1 |
Minimum Symbol Error Rate Timing Recovery SystemBage Jayaraj, Nagendra 01 May 2010 (has links)
This thesis presents a timing error detector (TED) used in the symbol timing synchronization subsystem for digital communications. The new timing error detector is designed to minimize the probability of symbol decision error, and it is called minimum symbol error rate TED (MSERTED). The new TED resembles the TED derived using the maximum likelihood (ML) criterion but gives rise to faster convergence relative to MLTED. The new TED requires shorter training sequences for symbol timing recovery. The TED operates on the outputs of the matched filter and estimates the timing offset. The S-curve is used as a tool for analyzing the behavior of the TEDs. The faster convergence of the new TED is shown in simulation results as compared to MLTED. The new TED works well for any two-dimensional constellation with arbitrarily shaped decision regions.
|
2 |
Joint Preprocesser-Based Detectors for One-Way and Two-Way Cooperative Communication NetworksAbuzaid, Abdulrahman I. 05 1900 (has links)
Efficient receiver designs for cooperative communication networks are becoming increasingly important. In previous work, cooperative networks communicated with the use of L relays. As the receiver is constrained, channel shortening and reduced-rank techniques were employed to design the preprocessing matrix that reduces the length of the received vector from L to U. In the first part of the work, a receiver structure is proposed which combines our proposed threshold selection criteria with the joint iterative optimization (JIO) algorithm that is based on the mean square error (MSE). Our receiver assists in determining the optimal U. Furthermore, this receiver provides the freedom to choose U for each frame depending on the tolerable difference allowed for MSE. Our study and simulation results show that by choosing an appropriate threshold, it is possible to gain in terms of complexity savings while having no or minimal effect on the BER performance of the system. Furthermore, the effect of channel estimation on the performance of the cooperative system is investigated. In the second part of the work, a joint preprocessor-based detector for cooperative communication networks is proposed for one-way and two-way relaying. This joint preprocessor-based detector operates on the principles of minimizing the symbol error rate (SER) instead of minimizing MSE. For a realistic assessment, pilot symbols are used to estimate the channel. From our simulations, it can be observed that our proposed detector achieves the same SER performance as that of the maximum likelihood (ML) detector with all participating relays. Additionally, our detector outperforms selection combining (SC), channel shortening (CS) scheme and reduced-rank techniques when using the same U. Finally, our proposed scheme has the lowest computational complexity.
|
3 |
On the Ordering of Communication ChannelsJanuary 2014 (has links)
abstract: This dissertation introduces stochastic ordering of instantaneous channel powers of fading channels as a general method to compare the performance of a communication system over two different channels, even when a closed-form expression for the metric may not be available. Such a comparison is with respect to a variety of performance metrics such as error rates, outage probability and ergodic capacity, which share common mathematical properties such as monotonicity, convexity or complete monotonicity. Complete monotonicity of a metric, such as the symbol error rate, in conjunction with the stochastic Laplace transform order between two fading channels implies the ordering of the two channels with respect to the metric. While it has been established previously that certain modulation schemes have convex symbol error rates, there is no study of the complete monotonicity of the same, which helps in establishing stronger channel ordering results. Toward this goal, the current research proves for the first time, that all 1-dimensional and 2-dimensional modulations have completely monotone symbol error rates. Furthermore, it is shown that the frequently used parametric fading distributions for modeling line of sight exhibit a monotonicity in the line of sight parameter with respect to the Laplace transform order. While the Laplace transform order can also be used to order fading distributions based on the ergodic capacity, there exist several distributions which are not Laplace transform ordered, although they have ordered ergodic capacities. To address this gap, a new stochastic order called the ergodic capacity order has been proposed herein, which can be used to compare channels based on the ergodic capacity. Using stochastic orders, average performance of systems involving multiple random variables are compared over two different channels. These systems include diversity combining schemes, relay networks, and signal detection over fading channels with non-Gaussian additive noise. This research also addresses the problem of unifying fading distributions. This unification is based on infinite divisibility, which subsumes almost all known fading distributions, and provides simplified expressions for performance metrics, in addition to enabling stochastic ordering. / Dissertation/Thesis / Ph.D. Electrical Engineering 2014
|
4 |
Performance of physical layer security with different service integrity parametersPadala, Akhila Naga Sree Ravali, Kommana, Kavya January 2018 (has links)
Information security has been a very important issue in wireless networks. With the ever-increasing amount of data being exchanged over wireless networks, the confidentiality of information needs to be protected from unauthorized users called eavesdropper. Due to the broadcast nature of the wireless medium, the transmissions between legitimate users maybe overheard and intercepted by the unauthorized parties, which makes wireless transmission vulnerable to potential eavesdropping attacks. The security of wireless communications plays an increasingly important role in the cybercrime defense against unauthorized activities. We consider the wireless physical layer security which has been explored for the sake of enhancing the protection of wireless communications against eavesdroppers. We consider the problem of secret communication through Rayleigh fading channel in the presence of an eavesdropper in which the transmitter knows the channel state information of both the main and eavesdropper channel. Then, we analyze the average capacity of the main channel and eavesdropper channel from which an expression of secrecy capacity is derived based on the cumulative distribution function and probability density function of the signal to noise ratio. We also analyze an expression for the symbol error rate of the main channel, and the outage probability is obtained for the main transmission. Finally, we perform the numerical results in MATLAB.
