271 |
Perceived Stress and Generalized Anxiety on Cardiovascular Health Measured by Ultrasound Carotid Intima-media ThicknessAllen, Everett 16 May 2014 (has links)
BACKGROUND: There are many studies that have documented the increasing impact of stress and anxiety on an individual’s health and well-being. Everyone handles stress and anxiety differently with these conditions having varying physiological effects. To better recognize whether or not a person may need help in tackling these conditions, scholars have developed reliable validated instruments. Two prominent instruments that effectively assess stress and anxiety levels are the Perceived Stress (PSS) and Generalized Anxiety Disorder (GAD-7) scales. Furthermore, the literature has shed light onto the importance of the carotid intima-media thickness (c-IMT) measurement as a tool in evaluating the risk of cardiovascular disease. After all, heart disease has been reported as being the number one killer of Americans in recent years. The specific aims of this study were to determine if there was an association between perceived stress / generalized anxiety and c-IMT (static association), and also if higher levels of perceived stress / generalized anxiety result in a significant increase in c-IMT (changes over time).
METHODS: Data was collected on about 700 participants comprised of employees from Emory University in Atlanta, Georgia. At baseline, six, twelve, and twenty-four months, the largest number of participants had completed and calculated their scores on the PSS and GAD-7 scales. At these same time points, participants had their IMT measured and recorded for the left and right common carotid arteries by a trained sonographer of the Emory Predictive Health Institute. Due to incomplete measurements and scores, only 228 participants were included for statistical analyses. This was still considered a suitable sample size given that this study only involved four measurement time points. Various statistical models were fitted for the data. All variables in the models were treated as categorical except for time which was continuous. Four separate models were built that included the variables perceived stress, age group, gender and time. In a similar manner, four models were built that included the variables generalized anxiety, age group, gender and time. AIC values, -2 log-likelihoods, partial correlations, p-values, and other relevant information were reported for these models. All statistical analyses were performed using the Statistical Analysis System (SAS), version 9.2.
RESULTS: The mean c-IMT measurements for the Emory participants were higher than established normal ranges. A strong correlation existed between the PSS and GAD-7 two-year averages when treated as continuous variables (.7316, p <.0001). Likewise, a meaningful relationship existed when both scales were categorical (.4154, p < .0001). The analyses revealed that the left and right mean IMT measurements for the common carotid arteries modeled a linear trend with an unstructured covariance the best. The partial correlations for perceived stress and generalized anxiety revealed weak, but significant positive associations with the mean c-IMT measurement. Although the slope coefficients were not significant for perceived stress, an increase from below average to above average perceived stress level still resulted in an increase in mean c-IMT measurement. Conversely, mild generalized anxiety was found to be statistically significant in the regression model of the left mean c-IMT. This was after controlling for age group and gender. The p-value for mild generalized anxiety was 0.0258, and the slope coefficient was 0.04856. IMT measurements were consistently higher for males on both sides compared to females. They were also higher on the left side compared to the right.
CONCLUSIONS: Failure to control anxiety could lead to c-IMT soaring to dangerous levels resulting in a myocardial infarction and/or cerebrovascular accident. Individuals should engage in healthy lifestyle practices that lower stress and anxiety levels to decrease the chances of cardiovascular disease. Based on this study’s findings, a person can certainly use their c-IMT readings, as well as their perceived stress and generalized anxiety scores, as indicators that lifestyle modifications may be needed.
|
272 |
Gas-Liquid Two-Phase Flow in Up and Down Vertical PipesAlmabrok, Almabrok Abushanaf 10 1900 (has links)
Multiphase flows occurring in pipelines with a serpentine configuration is an important phenomenon, which can be encountered in heat exchangers used in a variety of industrial processes. More specifically, in many industrial units such as a large cracking furnace in a refinery, the tubes are arranged in a serpentine manner and are relatively short. As flow negotiates round the 180o bend at the ends of the tubes, the generated centrifugal force could cause flow maldistribution creating local dry spots, where no steady liquid film is formed on the adjacent straight sections of the pipe. As a result, events including coking, cracking and overheating of heat transfer surfaces may occur and lead to frequent shutdown of the facilities. Consequently, this could increase operating costs and reduce production revenue. Thus, it is desirable to know the effect that the bends exert on the flow in the straight part of the pipe. Apart from this, knowledge of the bend effects on the flows in the pipeline could also be important for the design of other pipelines for gas/liquid transport, e.g. offshore gas and oil pipelines.
