Le mécanisme d’épissage dans les organites est décrit comme étant l’ancêtre du spliceosome nucléaire. Cependant même si les protéines composant ce dernier sont bien connues, seulement quelques facteurs d’épissage ont été identifiés et caractérisés dans les chloroplastes et les mitochondries. Beaucoup de protéines ayant la faculté de se lier à l’ARN ont acquis des fonctions dans l’épissage, en effet un certain nombre de protéines sans véritable lien ont un rôle essentiel, avec différents degrés de spécificité dans l’épissage de la plupart des introns chloroplastiques chez les plantes. La plus grande famille de protéines se liant à l’ARN est la famille des protéines à domaines « pentatricopetide repeat » (PPR). Ces protéines sont impliquées dans la plupart des processus post-transcriptionnels dans les organites. En 2006, parmi les centaines de protéines PPR décrites chez les plantes, seulement une PPR avait été décrite comme nécessaire à l’épissage d’un intron. Ainsi, PPR4 est absolument et spécifiquement nécessaire pour l’épissage en trans de l’intron 1 de rps12 dans les plastes (Schmitz-Linneweber et al., 2006), suggérant que d’autres protéines PPR pourraient être impliquées dans l’épissage des ARN des organites. Le sujet de cette thèse porte sur la caractérisation d’autres protéines PPR impliquées dans ce processus. En utilisant des approches de génétique inverse et des outils mis en place dans le cadre de la thèse afin de détecter des défauts d’épissage par PCR quantitative, sept nouvelles PPRs impliquées dans l’épissage d’un certain nombre d’introns dans les plastes et les mitochondries ont pu être caractérisées. Dans l’optique de rechercher si des protéines PPR, impliquées dans l’épissage mais aussi dans l’édition des ARN, interagissent avec d’autres protéines, des approches de TAP-TAG ont été réalisées et sont également présentées dans ce manuscrit. L’identification de partenaires protéiques pour 3 PPRs impliquées, nous a ainsi permis de redessiner nos modèles et d’émettre de nouvelles hypothèses. Enfin, une dernière partie est consacrée à la découverte d’isoformes d’épissage pour des gènes PPR sans introns. Phénomène qui permettrait de réguler l’expression des gènes PPR, et/ou d’augmenter la diversité des protéines PPR. / The RNA splicing mechanism in organelles is described to be ancestral to that of the nuclear spliceosome. However, whereas this last complex is well known, only very few splicing factors have been identified and characterized in chloroplasts and mitochondria. Many RNA binding proteins have acquired roles in RNA splicing, and indeed a variety of often unrelated RNA binding proteins have essential functions in splicing of many plastid introns in plants, with varying degrees of specificity. The largest family of RNA binding proteins in plant organelles is the pentatricopeptide repeat (PPR) family. PPR proteins are involved in diverse post-transcriptional processes in organelles. In 2006, among hundreds of higher plant proteins of this family, only one was described as being required for a splicing event - PPR4 was shown to be absolutely and specifically required for the trans-splicing of the rps12 intron 1 in plastids (Schmitz-Linneweber et al., 2006). The main purpose of this PhD thesis was to characterize other PPR proteins involved in this process. By using a reverse genetics approach and by developing tools for the detection of splicing defects, seven new PPR proteins involved in RNA splicing of a subset of chloroplast or mitochondria introns have been characterized. In parallel, in order to characterize proteins involved in PPR-containing complexes, a TAP-TAG approach has been carried out on a few PPR proteins involved in splicing or editing of organellar RNA. The identification of partner proteins of 3 PPR proteins allows us to draw new mechanistic models and new hypotheses. Finally, the final part of the manuscript describes the discovery of splicing isoforms of PPR-encoding mRNAs. Alternative splicing may be involved in regulation of PPR gene expression and/or in increasing the diversity of the PPR protein family.