|
5 |
System Performance of MIMO MRT/MRC System under Perfect CSIInturi, Satya Prakash Reddy, Macherla, Chaitanya January 2020 (has links)
Multiple Input and Multiple Output (MIMO) is one of the techniques used tiimprove the system performance. In this thesis, we improve and evaluate the system performance of MIMO deploying MRT technique at the transmitter and MRCtechnique at the receiver with an assuming that the system can obtain perfect CSI.We derived expressions for outage probability and symbol error rate and simulationgraphs for SISO, SIMO, MISO, and MIMO in terms of outage probability. Our results show that the MIMO system performance is better than other configurations.We also observed that SISO have the least performance where SIMO and MISOhave same performance. The performance also increases as the number of antennasincrease in the system and it is suggested to use MIMO when performance is givehigh priority than cost.
|
6 |
Analysis of RF Front-End Non-linearity on Symbol Error Rate in the Presence of M-PSK Blocking SignalsDsouza, Jennifer 03 October 2017 (has links)
Radio frequency (RF) receivers are inherently non-linear due to non-linear components contained within the RF front-end such as the low noise amplifier (LNA) and mixer. When receivers operate in the non-linear region, this will affect the system performance due to intermodulation products, and cross-modulation, to name a few. Intermodulation products are the result of adjacent channel signals that combine and create intermodulation distortion of the received signal. We call these adjacent channel signals blockers. Receiving blockers are unavoidable in wideband receivers and their effect must be analyzed and properly addressed. This M.S. Thesis studies the effect of blockers on system performance, specifically the symbol error rate (SER), as a function of the receiver non-linearity figure and the blocking signal power and modulation format. There have been numerous studies on the effect of non-linearity in the probability of true and false detections in spectrum sensing when blockers are present. There has also been research showing the optimal modulation scheme for effective jamming. However, we are not aware of work analyzing the effect of modulated adjacent channel blockers on communication system performance. The approach taken in this paper is a theoretical derivation followed by numerical analysis aimed to quantify the effect of receiver nonlinearity on communication system performance as a function of (1) receiver characteristics, (2) blocking signal powers, (3) signal and blocker modulation format, and (4) phase-synchronized/non-synchronized blocker reception. The work focuses on M-PSK modulation schemes. For high blocker powers and non-linearity, the Es/No (Eb/No) performance loss can be as high as 4.7 dB for BPSK modulated signal and BPSK modulated blockers when received in sync with the desired signal. When blockers have a random phase offset with respect to the desired signal, the performance degradation is about 2 dB for BPSK modulated desired and blocker signals. It was found that for an BPSK transmitted signal with phase-synchronous blockers, the SER (BER) deteriorates the most when the blocking signals are of the same modulation. The effect is reduced, but still significant, as the modulation order of the signal of interest or the blockers, or both increases. / Master of Science
|
7 |
Transparent Satellite Switching using Flexible Frequency-band ReallocationYagüe, Edgar Cámara, Carretero, José Manuel Menéndez January 2006 (has links)
<p>The society expects a global interconected digital communication system offering multimedia services, information on demand and interchange of information with a high data rates and low cost. </p><p>All this can not be realized with the terrestrial nets used nowadays cause it is necessary a high economic inversion to get a competitive capacity to interchange information between server and user. The next generation of satellite must have characteristics which improve the current generation, one important requirement is that the same satellite could make a treatment of the different input signals. With this we can avoid a spent of lots of money and time because we do not need terrestrial stations which modify the signals before the information is sent to the satellite.</p><p>For all this, we need an on board treatment of the information in the satellite. We design a frequency bank reallocation (FBR) network by using a filter bank system. This is the first step of the thesis. After we get FBR we introduce some different input signals and analyze the output, using parameters like symbol error rate and variance.</p><p>One important part in the thesis is the QAM signals used to test our system. For this, we design a modulator and a demodulator of QAM4, 16 and 64, paying more attention in the QAM64, cause is the modulation where more errors can appear due to we have got more possible chances which means more precision in the recovery of the signal.</p>
|
8 |
Transparent Satellite Switching using Flexible Frequency-band ReallocationYagüe, Edgar Cámara, Carretero, José Manuel Menéndez January 2006 (has links)
The society expects a global interconected digital communication system offering multimedia services, information on demand and interchange of information with a high data rates and low cost. All this can not be realized with the terrestrial nets used nowadays cause it is necessary a high economic inversion to get a competitive capacity to interchange information between server and user. The next generation of satellite must have characteristics which improve the current generation, one important requirement is that the same satellite could make a treatment of the different input signals. With this we can avoid a spent of lots of money and time because we do not need terrestrial stations which modify the signals before the information is sent to the satellite. For all this, we need an on board treatment of the information in the satellite. We design a frequency bank reallocation (FBR) network by using a filter bank system. This is the first step of the thesis. After we get FBR we introduce some different input signals and analyze the output, using parameters like symbol error rate and variance. One important part in the thesis is the QAM signals used to test our system. For this, we design a modulator and a demodulator of QAM4, 16 and 64, paying more attention in the QAM64, cause is the modulation where more errors can appear due to we have got more possible chances which means more precision in the recovery of the signal.
