No description available.

Industrin står för 32% av den globala energianvändningen och majoriteten av industrins utsläpp sker vid förbränning av fossila bränslen för värmeanvändning. Hälften av industrins värmeanvändning uppskattas vara i temperaturer upp till 400 °C vilket är lämpligt för värme från solfångare.Klädesindustrin står för 10% av de globala växthusgasutsläppen och majoriteten av de utsläppen sker vid textilproduktion och flera av textilindustrins processer är i temperaturintervall som kan använda värme från solfångare likt Absolicons T160.Data från energianvändning hos textilfabriker har samlats in och beräkningar på energianvändning och utsläpp har gjorts för erhållna data. Solfångarnas energiberäkningar har gjorts med hjälp av simuleringar från Absolicon applikation Field Simulator. En 3-stegs plan gjordes för 2 stora textilfabriker i Indien som visar hur de skulle kunna eliminera sina utsläpp från energianvändning.Kartläggningen visar att textilindustrin till stor del använder fossila bränslen och de 5 största textilfabrikerna i denna rapport visar en energifördelning mellan värme och el på 85% respektive 15%. Utsläppen per producerad massa varor i kg för de 5 fabrikerna uppskattas vara i snitt 6,1 kgCO2e vilket motsvarar en förbränning av 2,1 kg brunkol.De två stora textilfabriker i Indien samlade utsläpp från energianvändning redovisas vara 686 ktCO2e. Värmeanvändningen i fabrikerna sänks i 3-stegsplanen med 17% och fossila bränslen ersätts med värme från solfångare och biomassa. För att täcka 68% av det nya värmebehovet med värme från solfångare så behövs det solfångarfält med en termisk effekt på cirka 400 MW och en yta på cirka 1,3 km2. De resterande 32% av värmebehovet ska komma från förbränning av cirka 100 000 ton biomassa per år.Industrin har möjlighet att sänka stora delar av sina utsläpp genom att ersätta fossila bränslen i värmeanvändningen med till exempel värme från solfångare och biomassa. För att täcka stora delar av värmeanvändningen med solfångarfält behövs lediga ytor runt om och på fabrikerna. Fossila bränslen har i dagsläget ett lågt pris i förhållande till dess utsläpp och tillämpning av globala utsläppsrätter eller skatter bör appliceras för att påskynda omställningen till utsläppsfri energi och lägre utsläpp. / The industry sector accounts for 32% of the global energy usage where the majority of the energy is being used as heat. Most of the heat is generated by burning fossil fuels which leads to heat use being the largest source of emissions in the sector. About half of energy used as in the industries are in temperatures up to 400 °C which is suitable for heat provided by solar collectors.The apparel industry accounts for 10% of the global carbon emissions and multiple of the industry processes used in textile production are in temperature ranges reachable with solar collectors such as Absolicons T160.Energy data was collected from textile factories and calculations of energy usage and emissions was made. The calculations for solar collectors was made with Absolicons web application Field Simulator. A 3-step plan was created to demonstrate how two textile factories in India could reach zero CO2 emissions.The analysis shows that the textile industry’s majority of energy is being used from fossil fuels to generate heat where the 5 largest factories in this report average energy is 85% as heat and 15% as electricity. The emissions per produced mass of goods in kg is an average of 6,1 kgCO2e at these 5 factories which is comparable to burning 2,1 kg of black coal.The two large textile factories combined emissions from energy usage is reported to be 686 ktCO2e. In the 3-step plan the heat usage is reduced by 17% and heat from fossil fuels are replaced by heat from solar collectors and biomass. To cover 68% of the new energy demand it would require solar fields with a total thermal capacity of about 400 MW and an area of 1,3 km2. The remaining 32% of heat demand would be covered by burning 100 000 tonne of biomass per year.The conclusion is that he industry sector has a huge potential of reducing their emissions by replacing fossil fuels for generating thermal energy by thermal energy from e.g. solar collectors or biomass. It will require available spaces close to or on top of the factories to be able cover large portions of the heat demand with solar collectors. The current prices of energy from fossil fuels is low compared to their emissions and a global carbon market or taxes should be applied to accelerate the change to clean energy and lower emissions.

