A system for the patterning of amines through the thermal decomposition of a thin polymer film was proposed. The polymer was synthesized and films were produced by spin coating. The pyrolysis of both the polymer and the films was studied. The physical properties of the film, such as Tg, were controlled through crosslinking of the polymer and the crosslinking conditions were optimized. Analyses of the reactions that occur on the film as a result of thermal decomposition were studied. These studies seem to indicate that the thin film system studied is viable option toward the patterning of amines. The ability to bind material to the polymer films after deprotection was demonstrated using fluorescent protein and fluorescein isothiocyanate. Micron scale patterns of these fluorescent molecules were created and imaged, successfully demonstrating the viability of the system for patterning. Patterns of polyphenylene vinlyene were produced through the thermal decomposition of a tetrahydrothiophenium chloride salt precursor. Images of the patterns were obtained.

There is a need to discover advanced materials to address the pressing challenges facing humanity, however there are far too many combinations of material composition and processing conditions to explore using conventional experimentation. One powerful approach for accelerating the rate at which materials are explored is by miniaturizing the scale at which experiments take place. Reducing the size of samples has been tremendously productive in biomedicine and drug discovery through standardized formats such as microwell plates, and while these formats may not be the most appropriate for studying polymeric materials, they do highlight the advantages of studying materials in ultra-miniaturized volumes. However, precise and controlled methods for handling diverse samples at the sub-femtoliter-scale have not been demonstrated. In this thesis, we establish that scanning probes can be used as a technique for realizing and interrogating sub-femtoliter scale polymer samples. To do this, we develop and apply methods for patterning materials with control over their size and composition and then use these methods to study material systems of interest. First, we develop a closed-loop method for patterning liquid samples using scanning probes by utilizing tipless cantilevers capable of holding a discrete liquid drop together with an inertial mass sensing scheme to measure the amount of liquid loaded on the probe. Using these innovations, we perform patterning with better than 1% mass accuracy on the pL-scale. While dispensing fluid with tipless cantilevers is successful for patterning pL-scale features and can be considered a candidate for robust nanoscale manipulation of liquids for high-throughput sample preparation, the minimum amount of liquid that can be transferred using this method is limited by number of factors. Thus, in the second section of this thesis, we explore ultrafast cantilevers that feature spherical tips and find them capable of patterning aL-scale features with in situ feedback. The development of methods of interrogating polymers at the pL-scale led us to explore how the mechanical properties of photocurable polymers depend on processing conditions. Specifically, we investigate the degree to which oxygen inhibits photocrosslinking during vat polymerization and how this effect influences the mechanical properties of the final material. We explore this through a series of macroscopic compression studies and AFM-based indentation studies of the cured polymers. Ultimately, the mechanical properties of these systems are compared to pL-scale features patterned using scanning probe lithography and we find that not only does oxygen prevent full crosslinking when it is present during the post-print curing, but the presence of oxygen during printing itself irreversibly softens the material. In addition to developing new methods for realizing ultra-miniaturized samples for study, the novel scanning probe methods in this work have led to new paradigms for rapidly evaluating complex interactions between material systems. In particular, we present a novel method to quantitatively investigate the interaction between the metal-organic frameworks (MOFs) and polymers by attaching a single MOF particle to a cantilever and studying the interaction force between this MOF and model polymer surfaces. Using this approach, we find direct evidence supporting the intercalation of polymer chains into the pores of MOFs. This work lays the foundation for directly characterizing the facet-specific interactions between MOFs and polymers in a high-throughput manner sufficient to fuel a data-driven accelerated material discovery pipeline. Collectively, the focus of this thesis is the development and utilization of novel scanning probe methods to collect data on extremely small systems and advance our understanding of important classes of materials. We expect this thesis to provide the foundation needed to transform scanning probe systems into instruments for performing reliable nanochemistry by combining controlled and quantitative sample preparation at the nanoscale and high-throughput characterization of materials. To conclude, we present an outlook about the necessary technological advancements and promising directions for materials innovations that stem from this work.

