Spelling suggestions: "subject:"surfaceenhanced"" "subject:"surfacemechanical""
121 |
Application Of Surface-enhanced Raman Scattering (sers) Method For Genetic AnalysesKarabicak, Seher 01 March 2011 (has links) (PDF)
Raman spectroscopy offers much better spectral selectivity but its usage has been limited by its poor sensitivity. The discovery of surface-enhanced Raman scattering (SERS) effect, which results in increased sensitivities of up to 108-fold for some compounds, has eliminated this drawback.
A new SERS active substrate was developed in this study. Silver nanoparticle-doped polyvinyl alcohol (PVA) coated SERS substrate prepared through chemical and electrochemical reduction of silver particles dispersed in the polymer matrix. Performances of the substrates were evaluated with some biologically important compounds.
The specific detection of DNA has gained significance in recent years since increasingly DNA sequences of different organisms are being assigned. Such sequence knowledge can be employed for identification of the genes of microorganisms or diseases. In this study, specific proteasome gene sequences were detected both label free spectrophotometric detection and SERS detection. In label free spectrophotometic detection, proteasome gene probe and complementary target gene sequence were attached to the gold nanoparticles separately. Then, the target and probe oligonucleotide-modified gold solutions were mixed for hybridization and the shift in the surface plasmon absorption band of gold nanoparticles were followed.
SERS detection of specific nucleic acid sequences are mainly based on hybridization of DNA targets to complementary probe sequences, which are labelled with SERS active dyes. In this study, to show correlation between circulating proteasome levels and disease state we suggest a Raman spectroscopic technique that uses SERGen probes. This novel approach deals with specific detection of elevated or decreased levels of proteasome genes&rsquo / transcription in patients as an alternative to available enzyme activity measurement methods. First, SERGen probes were prepared using SERS active labels and specific proteasome gene sequences. Then DNA targets to complementary SERGen probe sequences were hybridized and SERS active label peak was followed.
|
122 |
Quantum Chemistry in Nanoscale Environments: Insights on Surface-Enhanced Raman Scattering and Organic PhotovoltaicsOlivares-Amaya, Roberto 18 December 2012 (has links)
The understanding of molecular effects in nanoscale environments is becoming increasingly relevant for various emerging fields. These include spectroscopy for molecular identification as well as in finding molecules for energy harvesting. Theoretical quantum chemistry has been increasingly useful to address these phenomena to yield an understanding of these effects. In the first part of this dissertation, we study the chemical effect of surface-enhanced Raman scattering (SERS). We use quantum chemistry simulations to study the metal-molecule interactions present in these systems. We find that the excitations that provide a chemical enhancement contain a mixed contribution from the metal and the molecule. Moreover, using atomistic studies we propose an additional source of enhancement, where a transition metal dopant surface could provide an additional enhancement. We also develop methods to study the electrostatic effects of molecules in metallic environments. We study the importance of image-charge effects, as well as field-bias to molecules interacting with perfect conductors. The atomistic modeling and the electrostatic approximation enable us to study the effects of the metal interacting with the molecule in a complementary fashion, which provides a better understanding of the complex effects present in SERS. In the second part of this dissertation, we present the Harvard Clean Energy project, a high-throughput approach for a large-scale computational screening and design of organic photovoltaic materials. We create molecular libraries to search for candidates structures and use quantum chemistry, machine learning and cheminformatics methods to characterize these systems and find structure-property relations. The scale of this study requires an equally large computational resource. We rely on distributed volunteer computing to obtain these properties. In the third part of this dissertation we present our work related to the acceleration of electronic structure methods using graphics processing units. This hardware represents a change of paradigm with respect to the typical CPU device architectures. We accelerate the resolution-of-the-identity Moller-Plesset second-order perturbation theory algorithm using graphics cards. We also provide detailed tools to address memory and single-precision issues that these cards often present.
|
123 |
High Sensitivity Surface Enhanced Raman Scattering Detection of TryptophanKandakkathara, Archana A Unknown Date
No description available.
