The objective of this thesis was to advance understanding in the field of biolubrication, finding inspiration from the human synovial joints. This was addressed by investigating the association of key biolubricants and the resulting lubrication performance. Techniques employed during the course of this work were Atomic force microscopy (AFM), Quartz crystal microbalance with dissipation monitoring (QCM-D), X-ray reflectivity (XRR). Key synovial fluid and cartilage components like dipalmitoylphosphatidylcholine (DPPC), hyaluronan (HA), lubricin, and cartilage oligomeric matrix protein (COMP) have been used in the investigations. Focus was towards two lubrication couples; DPPC-hyaluronan and COMP-lubricin. DPPC-hyaluronan mixtures were probed on hydrophilic silica surfaces and COMP-lubricin association structures were explored on weakly hydrophobic poly (methyl methacrylate) (PMMA) surfaces. Investigations of the COMP-lubricin pair revealed that individually these components are unable to reach desired lubrication. However in combination, COMP facilitates firm attachment of lubricin to the PMMA surface in a favourable confirmation that imparts low friction coefficient. DPPC and hyaluronan combined impart lubrication advantage over lone DPPC bilayers. Hyaluronan provides a reservoir of DPPC on the surface and consequently self-healing ability. Other factors like temperature, presence of calcium ions, molecular weight of hyaluronan, and pressure were also explored. DPPC bilayers at higher temperature had higher load bearing capacity. Association between DPPC Langmuir layers and hyaluronan was enhanced in the presence of calcium ions, and lower molecular weight hyaluronan had a stronger tendency to bind to DPPC. At high pressures, DPPC-hyaluronan layers were more stable compared to lone DPPC bilayers. / <p>QC 20170210</p>

<p>Due to the constantly decreasing dimensions of electronic devices, the conventional dielectric material in transistors and capacitors, SiO₂, has to be replaced by a material with higher dielectric constant. Some of the most promising candidates are tantalum oxide,Ta₂O₅, zirconium oxide, ZrO₂ and hafnium oxide, HfO₂.</p><p>This thesis describes new chemical vapour deposition (CVD) and atomic layer deposition (ALD) processes for deposition of Ta₂O₅, ZrO₂ and HfO₂ using the metal iodides as starting materials. The layer-by-layer growth in ALD was also studied in real time with a quartz crystal microbalance (QCM) to examine the process characteristics and to find suitable parameters for film deposition.</p><p>All the processes presented here produced high-purity films at low deposition temperatures. It was also found that films deposited on Pt substrates generally crystallise at lower temperature, or with lower thickness, than on silicon and single-crystalline oxide substrates. Films grown on MgO(001) and α-Al₂O₃(001) substrates were strongly textured or epitaxial. For example, monoclinic HfO₂ deposited on MgO(001) were epitaxial for deposition temperatures of 400-500 C in ALD and 500-600 C in CVD. Electrical characterisation showed that the crystallinity of the films had a strong effect on the dielectric constant, except in cases of very thin films, where the dielectric constant was more dependent on layer thickness.</p>

<p>Bismuth titanate Bi₄Ti₃O₁₂, is one of the bismuth based layered ferroelectric materials that is a candidate for replacing the lead based ferroelectric materials in for instance non-volatile ferroelectric random access memories (FRAM). This is due to the fact that the bismuth based ferroelectrics consists of pseudo perovskite units sandwiched in between bismuth oxide layers, which gives them a better fatigue nature.</p><p>In this thesis thin films of Bi₄Ti₃O₁₂have been deposited by chemical vapour deposition (CVD) using the metal iodides, BiI₃ and TiI₄ as precursors. Films grown on MgO(001) substrates were found to grow epitaxially. The electrical properties were determined for films grown on Pt-coated silicon and good properties such as a high dielectric constant (ε) of 200, low <i>tan</i> δ of 0.018, a remnant polarisation (<i>P</i>_r) of 5.3 μC/cm² and coercive field (E_c) as high as 150 kV/cm were obtained. Thin films in the Bi-Ti-O system were also deposited by atomic layer deposition (ALD) using metalorganic precursors.</p><p>In addition to the ternary bismuth titanates, films in the binary oxide systems <i>i.e.</i> bismuth oxides and titanium oxides were deposited. Epitaxial TiO₂ films were deposited both by CVD and ALD using TiI₄ as precursor. The rutile films deposited by ALD were found to grow epitaxially down to a temperature of at least 375 ¢ªC on α-A1₂O₃(0 1 2) substrates. The TiO₂ ALD process was also studied <i>in-situ</i> by QCM. Different bismuth oxides were deposited by halide-CVD using BiI₃ as precursor on MgO(0 0 1) and SrTiO₃(0 0 1) substrates and the results were summarised in an experimental CVD stability diagram. The Bi₂O_2.33 phase was found to grow epitaxially on both substrates.</p>

