The aim of my work is to study two variants of local road that will create links to the new house-building in the locality "U Vodních zdrojů", in the village Olešnice. I have worked out the preferable alternate into the stadium of documentation for building licence. The route is chosen to ensure accessibility of the site and to minimize earthwork. In the project, I respected the norms and technical regulations.

This diploma work concentrates on the study of a theatre building for Poniklá village. The theoretical part attends especially to the theatre area, the submitter's profile, and to the directive references related to the theatre designing. The work solution itself consists in a design of a supporting structure and other applied structures in the facility, in the evaluation of their relation to the fire safety, acoustic parameters and thermic properties. The issue of individual halls (auditoriums), where visibility and acoustic is designed, is more specified. The design of the property heating and ventilation is a part of the work. Furthermore, the drawing documentation describing the property range needed for the study is attached to the diploma work.

The thesis is focused on detailed design proces of pre-assembly workplaces in an all-around appliance producing company situated in Olomoucký region. Thesis briefly depicts contemporary allocation of workplaces and then is closely aimed on new possibilities in allocation of both current and newly estabilished workplaces in a definitively set out hall space. Furthermore part of the thesis is dedicated to capacity and financial analysis as well as technical-economic evaluation.

This graduation thesis deals with a software design of burglar alarm. The software has been developed in compliance with the applicable standards and regulations governing burglar alarm designs and on the basis of practical experience with designing and implementing electronic security systems. The software is written in C# and uses .NET platform. On the ground of that, this software can be run on any computer with the Windows operation system. Any ground plan picture file can be used as the underlying project map on which all the object security system can be built. It makes it possible to produce both wire and wireless electronic security systems. The software includes an editable database of components and conductors used in the electronic security alarms. The database components can be created, edited and deleted through the software. The database has been saved in format XML. The software also includes a folder of picture files containing photographs of the components and schematic symbols used in the software. You use a mouse to drag and drop individual components into the ground plan picture, where they are well arranged in a tree structure. The components can be interconnected by a conductor, which enables creation of a precise design of the electronic security system of the object. The software output includes drawings, bills of material and pricing. As for the space components, you can graphically display their range and thus visually confirm the design. The software includes automatic design verification. There, you can verify whether the right components have been used and whether the designed conductor lengths are acceptable, whether they correspond with the system load, and whether the voltage drops on the conductors do not exceed the permitted limit. The software has been developed for all electronic security system designers and for engineers attending to these problems.

The purpose of this study became the theoretical interpretation of the technological projection region, handling technique and material flow used in industrial production. In the practical section is presented the concrete company where we change the method of manipulation transportation. This change is suppported by economical investment return of this capital cost.

The aim of this thesis is design of technology project for plastic manufacturing. The theoretical part is focused on the characteristics of plastics and plastics production, especially for injection molding of thermoplastics. In the practical part are presented the calculations needed to choice of the injection molding machines and the capacity calculations to determine consumption of granulate and productivity of injection molding machines. Part of this thesis is a list of optimal machinery, including the required peripherals and handling devices complying with the current requirements of a modern plastic manufacturing. The result of this thesis is an economic evaluation of investment costs of machinery for small and medium-sized plastic manufacturing.

This master’s thesis deals with optimizing the layout proposal of workplaces in a small engineering company. The work is to assess the current status, capacity calculation, design options to improve with subsequent selection of the optimal design and economic evaluation.

Tirad, a metal machining company, plans to build a new hall as an extension of its operation. This paper deals predominantly with production flow analysis of present operation. The analysis draws upon literary study and the company's previous production experience. Possible placement of machines is suggested in the following part of the paper, based on the analysis and requirements of the company. The fundamental requirement is to separate roughing and finishing technological operations, moving the latter completely into the new hall. The deployment of machines is optimized with regard for materiál flow. The new hall's dimensions are outlined in a drawing. Three options of machine deployment are discussed. In conclusion, these options are compared to one another and also to the present state.

Thesis contains summarizing of main activities of technological projecting. The project itself analyzes the production of gear-boxes on a machine line, which caused transferring the production to a machining center. This real project is implemented on the basis of very detailed cost calculations substantiated by a positive result.

The thesis is focused on proposal for the new layout of technological worplaces. At first, it analyzes the present state. The second step is the design of possible variants of the new layout. These variants are evaluated. The economic evaluation is performed for chosen variant.