Spelling suggestions: "subject:"receiver""
1 |
Die rechtliche Stellung des Zwangsverwalters /Heller, Karl. January 1900 (has links)
Thesis (doctoral)--Universität Rostock.
|
2 |
Analysis of residual atmospheric delay in the low latitude regions using network-based GPS positioningMusa, Tajul Ariffin, Surveying & Spatial Information Systems, Faculty of Engineering, UNSW January 2007 (has links)
The atmosphere in low latitude regions is of particular interest to GPS researchers because the propagation of GPS signals becomes significantly delayed compared with other regions of the world. Hence this limits GPS positioning accuracy in equatorial regions. Although the atmospheric delay can be modelled, a residual component will still remain. Reducing, or mitigating the effect of residual atmospheric delay is of great interest, and remains a challenge, especially in equatorial regions. Analysis of relative positioning accuracy of GPS baselines has confirmed that the residual atmospheric delay is distance-dependent, even in low latitude areas. Residual ionospheric delay is the largest component in terms of both absolute magnitude and variability. However it can be largely eliminated by forming the ionosphere-free combination of measurements made on two frequencies. The residual tropospheric delay is smaller in magnitude but rather problematic due to strong spatio-temporal variations of its wet component. Introducing additional troposphere ???scale factors??? in the least squares estimation of relative position can reduce the effect of the residual. In a local GPS network, the distance-dependent errors can be spatially modelled by network-based positioning. The network-based technique generates a network ???correction??? for user positioning. The strategy is to partition this network correction into dispersive and non-dispersive components. The latter can be smoothed in order to enhance the ionosphere-free combination, and can be of benefit to ambiguity resolution. After this step, both the dispersive and non-dispersive correction components can be used in the final positioning step. Additional investigations are conducted for stochastic modelling of network-based positioning. Based on the least squares residuals, the variance-covariance estimation technique can be adapted to static network-based positioning. Moreover, a two-step procedure can be employed to deal with the temporal correlation in the measurements. Test results on GPS networks in low latitude and mid-latitude areas have demonstrated that the proposed network-based positioning strategy works reasonably well in resolving the ambiguities, assisting the ambiguity validation process and in computing the user???s position. Furthermore, test results of stochastic modelling in various GPS networks suggests that there are improvements in validating the ambiguity resolution results and handling the temporal correlation, although the positioning result do not differ compared to using the simple stochastic model typically used in standard baseline processing.
|
3 |
Analysis of residual atmospheric delay in the low latitude regions using network-based GPS positioningMusa, Tajul Ariffin, Surveying & Spatial Information Systems, Faculty of Engineering, UNSW January 2007 (has links)
The atmosphere in low latitude regions is of particular interest to GPS researchers because the propagation of GPS signals becomes significantly delayed compared with other regions of the world. Hence this limits GPS positioning accuracy in equatorial regions. Although the atmospheric delay can be modelled, a residual component will still remain. Reducing, or mitigating the effect of residual atmospheric delay is of great interest, and remains a challenge, especially in equatorial regions. Analysis of relative positioning accuracy of GPS baselines has confirmed that the residual atmospheric delay is distance-dependent, even in low latitude areas. Residual ionospheric delay is the largest component in terms of both absolute magnitude and variability. However it can be largely eliminated by forming the ionosphere-free combination of measurements made on two frequencies. The residual tropospheric delay is smaller in magnitude but rather problematic due to strong spatio-temporal variations of its wet component. Introducing additional troposphere ???scale factors??? in the least squares estimation of relative position can reduce the effect of the residual. In a local GPS network, the distance-dependent errors can be spatially modelled by network-based positioning. The network-based technique generates a network ???correction??? for user positioning. The strategy is to partition this network correction into dispersive and non-dispersive components. The latter can be smoothed in order to enhance the ionosphere-free combination, and can be of benefit to ambiguity resolution. After this step, both the dispersive and non-dispersive correction components can be used in the final positioning step. Additional investigations are conducted for stochastic modelling of network-based positioning. Based on the least squares residuals, the variance-covariance estimation technique can be adapted to static network-based positioning. Moreover, a two-step procedure can be employed to deal with the temporal correlation in the measurements. Test results on GPS networks in low latitude and mid-latitude areas have demonstrated that the proposed network-based positioning strategy works reasonably well in resolving the ambiguities, assisting the ambiguity validation process and in computing the user???s position. Furthermore, test results of stochastic modelling in various GPS networks suggests that there are improvements in validating the ambiguity resolution results and handling the temporal correlation, although the positioning result do not differ compared to using the simple stochastic model typically used in standard baseline processing.