This thesis concerns the development of surface ligation techniques for the preparation of carbohydrate biosensors. Several methodologies were developed based on efficient photochemical insertion reactions which quickly functionalize polymeric materials, with either carbohydrates or functional groups such as alkynes or alkenes. The alkyne/alkene surfaces were then treated with carbohydrate azides or thiols and reacted under chemoselective Cu-catalyzed azide-alkyne cycloaddition (CuAAC) or photo-radical thiol-ene/yne click chemistry, thus creating a range of carbohydrate biosensor surfaces under ambient conditions. The methodologies were evaluated by quartz crystal microbalance (QCM) and surface plasmon resonance (SPR) flow through instrumentations with recurring injections of a range of lectins, allowing for real-time analysis of the surface interactions. The developed methods were proven robust and versatile, and the generated carbohydrate biosensors showed high specificities and good capacities for lectin binding.  The methods were then used to investigate how varying the glycan linker length and/or a sulfur-linkage affect the subsequent protein binding. The survey was further explored by investigating the impact of sulfur in glycosidic linkages on protein binding, through competition assays with various O/S-linked disaccharides in solution interactions with lectins. / QC 20120309

Bismuth titanate Bi4Ti3O12, is one of the bismuth based layered ferroelectric materials that is a candidate for replacing the lead based ferroelectric materials in for instance non-volatile ferroelectric random access memories (FRAM). This is due to the fact that the bismuth based ferroelectrics consists of pseudo perovskite units sandwiched in between bismuth oxide layers, which gives them a better fatigue nature. In this thesis thin films of Bi4Ti3O12 have been deposited by chemical vapour deposition (CVD) using the metal iodides, BiI3 and TiI4 as precursors. Films grown on MgO(001) substrates were found to grow epitaxially. The electrical properties were determined for films grown on Pt-coated silicon and good properties such as a high dielectric constant (ε) of 200, low tan δ of 0.018, a remnant polarisation (Pr) of 5.3 μC/cm2 and coercive field (Ec) as high as 150 kV/cm were obtained. Thin films in the Bi-Ti-O system were also deposited by atomic layer deposition (ALD) using metalorganic precursors. In addition to the ternary bismuth titanates, films in the binary oxide systems i.e. bismuth oxides and titanium oxides were deposited. Epitaxial TiO2 films were deposited both by CVD and ALD using TiI4 as precursor. The rutile films deposited by ALD were found to grow epitaxially down to a temperature of at least 375 ¢ªC on α-A12O3(0 1 2) substrates. The TiO2 ALD process was also studied in-situ by QCM. Different bismuth oxides were deposited by halide-CVD using BiI3 as precursor on MgO(0 0 1) and SrTiO3(0 0 1) substrates and the results were summarised in an experimental CVD stability diagram. The Bi2O2.33 phase was found to grow epitaxially on both substrates.

Due to the constantly decreasing dimensions of electronic devices, the conventional dielectric material in transistors and capacitors, SiO2, has to be replaced by a material with higher dielectric constant. Some of the most promising candidates are tantalum oxide,Ta2O5, zirconium oxide, ZrO2 and hafnium oxide, HfO2. This thesis describes new chemical vapour deposition (CVD) and atomic layer deposition (ALD) processes for deposition of Ta2O5, ZrO2 and HfO2 using the metal iodides as starting materials. The layer-by-layer growth in ALD was also studied in real time with a quartz crystal microbalance (QCM) to examine the process characteristics and to find suitable parameters for film deposition. All the processes presented here produced high-purity films at low deposition temperatures. It was also found that films deposited on Pt substrates generally crystallise at lower temperature, or with lower thickness, than on silicon and single-crystalline oxide substrates. Films grown on MgO(001) and α-Al2O3(001) substrates were strongly textured or epitaxial. For example, monoclinic HfO2 deposited on MgO(001) were epitaxial for deposition temperatures of 400-500 C in ALD and 500-600 C in CVD. Electrical characterisation showed that the crystallinity of the films had a strong effect on the dielectric constant, except in cases of very thin films, where the dielectric constant was more dependent on layer thickness.

