Spelling suggestions: "subject:"shear metals""
1 |
Desenvolvimento computacional de um teste mecânico para caracterização do material através de análise inversa / Computational design of a technological mechanical test for material characterization by inverse analysis / Conception d’un essai mécanique pour la caractérisation du comportement d’un matériau par analyse inverseSouto, Nelson 09 October 2015 (has links)
Grâce au développement des méthodes de mesure de champs, de nouvelles stratégies d’identification de paramètres matériau de lois de comportement mécanique sont proposées, fondées sur l’utilisation d’essais mécaniques hétérogènes. Les champs de déformation hétérogènes développés au cours de ces essais permettent une meilleure caractérisation du comportement mécanique des tôles métalliques et, par conséquent, de réduire considérablement le nombre d’essais nécessaires pour identifier les paramètres matériau de modèles phénoménologiques complexes. Mais comment concevoir ces essais? Dans ce travail, une méthodologie d’optimisation pour le développement d’essais mécaniques hétérogènes est présentée. L’objectif principal est la conception, par analyse inverse et en proposant un indicateur représentatif des états de déformation, d’un essai capable de caractériser le comportement mécanique des tôles métalliques pour plusieurs états de contrainte et déformation. Pour cela, cette étude a été réalisée en considérant un matériau virtuel (acier doux sous forme de tôle mince), obtenu à partir de données expérimentales. En outre, un indicateur qui caractérise les essais mécaniques a été proposé pour être utilisé dans la méthodologie d’optimisation. D’un côté, le comportement mécanique de l’acier doux a été représenté avec un modèle phénoménologique complexe composé du critère anisotrope de plasticité Yld2004-18p, combiné à une loi d’écrouissage mixte et un critère macroscopique de rupture. Pour cette loi de comportement, un procédé d’identification des paramètres du matériau a été développé et le jeu de paramètres identifiés a été validé en comparant des résultats expérimentaux et numériques de l’emboutissage d’un godet cylindrique. D’un autre côté, un indicateur quantitatif pour évaluer l’information du champ de déformation des essais mécaniques a été formulé et sa pertinence a été évaluée à travers l’analyse numérique d’essais classiques et hétérogènes de la littérature. Concernant la méthodologie d’optimisation, deux approches différentes ont été considérées pour la conception de l’essai mécanique hétérogène. La première approche est fondée sur une procédure en une seule étape, où l’optimisation de la forme de l’éprouvette et des conditions aux limites, imposées par un outil, a été effectuée. La seconde approche est fondée sur une technique incrémentale en plusieurs étapes, en optimisant la forme de l’éprouvette et le chemin de déformation, par l’application des déplacements locaux. Les résultats obtenus sont comparés et un essai est retenu pour identifier les paramètres matériau, en utilisant le matériau virtuel comme référence, afin d’illustrer la pertinence de la démarche / With the development of full-field measurements methods, recent material parameters identification strategies call upon the use of heterogeneous tests. The inhomogeneous strain fields developed during these tests lead to a more complete mechanical characterization of the sheet metals, allowing the substantial reduction of the number of tests in the experimental database needed for material parameters identification purposes. In the present work, an innovative design optimization process for the development of heterogeneous tests is presented. The main goal is the design of a mechanical test able to characterize the material behavior of thin metallic sheets under several stress and strain paths and amplitudes. To achieve this aim, the study was carried out with a virtual material, though derived from experimental data. An indicator of the mechanical interest of the test was proposed, and was used in an optimization procedure to design both the boundary conditions and the sample shape. On the one hand, the virtual behavior of a mild steel was characterized using a complex phenomenological model composed by the Yld2004-18p anisotropic yield criterion combined with a mixed isotropic-kinematic hardening law and a macroscopic rupture criterion. An efficient material parameters identification process based on finite element model updating type was implemented and the identified parameters set was validated by performing a deep drawing test leading either to full drawing or rupture of the blank. On the other hand, an indicator which rates the strain field of the experiment by quantifying the mechanical information of the test was formulated. The relevance of the indicator was stressed out by the numerical analysis of already known classical as well as heterogeneous tests and the results obtained were validated by a material parameter sensitivity study. Two different optimization approaches were used for designing the heterogeneous test, namely (i) a one-step procedure designing both specimen shape and loading path by using a tool and (ii) a sequential incremental technique designing the specimen shape and the loading path of the specimen considering local displacements. The results obtained revealed that the optimization approach proposed was very promising for designing a single experiment able to fully characterize the several strain paths and amplitudes encountered in sheet metal forming processes.
