Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2016-11-11T16:24:00Z No. of bitstreams: 0 / Made available in DSpace on 2016-11-11T16:24:00Z (GMT). No. of bitstreams: 0 / A operação dinamicamente estável com zonas conjuntas foi obtida para um ressonador laser contendo dois bastões de Nd:YAG com módulos laser comerciais. O ressonador não polarizado gerou 115 W de potência no modo transversal fundamental TEM00. Quando polarizado por lâmina de Brewster atingiu 100,5W de potência de saída com 91% de polarização. Quando o ressonador foi polarizado com um polarizador de filme fino, obteve-se melhora na qualidade de feixe e um aumento na polarização, com o valor de M2 sendo 1,56 e 1,84 nas direções x e y respectivamente com 95,4% de polarização. A potência de saída foi, ao nosso conhecimento, a mais alta obtida para lasers polarizados operando no modo fundamental e usando módulos lasers comerciais de Nd:YAG bombeados lateralmente por diodos sem nenhuma preparação especial. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Orientador: Daniel Pereira / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin / Made available in DSpace on 2018-08-08T18:30:13Z (GMT). No. of bitstreams: 1 Costa_LeversonFariasLamonier_D.pdf: 15914858 bytes, checksum: 1c9b9d5747ffb493f5451d81d2898051 (MD5) Previous issue date: 2007 / Resumo: Neste trabalho realizamos três importantes etapas: 1) montar e caracterizar um laser selado de 13C02, 2) empregar o laser selado de 13C02 como fonte de bombeamento óptico para a molécula de metanol CH30H, e utilizá-lo pela primeira vez, para excitar o isótopo de metanol 13CH30H para geração de ondas na região do TeraHertz (THz) e 3) Propor "assignments" para as transições THz do CH30H e do 13CH30H. Para excitar as respectivas moléculas de metanol, um tubo comercial selado de 13C02 foi montado e caracterizado num ressonador laser Fabry-Perot. Dois cabeçotes de aluminio foram conectados por 4 barras de invar, separado em 135cm. Em um dos cabeçotes, temos uma grade de difração (150 linhas/mm) na configuração Littrow para selecionar as linhas de emissao do respectivo laser. 0 2° cabeçote suporta um espelho de saída de ZnSe (90% de refletividade com 10m de raio de curvatura) acoplado num PZT para sintonia fina da frequência do laser. No sistema de alimentação, usamos uma fonte de alta tensão comercial (25kV, 8mA) operando em regime DC. Com isso, utilizamos o respectivo laser para excitar as moléculas CH30H e 13CH30H, onde fomos pioneiro no uso do mesmo para bombeio óptico da molécula 13CH30H. Decorrente disso, obtemos os espectros de absorção em torno de cada linha de emissão do 13C02 dos respectivos metanol. Estes dados serviram de referenda para investigação sistemática de novas emissões THz, onde observamos e caracterizamos 12 novas linhas THz do CH30H e 19 do 13CH30H. Todas foram caracterizadas em relação ao seu comprimento de onda, offset, pressao de trabalho, polaridade e intensidade relativa.Utilizando os dados de linhas THz observados por nós, e os espectros de absorção a Transformada de Fourier do CH30H e do 13CH30H, um programa computacional intitulado "Ritz", identificou "assignments" para 4 transições THz do CH30H e 9 emissoes THz para 13CH30H, respectivamente / Abstract: In this work we accomplish three important tasks: to mount and to characterize a laser sealed-off 13C02 to optically pump first time methanol molecules CH30H and 13CH30H for generation of TeraHertz waves; Proposed assignments for transistions THz of the CH30H and 13CH30H. For optical pumping we use a commercial sealed-off 13C02, tube in a homemade Fabry-Perot laser resonator, mounted on two aluminum blocks connected by invar rods and separeted by 1.35m. One block holds a grating (150grooves/mm) used in Littrow configuration to select the emission line, while the second block supports a ZnSe output mirror (90% reflectivity and 10m radius of curvature) mounted on a PZT for fine frequency tuning. We use high voltage power supply (25kV, 8mA) to operate the 13C02 laser in CW regime. A cooling system maintains operation of the laser tube at -10o C. Output powers of l0 W and 1l0 MHz tuning range are typical for lines with higher optical gains. After, molecules CH30H and 13CH30H, optoacoustics spectroscopy (OA) signal, obtained around each sealed-off 13C02 laser line were the starting point to search for THz laser lines. For the more intense OA signal, a systematic investigation was performed to observe and characterize 12 new THz lines of the CH30H and 19 THz emissions of 13CH30H that they had been characterized in wavelength, offset, working pressure, relativepolarity and relative intensity. The available data has been compared a Ritz analysis of the high-resolution Fourier-Transform absorption spectrum of CH30H and 13CH30H, resulting in the assignments for 4 THz transistions of the CH30H and 9 THz emissions for 13CH30H, respectively / Doutorado / Física Atômica e Molecular / Doutor em Ciências

