Side friction factors are defined as all those actions related to the activities taking place by the sides of the road and sometimes within the road, which interfere with the traffic flow on the travelled way. They include but not limited to pedestrians, bicycles, non-motorised vehicles, parked and stopping vehicles. These factors are normally very frequent in densely populated areas in developing countries, while they are random and sparse in developed countries making it of less interest for research and consequently there is comparatively little literature about them. The objective of this thesis is to analyze the effect of these factors on traffic performance measures on urban roads. To carry out this work, a research design was formulated including specific methods and prescribed limitations. An empirical case study methodology was adopted where Dar-es-salaam city in Tanzania was chosen as a representative case. The scope was limited to include only road-link facilities. A sample of these facilities including two-lane two-way and four-lane two-way roads were selected and studied. The study was conducted in two parts, of which each involved a distinctive approach. Part one involved a macroscopic approach where traffic and friction data were collected and analyzed at an aggregated level, whereas part two involved a microscopic approach where data of individual frictional elements were collected and analysed individually. Data collection was mainly performed by application of video method, which proved to be effective for simultaneous collection of traffic and side friction data. Data reduction was conducted chiefly by computer, using standard spreadsheet and statistical software packages, mainly SPSS and some computer macros. The analysis part was based on statistical methods, chiefly regression analysis. In the macroscopic approach, traffic and friction data from all sites were adjusted through a process called ‘normalization’, which enabled the data from the different sites to be merged, and consequently to obtain speed-flow curves for each road type. The individual friction factors through regression analysis were weighted and combined into one unit of measure of friction called "FRIC". The effect of "FRIC" on speed-flow curves was analyzed. The results showed significant impact on speed for both road types. Impact on capacity was identified on two-lane two-way roads while field data on four-lane two-way roads did not allow this. In the microanalysis approach, effect of individual side friction factors on speed was analyzed. The results showed that on two-lane two-way roads, all studied factors exhibited statistically significant impact on speed, while on four-lane two-way roads, only one factor showed the same. The results also identified impact values characteristic to the individual friction factors on some roads. Recommendations were made based on these results that highway capacity studies particularly in developing countries, should include the friction variable, though in the form suitable to their own particular circumstances. Further recommendations were made that these results should be applied to formulate management programs seeking to limit levels of side friction on high mobility urban arterial streets in order to improve traffic safety and operation efficiency. / <p>QC 20100701</p>

Thesis (MScEng)-- Stellenbosch University, 2013. / ENGLISH ABSTRACT: Speed-flow-density relationships are the most useful tools in the highway design and planning process. They are useful in predicting the roadway capacity, in determining the adequate level-of-service of traffic flow and in determining travel time for a given roadway. Two-lane two-way rural highways constitute the vast majority of the rural road network in South Africa. Nowadays in the Western Cape and other provinces of South Africa, the speed-flow-density relationships normally used for rural transportation studies are derived from the Highway Capacity Manual, which reflects the traffic conditions in the North American situation. Since the North American traffic conditions may be different from the South African conditions, a need to investigate speed-flow-density relationships on these highways in South Africa arises in order to justify any investment made on these roads. In this context, a video technique was used to collect traffic flow data during morning peak hours on two rural two-lane two-way highways in the Western Cape Province in order to investigate these relationships. Through the use of Adobe premiere C.S 6 software, travel time of individual vehicles and distance headways were measured and used in computation of average speed and average density. Several researchers have developed models to describe the relationships between traffic characteristics on uninterrupted flow facilities. In this study, some of these models were tested using collected data in order to investigate which model fits the data satisfactorily. Statistical methods were used to evaluate the ability of each model to predict the flow characteristics over the whole range of data. Average speed and density data were used through regression analysis to perform curve fitting and testing of these developed models. In the next stage, the model which provided a best representation of the data on each section was selected and through the application of the steady-state equation (2.1), flow-density and speed-flow relationships were established on these sections. The available data were also used to investigate the impact the observation time has on the speed-flow curve and the resulting capacity value. Finally, the developed speed-flow curves were used to determine the capacities of the study sections. These capacity values were used to determine if the shoulder usage contributes in increasing the capacity of two-lane two-way highways by comparing them to the capacity provided by HCM. / AFRIKAANSE OPSOMMING: Spoed-vloei-digtheid verhoudings is baie handig in die beplanning en ontwerp van paaie. Dit kan ook gebruik word in die voorspelling van kapasiteit, diensvlak en reistyd. Twee-laan twee-rigting paaie maak die grootste deel van die Suid-Afrikaanse padnetwerk uit en vir die beplanning daarvan word van Amerikaanse spoed-vloei-digtheid verhoudings gebruik gemaak aangesien daar nog nie voorheen ‘n studie hiervan in SA gemaak is nie. Video-opnames is gebruik om verkeersvloeidata op twee paaie in die omgewing van Stellenbosch te versamel. Die reistyd en digtheid van individuele voertuie is tydens spitstye waargeneem. Die data is gebruik om te bepaal watter modelle die beste is om die spoed-vloei-digtheid verhoudings vir hierdie paaie te modelleer. Die beste modelle is dan gebruik om die kapasiteit van die paaie te bepaal en dit te vergelyk met die Amerikaanse waardes.