Afin de caractériser les mécanismes moléculaires sous-jacents au processus d’adhésion des bactéries commensales, nous avons utilisé Streptococcus salivarius comme modèle. Streptococcus salivarius est une bactérie pionière dans la colonisation des surfaces orales chez le nouveau né, et devient par la suite un composant majoritaire du microbiote oral de l'adulte avec un rôle écologique majeur. Nous avons développé une méthode pour identifier, par des tests de criblage phénotypique, les gènes impliqués dans l’adhésion de S. salivarius aux surfaces bactériennes ou de l’hôte. Notre approche a permis d’identifier un ensemble de gènes codant pour des protéines de surfaces, des glycosyltransférases, des transporteurs qui sont impliqués dans les phénomènes d’auto-agréation et / ou de co-agrégation avec d’autres espèces et / ou l’adhésion aux protéines de l’hôte.En particulier, nous avons montré que le système SecA2Y2, qui comprend des gènes codant pour des protéines dédiées à la glycosylation et l'export de protéines de surface riche en sérine (SRRPs), participe aux processus d’agrégation, de formation de biofilms, à l'adhésion in vitro aux protéines de l’hôte et in vivo à la colonisation du tractus digestif de souris. Alors que toutes les bactéries contenant un système similaire possèdent un substrat unique au système, une SRRP, le locus génétique secA2Y2 comprend trois SRRPs qui présentent des rôles complémentaires dans les phénotypes précédement cités. SrpB est spécifiquement impliquée dans la liaison aux cellules epitheliales, tandis que SrpC participe à l’adhésion aux protéines de la matrice extracellulaire et le mucus. De manière atypique, nous avons démontré que le processus de maturation des SRRPs est supporté par glycosyltransférases extra-cluster. Cette étude est le premier rapport indiquant la présence dans une bactérie de trois SRRPs, qui présentent des rôles complémentaires dans l'interaction bactéries-hôte. Bien que le système SecA2Y2 soit principalement associé à la virulence des bactéries pathogènes, il semble être clairement impliqué dans les caractères de commensalité de S. salivarius, tels que la colonisation de ses niches écologiques orales et intestinales. Ce travail offre de nouvelles perspectives sur les mécanismes de colonisation des bactéries commensales. / To characterize molecular mechanisms underlying adhesion of commensal bacteria, we used Streptococcus salivarius (SSAL) as a model. SSAL is among the most important pioneer colonizers of neonatal oral mucosal surfaces, and later becomes a predominant component of the human adult oral microbiota with pre-eminent ecological role. We developed a method to identified, through phenotypic screening assays, genes involved in SSAL adhesion to host or bacterial surfaces. In particular, we showed that the SecA2Y2 system, which comprises genes devoted to glycosylation and export of surface Serine Rich Repeat Proteins (SRRPs), participates to bacterial aggregation, biofilm formation, in vitro adhesion and colonization of mice. While all bacteria containing a similar system possess only one SRRP, the SSAL secA2Y2 locus comprises three SRRPs with complementary role in line with the previous phenotypes. Interestingly, SrpB is specifically involved in the binding to epithelial cells, while SrpC to the extracellular matrix and mucus proteins. We showed that these interactions require glycosylation of both bacterial SRPs and host surfaces. Surprisingly, we demonstrated that this essential process is shared by glycosyltransferases located in other genomic regions. This work is the first report showing the presence in a bacterium of three SRPs, which display complementary roles in bacterial-host interaction. While the SecA2Y2 system is mostly associated to virulence in pathogenic bacteria, it appears to be involved in the expression of commensal traits in SSAL, such as its colonization and its resilience to oral and intestinal niches. This work may offer new insights into the mechanisms of niche establishment (host, microbial communities) of commensal bacteria.

