Synthese und Charakterisierung (SC-XRD, P-XRD, IR, NMR, QCC) metall-organischer Komplexe tetravalenter Actinide Th, U, Np, Pu mit Liganden Salen und Derivat Salpn im Festkörper und in Lösung.

The use of polymer supports for transition metal catalysts are very important and useful in synthetic organic chemistry as they make possible the separation and isolation of catalysts and products quite easy. These polymer-bound ligands/catalysts/reagents can, often, be recovered and recycled numerous times and typically yield products in high purity, negating the need for further purification steps (i.e. column chromatography). Because of this, interest in these systems has garnered international attention in the scientific community as being “Green”. Historically, insoluble, polymer-supports (i.e. Merrifield resin) were used to develop recoverable catalysts. This has the advantage of easy separation and isolation from products after a reaction; because of their insolubility, such supported catalysts can be easily removed by gravity filtration. However, these catalysts often have relatively poor reactivity and selectivity when compared to homogeneous catalysts. Because of this disadvantage, our lab has had interest in the development of soluble polymer-supports for transition metal catalysts. We have developed several separation methods for these soluble polymer-bound catalysts. These include thermomorphic liquid/liquid and solid/liquid as well as latent biphasic liquid/liquid separation techniques. This dissertation describes the use of both, latent biphasic liquid/liquid separation systems and thermomorphic solid/liquid separation systems. In order to perform a latent biphasic iii liquid/liquid separation, a polymer-bound catalyst must have a very high selectivity for one liquid phase over the other. Our lab has pioneered the use of polyisobutylene (PIB) oligomers as supports for transition metal catalysts. Previous work has shown that these oligomers are > 99.96 % phase selectively soluble in nonpolar solvents. This has allowed us to prepare PIB-supported salen Cr(III) complexes that can be used in a latent biphasic liquid/liquid solvent system. The synthesis of these complexes is quite straightforward and such species can be characterized using solution state 1H and 13C NMR spectroscopy. Also, these complexes can be used to catalyze the ring opening of meso epoxides with azidotrimethylsilane (TMS-N3) and can be recovered and recycled up to 6 times, with no loss in catalytic activity. To perform a thermomorphic solid/liquid separation, a polymer-bound catalyst that is completely insoluble at room temperature but soluble upon heating must be used. Our lab has pioneered the use of polyethylene oligomers (PEOlig) as supports for transition metal catalysts. Such PEOlig-supported catalysts are able perform homogeneous catalytic reactions at elevated temperatures (ca. 65 ○C), but, upon cooling, precipitate out of solution as solids while the products stay in solution. This process allows for the easy separation of a solid catalyst from the product solution. Described herein, is the development of PEOlig-supported salen-Cr(III) complexes and PEOlig-supported NHC-Ru complexes. The preparation of these complexes is also straightforward and such species can be characterized using solution state variable temperature (VT) 1H and 13C NMR spectroscopy. In the case of the PEOlig-supported salen-Cr(III) complex, it was found to be a recoverable/recyclable catalyst for the ring opening of epoxides with TMS-N3 and could be reused 6 times with no loss in activity. The PE-supported NHC-Ru complex was able to be used as a recyclable ring closing metathesis (RCM) catalyst and could be used up to 10 times.

The focus of this dissertation is the use of aluminum Schiff base compounds, Salen(tBu)AlBr (SAB), in the dealkylation and detection of organophosphates (OPs). Three SAB compounds, Salen(tBu)AlBr (1), Salpen(tBu)AlBr (2), and Salophen(tBu)AlBr (3) were used to dealkylate a variety of trialkyl OPs. These reactions lead to unique organic-soluble aluminum phosphate compounds containing six-coordinate aluminum. Examples include [salen(tBu)AlOP(O)(OCH3)2]n (4), [salen(tBu)AlOP(O)(OCH2CH3)2]n (5), [salen(tBu)AlOP(O)(OPh)2]n (6), [Salophen(tBu)AlOP(O)(OCH3)2 (7), Salpen(tBu)AlOOP(O)(OiPr)2 (8). These compounds are unique examples of polymeric (4, 5, 6 and 7) and dimeric compounds (8) with salenAl units connected by phosphate linkages. The compounds do not decompose in neutral water. This is an advantage in the use of SABs for the deactivation of phosphate esters such as nerve agents. Water-soluble and stable group 13 salen complexes, Salen(SO3Na)MNO3 (M =Al (19), Ga (22)), Salpen(SO3Na)MNO3 (M = Al (20), Ga (23)), and Salophen(SO3Na)M(NO3) (M = Al (21), Ga (24)) were synthesized by using water-soluble Salen(SO3Na) ligand. All the compounds were characterized by various analytical techniques: 1H and 13C NMR, IR, and melting point. One SAB was used to detect the nerve agents (NA). Salen(tBu)Al(Ac), prepared in situ from Salen(tBu)AlBr and NaAc, forms Lewis acid-base adducts with the NAs, GB (sarin) and GD (soman), and the VX hydrolysis product, EMPA, in aqueous solution. The [Salen(tBu)Al(NA)]+ compound is sufficiently stable to allow the identification of the NA with ESI-MS. Molecular ion peak was detected for every compound with little or no fragmentation. The distinctive MS signatures for [Salen(tBu)Al(NA)]+ compounds provide a new technique for identifying NAs in aqueous solution.

