11 |
Design and implementation of a modular converter with application to a solid state transformerWolf, Marko 12 1900 (has links)
Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2009. / ENGLISH ABSTRACT: The purpose of a solid state transformer (SST) is to use power electronic converters to mimic
the operation of the conventional distribution transformer. These power electronic converters
are proposed to overcome the disadvantages of the conventional distribution transformer. The
advantages of a SST include near perfect voltage regulation and harmonic isolation between the
primary and secondary windings of the transformer.
This thesis discusses the design and development of the different converters in a solid state
transformer (SST). A prototype modular back-to-back converter is developed for the input and
isolation stage of the SST. The isolation stage consists of a high voltage DC-DC converter, which
transfers power across the isolation barrier of the SST. This stage is evaluated in the laboratory
with special attention being paid to the efficiency of the converter.
The second aspect that this thesis addresses is the output stage of the SST, namely a three
phase inverter. The discussion of the output stage focuses on the losses occurring in the inverter.
The switching device losses are calculated by means of an adapted numerical method as opposed
to using conventional analytical methods. The presented numerical method is compared to the
existing analytical method and the findings are discussed.
A double loop control strategy is implemented for the output stage inverter. The inner
current loop utilizes a predictive control strategy. The control analysis of the double loop
controller is discussed and evaluated in the laboratory. All the converters that are discussed in
this thesis are evaluated in the laboratory and the relevant measurements are included. / AFRIKAANSE OPSOMMING: Die doel van ’n drywingselektroniese transformator (DET) is om drywingselektroniese omsetters
te gebruik om die werking van die konvensionele distribusietransformator na te boots. Hierdie
drywingselektroniese omsetters word voorgestel ten einde die nadele van die konvensionele distribusietransformator
te bowe te kom. Die voordele van ’n DET sluit in: feitlik perfekte regulering
van spanning en harmoniese isolasie tussen die primˆere en sekondˆere windings van die
transformator.
Hierdie tesis bespreek die ontwerp en ontwikkeling van die verskillende omsetters in ’n drywingselektroniese
transformator (DET). ’n Prototipe modulˆere rug-aan-rug-omsetter word ontwikkel
vir die intree- en isolasiefase van die DET. Die isolasiefase bestaan uit ’n hoogspanning-
GS-GS omsetter, wat drywing oor die isolasiegrens van die DET heen oordra. Hierdie omsetter
word in die laboratorium ge¨evalueer met besondere aandag aan die doeltreffendheid van die
omsetter.
Die tweede aspek waarna in hierdie tesis gekyk word, is die uittreefase van die DET, naamlik
’n driefaseomsetter. Die bespreking van die uittreefase fokus egter op die verliese wat in die omsetter
voorkom. Die verliese van die skakelaars word bereken deur middel van ’n aangepaste numeriese
metode teenoor die gebruik van konvensionele analitiese metodes. Die numeriese metode
wat aangebied word, word vergelyk met die bestaande analitiese metode en die bevindings word
bespreek.
’n Dubbellus-beheerstrategie word vir die uittreefase-omsetter ge¨ımplementeer. Die binneste
stroomlus word ge¨ımplementeer deur van ’n voorspelbare beheerstrategie gebruik te maak. Die
beheeranalise van die dubbellusbeheerder word bespreek en in die laboratorium ge¨evalueer. Al
die omsetters wat in hierdie tesis bespreek word, word in die laboratorium ge¨evalueer en die
relevante metings word ingesluit.