Internalin J (InlJ) gehört zu der Klasse der bakteriellen, cysteinhaltigen (leucine-rich repeat) LRR Proteine. Bei den Internalinen handelt es sich um meist invasions-assoziierte Proteine der Listerien. Die LRR-Domäne von InlJ ist aus 15 regelmäßig wiederkehrenden, stark konservierten Sequenzeinheiten (repeats, 21 Aminosäuren) aufgebaut. Ein interessantes Detail dieses Internalins ist das stark konservierte Cystein innerhalb der repeats. Daraus ergibt sich eine ungewöhnliche Anordnung von 12 Cysteinen in einem Stapel. Die Häufigkeit von Cysteinen in InlJ ist für ein extrazelluläres Protein von L. monocytogenes außergewöhnlich, und die Frage nach ihrer Funktion daher umso brennender. Im Vergleich zum ubiquitären Vorkommen der sogenannten repeat-Proteine in der Natur sind Studien zu ihrer Stabilität und Faltung nicht äquivalent vertreten. Die zentrale Eigenschaft der repeat-Proteine ist ihr modularer Aufbau, der durch einfache Topologie gekennzeichnet ist und auf kurzreichenden Wechselwirkungen basiert. Diese Topologie macht repeat-Proteine zu idealen Modellproteinen, um die stabilitätsrelevanten Wechselwirkungen zu separieren und zuzuordnen. In der vorliegenden Arbeit wurde die Faltung und Entfaltung von InlJ umfassend charakterisiert und die Relevanz der Cysteine näher beleuchtet. Die spektroskopische Charakterisierung von InlJ zeigte, dass dessen Faltungszustand durch zwei Tryptophane im N- und C-Terminus fluoreszenzspektroskopisch gut zugänglich ist. Die thermodynamische Stabilität wurde mittels fluoreszenz-detektierten, Guanidiniumchlorid-induzierten Gleichgewichtsexperimenten bestimmt. Um die kinetischen Eigenschaften von InlJ zu erfassen, wurden die Faltungs- sowie die Entfaltungsreaktion spektroskopisch untersucht. Die Identifizierung der produktiven Faltungsreaktion war lediglich durch die Anwendung des reversen Doppelsprungexperiments möglich. Die Auswertung erfolgte nach dem Zweizustandsmodell, wonach die Faltung dem „Alles-oder-Nichts“ Prinzip folgt. Die Gültigkeit dieser Annahme wurde durch die kinetische Charakterisierung bestätigt. Es wurde sowohl in den Gleichgewichtsexperimenten als auch in den kinetisch erhaltenen Daten eine hohe freie Stabilisierungsenthalpie festgestellt. Die hohe Stabilität von InlJ geht mit hoher Kooperativität einher. Die kinetischen Daten zeigen zudem, dass die hohe Kooperativität hauptsächlich der Faltungsreaktion entstammt. Der Tanford-Wert von 0.93 impliziert, dass die Oberflächenänderung während der Faltung bereits zum größten Teil erfolgt ist, bevor der Übergangszustand ausgebildet wurde. Direkte strukturelle Informationen über den Übergangszustand wurden mit Hilfe von Mutationsstudien erhalten. Zu diesem Zweck wurden 12 der 14 Cysteine gegen ein Alanin ausgetauscht. Die repeats 1 bis 11 von InlJ beinhalten jeweils ein Cystein, deren Anordnung eine Leiter ergibt. Deren Substitutionen haben einen vergleichbar destabilisierenden Effekt auf InlJ von durchschnittlich 4.8 kJ/mol. Die Verlangsamung der Faltung deutet daraufhin, dass die Interaktionen der repeats 5 bis 11 im Übergangszustand bereits voll ausgebildet sind. Demnach liegt bei InlJ ein zentraler Faltungsnukleus vor. Im Rahmen dieser Promotionsarbeit wurde eine hohe Stabilität und ein stark-kooperatives Verhalten für das extrazelluläre Protein InlJ beobachtet. Diese Erkenntnisse könnten wichtige Beiträge zur Entwicklung artifizieller repeat-Proteine leisten, deren Verwendung sich stetig ausweitet. / Internalin J (InlJ) is a member of the family of bacterial cysteine-containing leucine-rich repeat (LRR) proteins. Internalins are invasion-associated surface proteins of Listeria monocytogenes. The LRR domain of InlJ consists of 15 repeating units, which are arranged in tandem. The consensus sequence consists of 21 residues. Interestingly, a leucine residue which is highly conserved among the Internalins is replaced by cysteine. This results in a continuous cysteine ladder of 12 repeats. This frequency of cysteines is remarkable for an extracellular protein of L. monocytogenes. Stability and folding of repeat proteins are not equivalently studied considering their ubiquitous distribution in nature. Their modular structure results in simple topology and is dominated by short-range interactions. These characteristic features of repeat proteins facilitate the separation and identification of stabilizing interactions, making repeat proteins to ideal model systems for folding studies. In this work the folding and unfolding of InlJ has been extensively characterized, shedding light on the relevance of the cysteines. Two tryptophans located in the N- and C-terminus allowed monitoring the folding state of the entire protein via fluorescence. Thermodynamic stability was therefore derived by guanidinium chloride induced equilibrium experiments. Furthermore, the chemically induced unfolding and folding reactions were characterized with respect to their kinetics. Interrupted refolding experiments were essential for tracking the productive folding reaction of InlJ. Analysis of the kinetic and equilibrium data leads to the conclusion that the results are compatible with a two-state model. The study presented here reveals high stability of the protein InlJ in conjunction with high cooperativity. Kinetic data disclosed the origin of high cooperativity in the folding reaction; with a Tanford value of about 0.93. This high value implicates that the major change of the accessible surface area occurs before the transition state is formed. Mutational studies provided more detailed structural information about the transition state. 