|
2 |
Development of Criteria for Lamina Emergent Mechanism Flexures with Specific Application to MetalsFerrell, Devin Bradley 19 April 2010 (has links) (PDF)
This thesis introduces new revolute and torsional lamina emergent mechanism (LEM) flexure designs that are suited for use in metals. Previous LEM flexures have been designed for use in highly elastic materials, such as polymers. In extending LEM flexure designs to metals, a LEM flexure design criteria is also introduced. The LEM flexure criteria is based on relative performance between the LEM flexure and a performance datum which the LEM flexure must improve upon. This performance datum, or benchmark, is a section of lamina that is of the same overall length, width, and thickness as the LEM flexure. An analysis of the revolute and torsional metal LEM flexures, based on the LEM flexure criteria, is performed and both are found to successfully meet the criteria. A brief comparative performance study is also carried out between a basic crank-slider mechanism to which the revolute and torsional metal LEM flexures have and have not been applied. The revolute and torsional metal LEM flexures are found to improve the crank-slider performance.
|
3 |
Effect Of Constitutive Modeling In Sheet Metal FormingUcan, Meric 01 August 2011 (has links) (PDF)
This study focuses on the effects of different constitutive models in sheet metal forming operations by considering the cylindrical and square cup drawing and V-bending simulations. Simulations are performed using eight different constitutive models / elastic plastic constitutive model with isotropic hardening, elastic plastic constitutive model with kinematic hardening, elastic plastic constitutive model with combined hardening, power law isotropic plasticity, piecewise linear isotropic plasticity, Barlatthree-parameter, cyclic elastoplastic and Hill&rsquo / 48 model.The numerical analyses are accomplished by using three different 1 mm thick sheet materials / St12 steel, Al-5182 aluminum and stainless steel 409 Ni. An explicit finite element code is used in the simulations. For square cup drawing, three different blank holder forces / 2 kN, 4 kN and 5 kN are considered for St12 steel, whereas only 5 kN blank holder force is applied for stainless steel 409 Ni and Al-5182 aluminum.
A number of experiments are carried out and analytical calculations are utilized to evaluate the results of simulations. In cylindrical cup drawing, simulation results of different constitutive models show good agreement with analytical calculations for thickness strain and effective stress distributions. In square cup drawing, simulation results of all the models displayed good agreement with the experimental results for edge contour comparisons, although the distributions of effective stress vary for different models within the cup. The numerically and experimentally obtained springback amounts are also in good agreement. The simulation results obtained for piecewise linear isotropic plasticity and power law isotropic plasticity models show better agreement with the analytical solutions and experiments.
|
4 |
Nekonvenční technologie výroby řetězů / Unconventional production technology of chainsHostinský, Michal January 2015 (has links)
Unconventional technologies and their continual development brings along new possibilities in the manufacturing process. The submitted project is focused on solving problems in the procession of sheet metals in the manufacture of special parts of roller and conveyor chains. In the assessment of the technology of components, laser cutting was evaluated as the most optimal technology. With this goal, there was a public tender in terms of the purchase of a new machine designed for the manufacturing operations of the company of RETEZY Vamberk. This company ranks among the most major manufacturers of conveyor, roller and special chains in Europe.