Quite a large number of studies have been found in the literature. The majority of them were for two-phase flow with small diameter pipes (i.d. ≤ 50 mm). However, studies with large diameter pipes (i.d. ≥ 100 mm), have increasingly been considered in recent years as problems related to large diameter vertical pipes are being encountered more and more often in industrial situations.
This thesis studies the effect of 180o bends on the characteristics and development of gas-liquid two-phase flows in large diameter downward and upward pipes. The study particularly focuses on the influence of serpentine configuration on flow structure, cross-sectional void distribution and circumferential liquid film profiles and their development along the downward and upward sections.
It was found that both the top and bottom bends have considerable impacts on flow behaviour, although to varying degrees. These impacts were highly dependent on the air and water flow rates. For sufficient flow rates, the bends were observed to create flow maldistribution in the adjacent straight section, due to the effects of centrifugal force. The air moved towards the inner zone of the bend and the water towards the outer zone, while a lesser quantity of water was identified on the other surfaces of the pipe.
Investigation of the film thickness development in the downward and upward sections showed that, the liquid film behaviour close to the bends was significantly different from those located further away. This can be attributed to the centrifugal force of the bends.
Examination of the power spectral density (PSD) along the downward and upward sections showed that, the shape of PSD located in the adjacent section to the bends, was substantially different from those located further away.
Furthermore, several flow regime maps were generated which showed that, in addition to bubbly, intermittent and annular flows, unstable flows existed along the upward section, particularly for low gas and water flow rates. In this study it was found that, the lower bend was periodically blocked by the liquid and then blown through by the accumulated air.
The data obtained from this study were compared with different theoretical correlations found in the existing literature. Some discrepancy between the results of the current study and those of previous published materials was noted. Updated correlations were presented which provided well results when they applied for the data obtained from the current study and previous studies.
|
273 |
Influence of High Mobility Polymer Semiconductors in Organic PhotovoltaicsMurphy, Leanne 22 April 2013 (has links)
Increasing global energy demands and diminishing supplies of conventional fuels are forcing the world to focus more on alternative power sources that are both renewable and ecologically benign. Solar energy is clean, regularly available and can be harvested without sacrificing valuable land space. Due to the associated cost of solar cells, however a very small portion of the world’s energy needs are supplied by the sun. Solution-processable organic photovoltaics (OPVs) offer the promise of lower production costs relative to conventional (silicon) solar cell technology. Solution-processing can be performed using reel-to-reel manufacturing, with printing and coating techniques that are significantly cheaper than current processing methods for inorganic semiconductors. Although OPV efficiency values currently remain inferior to those of conventional solar cells, the rate of improvement is much higher in OPVs than in other solar cell technologies. Recently an efficiency exceeding 10% was reported for organic solar cells.
An important difference between organic and conventional solar cells is the charge carrier mobility of the semiconductors, which tends to be relatively low in organic semiconductors. Recent advances in molecular design have led to polymer semiconductor materials that possess hole mobility values similar to that of amorphous silicon. The present study investigates potential improvements in OPV devices that can be achieved through the application of high hole mobility polymer semiconductor donors.
Two diketopyrrolopyrrole-based polymers, PDQT and PDBFBT, were selected for the role of electron donor in OPV devices due to their high mobilities and their optimum optical and electrical properties. Optimization of the process parameters was performed using PC61BM as the acceptor. A relatively high quantity of PC61BM (3 - 4 × the weight of the donor) is required in the donor-acceptor blends of both polymers in order to balance the high hole mobility. For these donor-acceptor blends, a solvent system consisting of chloroform/ortho-dichlorobenzene (4:1 v/v) is necessary for proper solubility, and an additive, 1,8-diiodooctane, is required to achieve an acceptable morphology.
