Thesis: Sc. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 1978 / Vita. / Includes bibliographical references. / Sc. D. / Sc. D. Massachusetts Institute of Technology, Department of Materials Science and Engineering

A detailed study has been carried out to investigate the dissolution characteristics of unstabilized and stabilized CrO₂ particles. It has been found that on contact of CrO₂ with aqueous solutions, it dissolves by disproportionation reaction to HCrO₄ and Cr2O₃. XPS study has shown that stabilization of CrO₂ particles with bisulfite solution leads to the formation of Cr2O₃. However, because of agglomeration of the CrO₂ particles due to their magnetic properties, not all of the surface is completely stabilized. The electrokinetic characteristics of Cr(IV) and Cr(III) oxides in aqueous solutions have been investigated. Experiments suggest that sulfite ions chemisorb strongly on Cr₂O₃ particles. Experiments have also been carried out to study the adsorption of sodium dodecyl sulfate (SDS) on Cr₂O₃ particles. With increasing SDS concentration, Cr₂O₃ becomes less positively charged and ultimately negatively charged when the surfactant concentration exceeds 10⁻³ M. This suggests that SDS specifically adsorbs onto the oxide.

Master of Science / Department of Physics / Christopher M. Sorensen / Gold Nanoparticles (AuNP) 5nm in diameter, ligated with n-dodecanethiol, were dissolved in various hydrocarbon solvents including normal alkanes from n-hexane to n-hexadecane as well as two aromatics, toluene and para-xylene. These solutions were centrifuged at room temperature under 12000g acceleration for one hour to separate larger clusters from AuNP monomers dissolved in the supernatants. UV-Vis absorbance data were taken on the supernatants and were then converted to concentrations in moles of Au atoms/L. These concentrations correspond to the saturated concentration of dissolved AuNP monomers in equilibrium with a precipitate at room temperature. For the alkanes, we discovered a non-monotonic functionality of saturated concentration vs. solvent chain length with a maximum corresponding to n-dodecane. This agreed with predictions made of the ligands’ interactions with the solvents based on comparisons of solubility parameters where the n-dodecanethiol ligands were approximated as n-dodecane. The concentrations of AuNPs when dissolved in the aromatics did not follow the trend predicted by solubility parameters.

Doctor of Philosophy / Department of Chemistry / Christer B. Aakeroy / Supramolecular synthesis relies upon the creative and rational use of the common intermolecular forces and a proper understanding of these forces is critical for design and assembly of molecular building blocks into extended networks. The strength of seven substituted pyridines as hydrogen-bond acceptors was probed using a series of fifteen mono/dicarboxylic acids to demonstrate the interrelationship between the charge on the substrate and its ability to form co-crystals/salts. The higher charge in the acceptor led to proton transfer (100% yield) from the hydrogen bond donor to give a salt, whereas the lower charge led to co-crystals. This specificity observed for small molecules was extended to an investigation of selectivity in ditopic molecules. A series of nineteen hydrogen-bond donors, including fifteen carboxylic acids and four cyanoximes, were tested for binding preferences against ten ditopic ligands with variable charges. The overall supramolecular yield of 82% (9/11) proved a high degree of reliability in terms of best acceptor/donor approach, hence establishing the efficiency of the calculated charges as a guideline for molecular recognition processes. Solubility and thermal properties of pharmaceutical drug mimics were altered via formation of co-crystals/salts. The ligands and their co-crystals/salts with five even-chain dicarboxylic acids were synthesized and their comparative solubility in pure water and in pH 6.8 buffer solution measured. Solubility enhancement to a degree of 9x is observed for pharmaceutical drug haloperidol, whereas decrease in solubility down to 81% is achieved for 2-amino-5-(3-pyridyl)pyrimidine (which has agrochemical significance). Also the thermal and solubility behavior of these co-crystals were shown to reflect the properties of their parent co-crystallizing agents, allowing for a modulation of physical properties. Finally, the specificity and selectivity of the intermolecular interactions observed for small molecules were applied in the synthesis of hydrogen and halogen-bonded capsules. Several resorcinarene-based cavitands were synthesized and their upper rim decorated with acetamidopyridyl, aminopyrazinyl, 3-pyridyl, and 4-pyridyl moieties with hydrogen and halogen-bonding potentials. A homomeric hydrogen-bonded capsule was formed with self-assembly of acetamidoethynylcavitand via N-H···O=C interactions, whereas a heteromeric halogen-bonded capsule, the very first of its kind, was formed with N···I halogen-bonded interaction between 3-pyridylcavitand and tetrafluoroiodo-substituted calixarene.

