This thesis describes the workplace workshop in ALPS Electric in Sebranice. It contains a brief description of machinery and theory of technological projecting. For this department is created proposal of the modification flow racks and the transportation. There are budgets for this proposals. The aim of the thesis is to create drawings documentation for the current and future location the workplace workshop.

This thesis deals with the classic and system wiring as well as their implementation and visualization environment for its operation. The aim of this work is to implement the project of the existing high-voltage and low-voltage wiring housing units accompanied by a design of the system wiring. This design is then fully implemented. In the beginning of the work is introduction to system wiring as such, added by a brief comparison of current systems. Followed by two chapters dealing with two selected systems for the realization of wiring. These chapters succinctly capture the essence of the system, its characteristics and features offered by each system. The last part deals with project design of wiring for the residential unit and the procedure for its commissioning. The practical part is dedicated to creating drawings with the existing power and low voltage distribution systems, the design of the smart wiring and electrical switchboard, together with possible modifications. The project documentation also discusses technical report. Finally, the selected system is tested and commissioned according to the requirements.

The presented MSc. thesis is focused on the introduction and application of PDMS software in the process piping designing area. The introduction to the employing of the PDMS software is elaborated in the first part of the thesis as practical user manual of this software followed by the benefits of this software as a recognized supportive design program are consequently illustrated on partial solved cases from common design practice. The particular benefit of deploying PDMS in design practice is demonstrated in the thesis by economic evaluation of two selected solved industrial projection cases where design optimization of process piping system is solved with the support of this software system. Introduction of new ones broadening possibilities and current trends in the supportive design software systems, specifically using the scanner and supporting Everything3D are also presented as part of the thesis on a concrete example of the reconstruction of the boiler room.

This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.

Issues of the project management with the possibility of artificial intelligence in information management has been solved in this thesis. The solution of this problem has been made on the basis of the publications listed in the information resources that produce description of initial conditions for the theoretical part of this thesis. The model of the company‘s project management with a selection of artificial intelligence methods in designing the HelpDesk for the company has been created on analysis of information management business basis.

This thesis deals with technological project of production of rotating parts, more design layout of the workplace light machining - turning in the company TOS KUŘIM - OS, a.s.. Workplace design is based on both the requirements of company and the principles of technological design. Part of this thesis is the design of three variants of machines arrangement, which are evaluated. Selected of the best option is further elaborated in detail the calculation of capacity, drawing documentation, and economic-technical evaluation.

This diploma thesis describes optimization of assembly working place of cylinder locks brand FAB company ASSA ABLOY Rychnov, s.r.o. Theoretical part deals with universal process for designing manufacturing systems and for description of selected analytical and engineered methods and ergonomics .The practical part shows evaluation of current situation and create new time standards. in accordance with are designed 3 variants of the solution for lay out working place. For each variant is created simulation model, which is explore especially working load and automatic filling machine. The various options are compared by weight valuation and the most optimal is determined by maximal work in process and optimal warehouse supply of input components.

This thesis deals with an experimental verification of powdered plastics coating on a component with a painting shop layout. Part of this thesis is looking for the best kind of a paint which meets the wishes from the company such as specific dielectric strength or cladding thickness. The selective variation is drown up into the technological project. At the end of the thesis there is a technical-economical evaluation of the project, focusing mainly on the efficiency of the investment in new mechanical equipment and on the economic return.

This thesis deals with rationalization layout of air and fuel filters production in the company MANN-HUMMEL (CZ) s.r.o., which ensures minimization of work in process and design optimal load of production on the basis measured and analyzed times operations of production. Part of thesis is the design layouts of workplace with selection of optimal variation which provides shortening and better overview on flow of material production.

The thesis deals with the design and arrangement of a new paint line at company Automotive Ligting s.r.o in Jihlava. It deals with design of several possible options of arrangement of machines that are required for the processing of polycarbonate granules and their conversion into acrylic glass using two-component injection molding. The glass is then coated with the coating line which is part of the arrangement included in this project. Design of the individual sites and their organization is based on both the company's requirements and the principles of technological design. The best of the three options is analyzed in detail and evaluated from the economic point of view.