This bachelor thesis “Family Residence with Two Flats“ is composed in a form of implementing project documentation and it contains all requisites according to the valid regulations. It is a complex of two connected buildings. The first part is the base for athletes and spectators. The second part consists of a sports hall with the playing surface and bleachers for spectators. The first part of the building has 3 floors. The sports hall is roofed using trusses made of laminated wood. Part of this work is the study of dispositions specialization focused on technical equipment of buildings and wooden structures and seminar papers presented in the form of drawings details.

This master’s thesis deals with the design documentation multifunction sports hall. The building is situated in the region in the Vysočina village Humpolec, cadastral district Humpolec. The building is designed as a prefabricated skeleton, where the vertical load-bearing structures are designed from the prefabricated skeleton of PREFA BRNO and filling and partition walls of the structural system POROTHERM and BTB fittings. Horizontal structures are formed by the supporting elements prefabricated skeleton system of PREFA BRNO and ceiling panels SPIROLL. The main single-storey multifunction hall is roofed with wooden trusses of curved from glued laminated timber and purlins carrying roof deck. The other part of the building is covered with flat single-ply roofs. The building is divided into a main single-storey multifunction sports hall and an outbuilding with facilities for athletes and spectators about two floors above ground and a third technical floor. The building is solved as barrier-free.

Master thesis processes documentation for the realization of the new building of the multi-functional sporting centre. Object is designed as the two storey building with the external thermal insulation system ETICS. Object is designed according to the appropriate legislation. Object fulfills demands for the low-energy standard. Building is without cellar with the flat warm roof. Load bearing constructions of the floor ceilings are made out of prestressed concrete panels SPIROL. Load bearing construction of the hall roof is made of the glulam timber beams and purlins with the bracing.

This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.

The master‘s thesis concerns about the freestanding multipurpose sport hall with a base for sportsmen and spectators and its associated sport and regeneration centre. The object is situated in a city district Brno Bohunice. The designed building is divided into a single storey multipurpose sport hall and an outbuilding with two above-ground floors and a partial third floor above the entrance part of the building. Object’s plan shape forms a rectangle with recessed entrance part. The load-bearing structure consists of a combined column and wall construction system. The main multipurpose hall is roofed with arched glulam laminated trusses, which are supported by steel columns covered by sandwich panels. The outbuilding’s vertical load-bearing structure is formed by clay blocks. The horizontal load-bearing structure is formed by prestressed concrete floor slab. The building is based on shallow foundations. The object is designed to be barrier-free for sportsmen and visitors as well.

In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.

The solution of this Diploma thesis is a construction technological project of multipurpose sports hall Kojetín. It contains a comprehensive section for the implementation of this structure. Work in this technological project is included the following elements: inspection and test plan, technological standard, technical reports, the financial plan, the timetable, principles of organization development, budget, maintenance and service life, energy label of the building envelope.

Diploma thesis deals a project documentation of a new school pavilion SOU in the location Pisek because of the unsatisfactory existing school bulding, which is located at a small distance from the new pavilion. Investor wants to build a new object of universal classrooms for ca. 180 students and sports hall with hygienic and technical facilities, which will be able for football club FC Pisek (football fields and central object of FC Pisek are close to neighboring plots). Investor wants to let the school canteen be on the current place, which is north of the new object. The object is designed as a two-floor with roof ascent (3.NP terrace), part of the building is embedded in the ground. The structural system of the school object is a ceramic bricks system, structural system of the sports hall is a reinforced concrete system. The roof of school object is warm flat roof and roof of sport hall is warm flat roof as well but mono-pitched type. The object has a U -shaped.