The synthetic strategy of this study mainly depends upon the asymmetric desymmetrization of meso norbornene type an anhydride. Asymmetric desymmetrization was achieved by using chinchona alkaloids under kinetically controlled conditions. The resultant mono ester carboxylic acid was epimerized to trans configuration. Subsequent esterification followed by lithium aluminum hydride reduction afforded the first chiral diol ligand with 98 % ee. Transformation of diol to corresponding trans diamine was achieved via Mitsunobu-Gabriel combination. The resultant diamine was first transformed into salen type ligand with 3,5-di-tert-butyl-2-hydroxybenzaldehyde. Throughout this process, no racemization was observed and all the ligands tested in asymmetric reactions have 98 % ee value. The second part of the thesis involves the asymmetric test reactions of the chiral ligands to check the effectiveness of them. The first testing method was diethylzinc addition to benzaldehyde. The ligands showed moderate effectiveness. The salen type ligand was tested in asymmetric epoxidation and aziridination reactions and it showed good effectiveness. Another applied method was desymmetrization of meso 2-cyclohexene-3,4-diol in which 2-(diphenylphosphino)benzoic acid attached trans-diol and trans-diamine type ligands were tested. Since norbornene type strained bicyclic systems are available in ring opening methathesis polymerization (ROMP) reactions, trans-diamine was subjected to ROMP to get an enlarged macromolecular system

The study of catalysis is a fundamental aspect of chemical engineering, as its implications affect all chemical transformations. Traditionally, catalysis has been subdivided into two areas: homogeneous and heterogeneous catalysis. Homogeneous catalysis refers to single-sited catalysts that exist in the same phase as the reaction media. These catalysts tend to be highly active and selective but often difficult to recover and reuse. In contrast, heterogeneous catalysts are typically multi-sited catalysts that exist in a different phase from the reaction media. These catalysts tend to be less active and selective than their homogeneous counterparts. However, the vast majority of industrial scale catalysts are heterogeneous because they can be easily separated, making them easily implemented in continuous processes, allowing for efficient, large scale operations. Due to the limitations of traditional homogeneous and heterogeneous catalysts, researchers have increasingly investigated hybrid catalysts that incorporate aspects of homogeneous and heterogeneous catalysis. This is accomplished via immobilization of homogeneous catalyst analogues onto solid-phase supports, thereby preserving the activity and selectivity of homogeneous catalysts while allowing for facile recovery and reuse from the insoluble, heterogeneous support. A variety of systems is presented here including organic and organometallic catalysts immobilized on organic and inorganic supports. Five cases are included. The first discusses utilization of supported acid and base catalysts for use in one-pot cascade reactions. The second example illustrates use of silica-coated magnetic nanoparticle supported acid catalysts for organic transformations. The third case presents novel polymer brush supported Cobalt-salen catalysts for the enantioselective, hydrolytic kinetic resolution of epoxides. A fourth case presents novel, magnetic polymer brush supported organic and organometallic catalysts for organic transformations. The fifth example illustrates polymer and silica supported ruthenium-salen catalysts for the asymmetric cyclopropanation of olefins. The overall goal of this thesis work is to develop novel supports and immobilization techniques to advance the field of hybrid organic/inorganic catalysts for the production of fine chemical and pharmaceutical intermediates.

Techn. Hochsch., Diss., 2002--Aachen.

Doctor of Philosophy / Department of Chemistry / Christopher J. Levy / In the field of asymmetric catalysis salens and related molecules occupy a unique position in the breath and scope of reactions facilitated. They, nonetheless, are characterized by several conformationally derived limitations. This work deals with applying the principles of helicity with the goal of remedying these shortcomings, thereby ultimately fashioning, better, more selective catalysts. A series of novel ligands bearing phenanthryl and benz[a]anthryl side-arms attached to either a cyclohexyl or binaphthyl backbone bridging group, were prepared via multi-step synthesis. The ligands were subsequently metallated with zinc and iron salts to afford neutral helimeric complexes, that were characterized in the solution and solid states. The binaphthyl complexes were found via X-ray crystallographic analysis to afford exclusively M-helimers, while those incorporating a cyclohexyl bridge gave predominantly 1 : 1 P + M mixtures. A significantly greater degree of side-arm overlap was apparent where benz[a]anthryl side-arms were employed. 1H NMR analysis, unfortunately, did not allow for solution phase helimer determination, and ECD spectroscopy was therefore utilized as an alternative. In conjunction with computational techniques the conformations were probed, and to a high degree of certainty the prevailing solution geometries of the cyclohexyl complexes predicted. Our results indicate that in solution the M configuration is the sole or dominant form. Ionic zinc complexes based upon a tetradentate nitrogen donor motif and 8-isopropyl-2-quinolinecarboxaldehyde were also prepared. Structural characterization of the zinc complexes showed each to bind to two ZnCl2 units, and as a consequence to form dinuclear helicates.