|
5 |
Étude des phénomènes d'instabilités, bifurcation et endommagement en mise en forme des matériaux / Investigation of instability, bifurcation and damage phenomena in sheet metal formingBouktir, Yasser 28 October 2018 (has links)
L’objectif de ce sujet de thèse est de prédire l’apparition des instabilités plastiques (striction diffuse et striction localisée) dans les matériaux métalliques. Ces matériaux sont décrits par des modèles de comportement élasto-plastique couplés à l’endommagement. L'approche de Lemaitre, reliant l'endommagement à la déformation plastique équivalente et au taux de restitution de la densité d'énergie élastique, est adoptée. Parmi les différents critères et indicateurs qui sont considérés pour la prédiction des instabilités matériau, la théorie de bifurcation et les critères de type force maximum sont tout particulièrement analysés et comparés. Un objectif important de cette étude consiste à déterminer les mécanismes déstabilisants clés associés à cette modélisation du comportement, ainsi que l’impact des différents aspects physiques et des paramètres matériau sur l’apparition de la striction. Les développements résultants sont appliqués à une sélection représentative de matériaux métalliques afin prédire leurs limites de formabilités. Cette approche combinant des lois de comportement et critères de striction peut être utilisée comme outil théorique et numérique d’aide à la conception de nouveaux matériaux à ductilité améliorée / The aim of the present work is to predict the occurrence of plastic instabilities (diffuse and localized necking) in thin sheet metals. The prediction of these plastic instabilities is undertaken using an elastic–plastic model coupled with ductile damage, which is then combined with various plastic instability criteria theory. The bifurcation-based criteria and the maximum force criterion used in this work are formulated within a general three-dimensional modeling framework, and then applied for the particular case of plane-stress conditions for sheet metals. Some theoretical relationships or links between the different investigated necking criteria are established, which allows a hierarchical classification in terms of their conservative character in predicting critical necking strains. The resulting numerical tool is implemented into the finite element code ABAQUS/Standard to predict forming limit diagrams, in both situations of a fully three-dimensional formulation and a plane-stress framework. This approach, that combines constitutive equations to necking criteria, serves as a useful tool in the design of new materials with improved ductility
|
6 |
Experimental analysis and numerical fatigue modeling for magnesium sheet metalsDallmeier, Johannes 16 September 2016 (has links) (PDF)
The desire for energy and resource savings brings magnesium alloys as lightweight materials with high specific strength more and more into the focus. Most structural components are subjected to cyclic loading. In the course of computer aided product development, a numerical prediction of the fatigue life under these conditions must be provided. For this reason, the mechanical properties of the considered material must be examined in detail. Wrought magnesium semifinished products, e.g. magnesium sheet metals, typically reveal strong basal textures and thus, the mechanical behavior considerably differs from that of the well-established magnesium die castings. Magnesium sheet metals reveal a distinct difference in the tensile and compressive yield stress, leading to non-symmetric sigmoidal hysteresis loops within the elasto-plastic load range. These unusual hysteresis shapes are caused by cyclic twinning and detwinning. Furthermore, wrought magnesium alloys reveal pseudoelastic behavior, leading to nonlinear unloading curves. Another interesting effect is the formation of local twin bands during compressive loading. Nevertheless, only little information can be found on the numerical fatigue analysis of wrought magnesium alloys up to now.
The aim of this thesis is the investigation of the mechanical properties of wrought magnesium alloys and the development of an appropriate fatigue model. For this purpose, twin roll cast AM50 as well as AZ31B sheet metals and extruded ME21 sheet metals were used. Mechanical tests were carried out to present a comprehensive overview of the quasi-static and cyclic material behavior. The microstructure was captured on sheet metals before and after loading to evaluate the correlation between the microstructure, the texture, and the mechanical properties. Stress- and strain-controlled loading ratios and strain-controlled experiments with variable amplitudes were performed. Tests were carried out along and transverse to the manufacturing direction to consider the influence of the anisotropy. Special focus was given to sigmoidal hysteresis loops and their influence on the fatigue life. A detailed numerical description of hysteresis loops is necessary for numerical fatigue analyses. For this, a one-dimensional phenomenological model was developed for elasto-plastic strain-controlled constant and variable amplitude loading. This model consists of a three-component equation, which considers elastic, plastic, and pseudoelastic strain components. Considering different magnesium alloys, good correlation is reached between numerically and experimentally determined hysteresis loops by means of different constant and variable amplitude load-time functions.
For a numerical fatigue life analysis, an energy based fatigue parameter has been developed. It is denoted by “combined strain energy density per cycle” and consists of a summation of the plastic strain energy density per cycle and the 25 % weighted tensile elastic strain energy density per cycle. The weighting represents the material specific mean stress sensitivity. Applying the energy based fatigue parameter on modeled hysteresis loops, the fatigue life is predicted adequately for constant and variable amplitude loading including mean strain and mean stress effects. The combined strain energy density per cycle achieves significantly better results in comparison to conventional fatigue models such as the Smith-Watson-Topper model. The developed phenomenological model in combination with the combined strain energy density per cycle is able to carry out numerical fatigue life analyses on magnesium sheet metals.
