for a 270VDC/180A modular architecture. This SSPC becomes the redundant and final protection stage of the EPU to ensure if the developed FMS fail to protect the EPU, the SSPC can isolate the EPU from the rest of the EVTOL EDS. The main contribution of the thesis is the systematic approach to fault analysis and mitigation/protection strategies that were not addressed in literature so far for this type of platform. The use of a single FMS for multiple faults is introduced where the aim is to reduce the efforts for verification and validation (V&V) of the corresponding software and firmware. Finally, the practical implementation challenges of the SSPC are discussed and shown in experimental lab setups. / Dissertation / Doctor of Philosophy (PhD)
|
8 |
Development and testing of algorithms for optimal thruster command distribution during MTG orbital manoeuvresSprengelmeyer, Lars January 2020 (has links)
An accurate satellite attitude and orbit control is a key factor for a successful mission. It guarantees for example sun acquisition on solar panels, fine pointing for optimal telescope usage or satellite lifting to reach higher orbits, when required. Furthermore attitude and orbit control is applied to compensate any occurring disturbances within the space environment. The problem tackled in the present thesis is the optimization of thruster commanding to perform spacecraft orbital manoeuvres. The main objective is to develop different algorithms that are suitable for on-board implementation and to compare their performance. For an optimal thruster command distribution the algorithms shall solve linear programming (or optimization) problems, more exact they shall compute thruster on-times to generate desired torques and/or forces, which are requested by the on-board software. In total three different algorithms are developed of which the first one is based on the pseudoinverse of a matrix, the second one is a variation of the Simplex method and the third one is based on Karmarkar’s algorithm, which belongs to the interior-point methods. The last two methods are well known procedures to solve linear programming problems and in theory they have been analyzed before. However this paper proves their practical application and industrial feasibility for orbital manoeuvres of the weather satellites of ESA’s MTG project and their scalability to any number of thrusters on a generic satellite for 6 degrees of freedom manoeuvres. There are 6 MTG satellites and each has 16 one-sided reaction control thrusters, placed at specific positions and pointed towards defined directions. Physical mechanisms limit the thrusters output to minimum on- and off-times. The focus of this thesis will be on the orbital transfer mode, due to the high disturbances that arise during four motor firing sessions at the apogee, executed to reach higher orbits and finally GEO. The firing sessions are performed by a liquid apogee engine and while this engine is in boost mode, the thrusters shall be used for attitude control only. The technique (nominal case) developed by OHB for this maneuver and currently operational uses 4 thrusters only, which are all pointing in the engine’s direction. They are also used to settle the fuel before the engine is turned on. For control the Pseudoinverse method is applied. If one of the 4 thrusters fails, the backup scenario takes place, which includes using 4 totally different thrusters and no fuel settling, due to their unfavorable position with respect to the engine. The initial idea of this work was to develop a controller for 6 thrusters, using only 2 of the 4 nominal case thrusters, to have a better control performance in the backup case. The Pseudoinverse method was developed by OHB before, thus only small changes needed to be applied to work with 6 thrusters. The two other algorithms, based on the Simplex and Karmarkar method, were completely developed from scratch. To analyze their performance several tests were executed. This includes unit tests on a simple computer hardware with different input, Monte Carlo simulations on a cluster to test if the algorithms are suitable for MTG orbital manoeuvres and the application to 12 thrusters, mounted on a generic satellite to generate torques and forces at the same time for 6 degrees of freedom manoeuvres. For each thruster configuration the worst case outputs are shown in so called minimum control authority plots. The performance analysis consists of the maximum and average deviation between requested and generated torque/force, the average computed thruster on-times, the algorithms computation(running) time and iteration steps. For MTG the test results clearly confirm that the usage of 6 thrusters leads to more accurate generated torques and better control authority, than using only 4 thrusters. The Simplex method stands out here in particular, showing excellence performance regarding torque precision. Nevertheless the accuracy goes at the expense of computation effort. While the Pseudoinverse method is very fast and needs only one iteration step, the Simplex is half a magnitude, the Karmarkar one magnitude slower. But the latter lead to lower thruster on-times in terms of firing duration and thus fuel consumption is reduced. Also it is shown that Simplex and Karmarkar can control 12 thrusters at the same time to generate torques and forces, which proves their scalability to any thruster distribution. In the end it comes to the question whether generating a more accurate torque/force or the computational effort, which is strongly hardware dependent, is more important. A decision which depends on the mission’s objective. This paper shows that all three implemented algorithms are able to handle attitude control in the MTG backup scenario and beyond.
|
9 |
Aspects on Dynamic Power Flow Controllers and Related Devices for Increased Flexibility in Electric Power SystemsJohansson, Nicklas January 2011 (has links)
This thesis studies different aspects of Flexible AC Transmission System (FACTS) devices which are used to improve the power transfer capability and increase the controllability in electric power systems. In the thesis, different aspects on the usage and control of Dynamic Power Flow Controllers (DPFC) and related FACTS devices are studied. The DPFC is a combination of a Phase Shifting Transformer (PST) and a Thyristor Switched Series Capacitor (TSSC)/Thyristor Switched Series Reactor (TSSR). The thesis proposes and studies a new method, the Ideal Phase-Shifter (IPS) method, for selection and rating of Power Flow Controllers (PFC) in a power grid. The IPS method, which is based on steady-state calculations, is proposed as a first step in the design process for a PFC. The method uses the Power controller plane, introduced by Brochu et al in 1999. The IPS method extends the usage of decoupling methods in the Power controller plane to a power system of arbitrary size. The IPS method was in the thesis used to compare the ratings of different PFC:s required to improve the power transfer capability in two test systems. The studied devices were here the PST, the TSSC/TSSR and the DPFC. The thesis treats control of ideal Controlled Series Capacitors (CSC), TCSC, TSSC/TSSR, and DPFC. The goals of the FACTS controllers which are developed are Power Oscillation Damping (POD), fast power flow control, and transient stability improvement in the power system. New adaptive control strategies for POD and power flow control are proposed and studied in different models of power systems by time-domain simulations. A strategy for transient stability improvement is also proposed and studied. Additionally, different methods for study of Subsynchronous Resonance (SSR), which is associated with series compensation in power systems, are investigated. Here, four of the most common methods for frequency scanning to determine the electrical damping of subsynchronous oscillations in a power grid are studied. The study reveals significant differences of the electrical damping estimates of the studied standard methods when applied to a four-machine test system. / QC 20110819
|
10 |
Měřicí systém pro sledování efektivity fotovoltaického panelu / Measuring system of photovoltaic modules efficiencyVrána, Michal January 2012 (has links)
This thesis describes the design of the active load for adjusting the maximum power point of PV module and the module loaded with the defined parameters for measuring the effectiveness and identifying the characteristics of the PV module.
|
Page generated in 0.1209 seconds