The goal of this master thesis is to evaluate an investment project to a biogas power plant. The first part of the master thesis defined the essential theory needed for the capital investment decisions. There is overview of the most important investment criteria like net present value and methods and sources of project financing. In the analytical part I calculate the necessary values like revenues, operational costs and depreciation in order to find out projects cash flow. The investment is then evaluated by investment criteria. In order to make the analysis more accurate the sensitivity analysis is made. In the last part of the thesis there is an overview of results and a investment recommendation.

A utilização de energia solar fotovoltaica é amplamente difundida no mundo e possui caráter promissor no Brasil atualmente. Apesar do grande potencial brasileiro, esta fonte de energia ainda apresenta baixos níveis de utilização. A competitividade da geração fotovoltaica de grande porte em usinas solares fotovoltaicas ainda não atingiu patamares admissíveis com taxas de retorno financeiro atrativas ao mercado nacional. Por se tratar de uma fonte de energia renovável, sua utilização no cenário mundial tem apresentado crescimento nos últimos anos. Mesmo em países que apresentam potenciais solares inferiores aos do Brasil, esta fonte de energia tem se mostrado competitiva devido aos incentivos oferecidos. Tendo em vista este prisma, o presente trabalho busca apresentar possibilidades de inserção de usinas solares fotovoltaicas no Estado do Rio Grande do Sul. A usina proposta possui capacidade de geração de 30 MWp. Este estudo visa apresentar uma proposta de diversificar a geração de energia elétrica no estado do Rio Grande do Sul, apresentando uma nova alternativa de geração de energia renovável. Para tal realização, foram estudadas as linhas de transmissão e subestações existentes no estado do Rio Grande do Sul como forma de avaliar a possibilidade de conexão direta da nova usina, tendo como objetivo a redução do custo de instalação. Foi realizado o cálculo da produtividade fotovoltaica para o estado do Rio Grande do Sul e a análise dos custos de instalação desta fonte no Estado, bem como a relação de preço da geração centralizada no estado. / The use of photovoltaic solar energy is widespread in the world and has promising character in Brazil today. Despite the large Brazilian potential, this energy source still shows low levels of utilization. The competitiveness of photovoltaic generation in large solar photovoltaic power plants has not yet reached acceptable levels with attractive rates of financial return to the national market. Because it is a renewable source of energy, its use in the world has been increasing in recent years. Even in countries that have lower solar potential than Brazil, this source of energy has been competitive due to the incentives offered. Given this perspective, this paper seeks to show the possibilities for integration of photovoltaic solar plants in the state of Rio Grande do Sul. The proposed plant has a generation capacity of 30 MWp . This study aims to present a proposal to diversify the electricity generation in the state of Rio Grande do Sul, presenting a new alternative source of renewable energy . For this achievement, the existing transmission lines and substations were studied in the state of Rio Grande do Sul as a way to evaluate the possibility of direct connection of the new plant, with the objective of reducing the cost of installation. The calculation of photovoltaic productivity for the state of Rio Grande do Sul and cost analysis of installing this source was held as well the price ratio of centralized generation.

Online monitoring supports plant reliability and performance management by providing real time information about the condition of equipment. However, the intricate geometries and harsh operating environment of coal fired power plant boilers inhibit the ability to do online measurements of all process related variables. A low-cost alternative lies in the possibility of using knowledge about boiler operation to extract information about its condition from standard online process measurements. This approach is evaluated with the aim of enhancing online condition monitoring of a boiler’s convective pass heat exchanger network by respectively using a soft sensor and a data-driven method. The soft sensor approach is based on a one-dimensional thermofluid process model which takes measurements as inputs and calculates unmeasured variables as outputs. The model is calibrated based on design information. The data-driven method is one developed specifically in this study to identify unique fault signatures in measurement data to detect and quantify changes in unmeasured variables. The fault signatures are initially constructed using the calibrated one-dimensional thermofluid process model. The benefits and limitations of these methods are compared at the hand of a case study boiler. The case study boiler has five convective heat exchanger stages, each composed of four separate legs. The data-driven method estimates the average conduction thermal resistance of individual heat exchanger legs and the flue gas temperature at the inlet to the convective pass. In addition to this, the soft sensor estimates the average fluid variables for individual legs throughout the convective pass and therefore provides information better suited for condition prognosis. The methods are tested using real plant measurements recorded during a period which contained load changes and on-load heat exchanger cleaning events. The cleaning event provides some basis for validating the results because the qualitative changes of some unmeasured monitored variables expected during this event are known. The relative changes detected by both methods are closely correlated. The data-driven method is computationally less expensive and easily implementable across different software platforms once the fault signatures have been obtained. Fault signatures are easily trainable once the model has been developed. The soft sensors require the continuous use of the modelling software and will therefore be subject to licencing constraints. Both methods offer the possibility to enhance the monitoring resolution of modern boilers without the need to install any additional measurements. Implementation of these monitoring frameworks can provide a simple and low-cost contribution to optimized boiler performance and reliability management.