|
124 |
Using Flow Cytometry to Evaluate the Functionalization and Targeting of Surface Enhanced Raman Scattering NanoparticlesMullaithilaga, Nisa 15 November 2013 (has links)
The effective diagnosis of leukemia subtypes requires the detection of multiple cell surface markers. Current methods of detection use mostly fluorophores, which are limited by their large spectral bandwidths, photobleaching, and incompatibility with histological stains used for morphological assessments. Antibody-conjugated Surface enhanced Raman scattering (SERS) nanoparticles is an alternative tool that overcomes these limitations. A current drawback of SERS is the lack of available tools to analyze the bioconjugation of antibodies to nanoparticles following EDC/sulfo-NHS cross-linking, which produces inconsistent results and determines the efficacy of SERS probe targeting. This study uses the flow cytometry approach to evaluate SERS particles by incorporating FITC and DyLight650 secondary antibodies. Flow cytometry was also used to assess targeting of particles to markers on LY10 cells and CLL cells and to detect SERS signals by inserting a 710 BP 10nm FWHM filter specific for MGITC.
|
125 |
Using Flow Cytometry to Evaluate the Functionalization and Targeting of Surface Enhanced Raman Scattering NanoparticlesMullaithilaga, Nisa 15 November 2013 (has links)
The effective diagnosis of leukemia subtypes requires the detection of multiple cell surface markers. Current methods of detection use mostly fluorophores, which are limited by their large spectral bandwidths, photobleaching, and incompatibility with histological stains used for morphological assessments. Antibody-conjugated Surface enhanced Raman scattering (SERS) nanoparticles is an alternative tool that overcomes these limitations. A current drawback of SERS is the lack of available tools to analyze the bioconjugation of antibodies to nanoparticles following EDC/sulfo-NHS cross-linking, which produces inconsistent results and determines the efficacy of SERS probe targeting. This study uses the flow cytometry approach to evaluate SERS particles by incorporating FITC and DyLight650 secondary antibodies. Flow cytometry was also used to assess targeting of particles to markers on LY10 cells and CLL cells and to detect SERS signals by inserting a 710 BP 10nm FWHM filter specific for MGITC.
|
126 |
Nanophotonics with subwavelength apertures: theories and applications.Pang, Yuanjie 08 May 2012 (has links)
This dissertation presents subwavelength optics with focus on the theory and applications
of subwavelength apertures in a metal film. Two main issues regarding the
optics with subwavelength apertures are investigated. As the first issue, the extraordinary
optical transmission (EOT) through a single hole in a metallic waveguide is
presented. A total transmission through a single subwavelength aperture is theoretically
predicted for a perfect electric conductor regardless of the aperture size, without
relying on aperture arrays and surface corrugations as presented in previous works.
The waveguide EOT is then applied to boost the optical throughput of an apertured
near-field scanning optical microscope (NSOM) probe. Using a new structure for
the apertured NSOM probe which allows for waveguide EOT, the optical throughput
and the damage threshold are boosted by 100× and 40× as compared to a conventional
structure, and the experimental findings are backed-up by comprehensive
finite-difference time-domain (FDTD) simulations. Single fluorescent molecules are
scanned using the EOT apertured NSOM probe, and a spatial resolution of 62 nm is
achieved. As the second issue, subwavelength apertures are found useful for optical trapping.