L’énergie solaire photovoltaïque concentré (CPV) est une solution de remplacement prometteuse aux structures solaires conventionnelles. Ce type de structure modulable doit être optimisé afin d’être compétitif par rapport aux autres types de production d’énergie. Les forces de vent demeurent la première préoccupation dans la conception de la structure porteuse en acier d’un tel système. L’objectif principal de cette recherche est d’assembler des outils numériques et analytiques afin de prédire les caractéristiques de sa réponse dynamique sous charges de vent turbulent. La maîtrise de cette étape est essentielle afin d’étudier d’une façon plus générique des solutions d’optimisation de la structure support par rapport à sa réponse dynamique sous charges de vent. Pour ce faire, la méthodologie principale de cette étude est composée en trois parties : (i) étude expérimentale à grandeur nature de la réponse globale sous les conditions réelles du vent ; (ii) développement des modèles d’analyse numérique dans lesquels les caractéristiques de structures réelles et des modèles de forces aérodynamiques adéquates sont prises en compte ; (iii) application des outils développés dans une étude paramétrique pour évaluer plusieurs solutions à partir de cas d’étude dans le contexte d’une conception préliminaire. Cette thèse est présentée sous forme de deux articles qui ont été soumis dans des revues évaluées par des comités de lecture ainsi que d’un article soumis et présenté dans un congrès international qui démontrent les contributions de cette recherche pour améliorer les pratiques de calcul des charges de vent sur des structures de concentration solaire non conventionnelles. Ces articles sont présentés comme suit (a) Étude expérimentale à échelle réelle de la réponse d’un prototype de concentrateur solaire sous charges de vent. Ce premier article a permis la validation de calcul des coefficients de forces aérodynamiques statiques et la révision des hypothèses de l’application du code ASCE 7-10 pour prédire les forces maximales agissant sur la structure dans la direction du vent ; (b) l’analyse temporelle de la réponse dynamique d’une structure de concentrateur solaire sous charges de vent. Cette étude a montré que le modèle et la méthode d’analyse développés selon des hypothèses simplifiées permettaient de prédire correctement les caractéristiques statistiques de la réponse dynamique mesurée en cohérence avec la méthode spectrale stochastique ; (c) Étude des effets des configurations structurales et des paramètres de vent sur l’optimisation de structure solaires sous charges de vent. Cette étude paramétrique a mis en évidence l’importance de l’effet des paramètres structuraux et ceux définissant le vent sur l’optimisation de la conception structural pour ce type de structure. Des recommandations pour optimiser l’action dynamique dans une phase de conception préliminaire ont été proposées. Ce projet de recherche a démontré finalement l’importance d’étudier d’une façon juste et pratique la réponse dynamique sous charges de vent qui mène à résoudre des préoccupations d’optimisation liées à différents types de structures d’énergie solaire en adoptant des hypothèses pratiques pour les ingénieurs. / Abstract : Concentrated Solar Photovoltaic (CPV) is a promising alternative to conventional solar structures. These solar traking structures need to be optimized to be competitive against other types of energy production. Wind action is the main concern in the design of the steel support structure of such movable system. The main purpose of this research is to assemble advanced numerical and analytical tools that allows realistic dynamic study of structures under wind loading. This help to study accurately optimized alternative in term of selecting structural and wind site conditions parameters. The methodology of the present study involves three main steps : (i) experimental full-scale study of the global response under real life wind conditions ; (ii) numerical modeling that captures the characteristics of the real structures and include the aerodynamic force models to conduct time-domain dynamic analyses ; (iii) preliminary design application that include the study of the effect of stuctural and wind parameters in optimizing the dynamic wind action and consequently the steel support structure. The thesis is presented as an ensemble of three articles written for refereed journals and a conference that showcase the contributions of the present study to thoroughly understand the wind load effect on these nonconventionnel structures. The articles presented are as follow (a) full-scale measurement of the response of a CPV tracker structure prototype under wind load. The results presented in this first article help design engineers to evaluate the use of the aerodynamic force coefficients for calculating wind load on similar structures and to apply properly the ASCE7-10 in evaluating the maximum design wind force using the equivalent static approach ; (b) time-domain analysis of solar concentrator structure under gust wind. This study showed that the developed time-domain model using simplified hypothesis could successfully predict the statistical parameters of the measured dynamic response in coherence with the stochastic spectral approach ; (c) effect of structure configurations and wind characteristics on the design of solar concentrator support structure under dynamic wind action. This parametric study highlighted the importance of selecting structural and wind parameters in order to minimize the dynamic action and the steel support structure. Recommendations for optimizing dynamic wind action in a preliminary design phase were proposed. The present research project has shown the need to study accurately wind response to solve optimization concerns related to different type of solar system structures. In addition, this study proposes simplified methods that are useful for practical engineers when there is the need to solve similar problems.

