21 |
Characterization of Fiber Tapers for Fiber Devices and SensorsWang, Xiaozhen 26 September 2012 (has links)
Fiber tapers have attracted much attention and have been successfully employed in various applications, ranging from resonators, filters, interferometers to sensors. This thesis studies the properties of fiber tapers for the purpose of making tapered-based devices and sensors in aerospace related application where small size and light weight are critical. This thesis includes theoretical derivation and experimental verifications of distributed mode coupling in tapered single-mode fibers (SMFs) with high-resolution optical frequency-domain reflectometry (OFDR) technique. The studies are realized with OFDR through phase detection of a Mach-Zehnder interferometer (MZI), which measures local refractive index change relative to the reference arm. The wavelength shifts converted by the phase change give the group index differences between the fundamental mode and higher-order modes of fiber tapers. The energy re-distribution is observed in Rayleigh backscatter amplitude as a function of fiber length with a ~13µm resolution over the entire fiber taper, and group index difference between core and cladding modes is measured with a spatial resolution of ~2cm by using autocorrelation data processing. The thermal and mechanical properties of fiber tapers have also been characterized with OFDR. The cross-correlation wavelength shift is related to the refractive index change of the modes. It is shown that residual stress induced by the tapering process results in the inhomogeneous thermal property, which can be significantly reduced by an annealing treatment. A fiber taper with a waist diameter of ~6µm has a force sensitivity of ~620.83nm/N, ~500 times higher than that of SMF. Furthermore, polarization-preserving character of tapered polarization-maintaining fibers (PMFs) is evaluated by OFDR-based distributed birefringence along tapered PMFs. Three tapered-based micro-fiber devices have been used as effective mode selecting components to build narrow-linewidth tunable Erbium-doped fiber ring lasers. The fabrication is easy and at a low cost. 1) a tapered fiber tip forms multimode interference mechanism; 2) a two-taper MZI has been demonstrated by splitting/combining the fundamental mode and higher-order modes through fiber tapers and is tuned by bending one taper waist; 3) a novel tunable fiber Fabry-Perot filter, consisting of a hollow-core photonic bandgap fiber and a micro-fiber, is employed in the reflection mode.
|
22 |
Biomimetic floating lipid membranesDaulton, Emma January 2015 (has links)
No description available.
|
23 |
Interfacial Behaviour of Polyelectrolyte-Nanoparticle SystemsSennerfors, Therese January 2002 (has links)
No description available.
|
24 |
Characterization of Fiber Tapers for Fiber Devices and SensorsWang, Xiaozhen 26 September 2012 (has links)
Fiber tapers have attracted much attention and have been successfully employed in various applications, ranging from resonators, filters, interferometers to sensors. This thesis studies the properties of fiber tapers for the purpose of making tapered-based devices and sensors in aerospace related application where small size and light weight are critical. This thesis includes theoretical derivation and experimental verifications of distributed mode coupling in tapered single-mode fibers (SMFs) with high-resolution optical frequency-domain reflectometry (OFDR) technique. The studies are realized with OFDR through phase detection of a Mach-Zehnder interferometer (MZI), which measures local refractive index change relative to the reference arm. The wavelength shifts converted by the phase change give the group index differences between the fundamental mode and higher-order modes of fiber tapers. The energy re-distribution is observed in Rayleigh backscatter amplitude as a function of fiber length with a ~13µm resolution over the entire fiber taper, and group index difference between core and cladding modes is measured with a spatial resolution of ~2cm by using autocorrelation data processing. The thermal and mechanical properties of fiber tapers have also been characterized with OFDR. The cross-correlation wavelength shift is related to the refractive index change of the modes. It is shown that residual stress induced by the tapering process results in the inhomogeneous thermal property, which can be significantly reduced by an annealing treatment. A fiber taper with a waist diameter of ~6µm has a force sensitivity of ~620.83nm/N, ~500 times higher than that of SMF. Furthermore, polarization-preserving character of tapered polarization-maintaining fibers (PMFs) is evaluated by OFDR-based distributed birefringence along tapered PMFs. Three tapered-based micro-fiber devices have been used as effective mode selecting components to build narrow-linewidth tunable Erbium-doped fiber ring lasers. The fabrication is easy and at a low cost. 1) a tapered fiber tip forms multimode interference mechanism; 2) a two-taper MZI has been demonstrated by splitting/combining the fundamental mode and higher-order modes through fiber tapers and is tuned by bending one taper waist; 3) a novel tunable fiber Fabry-Perot filter, consisting of a hollow-core photonic bandgap fiber and a micro-fiber, is employed in the reflection mode.
|
25 |
Interfacial Behaviour of Polyelectrolyte-Nanoparticle SystemsSennerfors, Therese January 2002 (has links)
No description available.
