1 |
Získávání a vyhodnocování dat environmentálních veličin / Environmental variables acquisition and evaluationUlrych, Vladislav January 2015 (has links)
The first part of thesis is devoted to the environment of the room in which is monitoring device intended - server room. There are description of calculating algorithms for proper sizing of cooling due to the heat. Further in this part is description of suitable senzors for monitoring device - physical principle, their proper use and meaning. Theoretical part also contains a list of several available ready commercial solutions of monitoring stations and their characteristics.
The second part is devoted to the assembly of monitoring device - physical build of hardware components, preparation s and connecting sensors, operating system installation, configuration and network preparation. The second part contains also instaling web server and configuration parts, that allows amek a web interface with presentation of measured physical quantities. Integration device with Simple Network Management Protocol (SNMP) for use with Zabbix monitoring system. Output from this work can be used for monitoring fundamental physical quantities in a small server room or in switch room.
|
2 |
Mobilní robot Micromouse II / Micromouse II mobile RobotPavláček, Martin January 2011 (has links)
This thesis describes the design and implementation of mobile robot IEEE Micromouse category. The aim is to build a functional design of robot usable to testing methods of mapping and localization. The thesis also deals with the design of electronics for motion control. Electronic design of optical sensors operating on the principle of reflection of infrared light and the signal processing.
|
3 |
Implementace algoritmů kinematiky pro čtyřnohý chodící robot / Implementation of kinematics algorithms for the four legged mobile robotKrálík, Jan January 2018 (has links)
The goal of the work is restore a quadruped walking spider-type robot named Jaromír. Part of the work is a body design that is then printed on a 3D printer. Another part is the design and creation of a new control board, which’ll include sensor equipment appropriate for robot operation. Subsequently, the thesis deals with the design of the tactile sensor’s and their fitting on the legs. The final part is implementation of the algorithm for robot control. The goal was to put the model to a state where it could be used for learning and presentations.
|
4 |
Heterogeno integrisani pasivni induktivni senzori / Heterogenous integrated passive inductive sensorsKisić Milica 29 December 2016 (has links)
<p>U disertaciji je prikazano teorijsko i praktično istraživanje koje se odnosi na projektovanje, fabrikaciju i karakterizaciju heterogeno integrisanih induktivnih senzora za mjerenje sile, pritiska i pomjeraja. Cilj istraživanja doktorske disertacije je kombinovanje različitih tehnologija izrade i materijala, kako bi se projektovali senzori koji će biti konkurentni aktuelnim rešenjima, i koji bi se mogli koristiti za konkretne primjene. U okviru istraživanja, heterogenom integracijom su kombinovane prednosti tehnologije štampanih ploča (Printed Circuit Board - PCB), fleksibilne tehnologije i tehnologije niskotemperaturne zajedno-pečene keramike (Low Temperature Co-fired Ceramics – LTCC). Razvijena su tri prototipa senzora za mjerenje sile, pritiska i pomjeraja korišćenjem struktura sa induktorom i feritom u njegovoj blizini. Mjerenje realizovanih prototipova senzora vrši se bežično pomoću spregnutog antenskog namotaja. Na osnovu početnih rezultata ispitivanja, senzori su modifikovani u cilju poboljšanja i optimizovanja performansi. Projektovani senzori omogućavaju bežično mjerenje, jeftini su, kompaktni i jednostavni. Na osnovu teorijske analize, simulacija, eksperimetnalnih mjerenja, ustanovljena je ispravnost rada i primjenljivost realizovanih senzora.</p> / <p>In doctoral thesis theoretical and practical investigation on design, fabrication and characterisation of heterogenous integrated inductive sensors for measuring force, pressure and displacement are shown. The aim of the thesis is to investige the usage of different technologies and materials in order to design sensors which will be competitive to actual solutions and usable for specific aplications. Using heterogenous integraton, advantages of Printed Circuit Board technology (PCB), flexible and Low Temperature Co-fired Ceramics (LTCC) technologies are used. Three sensor prototypes for measuring force, pressure and displacement are developed using inductor and ferrite in its near proximity. Measurements of the realised sensor prototypes are wirelessly done using an external surrounding coil as an antenna. Based on the initial measuring results, sensors are redesigned in order to improve and optimize their performance. Projected sensors are low-cost, compact, simple, and enable wireless measurement. The proper operation and applicability of realized sensors are confirmed using theoretical analysis, simulation and experimental testing with presented results.</p>
|
5 |
Senzorické systémy vozidel / Vehicle sensoric systemsAltal, Rami January 2016 (has links)
The objective of the thesis is to analyze modern sensoric systems and assistance systems of active vehicle safety. In the beginning of the thesis it describes the working principles of individual sensors, their structures and their potential for driver assistance systems and in the following chapter it describes in detail some of the selected modern assistance systems. The final chapter describes the experiment, a simulation of adaptive cruise control function using the Lego Mindstorms NXT programmable robotics kit.
|
6 |
Simulátor určení souřadnic senzorových uzlů / Performance of Anchor-Free Localization in Wireless Sensor NetworkNováček, Aleš January 2010 (has links)
Many applications that use senzor data from a wireless senzor network require corresponding node position information as well, information from the senzors is useful only if node location information is also available. There are many ways to get information about location of senzor, but some are expensive and inefficient. My work presents fully decentralized algorithm AFL (anchor-free localization) for localization of wireless sensors. Aim of my master´s thesis is to describe main features and advantages of AFL and to create program that simulates localization process.
|
7 |
Inteligentní detektor vodíku / Smart hydrogen sensorKašpárek, Petr January 2013 (has links)
The main goal of this diploma thesis is to get familiar with organic sensors developed at the Faculty of Chemistry at Brno University of Technology. The outcome is the implementation of smart hydrogen detector which is based on use of these sensors. This device will allow to test and use relevant sensors outside the test apparatus placed in the laboratory of the Faculty of Chemistry at Brno University of technology.
|
8 |
Senzory plynů, jejich konstrukce a testování / Gas sensors, their construction and testingPytlíček, Zdeněk January 2010 (has links)
This work deals with branch of gas sensors, their construction and methodology of testing. The general aim is a design and implementation of a station for simple testing of conduction gas sensors. The whole station is conceived as virtual measuring apparatus, operated by PC in LabView environment. The station enables mixing of any two gases at concentration demanded and measuring of the basic conduction characteristics of the thick-film and thin-film gas sensors. The central communication interface and modular conception enable easy expansion of possibilities of the whole apparatus in the future. It is possible to measure up to eight gas sensors split into two TO-12 packages simultaneously.
|
9 |
Bezdrátová senzorická síť pro sušárnu chmele / Wireless sensoric network for hop drying facilityČapek, Lukáš January 2011 (has links)
The purpose of this project is to build a wireless sensor network for measuring temperature and relative humidity in hop drying facility. This is a monitoring device, consists of several sensor units and one control and display unit. Display unit coordinates a whole network and can display data on LCD or download collected data to PC. Sensor unit measures a relative humidity, temperature, battery voltage and transmits data to display unit. Units contain a transceiver which operates in ISM band 868 MHz. Circuits are driven by 8-bits microcontroller Freescale.
|
10 |
Jednotka pro monitorování hodnoty indexu lomu vzduchu / Measurement unit for monitoring of refraction index of airHucl, Václav January 2012 (has links)
First part of this work is focused on the description exist methods for measuring refraction index of air. Second part deal with concrete problem realization measurement unit for monitoring of refraction index of air. Refraction index of air is measured indirect method which is based on a modified Edlen formula.
|
Page generated in 0.0226 seconds