El conocimiento de las interacciones entre célula/proteína/biomaterial es fundamental para la ingeniería de superficies debido a las numerosas aplicaciones biomédicas y biotecnológicas que se están desarrollando así como al éxito clínico que han alcanzado muchos implantes. La respuesta biológica final inducida por los implantes está fuertemente influenciada por las interacciones superficiales entre los componentes biológicos y el material sintético. Las propiedades físicas y químicas de la superficie de un biomaterial, en lugar de las propiedades en su masa, influyen directamente en la capa de proteínas que se adsorben sobre el biomaterial y, como consecuencia de ello, en la respuesta celular a la misma, tanto in vitro como in vivo.El objetivo de esta tesis doctoral es profundizar en el conocimiento de las interacciones material-biosistema, con el énfasis en el descubrimiento de relaciones entre las propiedades superficiales de las superficies de titanio y su respuesta biológica in vitro.El titanio comercialmente puro (Ti c.p.) está siendo ampliamente utilizado con éxito durante muchos años como biomaterial para implantes en cirugía ósea. Su excelente biocompatibilidad se basa en sus adecuadas propiedades mecánicas y, con mayor importancia, en su excelente resistencia a la corrosión. Esta última se debe principalmente a la formación espontanea de una fina película de óxido de titanio que le confiere protección natural contra los ataques degradativos. La modificación de la topografía de la superficie del titanio ha sido objeto de investigación en el pasado con el fin de mejorar la osteointegración. El granallado de partículas es una de las tecnologías más utilizadas para conferir rugosidad a las superficies del titanio. La rugosidad óptima y el tipo de partículas abrasivas del granallado para una respuesta óptima in vitro e in vivo fue previamente determinada en nuestro laboratorio. Sin embargo, todavía están por determinar cuáles son las causas últimas que llevan al biomaterial a su exitosa respuesta biológica.En este trabajo se han estudiado superficies pulidas y rugosas de Ti c.p. obtenidas mediante el granallado con partículas abrasivas de diferente composición química(Al2O3 y SiC) y diferentes tamaños (212-300&#956;m; 425-600&#956;m; 1000-1400&#956;m). La completa caracterización de las propiedades física y química de la superficie, incluyendo la rugosidad, la composición química, la mojabilidad/energía libre y la carga eléctrica de las superficies ensayadas ha llevado a una serie de relevantes conclusiones. Entre ellas, cabe destacar que a) la composición química de las partículas de granallado, así como el método de esterilización fueron los principales factores que influyeron en la mojabilidad y la energía libre superficial de las superficies de titanio estudiadas, b) el método de esterilización cambió en la energía superficial el carácter de donante de electrones de las superficies mediante el cambio de la cantidad y la naturaleza de las sustancias adsorbidas, y c) la composición química de las partículas de granallado no influyó en la carga eléctrica a pH fisiológico ni en el punto isoeléctrico de las superficies.Un segundo paso consistió en el uso de una microbalanza de cristal de cuarzo con monitorización de la energía de disipación, para el estudio de la cinética de adsorción (cantidad y conformación) y de los procesos de adsorción competitiva de tres proteínas de especial interés en los procesos de curación del hueso - la albúmina de suero bovino (BSA), el fibrinógeno (Fbg), y la fibronectina (Fn)- en sensores lisos recubiertos de TiO2. Se determinaron diferentes modelos de procesos de adsorción con una, dos o múltiples pasos distinguibles en función de las proteínas en solución. La capa adsorbida de BSA mostró los cambios más significativos en sus propiedades mecánicas, de conformación y de incorporación de agua hasta que se alcanzaron las condiciones estables de adsorción de proteínas. La BSA, la más pequeña de las proteínas ensayadas, desplazó la Fn y el Fbg cuando se ensayó en condiciones de la competencia por la adsorción, indicando su mayor afinidad por las superficies de TiO2. También se emplearon técnicas de marcaje fluorescente para el estudio de la adsorción proteica en superficies rugosas granalladas. En este estudio, por un parte, se pudo determinar que la cantidad de Fn y BSA adsorbidas en las superficies granalladas está directamente correlacionada con su energía superficial. Por otra parte, se visualizó la adsorción de fibronectina en solución sobre