|
4 |
Wirelessly networked digital phased array design and analysis of A 2.4 GHZ demonstrator /Burgstaller, Gert. January 2006 (has links) (PDF)
Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, September 2006. / Thesis Advisor(s): David Jenn, Clark Robertson, Richard Adler. "September 2006." Includes bibliographical references (p. 103-107). Also available in print.
|
5 |
Modeling and performance analysis of GPS vector tracking algorithmsLashley, Matthew, Bevly, David M. Hung, John Y. January 2009 (has links)
Dissertation (Ph.D.)--Auburn University, 2009. / Abstract. Vita. Includes bibliographic references (p.294-302).
|
6 |
Very high speed photodetectorsPlatt, Simon Philip January 1990 (has links)
No description available.
|
7 |
The design and implementation of multigigabit post-detection filters for lightwave PPM systemsHussain, Abid January 1996 (has links)
No description available.
|
8 |
Performance of radar receivers in the presence of noise and intentional interferenceMavropoulos, Panagiotis G. 12 1900 (has links)
Approved for public release; distribution is unlimited / This thesis is devoted to analyzing the problem of masking a reflected radar signal,
in order to degrade the radar receiver's performance. This is to be accomplished by appropriately
choosing the Power Spectral Density (PSD) of a power constrained colored
noise interference to be generated either by the target itself or by pre-positioned
"friendly" noise makers. The goal in either case is to generate interference signals that
result in decreased receiver probability of detection, P(D), for a given receiver probability
of false alarm, P(F). Efforts to identify appropriate PSD's of the power constrained interference
were carried out by evaluating the receivers' P(D) as a function of P(F) for two
specific target models. The performance results for the various receivers investigated
demonstrate that the noise interference generated by the noise makers can achieve significant
levels of degradation, while the target generated noise interference tends to improve
rather than degrade the radar receiver's performance. In all cases considered, the
sine squared shaped noise interference PSD is more effective at degrading the receiver
performance than any other kind of PSD analyzed. / http://archive.org/details/performanceofrad00mavr / Captain, Hellenic Army
|
9 |
Demodulator techniques in satellite communication systems for direct broadcast systemsMarzolini, Remo G. A. January 1996 (has links)
This thesis is concerned with the FM demodulator techniques used in terrestrial TV receiver designs for Direct Broadcast Systems (DBS) from satellites. The various MAC/Packet schemes intended for DBS applications are described and the international standards that apply to them considered, with particular emphasis on the D2-MAC system. Noise in FM systems is discussed and a suitable threshold noise model is chosen for use in DBS TV demodulator systems. The characteristics of the various types of noise effects are considered in terms of their effect upon the TV picture. The threshold performance of a conventional FM demodulator for differing types of modulation is reviewed and it is shown how the threshold characteristic depends upon the nature of the modulation. The literature review carried out represents a significant component of the thesis and combines material from patent literature with more conventional source materials from professional journals, conferences, textbooks, etc. Some ten existing demodulator concepts that exhibit threshold extension characteristics are examined, and where relevant their potential performance in D2-MAC format systems is assessed. The demodulator characteristics that limit their performance in TV systems are identified. It is concluded that designing a threshold extension demodulator, with reliable operation, for all picture contents and for a wide range of input carrier-to-noise ratios, is a formidable task using existing design techniques. On the basis of this examination an adaptive threshold extension demodulator concept is proposed, that utilises information contained within the signal structure to achieve an improved performance over a wide range of input carrier-to-noise ratios and picture content. It is shown how the relevant signal structures may be derived from conventional (PAL, SECAM and NTSC), MAC format and all-digital television systems. Illustrations are given that show how the adaptive demodulator concept can be applied to certain existing threshold extension demodulators, enhancing their performance for television picture reception. Future trends in all-digital DBS TV systems intended ultimately for DBS applications are briefly discussed together with their demodlilation requirements.
|
10 |
Design of a fixed-point polar receiver for OFDM-based wireless LANAltamimi, Amro Faisal Mohammed 18 October 2011 (has links)
This thesis studies implementation-related issues in OFDM-based digital receivers, using the IEEE 802.11a WLAN standard as a specific wireless technology, where the data rate ranges from 6 Mbps to 54 Mbps. Our goal is to expose and exploit the possibility of scaling of the receiver computational complexity in relation to variable data rate requirements. To facilitate such computational scalability, we propose and evaluate the use of the polar coordinates during data processing in the frequency domain. We also evaluate the impact of various fixed-point precision settings during data processing in both the time domain and the frequency domain. We have found that for the 6-Mbps and 54-Mbps data rates the appropriate fixed-point word length should be 15 bits and 20 bits, respectively. While evaluating different fixed-point precision settings, we found that simulations times were prohibitively long. To address this issue, we also propose an alternative 5-step simulation procedure that significantly reduces the simulation time needed to evaluate any given fixed-point setting option. / Graduate
|
Page generated in 0.037 seconds