|
9 |
The Effect of Receiver Nonlinearity and Nonlinearity Induced Interference on the Performance of Amplitude Modulated SignalsMoore, Natalie 22 August 2018 (has links)
All wireless receivers have some degree of nonlinearity that can negatively impact performance. Two major effects from this nonlinearity are power compression, which leads to amplitude and phase distortions in the received signal, and desensitization caused by a high powered interfering signal at an adjacent channel. As the RF spectrum becomes more crowded, the interference caused by these adjacent signals will become a more significant problem for receiver design. Therefore, having bit and symbol error rate expressions that take the receiver nonlinearity into account will allow for determining the linearity requirements of a receiver. This thesis examines the modeling of the probability density functions of M-PAM and M-QAM signals through an AWGN channel taking into account the impact of receiver nonlinearity. A change of variables technique is used to provide a relationship between the pdf of these signals with a linear receiver and the pdf with a nonlinear receiver. Additionally, theoretical bit and symbol error rates are derived from the pdf expressions. Finally, this approach is extended by deriving pdf and error rate expressions for these signals when nearby blocking signals cause desensitization of the signal of interest. Matlab simulation shows that the derived expressions for a nonlinear receiver have the same accuracy as the accepted expressions for linear receivers. / Master of Science / All wireless receivers have some amount of nonlinearity that can distort a received signal and impact performance. For amplitude modulated signals, the power compression caused by the nonlinear receiver will cause distortions in the amplitude and phase of the received signal. Additionally, a high powered interfering signal at a close frequency can decrease the gain and distort the received signal. This thesis examines how the probability density of an amplitude modulated signal with a nonlinear receiver can be modeled for both of these situations. These theoretical probability density functions are used to derive theoretical error rate expressions for the signals both with and without the adjacent channel interference. Simulations in Matlab show that the accuracy of these derived expressions is similar to the accuracies of the linear receiver expressions. These derived expressions will be able to remove the need for time consuming simulation when designing receivers for wireless systems.
|
10 |
Performance analysis of dual hop cellular networksIslam, Muhammad Adeel, Shah, Khan Ahmad January 2011 (has links)
Explosive growth in wireless technology caused by development in digital and RF circuit fabrications put some serious challenges on wireless system designers and link budget planning. Low transmit power, system coverage and capacity, high data rates, spatial diversity and quality of services (QOS) are the key factors in future wireless communication system that made it attractive. Dual-hop relaying is the promising underlying technique for future wireless communication to address such dilemmas. Based on dual-hop relaying this thesis addresses two scenarios. In the first case the system model employs dual-hop amplify and forward (AF) multiple input multiple output (MIMO) relay channels with transmit and receive antenna selection over independent Rayleigh fading channels where source and destination contain multiple antennas and communicate with each other with help of single antenna relay. It is assumed that the source and destination has perfect knowledge of channel state information (CSI). Our analysis shows that full spatial diversity order can be achieved with minimum number of antennas at source and destination i.e. min{N_s N_d }. In the second case the performance analysis of dual-hop amplify and forward (AF) multiple relay cooperative diversity network with best relay selection schemes over Rayleigh fading channels is investigated where the source and destination communicate with each other through direct and indirect links. Only the performance of best relay is investigated which participates in the transmission alone. The relay node that achieves highest SNR at the destination is selected as a best relay. Once again our analysis shows that full diversity order can be achieved with single relay with fewer resources compare to the regular cooperative diversity system. / Muhammad Adeel Islam 0046 700 412 343
|
Page generated in 0.0429 seconds