Expressing foreign proteins in E.coli is a major challenge because they often tend to develop into unsolvable and inactive proteins. They aggregate into so called  inclusion bodies which prevent expression of the protein. This problem might be avoided by fusing the gene of the foreign protein with a soluble protein called solubility tags, which  function is to enhance the solubility of the foreign protein. This report investigates whether Sterol Carrier Protein-2 (SCP-2) could function as a solubility tag. The experiment was carried out by fusing SCP-2 to two recombinant proteins, Green fluorescent protein (GFP) and a form of chloroamphenicol acetyl transferase (CATΔ9). The gene fusion was then inserted into a pET-15 vector and transformed into  the E.coli strain BL21(DE3) to be expressed. The results obtained from Western blot and PageBlue staining indicates that SCP-2 does not enhance the solubility of GFP or CATΔ9 since neither of them was expressed.  Furthermore, previous studies have shown that GFP can in fact be expressed  usingmaltose binding protein (MBP) as a solubility tag. Unfortunately, no success has been made regarding CATΔ9. In conclusion, regarding the results from this report, SCP-2 does not function as a solubility tag. However, further studies should be carried out on SCP-2 with more experiments before rejecting the possibility to use SCP-2 as a solubility tag.

Thesis (MSc)--University of Stellenbosch, 2005. / ENGLISH ABSTRACT: Chemical and molecular tagging agents have illustrated their diversity in a number of different applications. One of the most significant applications includes the use of chemical tagging agents for product registration in industry. Industrial enterprises producing good products need to ensure product authenticity to prevent duplication through piracy and unscrupulous industrialists. Fluorescent probes are chemical compounds that satisfy most of the technical and commercial aspects that are required to be excellent tagging agents. They are generally quick to synthesize, do not affect the product integrity, display little or no impact on the uses of the product or the environment and they can be identified by relatively simple detection procedures. The aim of the present study was to synthesize fluorescent polymers as tagging agents for the paint industry. 7-Hydroxy-2H-chromen-2-one (A1) and 7-hydroxy-4-methyl-2H-chromen-2-one (B1), commercially available fluorescent hydroxyl compounds, were selected as the starting materials. An esterification reaction resulted in the production of 2-oxo-2H-chromen-7-yl acrylate (A2) and 4-methyl-2-oxo-2H-chromen-7-yl acrylate (B2), which are acrylic-type monomers that were required for polymerisation. Studies showed that fluorescence was maintained during the esterification. Copolymers poly(MMA-co-A2), poly(MMA-co-B2), poly(BA-co-A2) and poly(BA-co-B2), synthesized via homogeneous free radical initiated copolymerisation, revealed how copolymer compositions were affected by the feed compositions and the pattern of monomer incorporation over time. This was investigated by following individual monomer consumption rates by 1H-NMR spectroscopy. Fluorescence studies revealed that the fluorescence behaviour of A2 and B2 was maintained during the copolymerisation. Latex particles, with fluorescent behaviour, were synthesized via in situ miniemulsion polymerisation. High molecular weight copolymers with monodisperse particle sizes (nm range) were obtained. A bench-top UV lamp and UV-reflectance studies confirmed the fact that fluorescent latex particles can be identified and quantified respectively, when dispersed in paints that are either free of titanium dioxide or paints that contain titanium dioxide. / AFRIKAANSE