Functionalized cyanophosphates are important starting materials for the synthesis of beta-lactam ring moiety of beta-lactam antibiotics. The cyanophosphates are synthesized starting from easily available acylphosphonate and ethylcyanoformate. Acylphosphonates are synthesized starting from acylchloride and trimethylphosphite. Addition of acylphoshonate to ethylcyanoformate furnishes the cyanophosphate with the quaternary center.

Computational chemists are concerned about two aspects when choosing between the myriad of theoretical methodologies: the accuracy (the "truth") and the computational cost (the tractability). Among the least expensive methods are the Hartree-Fock (HF), density functional theory (DFT), and second-order Moller-Plesset perturbation theory (MP2) methods. While each of these methods yield excellent results in many cases, the inadequate inclusion of certain types of electron correlation (either high-orders or nondynamical) can produce erroneous results. The compromise for the computation of noncovalent interactions often comes from empirically scaling DFT and/or MP2 methods to fit benchmark data sets. The DFT method with an empirically fit dispersion term (DFT-D) often yields semi-quantitative results. The spin-component scaled MP2 (SCS-MP2) method parameterizes the same- and opposite-spin correlation energies and often yields less than 20% error for prototype noncovalent systems compared to chemically accurate CCSD(T) results. There is no simple fix for cases with a large degree of nondynamical correlation (such as transition metal-salen complexes). While testing standard and new DFT functionals on the spin-state energy gaps of transition metal-salen complexes, no DFT method produced reliable results compared to very robust CASPT3 results. Therefore each metal-salen complex must be evaluated on a case-by-case basis to determine which methods are the most reliable. Utilizing a combination of DFT-D and SCS-MP2 methods, the reaction mechanism for the addition of cyanide to unsaturated imides catalyzed by the Al(Cl)-salen complex was performed. Various experimental observations are rationalized through this mechanism.

Two main areas are considered in this manuscript. The first describes the synthesis of group 10 metal complexes incorporating the water-soluble 1,3,5-triaza-7-phosphaadamantane (PTA) ligand and the second deals with the preparation of Cr(salen)X catalysts for the copolymerization of CO2 and epoxides. In the first topic, the synthesis of nickel(II) and palladium(II) salicylaldiminato complexes incorporating PTA has been achieved employing two preparative routes. Upon reacting the original ethylene polymerization catalyst developed by Grubbs and coworkers (Organometallics, 1998, 17, 3149), (salicylaldiminato)Ni(Ph)PPh3, with PTA using a homogeneous methanol/toluene solvent system resulted in the formation of the PTA analogs in good yields. Alternatively, complexes of this type may be synthesized via a direct approach utilizing (TMEDA)M(CH3)2 (M = Ni, Pd), the corresponding salicylaldimine, and PTA. Polymerization reactions were attempted using the nickel-PTA complexes in a biphasic toluene/water mixture in an effort to initiate ethylene polymerization by trapping the dissociated phosphine ligand in the water layer, thereby, eliminating the need for a phosphine scavenger. Unfortunately, because of the strong binding ability of the small, donating phosphine (PTA) as compared to PPh3, dissociation did not occur at a temperature where the complexes are not subjected to decomposition. Additionally, the unexplored PTA derivative, 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA), prepared by the literature procedure, was fully characterized by NMR and X-ray analysis. DAPTA is found be similar to its parent (PTA) in coordination mode and binding strength, as supported by its representative group 6 and group 10 complexes The second main topic involves the copolymerization of CO2 and epoxides (i.e., cyclohexene oxide (CHO)) for the formation of polycarbonate using Cr(salen)X (X = Br, OPh) catalysts with one equivalent of PR3 as the co-catalyst. The use of these catalysts and cocatalysts results in the most active chromium-based catalytic systems to date. The . hr-1highest activities observed are on the order of 109 mol CHO consumed . mol Cr-1 using PCy3 as the co-catalyst, and is clearly seen in the in situ monitoring of copolymer formation. An advantage of these systems involves the lack of cyclic carbonate production and high CO2 incorporation (>99%) within the polymer.