|
7 |
Comportement des tôles métalliques à gradient de propriété sous chargement dynamique / Impact behavior of functionally graded multi-layered sheet metalsShi, Feifei 19 August 2015 (has links)
Cette étude vise à bien comprendre puis à modéliser le comportement mécanique dans une large plage de vitesse de déformation des tôles d’acier austénitique AISI304 ayant subis un traitement d'attrition mécanique de la surface (SMAT). Ces tôles ainsi traités sont des matériaux multicouches avec un gradient de propriétés. Les principaux résultats obtenus sont résumés comme suit:(1) La sensibilité globale à la vitesse déformation des tôles d’acier austénitique AISI304 traités avec SMAT est caractérisée par des essais de double cisaillement sous chargements quasi-statiques et dynamiques, qui permet d’atteindre une grande déformation sans instabilité géométrique. Des essais de double cisaillement sous impact sont réalisés à l’aide des barres de Hopkinson de grande diamètre et un système d’attache qui a une même impédance acoustique que la barre. Une sensibilité significative a été révélée et on observe ce renforcement n’a pas induit une réduction importante de la ductilité.(2) Dans le but d’un meilleur dépouillement de ces essais de double cisaillement, leur conditions d’essai est analysé dans le détaillé. Le modèle numérique avec le système d’attache a été construit pour étudier l’influence du système d’attache au début de chargement. On trouve un effet limité pour les diverses conditions imparfaites des essais comme la souplesse de système d’attache, des champs mécaniques non-homogènes, l’état de non-équilibre, etc. Par contre, les études numérique et analytique ont démontré que l’hypothèse simple de petites perturbations habituellement utilisé pour le dépouillement de ces essais n’est pas suffisamment précise. La déformation Eulérien cumulée doit être utilisée pour obtenir un résultat numérique correct. A partir de ce résultat, la sensibilité à la vitesse déformation des tôles d’acier austénitique AISI304 traités avec SMAT obtenue expérimentalement a été retouchée.(3) Un modèle multicouche elasto-plastique en dommageable a été proposé pour décrire le comportement des tôles d’acier austénitique AISI304 traités avec SMAT. Les paramètres sont identifiées à partir des essai de traction. La partie elasto-plastique est calée par une loi d’écrouissage de type Ludwig. Par contre, les paramètres d’endommagement sont obtenus avec une méthode d’identification inverse sur la base de simulation numérique de ces essais de traction. Pour valider ce modèle multi-couche elasto-plastique dommageable, un essai d’indentation/perforation est réalisé sur des tôles d’acier austénitique AISI304 traités avec SMAT. Des simulations numériques correspondantes montres que ce modèle multi-couche elasto-plastique en dommageable une prédiction plutôt précise de ces essais de d’indentation/perforation.(4) Pour évaluer la performance anti-perforation des tôles d’acier austénitique AISI304 traités avec SMAT, des essais de perforation sous impact a été réalisés avec des barres de Hopkinson. Des simulations numériques de ces essais de perforation sous impact sont réalisées avec un modèle numérique comparable avec le cas quasi-statique. ́tant donne que la sensibilité globale à la vitesse déformation des tôles d’acier austénitique AISI304 traités avec SMAT est caractérisée par des essais de double cisaillement, la sensibilité à la vitesse a été introduite dans le modèle multi-couche elasto-plastique en dommageable. Le résultat numérique correspond bien à la mesure expérimentale, ce qui indique non seulement l’efficacité du modèle numérique mais aussi celle du modèle multicouche elasto-plastique en dommageable. / This Ph.D dissertation aimed at the comprehensive understanding and the constitutive modeling of the mechanical behaviours of the surface mechanical attrition treatment (SMAT) treated AISI304 stainless steel sheet under a large range of loading rates. SMAT treated AISI304 stainless steel sheets are multi-layered functionally graded materials (FGM). The main research results and conclusions are summarized as followed:(1) The overall rate sensitivity SMAT treated AISI304 stainless steel sheet is characterized by the double shearing test under quasi-static and dynamic loading where a large strain can be achieved without geometry instability. Impact double shear test are performed with a large diameter Hopkinson bar system and an adapted equal-impedance clamping device. Significant rate sensitivity is found. It is also observed that such a rate enhancement does not induce an important reduction of the ductility.(2) In order to extract accurate material information from the double shear tests, their testing conditions are thoroughly analyzed using numerical simulation. Numerical models including clamping devices have been built to investigate the influence of this clamping device at the early stage of loading. A limited effect was found for various imperfect testing conditions such as the clamping device stiffness, non-homogeneous stress and strain fields, non-equilibrium state, etc. On the contrary, numerical and analytical study shows that the simple small strain assumption usually used in double shear tests are not accurate enough. Eulerian cumulated strain definition should be used to get consistent numerical results. From this finding, the experimental rate sensitivity obtained for the SMAT treated AISI304 stainless steel sheet are recalculated.