12 of 14 cysteine residues were mutated to alanine for this purpose. The cysteines in repeats 1 to 11 stack over each other and form a ladder of reduced cysteines. The substitution of one of these cysteines has an average destabilizing effect of 4.8 kJ/mol. The deceleration of the folding reaction by the substitution shows that repeats 5 to 11 are already fully structured in the transition state, pointing to a central nucleus in the folding of the LRR-protein InlJ. The extracellular protein InlJ reveals extreme stability and high cooperativity. The insights into the folding of this LRR motif could facilitate the design of further artificial repeat proteins.

Protein-based materials are an important area of research for various reasons. Natural protein materials such as spider silk have mechanical properties which compare favourably to artificial or inorganic materials, and in addition are biodegradable and can be produced from easily available feedstocks. It is also possible to produce materials that incorporate the functionality of a natural protein, such as ligand-binding or catalysis of reactions, thus allowing this functionality to be used in the solid rather than solution phase. Two particularly interesting components for protein-based materials are amyloid fibrils and tandem repeat proteins. Amyloid fibrils are exceptionally strong, tough, highly-ordered structures that self-assemble from a wide range of simple building blocks. Meanwhile, tandem repeat proteins are a class of proteins that act as scaffolds to mediate protein-protein interactions and are known to act as elastic springs. Unlike globular proteins, tandem repeat proteins can be designed to bind specific ligands, and their ligand-binding properties and stability can be tuned separately. This work details the synthesis and characterisation of repeat protein and amyloid fibril components for a “smart” hydrogel, the production of these gels, and their characterisation using a microfluidic method that I developed. Although amyloid fibrils have previously been decorated with functional proteins, hitherto, this has usually been done by assembling the fibrils from already-functionalised components. This approach limits the functionality to species that can survive the harsh conditions of amyloid aggregation and do not disturb fibril assembly. Therefore, a method was developed to produce amyloid fibrils that displayed an alkyne functionality on their surface to allow functional proteins or other species to be attached after assembly. This involved the design and synthesis (using solid-phase peptide chemistry) of a peptide based on the previously known TTR105-115 peptide (derived from the amyloidogenic Transthyretin protein). These fibrils were characterised by AFM and TEM and it was then shown that the assembled fibrils could be functionalised using an azide-alkyne “click” reaction. The reaction was shown to work with a variety of ligands including proteins, which were found to retain their structure and function after crosslinking to the fibril. The fibrils with ligands attached were characterised by a variety of methods including LCMS (liquid chromatography-mass spectrometry) and super-resolution optical microscopy. Next, repeat proteins were produced recombinantly containing non-natural azido amino acids at their termini. Incorporation of non-natural amino acids was carried out using a number of different methods including amber codon suppression and methionine replacement. Micron-sized hydrogels were then formed from microfluidic-generated droplets by covalently crosslinking the alkyne-functionalised fibrils with the azide-functionalised repeat proteins. The initial experiments to show proof of principle were carried out with consensus-designed repeat proteins, but repeat proteins based on natural sequences were also used to make hydrogels that could later be tested for potential uptake of peptides known to bind these proteins. These hydrogels could potentially be used for drug delivery or other applications in which a chemical response to a mechanical stimulus is desired. The mechanical properties of the hydrogels were measured using novel microfluidic devices, which were designed and fabricated using standard PDMS-based soft lithography.