|
12 |
Transformador de estado sólido no controle de fluxo de potência em redes de distribuição /Godoi, Lucas Antonio Alves de January 2018 (has links)
Orientador: Júlio Borges de Souza / Resumo: O transformador de estado sólido tem se apresentado como uma ferramenta indispensável na construção das novas redes elétricas inteligentes, uma vez que essa nova estrutura de rede altera o layout tradicional, viabilizando a conexão de fontes de energia descentralizadas. Contudo, essa conexão de sistemas de geração distribuída na rede originou a bidirecionalidade do fluxo de potência, resultando em um novo panorama para as atividades de operação e manutenção das redes para as distribuidoras de energia. A análise dos possíveis impactos técnicos gerados na rede de distribuição deve ser realizada, com o intuito de garantir um nível de qualidade energética dentro dos padrões estabelecidos pela Agência Nacional de Energia Elétrica – ANEEL. Dentre os impactos, destacam-se a elevação do nível de tensão e a alteração do fator de potência, ambos, produzidos pelo excesso de potência injetada na rede por este novo cenário de geração de energia. Nesse contexto, esta dissertação tem como principal objetivo analisar o comportamento de uma rede de distribuição genérica com penetração de geração distribuída e avaliar o perfil de tensão diante de diferentes níveis de inserção dessa geração na rede. As características de ajuste de tensão instantânea e capacidade de interação com sistemas de armazenamento que o transformador de estado sólido possui foram empregadas no auxílio da regulação dos níveis de tensão que se apresentaram fora dos padrões determinados pela resolução 794/2018 da ANEEL, qua... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The solid state transformer has been presented as an essential tool in the construction of new intelligent electric grids, since this new network structure changes the traditional layout, making possible the connection of decentralized energy sources. However, this connection of distributed generation systems in the network created the bidirectionality of the power flow, resulting in a new panorama for the power distributors concerning the networks activities of operation and maintenance. The analysis of the possible technical impacts generated in the distribution network should be carried out with the purpose of guaranteeing a level of energy quality within the standards established by the National Electric Energy Agency (ANEEL). Among the impacts, we highlight the elevation of the voltage level and the change in the power factor, both produced by the excess power injected into the grid by this new energy generation scenario. In this context, the main objective of this dissertation is to analyze the behavior of a generic distribution network with distributed generation penetration and to evaluate the voltage profile before different levels of insertion of this generation in the network. The solid state transformer has instantaneous voltage adjustment characteristics and interaction capacity with storage systems, which were used to aid in the regulation of voltage levels that were out of the standards determined by ANEEL resolution 794/2018, when a high level of distributed g... (Complete abstract click electronic access below) / Mestre
|
13 |
Transformador de estado sólido no controle de fluxo de potência em redes de distribuição / Solid state transformer in control of power flow in distribution networksGodoi, Lucas Antonio Alves de 17 April 2018 (has links)
Submitted by Lucas Antonio Alves De Godoi (luksg@hotmail.com) on 2018-07-11T15:22:59Z
No. of bitstreams: 1
Dissertação_Lucas _Godoi.pdf: 3300304 bytes, checksum: 429eb486ffbb167f9c7394e2d2e4b6f6 (MD5) / Approved for entry into archive by Cristina Alexandra de Godoy null (cristina@adm.feis.unesp.br) on 2018-07-11T17:29:00Z (GMT) No. of bitstreams: 1
godoy_laa_me_ilha.pdf: 3300304 bytes, checksum: 429eb486ffbb167f9c7394e2d2e4b6f6 (MD5) / Made available in DSpace on 2018-07-11T17:29:00Z (GMT). No. of bitstreams: 1
godoy_laa_me_ilha.pdf: 3300304 bytes, checksum: 429eb486ffbb167f9c7394e2d2e4b6f6 (MD5)
Previous issue date: 2018-04-17 / O transformador de estado sólido tem se apresentado como uma ferramenta indispensável na construção das novas redes elétricas inteligentes, uma vez que essa nova estrutura de rede altera o layout tradicional, viabilizando a conexão de fontes de energia descentralizadas. Contudo, essa conexão de sistemas de geração distribuída na rede originou a bidirecionalidade do fluxo de potência, resultando em um novo panorama para as atividades de operação e manutenção das redes para as distribuidoras de energia. A análise dos possíveis impactos técnicos gerados na rede de distribuição deve ser realizada, com o intuito de garantir um nível de qualidade energética dentro dos padrões estabelecidos pela Agência Nacional de Energia Elétrica – ANEEL. Dentre os impactos, destacam-se a elevação do nível de tensão e a alteração do fator de potência, ambos, produzidos pelo excesso de potência injetada na rede por este novo cenário de geração de energia. Nesse contexto, esta dissertação tem como principal objetivo analisar o comportamento de uma rede de distribuição genérica com penetração de geração