Den här rapporten har skrivits som en del av ett examensarbete på energiingenjörsprogrammet på Högskolan i Halmstad under våren 2014. Examensarbetet har genomförts i samarbete med AB Färdig Betong samt ÅF Infrastructure AB i Göteborg. Syftet med projektet är att undersöka energibesparingspotentialen hos AB Färdig Betongs produktionsanläggning på Ringön i Göteborg. Projektet har inneburit en energikartläggning av en industriell produktionsanläggning för lösbetong. Utgångspunkt för energikartläggningen har varit energiledningssystemet ISO 50001, med målsättningen att ta fram en teknisk energikartläggningsrapport i enlighet med standarden. Anläggningen har analyserats ur ett energibesparingsperspektiv. Data- och informationsinsamling samt mätningar har genomförts för att ta fram indata som beräkningsunderlag. Genom beräkningar har sedan möjliga energibesparingspotentialer och åtgärdsförslag tagits fram. Den totala energibesparingspotentialen för anläggningen innebär en besparing på 223 MWh av anläggningens totala energianvändning på 857 MWh år 2013, vilket motsvarar en minskning med omkring 26 %. Allmänna slutsatser är bland annat att all produktionsutrustning bör placeras inom klimatskalet, att all uppvärmning bör vara temperaturreglerad samt att ett mer långsiktigt energiperspektiv behövs i anläggningen. Energibesparingsmöjligheterna för anläggningen är mycket goda och investeringskostnaderna är i allmänhet låga. / This report has been written as part of a degree project at the Bachelor’s programme in energy engineering at Halmstad University in the spring of 2014. The project was made in collaboration with AB Färdig Betong and ÅF Infrastructure AB in Gothenburg. The project aims to investigate the potential energy savings of AB Färdig Betong’s production plant at Ringön in Gothenburg. The project was to make an energy audit of an industrial production plant for concrete. The starting point for the energy audit has been the ISO 50001 energy management system with the aim to develop a technical energy audit report in accordance with the standard. The plant has been analyzed from an energy perspective. Measurements, collection of data and information has been carried out to develop the input data basis. Through calculations, potential energy savings and proposals for actions were developed. Among the four largest energy saving potentials, there are two that have no investment cost at all. The total of all potentials represent a saving of 26 % of the total plant energy consumption of 857 MWh in 2013. General conclusions include that all production should be located within the building, that all heating should be temperature regulated and that a long term perspective on energy use is needed.

This report discusses the ambition of EDF, a French electricity provider, to offer new services to its customers. With the emergence of the smart grid that will be operational in 2020 in France, there are several opportunities that have to be taken. One of them is to be able to offer a suitable monitoring system to its customer. This study tried to emphasize the important aspects and features that are required in such a system. Several solutions that are currently being commercialized in France have been analyzed. A grading has been made according to the technical functionalities and the business models have been analyzed.  Recommendations for EDF have also been made in order to help the company to choose the right monitoring system.

Hydropower is the most important power balancing resource in the Swedish electrical power system, regulating the power supply to match the load. Consequently, several hydropower plants have periods of stand-by operation where the power production is absent but where several devices within a plant are still active. Such a device is the step-up power transformer, which during stand-by operation still generates no-load energy losses. These losses can accumulate to a considerable amount of energy and costs during the long technical lifetime of the apparatus. One option to minimize these no-load energy losses is by turning the transformer off when its generating unit is in stand-by operation. However, when this transformer operational change has been explained to experts in the field, the most common response has been that a more frequent reenergizing of a transformer leads to higher risks for errors or transformer breakdowns. This study aimed to analytically investigate three effects from this operational change. First, the potential of fatigue failure for the windings due to the increased sequences of inrush current. Secondly, the thermal cycling as a consequence of change in present losses. Lastly, the energy and economic saving potentials for hydropower plants where this operational adjustment is applied. The study used both established as well as analytical tools explicitly created for this study. These were then applied on currently active transformers in different plant categories in Fortum’s hydropower fleet.  The study primarily showed three things. Firstly, risk of fatigue failure due to the increased presence of inrush currents did not affect the transformer’s technical lifetime. Secondly, the thermal cycling changes were slightly larger with absent no-load losses during stand-by operation. The average temperature for the transformer decreased, which in general is seen as a positive indicator for a longer insulation lifetime and thus the transformer’s technical lifetime. Finally, the created frameworks showed the potential of saving energy and money for all plant categories, where the potential grew with the installed production capacity and the stand-by operation timeshare. Despite the simplifications made to describe the complex reality of a transformer operating in a hydropower plant, this thesis contributes to lay a foundation for future investigation of an easy adjustment to avoid unnecessary energy losses and costs for transformers in hydropower plants.