Transient heat transfer phenomena in the rotational molding of plastic parts are modeled in this study. Natural convection and radiation from the furnace and flue gases to the mold housing are analyzed. Other models include transient heat transfer through the mold, single-phase conduction through the particulate plastic material prior to phase change, melting of the plastic and heating of the liquid pool. Subsequent staged cooling of the mold and solidification of the plastic using a combination of free and forced convection and radiation, are also modeled. The mold wall, melt, and solidified plastic regions are divided into a number of finite segments to track the temperature variation with time during the molding process. The corresponding variations in masses and thicknesses of the melt and solidified plastic regions are estimated. This information is used to estimate the energy consumption rates for various phases of the process. The model is applied to a specific molding process in a commercial rotational molding plant. Parametric studies of the effect of heating and cooling durations on the plastic temperatures and the energy consumption rates are conducted. These analyses provide insights about opportunities for optimization of the heating and cooling schedules to reduce overall energy consumption and improve throughput. The overall energy and gas consumption for the rotational molding process, taking into consideration the thermal mass of the auxiliary housing (steel) required to hold the molds, is estimated on a per-batch basis. In addition, a preliminary design for an alternative system for heating and cooling the molds using a high temperature heat transfer fluid (HTF) flowing through jackets integral to the molds is proposed.

INTRODUCTION. Although seldom a mainstream topic in social work, the financial functioning of individuals and families plays a central role in well-being. The time is right to better understand the workings of low-income families, especially in this uncertain economic climate. Matched savings program called Individual Development Accounts (IDAs) provide a context for investigating how low-income parents save and accumulate assets. IDAs offer a unique means for a systematic study of the saving strategies used by low-income individuals and how the decision to save may create hardships for themselves and their families. There is still a pressing need for more research that can help clarify parental saving strategies, the factors facilitating or impeding saving, and the potential hardships low-income savers face. Of critical importance to the field is research that helps to better understand what sacrifices low-income parents make when they have made the decision to secure a better future for their families. METHODS. The sample is 150 savers from a statewide matched savings program. This study is a secondary analysis of telephone survey and administrative data. Bivariate and multivariate statistical tests were conducted to test six hypotheses. The variables of interest are saving strategies, saving supports, and hardships. RESULTS. Parents who have a history of saving use significantly more helpful saving strategies than respondents without a saving history. Parents who have a history of saving experience less severe hardship than parents who do not have a history of saving. Also, married parents experience fewer hardships than non-married parents. Minority parents experience significantly less intense saving supports than non-minority parents. There was not a relationship between the number of helpful saving strategies and the age of the saver. A relationship was not found between the saver's age or number of children and the number of hardships experienced.

Industrial and mining sectors are amongst the largest single energy consumers in South Africa, making them a primary focus for implementing energy saving initiatives. Refrigeration systems on mines are responsible for consuming up to25 % of the electrical energy consumption on a typical South African deep level mine. Ample opportunities to reduce the energy consumption of these systems exists, as many of the current systems rely on old technology and function under partial or inadequate control management. In compiling this thesis, various energy saving strategies on deep level mines were investigated. In specific, the effects of controlling and improving the cooling auxiliaries. Scenarios were investigated and simulated, where after an optimum solution was implemented. Implementations, such as the ones covered in this dissertation, form part of the IDM (Integrated Demand Management) energy efficiency incentive introduced by Eskom, where funding is made available based on actual power saving; ensuring that the projects will be financially viable to the clients. Reduced electrical energy consumption realised from the abovementioned projects were measured, captured and compared to the consumption before project implementation to determine the achieved savings. Savings of up to 30 % of the plant installed capacity were realised, providing average savings of up to 2.3 MW per day. / Thesis (MIng (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013

Industrial and mining sectors are amongst the largest single energy consumers in South Africa, making them a primary focus for implementing energy saving initiatives. Refrigeration systems on mines are responsible for consuming up to25 % of the electrical energy consumption on a typical South African deep level mine. Ample opportunities to reduce the energy consumption of these systems exists, as many of the current systems rely on old technology and function under partial or inadequate control management. In compiling this thesis, various energy saving strategies on deep level mines were investigated. In specific, the effects of controlling and improving the cooling auxiliaries. Scenarios were investigated and simulated, where after an optimum solution was implemented. Implementations, such as the ones covered in this dissertation, form part of the IDM (Integrated Demand Management) energy efficiency incentive introduced by Eskom, where funding is made available based on actual power saving; ensuring that the projects will be financially viable to the clients. Reduced electrical energy consumption realised from the abovementioned projects were measured, captured and compared to the consumption before project implementation to determine the achieved savings. Savings of up to 30 % of the plant installed capacity were realised, providing average savings of up to 2.3 MW per day. / Thesis (MIng (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013

Radiation from Computed Tomography (CT) is now the major contributor to population radiation dose. Despite controversy around the dose-effect relationship of radiation from CT, the linear non-threshold (LNT) theory is endorsed by many authorities, and constitutes the basis of cancer risk estimates. The purpose of this study was (1) a literature review of radiobiological theories, and methods of dose saving stategies in CT; (2) to highlight the importance of dose saving in CT, and to demonstrate how dose can be saved in a radiology department: Following a 40% reduction in reference X-ray tube current for a CT of the urinary tract, the effecitve dose and estimated lifetime attributable risk of incident cancer due to this CT in a group (n=103) were reduced by 37% and 38% in an age and sex-matched group respectively. The literature review showed that the public health implications of CT radiation exposure remain uncertain. / Health Studies / M.A. (Public Health)