distribuída e avaliar o perfil de tensão diante de diferentes níveis de inserção dessa geração na rede. As características de ajuste de tensão instantânea e capacidade de interação com sistemas de armazenamento que o transformador de estado sólido possui foram empregadas no auxílio da regulação dos níveis de tensão que se apresentaram fora dos padrões determinados pela resolução 794/2018 da ANEEL, quando um alto nível de geração distribuída foi inserido na rede. / The solid state transformer has been presented as an essential tool in the construction of new intelligent electric grids, since this new network structure changes the traditional layout, making possible the connection of decentralized energy sources. However, this connection of distributed generation systems in the network created the bidirectionality of the power flow, resulting in a new panorama for the power distributors concerning the networks activities of operation and maintenance. The analysis of the possible technical impacts generated in the distribution network should be carried out with the purpose of guaranteeing a level of energy quality within the standards established by the National Electric Energy Agency (ANEEL). Among the impacts, we highlight the elevation of the voltage level and the change in the power factor, both produced by the excess power injected into the grid by this new energy generation scenario. In this context, the main objective of this dissertation is to analyze the behavior of a generic distribution network with distributed generation penetration and to evaluate the voltage profile before different levels of insertion of this generation in the network. The solid state transformer has instantaneous voltage adjustment characteristics and interaction capacity with storage systems, which were used to aid in the regulation of voltage levels that were out of the standards determined by ANEEL resolution 794/2018, when a high level of distributed generation was inserted into the network.
|
14 |
Une Topologie CA-CC Baseé sur un Convertisseur Modulaire Multiniveau Entrelacé Faisible à Applications de Transformateur d’Électronique de Puissance / An AC-DC Topology Based on an Interleaved Modular Multilevel Converter Feasible to Solid-State Transformer ApplicationsRabelo joca, Davi 11 January 2019 (has links)
Ce travail concerne l'étude théorique,l’analyse numérique et la validationexpérimentale d'une topologie de convertisseurd’électronique de puissance basée sur unconvertisseur multiniveau modulaire entrelacéavec transformateur moyenne fréquence.L’architecture est adaptée pour l’étage deconversion AC-DC dans les applications detransformateur d'électronique de puissance pourla connexion entre un réseau alternatif moyennetension et un réseau continu basse tension.L’entrelacement réduit les pertes par conductiondans les interrupteurs. Le transformateurmoyenne fréquence 10 kHz assure une isolationgalvanique et connecte le convertisseurmultiniveau modulaire entrelacé à unconvertisseur pont complet. Avec comme pointde départ la structure, le principe defonctionnement, la modélisation, la technique demodulation et le schéma de commande sontdiscutés. Une caractéristique du convertisseur estla génération simultanée de la tension du réseaubasse fréquence et de la tension primaire dutransformateur moyenne fréquence.L'équilibrage de la tension des condensateurs etla minimisation du courant de circulation sontcombinés dans un seul algorithme. La commanderégule le courant alternatif et la tension du buscontinu, du côté haute tension, ainsi que latension continue et le flux de puissance, du côtébasse tension. La validation expérimentale duconvertisseur est réalisée avec un prototype de720 W monophasé à l’échelle réduite. Lesrésultats démontrent la stabilité du système decommande lors d'opérations en régimepermanent et dynamiques (pas de charge,inversion du flux de puissance). / This work aims to present thetheoretical study, the numerical analysis and theexperimental validation of a power electronicsconverter topology based on an interleavedmodular multilevel converter with mediumfrequencytransformer. The architecture issuitable for the AC-DC stage in solid-statetransformer applications for the connectionbetween a medium-voltage AC grid and a lowvoltageDC grid. The interleaving reduces theswitch conduction losses. The 10 kHz mediumfrequencytransformer provides galvanicisolation and connects the interleaved modularmultilevel converter to a full-bridge converter.From the converter structure, the principle ofoperation, the modeling, the modulationtechnique, and the control scheme are discussed.One feature of the converter is the simultaneousgeneration of the low-frequency grid voltageand the medium-frequency transformer primaryvoltage. The capacitor voltage balancing and thecirculating currents minimization are combinedtogether in a single algorithm. The controlsystem regulates the AC current and the DC busvoltage, on the high-voltage side, and the DCvoltage and power flow, on the low voltage side.The experimental validation of the converter ismade with a scaled-down single-phase 720 Wprototype. The results demonstrate the controlsystem stability in steady-state and dynamic(load step, power flow inversion) operations.