(3) A multi-layers elastic plastic damageable constitutive model is proposed to model SMAT treated AISI304 stainless steel sheet. The parameters are identified using tensile testing results. The elastic plastic behavior is curve fitted with a simple Ludwig hardening model. However, the damage parameters should be identified using an inverse method on the basis of numerical simulation of these tensile tests. In order to validate this multi-layer elastic plastic damageable constitutive model, indentation/piercing tests on SMAT treated AISI304 stainless steel sheet are performed. Numerical simulation of this indentation/piercing tests is also realized. It is found that the identified multi-layer elastic plastic damageable constitutive model allows for a quite accurate prediction of the experimental piercing tests.(4) In order to evaluate the impact anti-piercing capacity of the SMAT treated AISI304 stainless steel sheet, the impact perforation tests using Hopkinson bar are carried out. Numerical simulation of these impact perforation tests are realized with a similar FEM model as the quasi-static case. As the rate sensitivity of SMAT treated AISI304 stainless steel sheet is experimentally characterized with double shear test, a rate sensitive multi-layer elastic plastic damageable constitutive model is introduced. The numerical results agree well with the experimental ones, which indicates the effectiveness of the numerical model as well as the rate sensitive multi-layer elastic plastic damageable constitutive model.
|
8 |
Experimental analysis and numerical fatigue modeling for magnesium sheet metalsDallmeier, Johannes 09 May 2016 (has links)
The desire for energy and resource savings brings magnesium alloys as lightweight materials with high specific strength more and more into the focus. Most structural components are subjected to cyclic loading. In the course of computer aided product development, a numerical prediction of the fatigue life under these conditions must be provided. For this reason, the mechanical properties of the considered material must be examined in detail. Wrought magnesium semifinished products, e.g. magnesium sheet metals, typically reveal strong basal textures and thus, the mechanical behavior considerably differs from that of the well-established magnesium die castings. Magnesium sheet metals reveal a distinct difference in the tensile and compressive yield stress, leading to non-symmetric sigmoidal hysteresis loops within the elasto-plastic load range. These unusual hysteresis shapes are caused by cyclic twinning and detwinning. Furthermore, wrought magnesium alloys reveal pseudoelastic behavior, leading to nonlinear unloading curves. Another interesting effect is the formation of local twin bands during compressive loading. Nevertheless, only little information can be found on the numerical fatigue analysis of wrought magnesium alloys up to now.
The aim of this thesis is the investigation of the mechanical properties of wrought magnesium alloys and the development of an appropriate fatigue model. For this purpose, twin roll cast AM50 as well as AZ31B sheet metals and extruded ME21 sheet metals were used. Mechanical tests were carried out to present a comprehensive overview of the quasi-static and cyclic material behavior. The microstructure was captured on sheet metals before and after loading to evaluate the correlation between the microstructure, the texture, and the mechanical properties. Stress- and strain-controlled loading ratios and strain-controlled experiments with variable amplitudes were performed. Tests were carried out along and transverse to the manufacturing direction to consider the influence of the anisotropy. Special focus was given to sigmoidal hysteresis loops and their influence on the fatigue life. A detailed numerical description of hysteresis loops is necessary for numerical fatigue analyses. For this, a one-dimensional phenomenological model was developed for elasto-plastic strain-controlled constant and variable amplitude loading. This model consists of a three-component equation, which considers elastic, plastic, and pseudoelastic strain components. Considering different magnesium alloys, good correlation is reached between numerically and experimentally determined hysteresis loops by means of different constant and variable amplitude load-time functions.
For a numerical fatigue life analysis, an energy based fatigue parameter has been developed. It is denoted by “combined strain energy density per cycle” and consists of a summation of the plastic strain energy density per cycle and the 25 % weighted tensile elastic strain energy density per cycle. The weighting represents the material specific mean stress sensitivity. Applying the energy based fatigue parameter on modeled hysteresis loops, the fatigue life is predicted adequately for constant and variable amplitude loading including mean strain and mean stress effects. The combined strain energy density per cycle achieves significantly better results in comparison to conventional fatigue models such as the Smith-Watson-Topper model. The developed phenomenological model in combination with the combined strain energy density per cycle is able to carry out numerical fatigue life analyses on magnesium sheet metals.
|
Page generated in 0.3244 seconds