A small dielectric particle can significantly change the optical transmission through
an aperture by dielectric loading, and subsequently, a large optical force is induced which favors trapping. A self-induced back-action (SIBA) optical trap is designed
using a circular nanohole in a gold film. Trapping of 50 nm polystyrene particle
is experimentally achieved, which is not possible using a conventional single beam
optical tweezers. The circular nanohole SIBA trap works beyond the perturbative
regime, as proven by FDTD simulations and a Maxwell stress tensor analysis. We
further improve the nanohole trapping using a double-nanohole, which is more sensitive
for small dielectric changes due to the intense local field enhancement between
its two sharp tips. A single 12 nm silica sphere is experimentally trapped using the
double-nanohole, as the smallest trapped dielectric particle reported. We also achieve
the trapping of a single protein – a bovine serum albumin (BSA) protein with a hydrodynamic
radius of 3.4 nm in the folded form. The trapped BSA is also unfolded
by the large optical force, as confirmed by experiments with changing optical power
and changing pH. The high signal-to-noise ratio of 33 in monitoring single protein
trapping and unfolding shows a tremendous potential for using the double-nanohole
as a sensor for protein binding events at a single molecule level. / Graduate
|
127 |
Lipid Bilayers as Surface Functionalizations for Planar and Nanoparticle BiosensorsIp, Shell Y. 05 December 2012 (has links)
Many biological processes, pathogens, and pharmaceuticals act upon, cellular membranes. Accordingly, cell membrane mimics are attractive targets for biosensing, with research, pathology, and pharmacology applications. Lipid bilayers represent a versatile sensor functionalization platform providing antifouling properties, and many receptor integration options, uniquely including transmembrane proteins. Bilayer-coated sensors enable the kinetic characterization of membrane/analyte interactions. Addressed theoretically and experimentally is the self-assembly of model membranes on plasmonic sensors. Two categories of plasmonic sensors are studied in two parts. Part I aims to deposit raft-forming bilayers on planar nanoaperture arrays suitable for multiplexing and device integration. By vesicle fusion, planar bilayers are self-assembled on thiol-acid modified flame-annealed gold without the need for specific lipid head-group requirements. Identification of coexisting lipid phases is accomplished by AFM imaging and force spectroscopy mapping. These methods are successfully extended to metallic, plasmon-active nanohole arrays, nanoslit arrays and annular aperture arrays, with coexisting phases observed among the holes. Vis-NIR transmission spectra of the arrays are measured before and after deposition, indicating bilayer detection. Finally, the extraction of membrane proteins from cell cultures and incorporation into model supported bilayers is demonstrated. These natural membrane proteins potentially act as lipid-bound surface receptors. Part II aims to encapsulate in model lipid bilayers, metallic nanoparticles, which are used as probes in surface enhanced Raman spectroscopy. Three strategies of encapsulating particles, and incorporating Raman-active dyes are demonstrated, each using a different dye: malachite green, rhodamine-PE, and Tryptophan. Dye incorporation is verified by SERS and the bilayer is visualized and measured by TEM, with support from DLS and UV-Vis spectroscopy. In both parts, lipid-coated sensors are successfully fabricated and characterized. These results represent important and novel solutions to the functionalization of plasmonic surfaces with biologically relevant cell membrane mimics.
|
128 |
Fabricação e caracterização de filmes finos de perileno : arquitetura molecular e aplicações sensoriais /Volpati, Diogo. January 2008 (has links)
Orientador: Carlos José Leopoldo Constantino / Banca: Marystela Ferreira / Banca: Neri Alves / O Programa de Pós-Graduação em Ciência e Tecnologia de Materiais, PosMat, tem caráter institucional e integra as atividades de pesquisa em materiais de diversos campi da Unesp / Resumo: Filmes finos do bis benzimidazo perileno (AzoPTCD) foram fabricados usando as técnicas de Langmuir, Langmuir-Blodgett (LB) e evaporação a vácuo (PVD). A estabilidade térmica durante a fabricação dos filmes PVD ('DA ORDEM DE' '400 GRAUS' a '10 POT. -6' Torr) e a integridade da estrutura molecular pela dissolução do AzoPTCD em ácidos fortes para a fabricação dos filmes de Langmuir e LB foram monitoradas pelo espalhamento Raman. Complementarmente a análise termogravimétrica revelou que a degradação térmica do AzoPTCD ocorre a '675 