The initiation and high resolution control of surface confined chemical reactions would be both beneficial for nanofabrication and fundamentally interesting. In this work, spatially controlled scanning probe directed organometallic coupling, patterned functional protein immobilisation and highly localised reversible redox reactions on SAMs were investigated. Catalytically active palladium nanoparticles were mounted on a scanning probe and an appropriate reagent SAM was scanned in a reagent solution. This instigated a spatially resolved organometallic coupling reaction between the solution and SAM-phase reagents. Within this catalytic nanolithography a spatial resolution of ~10nm is possible, equating to zeptomole-scale reaction. The methodology was applied to reactions such as Sonogashira coupling and local oligo(phenylene vinylene) synthesis. By altering the experimental protocols, relating probe scan velocity to reaction yield and characterising the nanopattern, a PVP matrix model describing a proposed mechanism of catalytic nanolithography, was presented. Though ultimately limited by probe deactivation, calculations indicated that activity per immobilised nanoparticle is very high in this configuration. For biopatterning, surface nanopatterns defined by carboxylic functionality were generated from methyl-terminated SAMs by local anodic oxidation (LAO) initiated by a conductive AFM probe. By employing suitable linker compounds, avidin and Stefin-A quadruple Mutant (SQM) receptive peptide aptamers were patterned at sub-100nm resolution. The multiplexed sensing capability of an SQM array was demonstrated by reacting generated patterns with single or a mixture of multiple antibodies. The reversible redox conversion and switching of reactivity of hydroquinone-terminated SAMs was electrochemically demonstrated prior to an application in redox nanolithography. In this methodology, spatially controlled probe-induced in situ "writing" and "erasing" based on reversible redox conversion were conducted on hydroquinone terminated SAM. In combination with dip-pen nanolithography, a novel method of redox electro-pen nanolithography was designed and the method’s application for lithography was examined.

Face à la quête constante de miniaturisation, les nanosciences ont connu un essor fulgurant lors de la dernière décennie. Au sein de ces dernières, les procédés lithographiques – clé de voûte de l’industrie des semi-conducteurs – permettent désormais d’accéder à des nanomatériaux fonctionnels. Malgré les récents développements technologiques, l’obtention de nanostructures possédant une résolution inférieure à 100 nm reste un défi majeur pour la communauté scientifique.Devant l’intérêt grandissant de développer des méthodes alternatives en nanolithographie, notre groupe s’est tourné vers une approche chimique, nommée nanolithographie par sonde locale catalytique (cSPL). Combinant la robustesse de la catalyse organométallique et la flexibilité offerte par la microscopie à sonde locale, notre stratégie permet la nanostructuration de surfaces organominérales par la création de liaisons covalentes dans des conditions douces. Cette approche innovante constitue le premier exemple d’immobilisation d’un catalyseur homogène à la surface d’une pointe d’un microscope à force atomique (AFM), dans l’optique de contrôler spatialement une réactivité chimique, l’époxydation localisée d’alcènes terminaux. Ces fonctions époxydes ont été employées comme points d’ancrage dans la nanostructuration à façon de surfaces de silicium avec une large variété de nucléophiles. De plus, l’optimisation des paramètres physico-chimique influant sur la réaction, a permis d’atteindre des résolutions latérales de l’ordre de 40 nm et laisse entrevoir de nombreuses perspectives dans la nanostructuration tridimensionnelle de matériaux organiques. / In regard to the constant quest for miniaturization, the field of nanosciences has known a tremendous expansion over the last decade. More precisely, lithographic technologies - key processes for the semi-conductor industry – allow to access to functional nanomaterials. Despite recent technological developments, the synthesis of nanostructures with a sub-100 nm resolution remains a major challenge for the scientific community.Due to the growing interest in the design of new nanolithographic methods, our group has focused its efforts on the development of a chemical approach, named catalytic scanning probe lithography (cSPL). Unifying the robustness of organometallic catalysis and the flexibility offered by scanning probe microscopy, our strategy allows the nanostructuration of organomineral surfaces in a soft controlled manner by the formation of covalent bonds. This innovative approach represents the first example of the immobilization of an homogeneous catalyst on the edge of an atomic force microscope (AFM) tip, in order to spatially control a chemical reaction: the localized epoxidation reaction of terminal alkenes. Those epoxides were then used as anchoring sites, in the nanostructuration of silicon wafers with a broad range of nucleophiles. Moreover, the different physico-chemical parameters influencing the reaction were optimized, allowing us to reach lateral resolutions down to 40 nm and opening new perspectives in the field of 3D-nanostructuration of organic materials.