Orientador: Carlos Alberto Mariotoni / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo / Made available in DSpace on 2018-08-12T13:17:33Z (GMT). No. of bitstreams: 1 Borin_FernandoLuders_M.pdf: 5674159 bytes, checksum: 06b685198e7c4437396ce7f2a615662d (MD5) Previous issue date: 2007 / Resumo: Este trabalho tem por objetivo fornecer maiores subsídios tendo em vista a matriz energética brasileira, no que se refere ao planejamento, repotênciação, operação e controle dos sistemas de geração de energia elétrica, de modo a prover meios de otimização mais eficazes, reduzindo os impactos de recursos naturais e econômicos demandados pelo sistema elétrico de geração e transmissão. O uso de técnicas de rotação ajustável já vem sendo empregado com sucesso em vários casos, tanto a nível nacional, quanto a nível internacional. A geração através de sistemas eólicos é o exemplo mais forte neste sentido, superando as expectativas de planejamento em vários casos. Os sistemas eólicos só podem operar por meio de técnicas de rotação ajustável. Contudo, a utilização das técnicas de rotação ajustável, tem muito a contribuir, mediante devidas ponderações, nos mais diversos segmentos de geração de energia. Qualquer que seja o caso, é possível de se obter ganhos consideráveis, no que se refere à otimização dos aproveitamentos energéticos. Dentro deste contexto, o trabalho apresenta um panorama geral das alternativas de geração de energia elétrica, e os possíveis ganhos que o sistema de rotação ajustável pode disponibilizar em cada um destes casos. Inicialmente são abordados aspectos gerais dos sistemas convencionais, de forma a estabelecer parâmetros de comparação. A seguir, aspectos específicos de geração por meios hidráulicos, térmicos, eólicos são abordados. Uma análise referente a sistemas isolados de geração também é apresentada, agregando vantagens adicionais não evidenciadas nos sistemas interligados. Desta forma, espera-se que levando em consideração estas técnicas de rotação ajustável, possam conduzir a investimentos relativos de expansão, reforma e operação do sistema de forma mais racional, minimizando impactos ambientais e sociais, contado ainda com ganhos de eficiência disponibilizados. / Abstract: This work has for objective to supply larger subsidies the head office Brazilian energetics, in what he/she refers to the planning, retrofitting, operation and control of the systems of electric power generation, in way to provide more effective optimization means, reducing the impacts of natural and economical resources disputed by the electric system of generation and transmission. The use of techniques of adjustable speed has already been used with success in several cases, so much at national level, as for international level. The generation through eolic systems is the strongest example in this sense, overcoming the planning expectations in several cases. The eolic systems can only operate through techniques of adjustable rotation. However, the use of the techniques of adjustable speed, has a lot to contribute, by the due considerations in the most several segments of generation of energy. Any that is the case, is possible of obtaining won considerable, in what it refers the optimization of the energy uses. Inside of this context, the work presents a general panorama of the alternatives of electric power generation, and the possible impacts that the system of adjustable speed can make available in each one of these cases. Initially general aspects of the conventional systems are approached, in way to establish comparison parameters. To proceed, specific aspects of generation for means hydraulic, thermal, eolics are approached. An analysis regarding isolated systems of generation is also presented, joining additional advantages no evidenced in the interlinked systems. This way, it is waited that taking into account these techniques of adjustable rotation, they can lead to relative investments of expansion, it reforms and operation of the system in a more rational way, minimizing environmental and social impacts, still counted with won of efficiency made available. / Mestrado / Recursos Hidricos / Mestre em Engenharia Civil

This master’s thesis deals with the feasibility study of the pumped-storage hydropower plant. Design is divided at three parts – upper water-reservoir with water intake, penstock with cabel tunnel and mechanical room with four Francis reversible turbine. Study contains engineering report, hydraulic calculations, photodocumentation and drawing documentation.