muestras granalladas rugosas de Ti. La Fn formó un patrón irregular de adsorción con una mayor cantidad de proteína adsorbida en los picos que en los valles de la topografía.También se evaluó la organización espacial de la matriz extracelular de los osteoblastos, ECM, sobre superficies de Ti lisas y rugosas por medio de la visualización de las fibrillas de Fn teñidas con marcador fluorescente. Las células osteoblásticas depositaron las fibrillas de Fn con un determinado patrón organizado dentro de la matriz total secretada. Aparecen como una película que cubre la parte superior de las diferentes superficies rugosas de titanio. Un resultado relevante es que el espesor de esta capa aumentó con la rugosidad de la topografía subyacente. Sin embargo no más de la mitad de la máxima distancia pico-valle se cubrió con la proteína secretada y/o reorganizada.Por último, teniendo en cuenta las diferencias en la organización de la ECM y laadsorción de Fn en las superficies ensayadas de Ti, se realizó un estudio de qRT-PCR para determinar la influencia de las propiedades superficiales del titanio, con y sin preadsorción de Fn, en la respuesta osteoblástica. La expresión génica de la subunidad &#61537;5 de la integrina celular, como marcador de la adhesión celular, se incrementó en las superficies granalladas con SiC en comparación con las granalladas con alúmina. Este resultado fue correlacionado con la mayor cantidad de Fn adsorbida debido a la mayor energía superficial de las superficies granalladas con SiC. El aumento de la rugosidad, así como la presencia de partículas de alúmina en las superficies rugosas incrementó la actividad de ALP y la expresión génica de ALP mRNA por los osteoblastos, y por lo tanto su diferenciación. / The understanding of cell/protein/biomaterial interactions is critical to the engineering of substrates for numerous biomedical and biotechnological applications and to the clinical success of implants. The final biological response induced by implants is strongly influenced by the biological-components/synthetic-material surface interactions. It is well accepted that the physical and chemical surface properties of a biomaterial rather than its bulk properties will influence the protein adlayer and then the cell response to it, both in vitro and in vivo.The aim of this PhD thesis is to gain an increased understanding of the materialbiosystem interactions, with an emphasis on establishing correlations between surface properties of titanium surfaces and its in vitro biological response.Commercially pure titanium (c.p. Ti) is being widely and successfully used implant biomaterial in bone surgery over many years. Its excellent biocompatibility is based in its appropriate mechanical properties and, more importantly, in its excellent corrosion resistance, which is mainly due to the presence of a naturally-occurring thin protective titanium oxide film. Modification of titanium surface topography has been a subject of research in the past with the purpose of improving its osseointegration. Grit blasting is one of the most used technologies to roughen titanium surfaces for this purpose. The optimal roughness and type of abrasive blasting-particles for a better in vitro and in vivo response was previously determined in our lab. However, which and how different relevant surface properties of the blasted titanium surfaces induce that optimal biological behavior is still poorly understood.Smooth/polished and rough c.p. Ti surfaces obtained by blasting with abrasiveparticles of different chemical composition (Al2O3 and SiC) and different sizes (212-300&#956;m; 425-600&#956;m; 1000-1400&#956;m) were studied. The comprehensive characterization of physical and chemical surface properties, including roughness, chemical composition, wettability/free energy and electrical charge of the tested surfaces led to a series of relevant conclusions. Among them, it is worth noting that a) the chemical composition of the grit-blasting particles as well as the method of sterilization were found the main factors influencing wettability and surface free energy of the titanium surfaces; b) the sterilization method changed the electron donor character of the surfaces by changing the amount/nature of physisorbed substances on the surfaces, and c) the chemical composition of the blasting particles did not influence on the electrical charge at physiological pH and the isoelectric point of the surfaces.A second step consisted in the use of a quartz crystal microbalance with monitoring of the energy dissipation