OPSOMMING: Die diversiteit van chemiese en molekulêre merkers in ‘n verskeidenheid van toepassings is al telkemale geïllustreer. Een van die mees belangrike toepassings in die industrie is die gebruik van chemiese merkers vir produkregistrasie. Industrieë wat goeie produkte verskaf moet die egtheid van hul produkte kan verseker deur duplikasie via nadruk (Eng: piracy) deur ander te voorkom. Fluoresserende merkers is chemiese stowwe wat aan die meeste van die tegniese en kommersiële vereistes voldoen om as uitstekende merkers te dien. Die sintese van die merkers is gewoonlik nie tydrowend nie, beïnvloed nie die integriteit van die produk nie, het min of geen impak op die gebruike van die produk of die omgewing en kan deur relatief eenvoudige prosedures bepaal word. Die doel van hierdie studie was die sintese van fluoresserendepolimere om as merkers in die verfindustrie te dien. 7-Hidroksie-2H-chromen-2-oon (A1) en 7-hidroksie-4-metiel-2H-chromen-2-oon (B1), fluoresserende hidroksielverbindings wat kommersieël beskikbaar is, is gekies as uitgangstowwe vir die bereiding van die merkers in hierdie studie. ‘n Esterifikasie-reaksie het gelei tot die produksie van 2-okso-2H-chromen-7-ielakrilaat (A2) en 4-metiel-2-okso- 2H-chromen-7-ielakrilaat (B2). Hierdie produkte is tipiese akrilaat-tipe monomere wat benodig word vir polimerisasie. Ondersoeke het getoon dat fluoressensie behoue tydens esterifikasie gebly het. Die kopolimere poli(MMA-ko-A2), poli(MMA-ko-B2), poli(BA-ko-A2) en poli(BA-ko-B2) is deur homogene vry-radikaal-geïnisieerde kopolimerisasie gesintetiseer. Daar is vasgestel hoe die kopolimeersamestelling geaffekteer is deur die samestelling van die reagense (Eng: feed composition) en die patroon van monomeer inkorporasie met tyd. Dit was ondersoek deur die tempo van verbruik van die individuele monomere d.m.v. 1H-KMR spektroskopie te bepaal. Daar is verder vasgestel dat die fluoressensie van A2 en B2 gedurende kopolimerisasie behoue gebly het. Latekspartikels, met fluoressensie gedrag, is via in-situ mini-emulsie-polimerisasie gesintetiseer. Hoë molekulêre massa kopolimere met monodisperse partikelgroottes (in die order van nanometers) is verkry. Deur van ‘n UV-lamp en UV-refleksie studies gebruik te maak is daar bepaal dat fluoresserende latekspartikels in polimere, in verf - wat of titaniumdioksied bevat of geen titaniumdioksied bevat nie -, beide geïdentifiseer and gekwantifiseer kan word.

Expression of foreign proteins in host organisms usually results in the development of insoluble, inactive proteins. Further, these proteins have a tendency to form aggregates termed inclusion bodies. However, the formation of inclusion bodies can be avoided by fusing the gene encoding the foreign protein to a highly soluble protein. In this report Sterol Carrier Protein-2 (SCP-2) is reviewed as a possible solubility tag. The experiment was carried out by fusing SCP-2 to one of two i nsoluble proteins, Green fluorescent protein (GFP) or a form of chloramphenicol acetyl transferase (CAT∆9). The protein fusion was then inserted into the vector pET-15b, transformed in Escherichia coli and the yield of actively expressed protein was measured. The results obtained from this study, as evaluated by PageBlue staining and  Western blot, are indicating that SCP-2 does not improve the solubility of GFP or CAT∆9. Nonetheless, the solubility of GFP has earlier been increased by fusing it to the solubility tag maltose-binding protein (MBP).  Producing more soluble forms of CAT∆9  have also been tested but without success. Therefore the conclusion drawn from this experiment is that SCP-2 does not work as a solubility tag, however more research must be performed to conclude this with certainty.

