The diploma thesis deals with the design of a new production hall for sheet metal processing in KOVOT Invest s.r.o. The content of the thesis is the analysis of the current state, the capacity calculations of individual technologies and warehouse management. Further design of the layout solution in the hall and economic evaluation of the investment.

This master´s thesis is focused on technological designing in a small company ENGITEC Motosport s.r.o. In first theoretical part of the thesis is this subject described in detail and analyzed in terms of economic and technical aspect. Next part describes the current state of the company and the production hall as well with keep on its current layout. In the following chapters is chosen piston-shaped component, which is manufactured by the company and three different variants of the piston production. Then one of them is selected, to which all related capacities calculations are made. In the final part of the thesis is proposed the relevant final layout of the hall and there is also the technical-economic evaluation of the most relevant variant included. Key words

The diploma thesis is focused on selected designing works related to the design of a specific process of acid water stripping. The main purpose of the work is to describe the procedure and the obtained results for these performed design work based on the relevant assignment and the process requirements. In the introductory two chapters, the work focuses on process introduction and description of main process equipment. The following chapters are devoted to the description of the designing works, specifically simulation of the process in CHEMCAD, design calculation of the spiral plate heat exchanger for feed preheating, creation of 3D model and drawing documentation using AutoCAD Plant 3D and lastly strength analysis of the selected pipeline. The main outputs of this work are mainly generated result reports from the process and equipment simulation and strength analysis of the solved pipeline route, 3D model of the process and selected technical and drawing documentation. At the end of the diploma thesis, the performed activities and their outputs are summarized and evaluated.

This thesis deal with suggestion of program, which channelize technologist-planner whole tasks which are unit with projection. Deal with capacitive calculation methods and technology projection methods. This methods were implementing in program Excel and AutoCAD. It was reaching configurational guide in html format, which unit whole section of program.

Title Transformation and the Utilization of the School Garden of the Elementary School Jílové u Prahy Since Establishment Until Today. Annotation The goal of my thesis is to monitor the establishment and the development of our school garden. In the first, theoretical part of my thesis, I outlined the historical events and attempts that would lead to the establishment and the decline of school gardens in the Czech Republic. This is closely linked to the historical developments of the Czech educational tradition. This part of my thesis is backed up by the information found in specialised and professional literature. In the second part of my thesis, i.e. my research, I have focused on collecting the information about the process of building a new school in Jílové u Prahy and about the development and changes in the adjoining school area from the day it was opened until now. My research is based on documents found in the archive, class records and annual reports. I gained lots of valuable information from interviews with eyewitnesses. In my conclusion, I compare the development phases of the school area and outline my findings in terms of the function of the school garden for the teaching process at the ground school. Key Words Key words: history of school gardens, ZŠ Jílové u Prahy, school area, school garden,...

The topic Modern Approaches to Designing Electrical Equipment with a Focus on Railway Construction responds to the decision of the Government of the Czech Republic to introduce the BIM method for government over-the-counter contracts from 1 January 2022. The government evaluated the BIM method as an effective tool for digitizing the construction industry. The diploma thesis deals with the method of designing high-current equipment, technologies and distribution on railways according to this new method. The work summarizes information about the present method of design, used high-current electrical equipment on the railway, the near and distant future of railway operation, the organization of administration and maintenance of equipment. It discusses the principle of the BIM method and basic software solutions supporting design activities according to this new method. The Promis.e software published by Bentley is also described in detail, which supports the design of electrical equipment for linear structures according to this method. The BIM method is a means of fulfilling the essence of Construction 4.0. It uses uniform data formats, a common data environment, working with non-graphic information. In the second part of the diploma thesis, the drawing documentation for the sample project of high-current distribution of the railway station was prepared. It was first created using AutoCAD software. After that, the sample project demonstrates the basic principles of the BIM method using Promis.e software. Furthermore, this project is evaluated, both methods of design are compared. The procedure of introducing the BIM method for the design of electrical equipment in a specific design company is proposed and other possible steps in working with the Promis.e software are discussed. The way of creating a and adding element libraries is described. At the end of the diploma thesis it is stated that to successfully master the design work according to the BIM method, it is necessary to have experience with design work in the field, know the principles of the BIM method, choose a suitable software solution, continuously and thoroughly manage these tools and train staff. Under these conditions, it will be possible to make full use of the potential of the BIM method.

The master’s thesis „Support for instruction in electric fire alarm system” describes principles and engineering solution of electric fire alarm system. It is background for activity task about EPS for students in VUT in Brno. It illustrates how to act on this task and configuration fire panel and components EPS with the support of software FSP 5000. The practice contains proposal EPS with support in fire system designer.

The aim of my thesis is the current look and evaluation of architecture from the period of real socialism in Brno, since liberation in 1945 to the period of normalization in the seventies of the twentieth century, till 1975 (including duration of the implementation of the buildings). Emphasis put on realizations which are important from the nationwide perspective