This diploma thesis solves a project Sports and wellness center. This object is located on land number 1241/549, 1241/571in cadastral office Velké Bílovice. The plot is located on a street Podivínská in Velké Bílovice. Velké Bílovice are smaller town in South Moravia. The building has two floors ane one underground floor. The building is constructed of brick systém SUPERTHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 49. Ceilings are monolithic reinforced concrete. The building offers three squash courts, a fitness center, snack bar, sauna with massage. The entire building is expected movement of persons with reduced mobility. The roof is flat and angled wooden beam. Entrance doors and window are Aluminium

Stockholm Stad behöver utöka kapaciteten på sina badhus samt idrottsanläggningar. Därtill är renoveringsbehovet stort på samtliga badhus. Badet i Västertorp täcker ett stort område och är populärt men behöver nu rivas pga. det dåliga skicket. Istället ska man bygga bostäder på platsen och flytta ner det nya badet till Mellanbergsparkens södra spets för att samtidigt bli en bullerbarriär mellan motorvägen (E4/E20) och parken som man vill börja programmera. Det nya badhuset blir ett fint avslut på parken och ska även innehålla två fullstora idrottshallar, gym och gruppträningslokaler varför jag har kommit att benämna det Sportcenter. Sportcentret är således indelat i tre volymer bestående av en idrottsdel, en gymdel och en baddel. Sportcentrets placering får en ökad tillgänglighet via motorvägen och undviker att belasta områdets befintliga trafik, till skillnad från om badhuset hade stått kvar. Jag har ritat en ny rondell som kommer lösa dagens svåra situation samt sänka farten in till stadsdelen. Därtill kommer två nya busshållplatser i båda riktningarna att få plats. Platsens befintliga utebad ska inte integreras i anläggningen då det bara används tre månader under hela året samt ska fortsätta förbli gratis. I övrigt bygger förslaget på riktlinjer från idrottsförvaltningen. Programmets funktion har fått forma den yttre volymen. Jag började låta analyser från platsen forma projektet och grunda konceptet med meshfasaden som ska representera vatten och fart. Den utanpåliggande fasaden har fyra grundtankar i sin formgivning: att ge ett spännande inre ljusspel, skydda från solens direkta strålar, absorbera bullret samt bli ett skådespel för bilarna på motorvägen natt som dag. Fokus var att lösa programmet logistiskt samt utan nivåskillnader och samtidigt få spännande estetiska lösningar vad gäller material och ljus. Därtill finns lösningar på hur badhuset kan hållas rent på ett enklare sätt. Att lösa programmet på den lilla tomten är dock grundutmaningen. Projektet har varit en övning i nya program för hur man projekterar arkitektur, samt loggar sin arbetsprocess. / Stockholm City needs to expand the capacity of their public baths and sports facilities. In addition, the renovation need is great for all bathhouses. The popular bath in Västertorp covers a large area but needs to be demolished due to its poor condition. Instead appartments will be built on the site and the bath will move to the southern tip of the park Mellanbergsparken to become a noise barrier between the highway (E4/E20) and the park that the city wants to start programming. The new bathhouse will be a nice end to the park and will also include two full-sized sport halls, fitness center and group training rooms hence the name "Sports Center". The sports center is thus divided into three volumes, consisting of the sport halls, a fitness part and the bath-house. The location of the center will have an increased availability through the highway and thus avoiding burdening the area's existing traffic. I have designed a new roundabout that will solve today's difficult traffic situation and reduce speed in the neighborhood. There are also two new bus stops in both directions. The site's existing swimming-pool should not be integrated into the plan as it is only used for three months during the year and should continue to remain with free entrance. Otherwise, the proposal is based on guidelines from the Sport Management department of the municipality. The function of the program has been shaping the outer volume. Analyses from the area has defined the project and the concept of the mesh facade is to represent water and speed. The facade has four basic ideas: to provide an exciting internal play of light, protect from the sun's direct rays, absorb the noise and become a spectacle for the cars on the highway day and night. The focus was to solve the program logistically while getting exciting aesthetic solutions in materials and light. In addition, there are solutions to how the bath house can be kept clean through easy design methods. The challenge was to fit all the functions on the relatively small plot. The project has been an exercise in new programs on how to project architecture, and logging the work process.