1 |
Smart Journal Bearing with Controllable Radial Clearance, Design and AnalysisFarkhondeh, Shahrbanoo 21 June 2017 (has links)
No description available.
|
2 |
クリアランス内で衝突を伴うロータの非線形強制振動と自励振動 (1/2次分数調波共振付近の引込現象と結合振動)稲垣, 瑞穂, INAGAKI, Mizuho, 石田, 幸男, ISHIDA, Yukio, 早川, 誠, HAYAKAWA, Makoto, 安田, 聡, YASUDA, Satoshi 08 1900 (has links)
No description available.
|
3 |
Vliv montážní vůle u radiálního kuličkového ložiska na napjatost a deformaci / The assembly gap influence on the stress and strain at the radial ball bearingRašovská, Hana January 2013 (has links)
This master thesis deals with the influence of assembly clearance on strain and stress in the radial ball bearing. The theme of this thesis was commissioned by ZKL - Research and development, a. s. For six different assembly clearances and selected ball bearing was made force-loaded static analysis of global computational models. Subsequently was made a static analysis of local computational models loaded by strain according to the results of global models. The output of analysis of local models was sizes of stress, which led to the analysis of bearing with two other models of material. For the solution of the problem was used pre/post processor Patran and solver MSC.Marc.
|
4 |
クリアランス内で衝突を伴うロータの非線形強制振動と自励振動 (非線形ばね・減衰モデルによる分数調波振動の解析)稲垣, 瑞穂, INAGAKI, Mizuho, 石田, 幸男, ISHIDA, Yukio, 林, 晃正, HAYASHI, Akimasa 07 1900 (has links)
No description available.
|
5 |
Simulação do escoamento bifásico da mistura óleo-refrigerante através da folga radial de compressores rotativos de pistão rolante /Ferreira, Adriano Domingos. January 2006 (has links)
Orientador: José Luiz Gasche / Banca: André Luiz Seixlack / Banca: Paulo Eduardo Lopes Barbieri / Resumo: Devido à solubilidade mútua entre o fluido refrigerante e o fluido lubrificante usados em sistemas de refrigeração por compressão de vapor, eles formam uma mistura homogênea que influencia tanto os processos de transferência de calor no evaporador e no condensador, como os processos de lubrificação e de selagem de vazamentos no interior do compressor. O vazamento de refrigerante através da folga radial de compressores rotativos de pistão rolante é de particular importância para o bom desempenho do compressor, uma vez que ele influencia significativamente a eficiência volumétrica do compressor, chegando a somar cerca de 30% das perdas totais de refrigerante. No presente trabalho foram desenvolvidos modelos de escoamento de misturas óleo-refrigerante através desta folga, incluindo a mudança de fase do refrigerante devida à variação da sua solubilidade no lubrificante. A solução da equação da energia constitui uma evolução do processo de modelagem deste escoamento em relação aos modelos até então desenvolvidos. Quatro modelos diferentes foram usados para simular o escoamento: modelo de escoamento bifásico homogêneo isotérmico, modelo de escoamento bifásico isotérmico com formação de espuma, modelo de escoamento bifásico homogêneo não-isotérmico e modelo de escoamento bifásico homogêneo não-isotérmico com termo de força inercial. O estudo foi realizado para três misturas óleo-refrigerante: óleo éster Freol a10 e refrigerante R134a, óleo éster EMKARATE RL10H e refrigerante R134a e óleo mineral SUNISO 1 GS e refrigerante R12. Para todos os modelos e misturas, realizou-se um estudo paramétrico envolvendo as principais variáveis do problema: pressão de entrada, temperatura de entrada, vazão de mistura e valor da folga mínima... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Due to the mutual solubility between the refrigerant and lubricant of refrigeration systems using mechanical compression of vapor, they form a homogeneous mixture which influences the heat transfer processes in the evaporator and condenser as well as the compressor lubrication and refrigerant leakage. The refrigerant leakage through the radial clearance of rolling piston compressors plays an important role to the volumetric efficiency in this type of compressor, in which it represents about 30% of the total refrigerant loss. In the present work several models to predict the lubricant-refrigerant mixture flow through this clearance, including the refrigerant phase change due to the reduction of the refrigerant solubility in the lubricant, are developed. Four different models were developed to simulate the flow: isothermal homogeneous two-phase flow, isothermal two-phase flow with foam formation, non-isothermal homogeneous two-phase flow and non-isothermal homogeneous two-phase flow containing inertial force. The simulations were performed for three mixtures: ester oil Freol a10-refrigerant R134a, ester oil EMKARATE RL10H-refrigerant R134a, and mineral oil SUNISO 1 GS-refrigerant R12. The influences of the inlet pressure, inlet temperature, mixture mass flow rate, and minimal clearance were analyzed for all mixtures. The results showed that it is important to consider the foam formation, the inertial force, and the solution of the energy equation in the flow modeling. Concerning the volumetric efficiency of the compressor the ester oil Freol a10-R134a was the best mixture because it produced the lowest refrigerant leakage. / Mestre
|
6 |
Vliv podstatných parametrů na velikost radiální vůle a deformačně napěťové stavy v kuličkovém ložisku / Influence of essential parameters on the radial clearance and stress-strain states in ball bearingsŠperka, Václav January 2014 (has links)
Master thesis is focused on the research of influence of selected substantial parameters on stress – strain states in the deep groove radial ball bearing. The influence of radial load is analyzed, such as the influence of size of the bearing and row of the bearing, also influence of radial clearance is quantified. Next, the influence of thermal distribution in the bearing is analyzed for different combinations of thermal distributions and radial clearances. Conclusions from analyses are then used in the last task – suggestion of radial clearance for customer – specified assembly. Problem is solved using the finite element method (FEM) in pre/post processor MSC.Patran and solver MSC.Marc. To make analyses faster the substantial parameters are implemented in the algorithm for automatic generation of the bearing calculation (batch file).The theme of this thesis was commissioned by ZKL - Research and development, a. s.