|
15 |
Projeto e desenvolvimento de fontes auxiliares para transformadores de estado sólido / Design and development of auxiliary power supply for solid state transformersKehler, Leandro Becker 31 August 2015 (has links)
This master thesis presents the development of an auxiliary power supply to provide energy to sensors, gate drivers, instrumentation circuits and control of a three-stage Solid State Transformer (SST). These devices require an insulated power supply of ±15V and 5V. For reason of reliability and modularity, a distributed auxiliary source is proposed. Thus, it is necessary a power supply to provide energy to the low voltage (LV) side and another to the medium voltage (MV) side. With this proposal, the auxiliary power supply does not need to have the same galvanic insulation of the SST, 25kV. However, a local power supply must operate at high voltage levels and, consequently, contain a high step-down voltage gain. Relative to LV side, the most generally used topologies as an auxiliary power supply are discussed. However, these topologies cannot be used at the MV converters, due to the high voltage stress levels involved. A study of topologies used on medium and high voltage and which enable to reach a high step-down voltage gain is realized, and two interesting topologies for this application were found. One of them uses a Flying capacitor converter connected in cascade with a Double-Ended Flyback converter. The Flying capacitor converter lowers the DC bus voltage in a controlled manner to low voltage levels. So the Double-ended Flyback converter operates in LV and provides the insulated outputs to command circuits of SST. The other topology is a unidirectional four-level NPC converter operating as Double-ended Flyback converter. For this case, a modulation strategy that allows the converter to reach a high step-down voltage gain was also proposed. These topologies were evaluated and the one which showed the best result was the four-level Double-ended Flyback converter. This converter was implemented and the experimental results prove to be effective. For the LV side, a Half-bridge LLC resonant converter as auxiliary power supply was used. This converter operates in ZVS and performs the output voltage regulation through the operating frequency variation. The experimental results of this converter are also presented. / Este trabalho de mestrado apresenta o desenvolvimento de fontes auxiliares para alimentar sensores, circuitos de comando, instrumentação e o controle de um Transformador de Estado Sólido (SST) de três estágios. Estes dispositivos necessitam de alimentação isolada com tensões de ±15V e 5V e por questões de confiabilidade e modularidade, propõe-se a utilização de fontes auxiliares distribuídas. Assim, emprega-se uma fonte auxiliar para alimentar o lado de média tensão (MT) e outra para alimentar o lado de baixa tensão (BT). Com essa proposta, as fontes auxiliares não necessitam ter a mesma isolação galvânica do SST, 25kV. Entretanto, uma das fontes locais deve operar em níveis de tensão elevados e, por consequência, apresentar baixo ganho estático. No lado de BT, as principais topologias normalmente utilizadas como fonte auxiliar são discutidas. No entanto, devido aos altos níveis de tensão envolvidos, estas topologias não podem ser aplicadas ao conversor que opera em MT. Um estudo sobre topologias aplicadas a média tensão e que possibilitam alcançar um baixo ganho estático é realizado, sendo que duas topologias se mostram interessantes para esta aplicação. Uma consiste na utilização de um conversor de capacitores flutuantes conectado em cascata com um conversor Double-Ended Flyback. O conversor de capacitores flutuantes rebaixa a tensão do barramento CC, de forma controlada, para baixa tensão. Assim o Double-Ended Flyback opera em BT e fornece as saídas isoladas para alimentar os circuitos de comando do SST. A outra topologia trata-se de um conversor NPC de quatro níveis unidirecional operando como conversor Double-Ended Flyback. Para este caso, também foi proposta uma estratégia de modulação que permite o conversor alcançar o baixo ganho estático. Essas topologias foram avaliadas, apresentando melhor resultado a esta aplicação o conversor Double-ended Flyback de quatro níveis, conforme será demonstrado neste trabalho. Esse conversor foi implementado e os resultados experimentais comprovam o seu funcionamento. Para a fonte do lado de BT utilizou-se um conversor Half-Bridge LLC ressonante que opera em ZVS e realiza a regulação da tensão de saída pela variação da frequência de operação. Os resultados experimentais deste conversor também são apresentados.
|
Page generated in 0.1098 seconds