No description available.

Anisotropic plasmonic noble metallic nanoparticles (APMNs) have received enormous attention due to their distinct geometric features and fascinating physicochemical properties. Owing in large part to their tailored localized surface plasmon resonance (LSPR) and the intensive electromagnetic field at the sharp corners and edges, APMNs are exceptionally well suited for biomedical applications such as biosensing, bioimaging, diagnostics and therapeutics. Although a rich variety of surfactant-assisted colloidal routes have been developed to prepare well-defined APMNs, biomedical applications necessitate tedious and rigorous purification processes for the complete removal of toxic surfactants. In this dissertation, we aim to develop generic bioenabled green synthetic methodologies towards APMNs. By applying a series of thermodynamic, kinetic and seed quality control, a series of APMNs with varied morphologies such as branched nanostars and triangular nanoprisms have been successfully prepared. We first presented the preparation of gold nanostars (Au NSTs) through a two-step approach utilizing a common Good's buffer, HEPES, as a weak reducing agent. Single crystalline Au NSTs with tunable branches up to 30 nm in length were produced and the halide ions rather than the ionic strength played a significant roles on the length of the branches of Au NSTs. Then consensus sequence tetratricopetide repeat (CTPR) proteins with increasing number of repeats were used as model proteins to probe the effects of concentration as well as the protein shape on the morphology and resulting physicochemical properties of plasmonic gold nanoparticles. Since the underlying growth mechanism for the biomimetic synthesis of APMNs remains elusive and controversial, the other objective is to elucidate the molecular interactions between inorganic species and biopolymers during the course of NP evolution. Fluorescent quenching and 2D NMR experiments have confirmed the moderate binding affinity of CTPR to the Au(0) and Au(III). We observed that the initial complexation step between gold ions and CTPR3 is ionic strength dependent. Furthermore, we also found that NPs preferentially interact with the negatively charged face of CTPR3 as observed in 2D NMR. Knowledge of binding behavior between biospecies and metal ions/NPs will facilitate rational deign of proteins for biomimetic synthesis of metallic NPs. A modified seed-mediated synthetic strategy was also developed for the growth of silver nanoprisms with low shape polydispersity, narrow size distribution and tailored plasmonic absorbance. During the seed nucleation step, CTPR proteins are utilized as potent stabilizers to facilitate the formation of planar-twinned Ag seeds. Ag nanoprisms were produced in high yield in a growth solution containing ascorbic acid and CTPR-stabilized Ag seeds. From the time-course UV-Vis and transmission electron microscopy (TEM) studies, we postulate that the growth mechanism is the combination of facet selective lateral growth and thermodynamically driven Ostwald ripening. By incorporation of seeded growth and biomimetic synthesis, gold nanotriangles (Au NTs) with tunable edge length were synthesized via a green chemical route in the presence of the designed CTPR protein, halide anions (Br⁻) and CTPR-stabilized Ag seeds. The well-defined morphologies, tailored plasmonic absorbance from visible-light to the near infrared (NIR) region, colloidal stability and biocompatibility are attributed to the synergistic action of CTPR, halide ions, and CTPR-stabilized Ag seeds. We also ascertained that a vast array of biosustainable materials including negatively charged lignin and cellulose derivatives can serve as both a potent stabilizers and an efficient nanocrystal modifiers to regulate the growth of well-defined Ag nanoprisms using a one-pot or seeded growth strategy. The influential effects of reactants and additives including the concentration of sodium lignosulfonate, H2O2 and NaBH4 were studied in great detail. It implies that appropriate physicochemical properties rather than the specific binding sequence of biomaterials are critical for the shaped-controlled growth of Ag NTs and new synthetic paradigms could be proposed based on these findings. Last but not the least, we have demonstrated the resulting APMNs, particularly, Au NSTs and Ag NTs exhibit remarkable colloidal stability, enhanced SERS performance, making them promising materials for biosensing and photothermal therapy. Since the Ag nanoprisms are susceptible to morphological deformation in the presence of strong oxidant, they also hold great potential for the colorimetric sensing of oxidative metal cation species such as Fe3+, Cr3+, etc. / Ph. D.