Over recent years the delivery of nanosized drug particles has shown potential in improving bioavailability. Drug nanosizing is achieved by 'top-down' and by 'bottom-up' approaches. Owing to limitations associated with the top-down techniques, such as high energy input, electrostatic effects, broad particle size distributions and contamination issues, great interest has been directed to alternative bottom up technologies. In this study, the hypothesis that microreactors can be used as a simple and cost-effective technique to generate organic nanosized products is tested using three steroids (hydrocortisone, prednisolone and budesonide). Arrested antisolvent nanoprecipitation using ethanol (solvent) and water (antisolvent) was conducted within the microreactors. To enable experimental design for the microreactor studies, solubility profiles in different ethanol-water combinations at 25 °C were explored. All three drugs' solubility increased with increasing ethanol concentration showing maxima at 80-90 % v/v ethanol-water mixtures. Because of the complex multivariate microfluidic process, artificial neural network modelling was then employed to identify the dominant relationships between the variables affecting nanoprecipitation (as inputs) and the drug particle size (as output). The antisolvent flow rate was found to have the major role in directing drug particle size. Based on these successful findings, the potential of preparing pharmaceutical nanosuspensions using microfluidic reactors was researched. A hydrocortisone (HC) nanosuspension (NS) was prepared by introducing the generated drug particles into an aqueous solution of stabilizers stirred at high speed with a propeller mixer. A tangential flow filtration system was then used to concentrate the prepared NS. Results showed that a stable narrow sized HC NS of amorphous spherical particles 500 ± 64 nm diameter and zeta potential -18 ± 2.84 mV could be produced. The ocular bioavailability of a microfluidic precipitated HC NS (300 nm) was assessed and compared to a similar sized, milled HC NS and HC solution as a control. The precipitated and the milled NS achieved comparable AUC0-9h of 28.06 ± 4.08 and 30.95 ± 2.2, respectively, significantly (P < 0.01) higher than HC solution (15.86 ± 2.7). These results illustrate the opportunity to design sustained release ophthalmic formulations. Going nano via microfluidic precipitation was also exploited to tailor budesonide (BD) NS for pulmonary administration. The in vitro aerosolization by nebulization of a BD NS was studied in comparison with a commercial BD microsuspension. Overall, the fine particle fraction generated from BD NS (56.88 ± 3.37) was significantly (P < 0.05) higher than the marketed BD (38.04 ± 7.81). The mean mass aerodynamic diameter of BD NS aerosol (3.9 ± 0.48 μm) was significantly smaller (P < 0.05) than the microsuspension (6.2 ± 1.09 μm) indicating improved performance for BD NS. In conclusion, findings of this study support the hypothesis of using microfluidic nanoprecipitation as a promising and economical technique of drug nanosizing.

In this experiment, more than one hundred volatile organic compounds were analyzed with the gas chromatograph. Six capillary columns ZB wax plus, ZB 35, TR1MS, TR5, TG5MS and TG1301MS with different polarities have been used for separation of compounds and illicit drugs. The Abraham solvation model has five solute descriptors. The solute descriptors are E, S, A, B, L (or V). Based on the six stationary phases, six equations were constructed as a training set for each of the six columns. The six equations served to calculate the solute descriptors for a set of illicit drugs. Drugs studied are nicotine (S= 0.870, A= 0.000, B= 1.073), oxycodone(S= 2.564. A= 0.286, B= 1.706), methamphetamine (S= 0.297, A= 1.570, B= 1.009), heroin (S=2.224, A= 0.000, B= 2.136) and ketamine (S= 1.005, A= 0.000, B= 1.126). The solute property of Abraham solvation model is represented as a logarithm of retention time, thus the logarithm of experimental and calculated retention times is compared.