GRAUS'. Os filmes de Langmuir revelaram um alto empacotamento molecular do AzoPTCD sobre a subfase aquosa, onde as moléculas estão apoiadas sobre seu eixo maior ou menor. A adição de íons metálicos na subface aquosa revelou uma sensibilidade do AzoPTCD a presença destes íons, deslocando as isotermas para maiores valores de área molecular média. O crescimento dos filmes LB e PVD sobre substratos sólidos foi monitorado através da espectroscopia de absorção UV-Vis, e a morfologia dos filmes PVD foi estudada via microscopia de força atômica (AFM) em função da espessura em massa. A organização molecular dos filmes PVD foi determinada usando as regras de seleção de superfície aplicadas na espectroscopia de absorção no infravermelho (modos de transmissão e reflexão). Apesar da organização molecular, a difração de raios-x revelou que os filmes PVD são amorfos. Cálculos teóricos (Density functional theory -B3LYP) foram usados para atribuição dos modos vibracionais nos espectros de absorção no infravermelho e espalhamento Raman ressoante Nanoestruturas metálicas, capazes de ativar os fenômenos de amplificação em superfície foram usadas para estudos de espalhamento Raman ressonante amplificado em superfície (SERRS) e fluorescência amplificada em superfície (SEF) nos filmes LB e PVD. Através... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Thin solid films of bis benzimidazo perylene (AzoPTCD) were fabricated using Langmuir, Langmuir-Blodgett (LB) and physical vapor deposition (PVD) techniques. Thermal stability during the fabrication of PVD films ('DA ORDEM DE' '400 GRAUS' a '10 POT. -6' Torr) and chemical structure integrity by dissolution of the AzoPTCD in a strong acid were monitored by Raman scattering. Complementary thermogravimetric results showed that thermal degradation of AzoPTCD occurs at '675 GRAUS'. Langmuir films showed a high molecular packing with the molecules tilted onto the aqueous subphase. Besides, the AzoPTCD л-A isotherms were shifted to larger areas due to the addition of metallic ions in the subphase. The growth of the LB and PVD films were established through UV-Vis absorption spectroscopy, and the surface morphology in PVD films was probed by atomic force microscopy (AFM) as function of the mass thickness. The AzoPTCD molecular organization in the PVD films was determined using the selection rules of infrared absorption spectroscopy (transmission and reflection-absorption modes). Despite the molecular organization, X-ray diffraction revealed that the PVD films are amorphous. Theoretical calculations (Density Functional Theory, B3LYP) were used to assign the vibrational modes in the infrared and Raman spectra. Metallic nanostructures, able to sustain localized surface plasmons (LSP) were used to achieve surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluirescence (SEF) in the LB and PVD films. The conductivity and rectifier character of the PVD films of AzoPTCD were determined by current as function of tension curves (I(V)) in dc measurements. The impedance spectroscopy in ac measurements was used to study the performance of PVD films of the AzoPTCD as transductor elements in sensing units applied to discriminate... (Complete abstract click electronic access below) / Mestre
|
129 |
Squeezing light in nanoparticle-film plasmonic metasurface : from nanometric to atomically thin spacer / Confinement de la lumière dans des métasurfaces plasmoniques nanoparticule-film : d'une couche séparatrice d'épaisseur nanométrique à atomiqueNicolas, Rana 20 October 2015 (has links)
Les plasmons polaritons de surface (SPP) et les plasmons localisés de surface (LSP) font l’objet de nombreuses investigations du fait de leur fort potentiel technologique. Récemment, une attention particulière a été portée à des systèmes supportant ces deux types de résonances en déposant des nanoparticules (NPs) métalliques sur des films minces métalliques. Plusieurs études ont mis en évidence le couplage et l’hybridation entre modes localisés et délocalisés. Cependant, une compréhension en profondeur des propriétés optiques et du potentiel de ces interfaces est toujours manquante. Nous avons mené ici une étude de systèmes NPs/film couplés. Nous avons étudié à la fois expérimentalement et théoriquement l’influence d’une couche séparatrice ultra-mince en SiO2 ainsi que l’évolution des différents modes plasmoniques pour différentes épaisseurs. Nous avons ainsi mis en lumière que de tels systèmes couplés offrent des propriétés optiques exaltées et une large accordabilité spectrale. Nous avons aussi cherché à diminuer l’épaisseur de la couche séparatrice vers le cas ultime monoatomique en utilisant le graphène. Du fait du caractère non-diélectrique de celui-ci, nous avons mis