Yes / Background: The receptor for activated C-kinase 1 (RACK1) is a conserved protein belonging to the WD40 repeat family of proteins. It folds into a beta propeller with seven blades which allow interactions with many proteins. Thus it can serve as a scaffolding protein and have roles in several cellular processes. Results: We identified the product of the Dictyostelium discoideum gpbB gene as the Dictyostelium RACK1 homolog. The protein is mainly cytosolic but can also associate with cellular membranes. DdRACK1 binds to phosphoinositides (PIPs) in protein-lipid overlay and liposome-binding assays. The basis of this activity resides in a basic region located in the extended loop between blades 6 and 7 as revealed by mutational analysis. Similar to RACK1 proteins from other organisms DdRACK1 interacts with G protein subunits alpha, beta and gamma as shown by yeast two-hybrid, pulldown, and immunoprecipitation assays. Unlike the Saccharomyces cerevisiae and Cryptococcus neoformans RACK1 proteins it does not appear to take over Gβ function in D. discoideum as developmental and other defects were not rescued in Gβ null mutants overexpressing GFP-DdRACK1. Overexpression of GFP-tagged DdRACK1 and a mutant version (DdRACK1mut) which carried a charge-reversal mutation in the basic region in wild type cells led to changes during growth and development. Conclusion: DdRACK1 interacts with heterotrimeric G proteins and can through these interactions impact on processes specifically regulated by these proteins. / This work was supported by the DFG and SFB670. TYR acknowledges support from the Professorinnen Program of the University of Cologne.

In Tabak interagieren das Ankyrin-repeat Protein NtANK1 und der basische Leucin Zipper (bZIP)-Transkriptionsfaktor NtBZI-1. Diese Proteine sind in Auxin-vermittelter Genaktivierung und in Pathogenabwehr involviert. Ziel dieser Arbeit war es, die Funktion der homologen Ankyrin-repeat Proteine AKR2A und AKR2B aus Arabidopsis thaliana zu untersuchen. Dazu wurde die Interaktion zwischen AKR2A/B, und den homologen bZIP-Transkriptionsfaktoren der Gruppe C getestet. Mit verschiedenen Methoden, wie Hefe- und Protoplasten-two-hybrid und BiFC ( bimolecular fluorescence complementation ) konnte eine Interaktion der Arabidopsis Proteine nicht bestätigt werden. Lokalisationsstudien von YFP-AKR2A/B-Fusionsproteinen bestätigten, dass die Proteine im Cytoplasma lokalisiert sind. Sie besitzen ein funktionsfähiges Kernexportsignal und akkumulieren nach Inhibierung des Kernexports im Kern. Zur Funktionsaufklärung wurden AKR2-RNAi Pflanzen erzeugt, die sich phänotypisch vom Wildtyp unterscheiden: sie zeigen ein verringertes Wachstum und einen reduzierten Chlorophyllgehalt, abhängig von der Ausprägung des RNAi-Effektes. In elektronenmikroskopischen Untersuchungen ist zu erkennen, dass sich die Blattchloroplasten der AKR2-RNAi Pflanzen von denen des Wildtyps morphologisch unterscheiden und in ihrer Entwicklung unspezifisch beeinträchtigt sind. Eine Transkriptomanalyse der AKR2-RNAi Pflanzen zeigte, dass Gene