|
26 |
Time domain transmission line measurements with the speedy delivery signalZugelter, Joseph Zachary 14 February 2012 (has links)
The Speedy Delivery (SD) waveform does not undergo dispersion in transmission lines. The waveform was first introduced by Dr. Robert Flake in US Patent 6,441,695 B1 issued on August 27, 2002. Use of the SD waveform allows for high precision time domain measurements on transmission lines. High precision time domain reflectometry (TDR) and time domain transmission (TDT) measurements are described. An example measurement is presented. The design of the experimental apparatus is detailed. Voltage bias adjustments are made during measurements to increase the repeatability. Voltage bias adjustments are examined in detail. Efforts to produce short terminated measurements with high precision are included. A technique for performing TDR measurements with highly attenuated signals is presented with results. / text
|
27 |
Development of time domain characterization methods for packaging structuresPannala, Sreemala 08 1900 (has links)
No description available.
|
28 |
Use of time domain reflectometry to monitor water content and electrical conductivity of saline soilEntus, Jonathan. January 2000 (has links)
Effective management of saline soils requires rapid, reliable methods of monitoring both soil water content (theta) and salt concentration, the latter measured in terms of electrical conductivity (sigma). This thesis examines estimation of theta, and bulk soil sigma (sigmaa) and soil water sigma (sigmaw), using time domain reflectometry (TDR). Calibration experiments were conducted in soil columns and in a vineyard that were irrigated with saline water. Within a theta range of 0.025--0.490 m3/m3, the correlation between TDR theta (thetaTDR) and gravimetrically determined theta (theta g) was high (r2 = 0.979 in soil columns, r2 = 0.836 in the field). The error of estimate of thetaTDR was 0.020 m3/m3 or less. Field thetaTDR estimates were sensitive to high salinity (sigmaw > 10 dS/m). Using a dual pathway parallel conductance (DPPC) model, sigma a was derived from sigmaw of saturated paste extracts and theta g. The correlation of TDR sigmaa to DPPC sigmaa was good in the laboratory (r2 = 0.915), and moderate in the field (r2 = 0.791), indicating a functional relationship between sigmaw and theta and TDR sigmaa. Models, to estimate sigmaw, were built by regression between paste extract sigma w and TDR sigmaa and thetaTDR. In a sigma w range of 3.0--23.4 dS/m in the columns, error of estimate of sigma w was small at 1.50 dS/m (+/-12.4% relative error range). In a sigma w range of 2.2--25.2 dS/m in the field, error of estimate of sigma w was 3.37 dS/m (+/-37% relative error range), which was significantly higher than the acceptable error range of +/-10%. ANOVA tests indicated that both TDR sigmaa and sigmaw·theta changed significantly with respect to the same sources of variance. Error in field estimates of sigmaw was associated with effects of salinity on thetaTDR and variability of soil conditions, particularly with respect to depth and time of sampling.
|
29 |
Effect of clay type and clay content on moisture content and bulk soil electrical conductivity as measured using time domain reflectometryLiaghat, Abdolmajid January 1993 (has links)
Time domain reflectometry (TDR) is becoming a widely used method to determine volumetric soil water content ($ theta$) and bulk soil electrical conductivity (EC$ sb{ rm a}$). It has been found that the $ theta$ and EC$ sb{ rm a}$ values obtained by this method, on certain soils, require calibration. The purpose of this study was to monitor the effects of soil texture (most particularly the clay type and clay content) on $ theta$ and EC$ sb{ rm a}$ estimated by TDR. / Water content was measured, gravimetrically and by TDR, on packed columns of nine soil mixtures, composed of three clay types (Hydrite, Bentonite, and Ste. Rosalie clay) and coarse sand at three levels (8, 16, and 30% by weight) of these clay materials. Three replicates of each mixture (a total of 27 columns) were made to statistically establish the effect of the clay type and the clay content on $ theta$ and EC$ sb{ rm a}$ readings by TDR. It was found that the TDR overestimated $ theta$ for the Hydrite and Ste. Rosalie (Natural) materials but accurately predicted for the Bentonite materials, compared to gravimetric determinations. / Bulk soil electrical conductivity was simultaneously measured by two independent techniques, TDR and 4-probe, on the same soils. It was found that the clay types and clay contents have almost equal effects on the EC$ sb{ rm a}$ as measured by TDR and 4-probe techniques. It was found that the estimated EC$ sb{ rm a}$ values obtained by TDR and 4-probe methods for the fine-textured Bentonite materials were lower than those for the Hydrite and Ste. Rosalie materials at equal $ theta$ and EC$ sb{ rm W}$ (electrical conductivity of soil water).
|
30 |
Monitoring the water content evolution of dikesRings, Jörg January 2008 (has links)
Zugl.: Karlsruhe, Univ., Diss., 2008 / Hergestellt on demand
|
Page generated in 0.0697 seconds