Organic molecules such as porphyrins and alkanethiols are currently being investigated for applications such as sensors, light-emitting diodes and single electron transistors. Porphyrins are stable, highly conjugated compounds and the choice of metal ion and substituents bound to the macrocycle as well as other effects such as chemical surrounding and cluster size modulate the electronic and photonic properties of the molecule. Porphyrins and their derivatives are relatively non-toxic and their very rich photo- and electro-chemistry, and small HOMO-LUMO gaps make them outstanding candidates for use in molecularly-enhanced electronic applications. For these studies, self-assembled tri-pyridyl porphyrin thiol derivatives have been fully characterized on Au(111) surfaces. A variety of surface characterization techniques such as Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS) have been implemented in order to obtain information regarding the attachment orientation based on the angle and physical height of the molecule, conductivity which is determined based on the apparent height and current-voltage (I-V) measurements of the molecule, conductance switching behavior due to conformational or other effects as well as the stability of the molecular ensembles. Specifically, the transport properties of free base and zinc coordinated tri-pyridyl porphyrin thiol molecular islands inserted into a dodecanethiol matrix on Au(111) were investigated using STM and cross-wire inelastic electron tunneling spectroscopy (IETS). The zinc porphyrin thiol islands observed by STM exhibited reversible bias induced switching at high surface coverage due to the formation of Coulomb islands of ca. 10 nm diameter driven by porphyrin aggregation. Low temperature measurements (~ 4 K) from crossed-wire junctions verified the appearance of a Coulomb staircase and blockade which was not observed for single molecules of this compound or for the analogous free base. Scanning probe lithography via nanografting has been implemented to directly assemble nanoscale patterns of zinc porphyrin thiols and 16-mercapotohexadecanoic acid on Au surfaces. Matrix effects during nanopatterning including solvent and background SAMs have been investigated and ultimately ~ 10 nm islands of zinc porphyrins have been fabricated which is the optimal size for the observed switching effect.

This critical review summarizes recent developments in the fabrication of patterned polymer brushes. As top-down lithography reaches the length scale of a single macromolecule, the combination with the bottom-up synthesis of polymer brushes by surface-initiated polymerization becomes one main avenue to design new materials for nanotechnology. Recent developments in surface-initiated polymerizations are highlighted along with diverse strategies to create patterned polymer brushes on all length scales based on irradiation (photo- and interference lithography, electron-beam lithography), mechanical contact (scanning probe lithography, soft lithography, nanoimprinting lithography) and on surface forces (capillary force lithography, colloidal lithography, Langmuir–Blodgett lithography) (116 references). / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第16851号 / 工博第3572号 / 新制||工||1540(附属図書館) / 29526 / 京都大学大学院工学研究科材料工学専攻 / (主査)教授 杉村 博之, 教授 酒井 明, 准教授 鈴木 基史 / 学位規則第4条第1項該当

Aujourd'hui, les structures basées sur les matériaux ferromagnétiques sont largement utilisées pour différentes applications: mémoires magnéto-résistives à accès non séquentiel, capteurs magnétiques et également nouveaux composants électroniques et dipositifs spintroniques. La tendance générale de l'électronique moderne est une réduction de la dimension des éléments à l'échelle submicronique. Ainsi, les nanostructures magnétiques sont d'un grand intérêt et leurs méthodes de fabrication et propriétés sont étudiées activement.Le but principal de ce travail est la préparation et la recherche expérimentale et théorique des propriétés de nanostructures magnétiques pour applications aux composants magneto-résistifs et phononiques. La lithographie à sonde locale (SPL) et la lithographie par faisceau d’électrons (EBL) ont été utilisées pour la fabrication des nanostructures. De premiers pas ont également été réalisés en fabrication des cristaux phononiques sensibles au champ magnétique. / Nowadays, structures based on ferromagnetic materials are largely used for different applications: random access magneto-resistive memories, magnetic sensors, and also new electronic components and spintronic devices. The general trend of modern electronic is the reduction of dimensions down to submicronic scales. Therefore, the magnetic nanostructures are of great interest and their methods of fabrication and properties largely studied.The main goal of this work is the preparation and experimental and theoretical research on properties of magnetic nanostructures for applications in magnetoresistive and photonic devices. The Scanning Probe Lithography (SPL) and Electron Beam Lithography (EBL) were used for the nanostructures fabrications. First steps were also achieved in fabrication of phononic cristals sensitive the magnetic field.

This critical review summarizes recent developments in the fabrication of patterned polymer brushes. As top-down lithography reaches the length scale of a single macromolecule, the combination with the bottom-up synthesis of polymer brushes by surface-initiated polymerization becomes one main avenue to design new materials for nanotechnology. Recent developments in surface-initiated polymerizations are highlighted along with diverse strategies to create patterned polymer brushes on all length scales based on irradiation (photo- and interference lithography, electron-beam lithography), mechanical contact (scanning probe lithography, soft lithography, nanoimprinting lithography) and on surface forces (capillary force lithography, colloidal lithography, Langmuir–Blodgett lithography) (116 references). / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.