des Endomembransystems herunterreguliert sind und viele Stress-induzierte Gene hochreguliert sind. Deshalb wurden die Pflanzen verschiedenen Stressbedingungen unterzogen und übereinstimmend stellte sich heraus, dass sie anfälliger gegenüber oxidativem Stress, Infektion mit dem biotrophen Bakterium Pseudomonas syringae und Infektion mit dem nekrotrophen Pilz Botrytis cinerea waren. Diese erhöhte Anfälligkeit kann als sekundärer Effekt aufgrund der beeinträchtigten Chloroplasten-Biogenese oder als spezifische Reaktion auf die reduzierte AKR2A/B-Proteinmenge interpretiert werden. Da AKR2A/B bereits als Importver mittler für chloroplastidäre Membranproteine beschrieben wurden (Bae et al., 2008), werden zusammenfassend mit den hier erhaltenen Daten multiple Funktionen für AKR2A und AKR2B diskutiert: Transport von Proteinen zu verschiedenen Endomembransystemen, eine Funktion im Signalaustausch zwischen Chloroplast und Kern, und eine Regulation der Transkriptionskontrolle im Kern.

Soybean is a dominant oilseed cultivated worldwide for its use in multiple sectors such as food and feed industries, animal husbandry, cosmetics and pharmaceutical sectors, and more recently, in production of biodiesel. Increasing demand of soybean, changing environmental conditions, and evolution of pathogens pose challenges to soybean production in limited acreage. Genetic research is the key to ensure the continued growth in soybean production, with enhanced yield and quality, while reducing the losses due to diseases and pests. This research is focused on the understanding of transcriptional regulation of two economically important agronomic traits of soybean: low seed phytic acid and resistance to Soybean mosaic virus (SMV), using the 'transcriptomics' and 'genomics' approaches. The low phytic acid (lpa) soybean is more desirable than conventional soybean, as phytic acid is an anti-nutritional component of seed and is associated with phosphorus pollution. Despite the eco-friendly nature of the lpa soybean, it shows poor emergence, which reduces soybean yield. This research is mainly focused on addressing the impact of lpa-causing mutations on seed development, which is suspected to cause low emergence in lpa soybeans. The differences in transcriptome profiles of developing seeds in lpa and normal phytic acid soybean are revealed and the biological pathways that may potentially be involved in regulation of seed development are suggested. The second research project is focused on Rsv3-type resistance, which is effective against most virulent strains of Soybean mosaic virus. The Rsv3 locus, which maps on to soybean chromosome 14, contains 10 genes including a cluster of coiled coil-nucleotide binding-leucine rich repeat (CC-NB-LRR) protein-encoding genes. This dissertation employed a comparative sequencing approach to narrow down the list of Rsv3 gene candidates to the most promising CC-NB-LRR gene. The evidence provided in this study clearly indicates a single CC-NB-LRR gene as the most promising candidate to deliver Rsv3-type resistance. / Ph. D.