Cette thèse s'intéresse au comportement de l'hélium dans le verre nucléaire de type R7T7. Pour cela, quatre types de matériaux ont été utilisés dans ce travail, à savoir des verres R7T7 inactifs infusés par de l'hélium sous pression, des verres implantés par des ions 3He+, des verres dopés au curium et des verres irradiés en réacteur. L'étude de la solubilité de l'hélium par infusion dans le verre R7T7 a permis de monter que l'hélium s'insère dans le volume libre du verre et indique une valeur d'environ 1016 at. cm-3 atm.-1. La limite d'incorporation de l'hélium dans ce type de verre a été aussi déterminée ; sa valeur s'élève à environ 2×1021 at.-He cm-3.Les études de diffusion ont montré que la migration de l'hélium est contrôlée par la seule population d'hélium dissoute dans le volume libre du verre. Les données de relâchement qui ont pu être traitées par un modèle de diffusion classique, indiquent des coefficients de diffusion obéissant à la loi d'Arrhenius suivante : D = D0 exp(-Ea/kBT), avec D0 = 0,022 et 5,4×10-3 cm2 s-1 et Ea = 0,61 eV pour les verres infusés et dopés respectivement. Ces résultats traduisent un mécanisme de diffusion thermiquement activé qui n'est pas être influencé par l'endommagement du verre ni par les fortes teneurs en hélium étudiées (jusqu'à 8×1019 at. g-1).Les caractérisations des propriétés macroscopiques, structurales et microstructurales des verres irradiés en réacteur n'ont pas révélé d'impact lié à la présence d'hélium à fortes teneurs. Les modifications observées, à savoir un gonflement de 0,7%, une baisse de la dureté de 38%, une augmentation entre 8 et 34% de la ténacité et une satbilisation de la structure sous irradiation, ont été attribuées à l'endommagement balistique du verre induit par l'irradiation en réacteur. Les caractérisations microstructurales au MEB des verres implantés à fortes teneurs, dopés au curium et irradiés en réacteur ont montré une microstructure homogène exempte de bulles, de pores ou bien de fissuration.Les résultats de ce travail ont été utilisés pour développer un modèle prédictif de comportement à long terme de l'hélium dans un colis réel de verre R7T7. Le modèle considère l'historique thermique du colis, sa fracturation et son activité alpha. / The present thesis focuses on the study of helium behavior in R7T7 nuclear waste glass. Therefore, four types of materials were used in this work. These are non radioactive R7T7 glasses saturated with helium under pressure, glasses implanted with 3He+ ions, glasses doped with curium and glasses irradiated in nuclear reactor.The study of helium solubility in saturated R7T7 glass has shown that helium atoms are inserted in the glass free volume. The results yielded a solubility of about 1016 at. cm-3 atm.-1. The incorporation limit of helium in this type of glass has been determined ; its value amounted to about 2×1021 at. cm-3.Diffusion studies have shown that the helium migration is controlled by the single population dissolved in the glass free volume. An ideal diffusion model was used to simulate the helium release data. The determined diffusion coefficients fall into the following Arrhenius law : D = D0 exp(-Ea/kBT), where D0 = 0,022 and 5,4×10-3 cm2 s-1 and Ea = 0,61 eV for the helium saturated glass and the doped one respectively. Theses results reflect a thermally activated diffusion mechanism which is not influenced by the glass radiation damage and the studied helium concentrations (up to 8×1019 at. g-1).Characterizations of the macroscopic, structural and microstructural of glasses irradiated glasses did not reveal any impact associated with the presence of helium at high concentrations. The observed modifications i.e. a swelling of 0,7%, a decrease in hardness by 38%, an increase between 8 and 34%of the fracture toughness and a satbilization of the glass structure under irradiarion were attributed to the glass nuclear damage induced by the irradiation in reactor. Characterizations by SEM of R7T7 glasses implanted with helium at high concentrations, doped with curium and irradiated in nuclear reactor showed a homogeneous microstructure free of helium bubbles, pores or cracking.The results of the present work were used to develop a long term diffusion model of helium in an industrial R7T7 nuclear waste glass. The model considers the glass thermal history, its fracturing and its alpha activity.