This work investigates the Fresnel-lens-based solar concentrator-receiver system in a multi-perspective manner to design, test and fabricate this concentrator with high-efficiency photon and heat outputs and a minimized effect of chromatic aberrations. First, a MATLAB®-incorporated algorithm optimizes both the flat-spot and the curved lens designs via a statistical ray-tracing methodology of the incident light, considering all of its incidence parameters. The target is to maximize the solar ray intensity on the receiver's aperture, and therefore, achieve the highest possible focal flux. The algorithm outputs prismatic and dimensional geometries of the Fresnel-lens concentrator, which are simulated by COMSOL® Multiphysics to validate the design. For the second part, a novel genetically-themed hierarchical algorithm (GTHA) has been investigated to design Fresnel-lens solar concentrators that match with the distinct energy input and spatial geometry of various thermal applications. Basic heat transfer analysis of each application decides its solar energy requirement. The GTHA incorporated in MATLAB® optimizes the concentrator characteristics to secure this energy demand, balancing a minimized geometry and a maximized efficiency. Two experimental applications were selected from literature to validate the optimization process, a solar welding system for H13 steel plates and a solar Stirling engine with an aluminum-cavity receiver attached to the heater section. In each case, a flat Fresnel-lens with a spot focus was algorithmically designed to supply the desired solar heat, and then a computer simulation of the optimized lens was conducted showing great comparability to the original experimental results. Thirdly, the prismatic geometry of the Fresnel lens was further optimized through a statistical approach that incorporates laws of light refraction and trigonometry. The proposed design produces high focal irradiance that is more suitable for thermal applications. The motivation was to enhance the tolerability of a flat Fresnel-lens concentrator to tracking errors, without the use of secondary optics or sophisticated, and normally costly, meticulous tracking equipment. A comparative simulation analysis was conducted for two case studies from literature, each with a different design method. Fresnel lenses optimized by this work enhanced the concentration acceptance product (CAP) significantly, compared to that in literature. Then, this work introduced an innovative code-based, detailed, and deterministic geometrical approach, which couples the optimization of the Fresnel lens primary optical element (POE) and the dome-shaped secondary optical element (SOE). The objective was to maximize the concentration acceptance product, while using the minimum SOE and receiver geometries at a given f-number and incidence angle (also referred to as the tracking error angle). The laws of polychromatic light refraction along with trigonometry and spherical geometry were utilized to optimize the POE grooves, SOE radius, receiver size, and SOE–receiver spacing. Two literature case studies were analyzed to verify this work's optimization, and the equivalent POEs designed by this work, with optimized SOEs, showed a significant enhancement in the CAP values compared to that of literature. Lastly, four methods for prototyping the Fresnel lens were discussed and experimentally tested; 3D printing, acrylic resin casting, direct CNC machining in acrylic and hot embossing. Once tested, the methods of CNC machining and hot embossing of acrylic proved to be the most promising in terms of cost, fabrication time, and concentration effectiveness. Future work will focus on enhancing the algorithmic design and improving the quality of lens fabrication.

El concentrador solar Fixed Mirror Solar Concentrator (FMSC) apareció en los años 70 con la finalidad de reducir costes en la producción de energía termoeléctrica. Este diseño consiste en un concentrador de reflector estacionario y foco móvil, presenta buena integrabilidad en cubiertas, y es capaz de alcanzar temperaturas entre 100 y 200ºC manteniendo una eficiencia aceptable. En esta tesis se expone una metodología para determinar el comportamiento del FMSC. Se ha desarrollado una herramienta de cálculo basada en el método de ray-tracing, que simula el trazado de los rayos solares en el sistema óptico. Con esta herramienta se ha analizado el comportamiento óptico y térmico del FMSC, y de la versión con espejos curvos Curved Slats Fixed Mirror Solar Concentrator (CSFMSC). Se ha realizado un análisis paramétrico para conocer la influencia de los distintos parámetros en el modificador de ángulo (IAM), y para obtener los diseños óptimos a una temperatura de 200ºC para tres climas en diferentes latitudes. Se han comparado los valores teóricos obtenidos mediante ray-tracing con dos prototipos ensayados, obteniendo un buen ajuste en ambos casos. Los ensayos han sido utilizados para determinar la curva de rendimiento de uno de los prototipos. Se ha hecho uso del método propuesto en la norma EN-12975-2:2006, combinado con valores de IAM obtenidos mediante ray-tracing. Se prueba que esta combinación puede ser útil para obtener la curva de rendimiento de colectores complejos con un modelo biaxial para el IAM. / The Fixed Mirror Solar Concentrator (FMSC) appeared during the 70s with the aim of reducing costs in the production of electricity in solar thermal power plants. This design consists of a concentrator with fixed reflector and moving receiver, has a very good integrability into building roofs and can reach temperatures between 100 and 200ºC with an acceptable efficiency. In this Thesis a methodology is presented for the determination of the behaviour of the FMSC. A simulation tool based on the forward ray-tracing method has been developed. The optical and thermal behaviour of the FMSC and its curved mirror variation called the Curved Slats Fixed Mirror Solar Concentrator (CSFMSC), have been analyzed with this tool. A parametric analysis has been carried out in order to determine the influence of the different parameters on the Incidence Angle Modifier (IAM) and to determine the optimal designs at a temperature of 200ºC for three different climates at different latitudes. The theoretical values obtained from the ray-tracing code have been compared with two experimental prototypes. The experimental and numerical results obtained show a good fit. The efficiency curve of one of the prototypes has been determined from the experimental tests. The methodology proposed in the norm EN-12975-2:2006 has been used in combination with IAM values obtained by ray-tracing. It has been shown that this combination can be effectively used to obtain the efficiency curve of complex collectors with a bi-axial IAM model.