Les lignines sont des hétéropolymères phénoliques de la paroi cellulaire, principalement à base de p-coumaryl, coniférylique et sinapylique alcools. Ces monolignols sont synthétisées dans le cytoplasme de la voie des phénylpropanoïdes, peut ensuite transportées vers les parois des cellules où ils sont polymérisés par oxydation en p-hydroxyphényl (H), guaiacyle (G) et syringyle (S) des unités de lignine. Cette étape de polymérisation par oxydation est conduite par les peroxydases dépendantes H₂O₂ et / ou laccases dépendantes O₂. Dans cette étude, nous avons signalé pour la première fois que les laccases sont également impliqués dans la lignification du les herbes. Un gène de laccase spécifique (BdLAC5) a été identifié parmi les 29 gènes de laccase non redondants dans Brachypodium génome, qui est responsable de la lignification dans les tiges de Brachypodium distachyon, une plante modèle pour les graminées. BdLAC5 gène a été retrouvé fortement exprimé dans les organes lignifiées (internodal, nœud et le pédoncule) et mal exprimé dans les organes avec faible niveau de lignine (jeunes feuilles et épillet), ni dans les tissus non-lignifiée (endosperme). Deux autres laccases BdLAC6 et BdLAC8 sont également trouvés coexprimés avec BdLAC5 et curieusement ils appartiennent à la même clade phylogénétique. BdLAC6 et BdLAC8 sont orthologues de Arabidopsis LAC4 et LAC2 respectivement. Dans les expériences d'hybridation in situ ont démontré le signal le plus intense dans les fibres interfasciculaires de l'entre-nœud a été détectée avec des sondes BdLAC5. En outre, des essais ont révélé que les protéines immunomarquages BdLAC5 pourraient être sécrétés dans la matrice de la paroi cellulaire, car nous avons détecté des particules fluorescentes dans ou à proximité de la paroi cellulaire. Le double mutant laccase touchée BdLAC5 et BdLAC8 a clairement montré que la lignification dans les fibres interfasciculaires impliqué différents gènes / protéines que la lignification dans les cellules métaxylème de Brachypodium. Métaxylème cellules ont été que faiblement affectés dans le double mutant lorsque les fibres interfasciculaires montré diminution dramatique de Wiesner coloration. Les différents mécanismes de lignification entre xylème et fibres est discutée. L'interaction physique et la synergie entre réglementation spécifique R2R3-MYB, bHLH et WDR protéines est bien étudiée dans la biosynthèse des flavonoïdes, racine des cheveux, trichomes et le développement en mucilage de graines de différentes espèces de plantes. Dans cette étude, nous avons essayé de comprendre les rôles de MYB-bHLH-WDR pour la régulation de la biosynthèse de la lignine. / Lignins are cell wall phenolic heteropolymers, mainly made from p-coumaryl, coniferyl, and sinapyl alcohols. These monolignols are synthesized in the cytoplasm from the phenylpropanoid pathway, then may transported to the cell walls where they are oxidatively-polymerized into p_hydroxyphenyl (H), guaiacyl (G) and syringyl (S) lignin units. This oxidative polymerization step is driven by H₂O₂-dependent peroxidases and/or O₂-dependent laccases. In this study we reported for the first time that laccases are also involved in lignification in grasses. A specific laccase gene (BdLAC5) was identified among 29 non-redundant laccase genes in Brachypodium genome, which is responsible for the lignification in stems of Brachypodium distachyon, a model plant for grasses. BdLAC5 gene was found highly expressed in lignified organs (internode, node and peduncle) and poorly expressed in organs with low lignin level (young leaf and spikelet) nor in non-lignified tissue (endosperm). Two other laccases BdLAC6 and BdLAC8 are also found coexpressed with BdLAC5 and interestingly enough they belong to the same phylogenetic clade. BdLAC6 and BdLAC8 are close orthologues of Arabidopsis LAC4 and LAC2 respectively. In situ hybridization experiments demonstrated the most intense signal in the interfascicular fibers of the internode was detected with BdLAC5 probes and then for BdLAC8 and BdLAC6 probes. Furthermore, immunolabelling assays revealed that BdLAC5 proteins might be secreted into the cell wall matrix because we detected some fluorescent particles close to or in the cell wall. The double laccase mutant affected in BdLAC5 and BdLAC8 (5ho8ho) clearly showed that the lignification in interfascicular fibers involved different genes/proteins than the lignification in metaxylem cells of Brachypodium. Metaxylem cells were only poorly affected in the double mutant when interfascicular fibers showed dramatic decrease of Wiesner staining. The different mechanisms of lignification between xylem and fibers is discussed. The physical interaction and regulatory synergy between specific R2R3-MYB, bHLH and WD repeat protein is well studied in the biosynthesis of flavonoids, root hair, trichome and seed mucilage development in different plant species. In this study, we were trying to figure out the roles of MYB- bHLH-WDR for the regulation of lignin biosynthesis.