The main benefit expected from the use of high mobility semiconductors is reduced charge recombination. This was studied in relation to the active layer thickness in standard and inverted OPV devices prepared using PC61BM as the acceptor. Normally the thickness of the active layer is required to be low (~100 nm) due to the poor charge transport mobility of the carriers. In this study, rather consistent power conversion efficiencies were achieved throughout a wide range of active layer thicknesses (~100 nm to ~800 nm). A comparison between standard and inverted device configurations demonstrates that the inverted configuration is more suitable for achieving thicker active layers when a high hole mobility donor is used. This is attributed to the longer hole collection path in the inverted structure, which can benefit from using a high hole mobility material.
Increasing the absorption spectra of the donor-acceptor blend was studied by substituting PC71BM for PC61BM. The improved absorption leads to greater charge generation. In PDQT devices, the increase in absorption that is contributed by PC71BM appears to be of greatest benefit when active layers are not very thick. Therefore, when thick active layers (>500 nm) are required, the use of PC61BM is sufficient, in conjunction with a high mobility donor.
Finally, an increase in a polymer’s crystallinity can often lead to greater mobility. This can be accomplished through various annealing techniques. The improved crystallinity of PDBFBT that occurs as a result of thermal annealing was studied in OPV applications. Although hole mobility of PDBFBT in the lateral direction improves with thermal annealing, mobility in the vertical direction decreases with increasing temperature. This suggests that the crystallinity of PDBFBT is oriented in the lateral direction as opposed to the vertical direction, thereby directing charge flow horizontal to the surface. With thermal annealing, an optimal amount of PC61BM added to PDBFBT can increase the vertical mobility to fairly high values. Nevertheless, the efficiency of standard and inverted OPV devices decreases with increased annealing temperature. This is attributed to agglomeration of PC61BM that occurs from an increase in annealing temperature. The results of this study demonstrate that thermal annealing is not beneficial for PDBFBT:PC61BM films in OPV applications due to the vertical orientation of devices.
All of the studies presented in this work involve the use of high hole mobility polymer semiconductors as donor materials for OPV applications. This work will provide a deeper understanding of the properties required for the development of new semiconductor materials in OPV applications. Furthermore, this work will be very useful for the design of device structures for more feasible manufacturing of large area OPV devices via high speed roll-to-roll printing processes.
|
274 |
Condensation Of Steam On Multiple Horizontal TubesMakas, Aytac 01 April 2004 (has links) (PDF)
The problem of condensation of steam on a vertical tier of horizontal tubes is investigated by both analytical and experimental methods in this study. A computer program is written to perform the analysis of laminar film condensation on the horizontal tubes. The program is capable to calculate condensate film thickness and velocity distribution, as well as the heat transfer coefficient within the condensate. An experimental setup was also manufactured to observe the condensation phenomenon.
Effects of tube diameter and temperature difference between steam and the tube wall on condensation heat transfer have been analytically investigated with the computer program. Experiments were carried out at different inclinations of the tier of horizontal tubes. Effects of the steam velocity and the distance between the horizontal tubes are also experimentally investigated. Results of the experiments are compared to those of the studies of Abdullah et al., Kumar et al. and Nusselt as well as to the analytical results of the present study.
|
275 |
Accuracy In Body Composition Assessment With Three Different Methods Compared To DexaDuz, Serkan 01 January 2003 (has links) (PDF)
The purpose of this study was to investigate differences among the percent
body fat (%BF) values of Turkish sedentary male and female university students
measured by dual-energy x-ray absorptiometry (DEXA), skinfold (SKF), ultrasound
(US) and hand to hand bioelectrical impedance analysis (BIA). Two hundred eight
Turkish university students (one hundred four males and one hundred four females)
aged between 18 to 26 years old participants participated in this study voluntarily.
%BF assessment was performed by the SKF, US, BIA and DEXA methods.
Differences among DEXA, SKF, US and BIA were examined by applying a series of
paired-t test. Multiple regression analyses were conducted to developed regression
equations to predict %BF from SKF and US measurements. Results demonstrated
that there were significant differences between DEXA and SKF, US, and BIA
measurements for males and females. The mean %BF derived from DEXA was
significantly (p< / .001) greater than those of SKF, US and BIA for males and females.