en évidence un comportement optique inattendu de la résonance plasmonique. Nous avons expliqué celui-ci par la mise en évidence du dopage du graphène par les NPs, ce qui est un premier pas en direction de dispositifs optoélectroniques à base de graphène. Enfin, après avoir amélioré notre compréhension théorique de ces systèmes, nous avons évalué leur potentiel comme capteurs SERS ou LSP / Surface plasmon polariton (SPP) and Localized surface plasmon (LSP) have attracted numerous researchers due to their high technological potential. Recently, strong attention was paid to the potential of SPP and LSP combinations by investigating metallic nanoparticles (NPs) on top of metallic thin films. Several studies on such systems have shown the coupling and hybridization between localized and delocalized modes. In this work, we propose a full systematic study on coupled NP/film systems with Au NPs and Au films. We investigate both experimentally and theoretically the influence of an ultra-thin SiO2 dielectric spacer layer, as well as the evolution of the plasmonic modes as the spacer thickness increases. We show that coupled systems exhibit enhanced optical properties and larger tunability compared to uncoupled systems. We also compare these results with those measured for coupled interfaces using graphene as a non-dielectric sub-nanometer spacer. Introducing graphene adds complexity to the system. We show that such coupled systems also exhibit enhanced optical properties and larger tunability of their spectral properties compared to uncoupled systems as well as unexpected optical behavior. We explain this behavior by evidencing graphene doping by metallic NPs, which can be a first step towards graphene based optoelectronic devices. After establishing a deep understanding of coupled systems we perform both SERS and RI sensing measurements to validate the high potential of these plasmonic interfaces
|
130 |
Spectroelectrochemical analysis of the Li-ion battery solid electrolyte interphase using simulated Raman spectra / Analys av anodens gränsskikt i litiumjonbatterier med spektroelektrokemi och simulerade RamanspektraAndersson, Edvin January 2020 (has links)
Lithium Ion Batteries (LIBs) are important in today's society, powering cars and mobile devices. LIBs consist of a negative anode commonly made of graphite, and a positive cathode commonly made from transition metal oxides. Between these electrodes are separators and organic solvent based electrolyte. Due to the high potential of LIBs the electrolyte is reduced at the anode. The electrolyte reduction results in the formation of a layer called the Solid Electrolyte Interphase (SEI), which prohibits the further breakdown of the electrolyte. Despite being researched for over50 years, the composition formation of the SEI is still poorly understood. The aim of this project is to develop strategies for efficient identification and classification of various active and intermediate components in the SEI, to, in turn, gain an understanding of the reactions taking place, which will help find routes to stabilize and tailor the composition of the SEI layer for long-term stability and optimal battery performance. For a model gold/li-ion battery electrolyte system, Raman spectra will be obtained using Surface Enhanced Raman Spectroscopy (SERS) in a spectroelectrochemical application where the voltage of the working gold electrode is swept from high to low potentials. Spectra of common components of the SEI as well as similar compounds will be simulated using Density Functional Theory (DFT). The DFT data is also used to calculate the spontaneity of reactions speculated to form the SEI. The simulated data will be validated by comparing it to experimental spectra from pure substances. The spectroelectrochemical SERS results show a clear formation of Li-carbonate at the SERS substrate, as well as the decomposition of the electrolyte into other species, according to the simulated data. It is however shown that there are several issues when modelling spectra, that makes it harder to correlate the simulated spectra with the spectroelectrochemical spectra. These issues include limited knowledge of the structure of the compounds thought to form on the anode surface, and incorrect choices in simulational parameters. To solve these issues, more work is needed in these areas, and the spectroelectrochemical methods used in this thesis needs to be combined with other experimental methods to narrow down the amount of compounds to be modelled. More work is also needed to avoid impurities in the electrolyte. Impurities leads to a thick inorganic layer which prohibits the observation of species in the organic layer.
|
Page generated in 0.0308 seconds