|
7 |
Simulação do escoamento bifásico da mistura óleo-refrigerante através da folga radial de compressores rotativos de pistão rolanteFerreira, Adriano Domingos [UNESP] 27 November 2006 (has links) (PDF)
Made available in DSpace on 2014-06-11T19:23:39Z (GMT). No. of bitstreams: 0
Previous issue date: 2006-11-27Bitstream added on 2014-06-13T18:10:04Z : No. of bitstreams: 1
ferreira_ad_me_ilha.pdf: 1079421 bytes, checksum: dcb82443da323ec46bf3bd207a17001c (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Devido à solubilidade mútua entre o fluido refrigerante e o fluido lubrificante usados em sistemas de refrigeração por compressão de vapor, eles formam uma mistura homogênea que influencia tanto os processos de transferência de calor no evaporador e no condensador, como os processos de lubrificação e de selagem de vazamentos no interior do compressor. O vazamento de refrigerante através da folga radial de compressores rotativos de pistão rolante é de particular importância para o bom desempenho do compressor, uma vez que ele influencia significativamente a eficiência volumétrica do compressor, chegando a somar cerca de 30% das perdas totais de refrigerante. No presente trabalho foram desenvolvidos modelos de escoamento de misturas óleo-refrigerante através desta folga, incluindo a mudança de fase do refrigerante devida à variação da sua solubilidade no lubrificante. A solução da equação da energia constitui uma evolução do processo de modelagem deste escoamento em relação aos modelos até então desenvolvidos. Quatro modelos diferentes foram usados para simular o escoamento: modelo de escoamento bifásico homogêneo isotérmico, modelo de escoamento bifásico isotérmico com formação de espuma, modelo de escoamento bifásico homogêneo não-isotérmico e modelo de escoamento bifásico homogêneo não-isotérmico com termo de força inercial. O estudo foi realizado para três misturas óleo-refrigerante: óleo éster Freol a10 e refrigerante R134a, óleo éster EMKARATE RL10H e refrigerante R134a e óleo mineral SUNISO 1 GS e refrigerante R12. Para todos os modelos e misturas, realizou-se um estudo paramétrico envolvendo as principais variáveis do problema: pressão de entrada, temperatura de entrada, vazão de mistura e valor da folga mínima... / Due to the mutual solubility between the refrigerant and lubricant of refrigeration systems using mechanical compression of vapor, they form a homogeneous mixture which influences the heat transfer processes in the evaporator and condenser as well as the compressor lubrication and refrigerant leakage. The refrigerant leakage through the radial clearance of rolling piston compressors plays an important role to the volumetric efficiency in this type of compressor, in which it represents about 30% of the total refrigerant loss. In the present work several models to predict the lubricant-refrigerant mixture flow through this clearance, including the refrigerant phase change due to the reduction of the refrigerant solubility in the lubricant, are developed. Four different models were developed to simulate the flow: isothermal homogeneous two-phase flow, isothermal two-phase flow with foam formation, non-isothermal homogeneous two-phase flow and non-isothermal homogeneous two-phase flow containing inertial force. The simulations were performed for three mixtures: ester oil Freol a10-refrigerant R134a, ester oil EMKARATE RL10H-refrigerant R134a, and mineral oil SUNISO 1 GS-refrigerant R12. The influences of the inlet pressure, inlet temperature, mixture mass flow rate, and minimal clearance were analyzed for all mixtures. The results showed that it is important to consider the foam formation, the inertial force, and the solution of the energy equation in the flow modeling. Concerning the volumetric efficiency of the compressor the ester oil Freol a10-R134a was the best mixture because it produced the lowest refrigerant leakage.
|
Page generated in 0.0742 seconds