Multiple regression analyses showed that SKF and US measurement of subcutaneous
fat at three-sites gave the best prediction to %BF for male and female separately. The
multiple correlations using three sites simultaneously for men and women were
r=0.92, SEE=2.4 and r=0.91, SEE=2.8 for SKF and r=0.93, SEE=2.3 and r=0.90,
SEE=3.0 for US, respectively. In summary, with the new regression equation US
appears to be a reliable, portable, and non-invasive tool which can be used by any
field investigator on obese or thin individuals. Finally, new regression equations
developed do not seem to be superior to those reported using calipers.
|
276 |
Effects Of Off-center Angle On The Heat Transfer Coefficient On Vertical Tier Of Multiple Spherical SurfacesKaya, Ebubekir 01 January 2005 (has links) (PDF)
EFFECTS OF OFF-CENTER ANGLE
ON THE HEAT TRANSFER COEFFICIENT ON VERTiCAL TIER OF MULTIPLE SPHERICAL SURFACES
Kaya, Ebubekir
M.S., Department of Mechanical Engineering
Supervisor: Assoc. Prof. Dr. Cemil Yamali
December 2004, 112 pages
The purpose of this study is to investigate the laminar film condensation phenomenon of steam on a vertical tier of multiple spherical surfaces by using both analytical and experimental methods. The analytical heat transfer results were obtained by following the Nusselt type of analysis and represented graphically. In addition, in order to observe the real behavior of the film condensation, an experimental setup was manufactured and experiments were done.
In analytical section / mass flow rate, (mean) velocity, film thickness, local heat flux and local heat transfer coefficient values were obtained and plotted as depending on angular position. Moreover, mean heat flux and mean heat transfer coefficient variations were presented with respect to diameter of the sphere and sub-cooling. On the other hand, for the experimental section, heat flux and mean heat transfer coefficient values were obtained and expressed as depending on sub-cooling. To see the effects of off-center angle, setup was inclined for different angles and experiments were repeated for each inclination angle. At the end of the study, mean heat transfer coefficients belong to analytical and experimental studies were compared to each other as well as to the literature.
|
277 |
Quantitative Auswertung von Skelettszintigrammen mittels der „Regions of Interest“-Technik an der kaudalen Halswirbelsäule des PferdesKeyl, Margarethe 30 June 2010 (has links) (PDF)
Im Rahmen der szintigraphischen Untersuchung der Halswirbelsäule gibt es unterschiedliche Aussagen zum physiologischen
Speicherungsverhalten, insbesondere der kaudalen Facettengelenke. Eine Objektivierung der Szintigramme und Ermittlung von
Normalbereichen der entsprechenden Speicherquotienten ist
daher wichtig und stellt das Ziel dieser Arbeit dar. Zur Untersuchung kamen dafür 31 Pferde, bei denen es sich um Patienten der Chirurgischen Tierklinik in Leipzig aus dem Jahr 2008 handelte. Falls bei einem Pferd eine Lahmheit der Vordergliedmaße vorhanden war, wurde mit Hilfe der klinischen und szintigraphischen Untersuchung, sowie mittels diagnostischer Anästhesien als deren Ursache die Halswirbelsäule ausgeschlossen. Alle Pferde wiesen eine freie Beweglichkeit des Halses in alle Richtungen auf. Zur Bildung von Speicherquotienten wurden die als Interessenareale dienenden Facettengelenke C3/C4 bis C7/Th1, sowie der Wirbelkörper des sechsten Halswirbels zu verschiedenen Referenzarealen ins Verhältnis gesetzt. Als Referenzareale wurden dabei der Wirbelkörper des dritten und des vierten Halswirbels, sowie das auch als Interessenareal dienende Facettengelenk C3/C4 getestet. Anschließend wurden Normalbereiche für die Speicherquotienten ermittelt.