to study the adsorption kinetics (amount and conformation) and adsorption competition processes of three proteins of special interest in the healing processes of bone -bovine serum albumin (BSA), fibrinogen (Fbg), and fibronectin (Fn)-on smooth TiO2-coated sensors. Different patterns of adsorption with processes in one, two or multiple distinguishable steps were determined depending of the protein in solution. The BSA adlayers showed the most significant changes in their mechanical properties/conformation/incorporation of water until steady protein-adsorption conditions were reached. BSA, the smallest of the tested proteins, displaced Fn and Fbg when in competition for adsorption, which is an indication of its higher affinity for TiO2 surfaces. Fluorescent labelling techniques where used to study protein adsorption on blasted rough surfaces. Most significantly, the amount of Fn and BSA adsorbed on blasted surfaces was positively correlated with their surface energy. The adsorption of fibronectin from solution on shot-blasted rough titanium surfaces resulted in an irregular pattern of adsorption with a higher amount of protein adsorbed on peaks than on valleys of the topography.Further, the spatial organization of the osteoblast extracellular matrix, ECM, on smooth and rough Ti surfaces was evaluated by visualizing fluorescently-stained Fn-fibrils. Osteoblast-like cells deposited Fn- fibrils in a specific facet-like pattern that was organized within the secreted total matrix. It appeared as a film overlying the top of the different rough titanium surfaces. Interestingly, the thickness of this layer increased with the roughness of the underlying topography, but no more than half of the total maximum peak-to-alley distance was covered.Finally, taking into consideration the differences in ECM organization and Fn adsorption on the tested Ti surfaces a qRT-PCR study was carried out to elucidate the influence of titanium surface properties with and without Fn-precoatings on the osteoblast response. The expression of &#61537;5 integrin subunit gene, as a marker for cell adhesion, was increased in SiC-blasted surfaces compared to alumina-blasted surfaces. This was related to the higher amount of adhesive-protein Fn adsorbed caused by the higher surface energy of SiC-blasted surfaces. The increase of roughness as well as the presence of alumina particles on blasted surfaces increased ALP activity and ALP mRNA gene expression by osteoblasts, and so their differentiation.This research work contribute to increase our knowledge on the interactions taking place at the bio/non-bio interface between different biological components -water, proteins, cells- and materials of clinical relevance, such as rough titanium. Theintertwined effects of the different properties of the synthetic surfaces appear as a challenge to unravel the ultimate causes that determine the fate of cells on synthetic biomaterials.

A fundamental characterization of hexafluoroalcohol substituted polynorbornene (HFAPNB) was completed to improve the final photoresist formulation using these materials. In this work, it was found that the dissolution behavior of these materials was controlled by the ability of polymer chains to form hydrogen bonds. This ability to form interchain hydrogen bonds was affected by stereochemical changes in the polynorbornene backbone as molecular weights increase. These observed changes in backbone polynorbornene stereochemistry were accurately modeled using the "helix-kink" theory, first described by Ahmed and Ludovice. It was found that several material properties altered the interchain hydrogen bonding within these materials, such as the polydispersity, polymerization catalyst, and the polymer film thickness. However, none of these material properties altered the unusual dissolution behavior observed in these materials. To improve the potential formulation of these materials, the interactions between HFAPNB and resist additives were studied. For all tested photoacid generators, it was found that some interchain hydrogen bonding occurred between resist additive molecules and HFA side groups, which retarded the dissolution rate in the formulated material. In particular, one can create a simple resist using unprotected HFAPNB polymer with an iodonium photoacid generator. Finally, a series of norbornene oligomers were evaluated as potential dissolution inhibitors for HFAPNB. It was found that the dissolution rate of HFAPNB can be completely inhibited with dissolution inhibitors at a loading of 15%.

