In this thesis are solved the newly built 'hotel in Brno ". The building is freestanding. It has five storeys. The structural system is reinforced concrete skeleton. Columns in combination with masonry infill Porotherm. The building is based on the footings. The building has two height levels. The first is covered with a flat roof vegetation and the second single-roof bitumen sheets. The building is insulated contact system. On the first floor is a reception, restaurant with kitchen, fitness center and facilities for the hotel staff. The second floor of the portion used for guest accommodation. The second part is a cafe with cold kitchen and meeting room attached to the bar. In the third to fifth floors are guest rooms and technical background. On the fifth floor are apartments

Diploma thesis deals with the design documentation hotel building in the village of Vendryně. The building is designed in accordance with the existing this area and the slope of the terrain. This is a two-tier four-storey building. Above the 1st floor is designed flat vegetation roof and above the 4th floor is gabled roof. The building contains part of the accommodation, dining area and facilities for staff. Work includes architectural and layout design, preparation of construction drawings, design of fire safety design of buildings, basic thermal technical assessment and calculation of a selected wooden truss and a draft air exchange for restaurants and kitchens. The entire work will be complemented by a text part.

The subject of this thesis is the construction of Sport and relaxation center in Moravany. The building is divided into three objects. The first object is Bowling & Billiard Bar. The object is single-storey with no basement, flat roof and a total built area of 602,30 square meters. The second object is Technical and operational support + Fitness. The object has two floors, no basement, flat roof and a total built area of 757,40 square meters. The third object is Restaurant. The object is single-storey with no basement, flat roof and a total built area of 602,30 square meters. The building is designed in Porotherm constructional system. Ceiling structure is designed as a monolithic concrete slab. The roof system consists of wood glued laminated beams, purlins and rafters of solid wood. The slope of the roof plane is 3 %.

The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.

The subject of this thesis is to create a project documentation of the design of the new development, a boarding house with a restaurant and wellness centre. The object is designed as a detached building with two floor and wine cellar. The first floor above ground contains a restaurant and wellness centre. On the second floor there are 14 rooms for rent. The object foundation base are foundation strips. The load-bearing structure is a clay masonry and prestressed concrete floor slabs Spiroll. The object is roofed with a flat green roof. The drawing is processed with help of AutoCAD software.

The diploma thesis deals with the processing of project documentation. Specifically, the parts A, B, C, D.1.1 and D.1.3 of Annex 6 to Regulation No. 499/2006 Coll., On construction documentation, as amended by Decree No. 62/2013 Coll. The documentation refers to a motel with restaurant designed for 50 guests. The plot is located in Troubsko. The motel is divided into three separate buildings. In the main building is reception, restaurant with kitchen and offices. The building has ground floor and underground floor. The accommodation is divided into two one-storey buildings. The buildings are formed by separate units with 4 or 2 rooms which are connected by one roof. All buildings are designed with flat green roof. There is parking lot for public and restaurant guests, for accommodated guests ans private parking for employees and supply is solved on the plot. The buildings are based on plain concrete foundation strips. Vertical load-bearing structures are designed from sand-lime. Horizontal load-bearing structures are designed from precast filigree slabs. Partitions are designed from autoclaved aerated concrete blocks. The facade is thermally insulated by EPS boards. The 3% slope of the roof is achieved by using tapered EPS boards. Vegetation (stone crops) will be planted on the roof. part of this thesis is static calculation and design of staircase slab from reinforced concrete.

The subject of the final thesis is the elaboration of design documentation for the new construction of an accommodation facility, specifically a boarding house intended for recreation. The new building is located in the cadastral area of ??the village Vernířovice. It is a building with three floors above ground and one underground floor. The building is based on foundation strips made of plain concrete and a foundation slab made of reinforced concrete. The vertical load-bearing structures are made of cley blocks and blocks of permanent formwork. Horizontal load-bearing structures are made of reinforced concrete. The roof structure is saddle with elongated dormers.

The aim of the diploma thesis is to develop the design documentation for the construction of hotel on the outskirts Chlum, the district of of the city of Zlín. The building is designed as free-standing in a sloping terrain on plot no. 1262. The hotel is situated with a barrier-free entrance to the southwest. The building has a basement and 3 above-ground floors. There are a total of 14 rooms and 3 suites, one of which is designes as a barrier free. In the hotel there is restaurant, wellness and gym. The structure of the building is proposed as traditional masonry building. The external walls as well as internal walls are from brick blocks and the external walls in the basement are from concrete blocks of permanent formwork. The building is equipped with a contact thermal insulation system ETICS and an aesthetic wooden cladding is designed between the windows. The ceiling structures are designed as a reinforced concrete monolithic slabs. The building is based on foundation strips made of plain concrete. The roof structure above 2NP is designed as a flat vegetation roof, above 3NP as a flat roof with an aggregate embankment.

The subject of the diploma thesis is the design documentation for the construction of low-energy building. This is a hotel komplex, which is located in the city of Brno-Bohunice. The hotel has four floors, no basement and a warm flat roof. On the ground floor there is a hotel restaurant with facilities for employees, main hall, social facilities, wellness and technical facilities. The part of first floor consists of conference halls and a gym. In other parts of hotel are designed 47 guest rooms. Two guest rooms are for people with reduced mobility. The accommodation capacity of the hotel is 82 people. There are uncovered parking spaces for cars and one bus, tennis courts and a hotel garden on the plot. The structural system is combined with reinforced concrete columns and brick blocks. Horizontal structures are designed as cast-in-place reinforced concrete floor. The construction is based on foundation pad and strip foundation. The external wall is built from hollow clay blocks and insulated with external thermal insulation composite systém. The diploma thesis is processed to the extent of design documentation for construction.

Design of heating of hotel type. The first part describes the analysis of the building and heating heat pumps theory and evaluation systems with heat pump. In the second part we find two variants of technical solutions. The third part contains solutions for selected variant and it is heating with gas boiler.