京都大学 / 0048 / 新制・課程博士 / 博士(農学) / 甲第21826号 / 農博第2339号 / 新制||農||1067(附属図書館) / 学位論文||H31||N5198(農学部図書室) / 京都大学大学院農学研究科地域環境科学専攻 / (主査)准教授 髙橋 知之, 教授 北山 兼弘, 准教授 刑部 正博 / 学位規則第4条第1項該当 / Doctor of Agricultural Science / Kyoto University / DFAM

The theme of this master thesis is „Energy supply to the site Technická 2“. This thesis is divided into several parts. First we will get in touch with concept of combined heat and power and also with principle of photovoltaic electricity production. We will continue with description of site before and after reconstruction. Then we will follow with analyze the effect of reconstruction on energy consumption. In the end we will make some suggestions for using the local source of heat and electricity in Faculty of mechanical engineering, Brno university of technology. All suggestions will be analyzed from energy and economic point of view.

Nowadays, the climate change issue is becoming more and more actual in our society. Increase of the average temperature on Earth in a couple of degrees could have catastrophic consequences. One of the possible solutions seems to be renewable energy sources as photovoltaics, biomass of water and wind energy. This thesis deals with the aerodynamics problems of wind energy source. Wind turbines transform kinetic energy of wind to mechanical power. The efficiency is physically limited to 59,26 %, but in reality, it is getting around 45 %. This is caused by three biggest losses inducted in wind turbines as wake losses, losses due to finite number of blades and drag losses. Based on analytical relationships and including these three losses the aerodynamics blade design is conducted. Later, the numerical simulations show higher values of drag and lower values of lift force on airfoil compared to analytical calculation. In fact, percentage deviations are acceptable and to conclude, the numerical analysis was able to relatively accurately simulate force action of free stream velocity on the blade.

The diploma thesis is focused on the evaluation of a photovoltaic power plant in the company premises. The first chapters briefly discuss the theory of electricity generation using photovoltaic panels. It describes the principle of operation of photovoltaic panels, history, production, etc. In the practical part of the thesis we focus on the evaluation of the company's photovoltaic power plant when comparing real data with simulations.

This diploma thesis is focused on the assessment of the possibilities of disposal of photovoltaic panels installed in the Czech Republic. In addition to the basic theory of photovoltaic cells and panels, the theoretical parts describe legislation, subsidies in the field of photovoltaics and the development of photovoltaics in the Czech Republic. As part of recycling, their methods, work with the collective system, as well as the impact on the environment are analyzed. In the experimental part, using the data of the installed capacity and the average weights of the panels, various projections of the disposal of the panels over time are made, which take into account factors such as the life of the power plant or the capacity of the recycling line. Furthermore, according to the available literature, an analysis of the revenue from the sale of recycled materials contained in panels installed in our territory is performed. Subsequently, the needs of future implementers of proven estimates of labor and logical demands were assessed. Finally, an economic evaluation of the fundamental aspects of the FRELP recycling process was performed and the net prices of different recycling directions were determined.

We discuss a model of a virtual power plant (VPP) that provides market access to privately-owned distributed generations (DGs). The VPP serves passive loads, processes bids from generators, and trades in the wholesale market. The generators can be renewable or thermal, and they act strategically to maximize their own profit. The VPP establishes the rules of the internal market to minimize the cost of energy and the cost of balancing while ensuring generator participation and load balancing. We derive a heuristic mechanism for internal market and propose a dynamic programming approach for minimizing the VPP cost. We present illustrative simulations for both single and multistage market bidding and then compare the resulting performance to the centralized VPP model, where the DGs are assumed to be owned by the VPP. We show that the proposed design incentivizes the DG agents to behave the same as in the centralized case, but the optimal cost paid by VPP is higher due to the payments to the DG owners.

The aim of this paper is to acquaint the readers with basic classification of wind turbine configuration by used electric generator, with speed and power control used in power plants and with mathematical model of wind and parts of power plant. Procedure of making model in applications Mathematica and MathModelica is described in the other part of this paper. There were made models of power plants with squirrel cage asynchronous generator, one with pitch control, the other with stall control. In the last part of the thesis comparison of model behavior of both models with the same input conditions was made.