Interfacial features of polymers are a complex, fascinating topic, and industrially very important. There is clearly a need to understand interactions between polymer layers as they can be used for controlling surface properties, colloidal stability and lubrication. The aim of my Ph.D study was to investigate fundamental phenomena of polymers at interfaces, covering adsorption, interactions between polymer layers and surfactants, surface forces and friction between adsorbed layers. A branched brush layer with high water content was formed on silica surfaces by a diblock copolymer, (METAC)m-b-(PEO45MEMA)n, via physisorption. The adsorption properties were determined using several complementary methods. Interactions between pre-adsorbed branched brush layers and the anionic surfactant SDS were investigated as well. Surface forces and friction between polymer layers in aqueous media were investigated by employing the Atomic Force Microscopy (AFM) colloidal probe technique. Friction forces between the surfaces coated by (METAC)m-b-(PEO45MEMA)n in water are characterized by a low friction coefficient. Further, the layers remain intact under high load and shear, and no destruction of the layer was noted even under the highest pressure employed, about 50 MPa. Interactions between polymer layers formed by a temperature responsive diblock copolymer, PIPOZ60-b-PAMPTMA17 (phase transition temperature of 46.1 °C), was investigated in the temperature interval 25-50 °C by using the AFM colloidal probe technique. Friction between the layers increases with increasing temperature (25-45 °C), while at 50 °C friction was found to be slightly lower than that at 45 °C. We suggest that this is due to decreased energy dissipation caused by PIPOZ chains crystallizing in water above the phase transition temperature. The structure of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers was determined by X-ray reflectometry. Surface forces and friction between DPPC bilayer-coated silica surfaces were measured utilizing the AFM colloidal probe technique. Our study showed that DPPC bilayers are able to provide low friction forces both in the gel (below ≈ 41°C) and in the liquid crystalline state (above ≈ 41°C). However, the load bearing capacity is lower in the gel state. This is attributed to a higher rigidity and lower self-healing capacity of the DPPC bilayer in the gel state. Friction forces in single asperity contact acting between a micro-patterned silicon surface and an AFM tip was measured in air. We found that both nanoscale surface heterogeneities and the µm-sized depressions affect friction forces, and considerable reproducible variations were found along a particular scan line. Nevertheless, Amontons’ first rule described average friction forces reasonably well. Amontons’ third rule and Euler’s rule were found to be less applicable to our system. / <p>QC 20141209</p>

The overall thrust of this project is to gain an insight into a class of surface-tethered cross-linked thin films of poly(N-alkylacrylamides) that display a lower critical solution temperature (LCST).The structure of the alkyl group and the modification of the amide groups determine the LCST and resultant volume-phase transition behavior. The aim of this study involves synthesis and characterization of thin films and to correlate the volume-transition behavior to the structure of the alkyl group. For better understanding the volume-transition behavior, the polymer films are perturbed by the Hofmeister salt series to examine trends between different alkyl groups. While most of the studies have been done with bulk gels, the majority of the applications require the use of gels at surfaces and interfaces. Surface attached polymer networks provide an alternative to bulk gels showing superior response times, thus efficiency. Hence it is significant to understand the impact of confinement on the phase transition behavior of a polymer network. Anchoring a polymer network to a surface produces volume phase transition perpendicular to the substrate. The parallel swelling and collapse of the network is highly restricted due to lateral confinement, thus impacting properties such as structure, mechanical properties, dynamics and permeability of the network. Several studies have been done with poly(N-isopropylacrylamide) anchored to a substrate, which have shown significantly different behavior than unconstrained networks. Notable examples include a gradual as opposed to a sharp volume-phase transition, and significantly less swelling above and below the LCST. These studies only looked at poly(NIPAAm); therefore it remains unknown if these results are universal and will apply to other LCST polymers. Hence, we expanded upon these studies to also investigate a library of different LCST polymers belonging to the category of N-alkylacrylamides. I have synthesized the copolymers comprising of N-alkylacrylamides and methacryloxybenzophenone (MaBP). The benzophenone moiety in MaBP is photoreactive, allowing us to cross-link the copolymers by UV irradiation. Surface attached thin films were fabricated by spin coating the solution of copolymers and cross-linking by UV irradiation. The volume phase transitions of the coatings were studied under the influence of temperature and the salts of the Hofmeister series. Information concerning the state of responsive layers, the precise temperature at which the collapse occurs, and the changes in the molecular environment during the transition were investigated by ellipsometry and ATR-FTIR. In a longer perspective, understanding the transition behavior and the influence of salts governing this transition provides a better understanding of the interactions of biopolymers in natural systems.