The aim of this thesis is to study the issue of eniveromental scanning electron microscopy and pumping gas to create vacuum in the newly designed scintillation detector. Further, creating a model of recently proposed scintillation detector and simulating and analyzing pumping gas in differentially pumped chamber of detector. The theoretical part deals with electron microscopy, electron sources, electron optics and secondary electrons detectors. It is also presented which signals are generated by the electron beam on the surface of a solid. Further fluid flow issues and equations describing the flow in the solved chamber are dismantled. Furthermore, the impact of gaseous environment on the trajectory of primary electrons, because there are collisions of primary beam with atoms and molecules of gas. The following section discusses creating, quality and importance of the network in mathematical modelling. A method of a final volume used to calculate the differential equations describing the flow of gas at the premises of the detector is described . The practical part consists in creating a model of scintillation detector and analyzing the gas flow in drawing a vacuum in the newly designed scintillation detector. At the end the simulation results of gas flow are compared for different variants of apertures and various pressures on the neck of a scintillation detector designed for optimum performance of the detector. The outcome of this thesis is model of newly designed scintillation detector with optimized shapes of apertures according to functional requirements.

The present work deals with electron microscopy, electron microscopy primarily environmental. The main task of the work will draft the optimal shape of the differentially pumped chamber, dividing the pressure difference between tube and chamber with sample for a new concept of an electron microscope. By ANSYS Fluent will be analyzed pumping gas. Subsequently, according to the results obtained will be a modified form of the differential Chamber and to achieve the lowest gas pressure on the track of the electron beam.

This master´s thesis discusses the analysis of the shape of the intake ports of differentially pumped chamber for the current concept. The first part is an introduction to the microscopy issue, then it is focused on ESEM microscopes and it also includes a describtion of the Flow dynamics and a mathematical describtion. In the following chapters the software Solid Works, where the model of differentially pumped chamber is created, and the software Ansys Fluent, which is used for analysis, are described. The second part concerns the proposed concepts and the results of their simulations. At the end of the work the results are analyzed and evaluated.

This thesis deals with modelling and simulation of the power set of pumped storage hydro plant. This power set control opening/closing the stator blades of Francis reverse turbine in Dalesice. It is a positional servomechanism where input signal is desired value of turbine opening. The goal of this work is to create computer modell of this power set in Matlab-Simulink. This modell must be comparable with properties of real power set and after modification usefull to other water power plants. Characteristics of computer modell can be verify with real measuring.

This thesis deals with the simulation of fluid dynamics in environmental scanning electron microscope and evaluate solvers setup, the degree of discretization, choice of turbulent model and proposal optimal design of environmental scanning electron microscope. The theoretical part describes the issue of environmental scanning electron microscopy, software SolidWorks and ANSYS Fluent, basic equations describing fluid status, fluid turbulence, the mean free path of molecules and electron scattering. The practical part of the thesis is to create the model of environmental scanning electron microscope AQUASEM II in CAD system SolidWorks and simulation of fluid flow in the sample chamber before aperture PLA1 by ANSYS Fluent. A series of simulations provided the perfect setting solver. These knowledge are used in the second stage of the practical part, where is proposed optimal shape of the table sample and the input aperture PLA1.

The aim of this thesis is to study the issue of eniveromental scanning electron microscopy and pumping gas to create a vacuum in the newly designed scintillation detector. Further, creating a model of recently proposed scintillation detector and simulating and analyzing pumping gas in differentially pumped chamber of detector and the results compare with the previous model. The theoretical part deals with electron microscopy, electron sources, electron optics and secondary electrons detectors. It is also presented which signals are generated by the electron beam on the surface of a solid. Further fluid flow issues and equations describing the flow in the solved chamber are dismantled. Furthermore, the impact of gaseous environment on the trajectory of primary electrons, because there are collisions of primary beam with atoms and molecules of gas. The following section discusses creating, quality and importance of the network in mathematical modelling. A method of a final volume used to calculate the differential equations describing the flow of gas at the premises of the microscope is described . The practical part consists in creating a model of scintillation detector and analyzing the gas flow in drawing a vacuum in the newly designed scintillation detector. Furthermore, the simulation results are compared with the results of simulations on the older type of scintillation detector. The output of this thesis is model of recently proposed scintillation detector with visualized simulation results.