Nach sonographischer Muskeldickenmessung über den Facettengelenken wurden deren Speicherquotienten mit Hilfe einer Formel auf einen Nullwert korrigiert, und für diese korrigierten Werte wurden ebenfalls Normalbereiche ermittelt. Es zeigte sich, dass die Speicherquotienten nach der Muskeldickenkorrektur gegenüber den nativen Speicherquotienten eine größere Streuung aufwiesen und somit größere und ungenauere Normalbereiche hervorbrachten. Dementsprechend sollten die nativen Speicherquotienten bevorzugt werden. Als das am besten geeignete Referenzareal für die Interessenareale C4/C5 bis C7/Th1 erweist sich hierbei die Isokontur-ROI auf dem Facettengelenk C3/C4. Für das Interessenareal C3/C4 eignet sich sowohl der Vergleich mit dem Referenzareal C3, als auch der mit dem Referenzareal C4. Das Interessenareal auf dem Wirbelkörper C6 wird am besten zum Referenzareal C4 ins Verhältnis gesetzt. Hervorzuheben sind die nativen Werte der Normalbereiche für die Gelenke C5/C6 und C6/C7, da hier am häufigsten röntgenologische Veränderungen zu finden sind. Sie betragen für das Gelenk C5/C6 auf der linken Halsseite 0,82-1,10 und auf der rechten Halsseite 0,86-1,10. Für das Gelenk C6/C7 beträgt der Normalbereich für die linke Halsseite 0,75-1,23 und für die rechte Halsseite 0,81-1,17.
Zusammenfassend ist zu sagen, dass die quantitative Auswertung mittels der „Regions of Interest“-Technik an der Halswirbelsäule durchaus möglich ist und mit dieser Arbeit akzeptable Normalbereiche für die Facettengelenke C3/C4 bis C7/Th1 und für den Wirbelkörper C6 ermittelt werden konnten. Es fehlen nun noch Werte von Pferden mit einer klinischen Halswirbelsäulenproblematik, um die Aussagekraft der
hier ermittelten Normalbereiche zu überprüfen.
|
278 |
Transient response analysis for fault detection and pipeline wall condition assessment in field water transmission and distribution pipelines and networks.Stephens, Mark Leslie January 2008 (has links)
Condition assessment of water distribution pipeline assets has been the focus of water authorities for many years. Transient response analysis, including Inverse Transient Analysis (ITA), provides a new potential method for performing specific nondestructive tests that gives much broader information regarding the condition of pipelines than existing technologies. The basic concept involves inducing a transient in a pipeline and measuring its pressure response. The pressure response is theoretically a function of the condition of the pipeline wall (which is the fundamental characteristic related to the propagation of a transient wavefront) and reflections and damping from any fault that may be present. If an accurate transient model of the pipeline under examination can be developed then it may then be possible to isolate particular parameters in it (relating to the wall thickness of the pipeline or faults such as blockages, air pockets and leaks) and fit these to give optimal matches between the model predicted and measured response of the pipeline. This process is often referred to as inverse analysis (and hence the derivation of the name Inverse Transient Analysis). While a significant amount of numerical and laboratory investigation has been carried out focussing on the use of ITA for leak detection, few field studies have been undertaken. The goal of this research is to determine whether transient response analysis and Inverse Transient Analysis (ITA) can be applied in field situations to provide useful information regarding the condition of pipeline walls and the presence of specific faults such as blockages, air pockets and leaks. Numerous field tests are conducted on large scale transmission pipelines, small scale distribution pipelines and a distribution network in order to obtain a view of the nature of the measured transient responses at each scale and to identify any common characteristics. The capacity of existing transient models to replicate the measured responses is then assessed and they are found to be generally incapable of replicating the field data. Given the physical complexity of field pipelines, and a number of complex phenomena that have been traditionally neglected, this result is not unexpected. The research proposes the development of transient models that can be calibrated to measured responses. These models incorporate mechanisms for including mechanical dispersion and damping and follow precedents developed in other fields of engineering in which damping of transient phenomena is significant. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1325427 / Thesis (Ph.D.) -- University of Adelaide, School of Civil and Environmental Engineering, 2008
|
279 |
Studies on adipose tissue, body fat, body water and energy expenditure during the first four months of infancy using magnetic resonance imaging, skinfold measurements and the doubly labelled water method /Olhager, Elisabeth January 2003 (has links) (PDF)
Diss. (sammanfattning) Linköping : Univ., 2003. / Härtill 4 uppsatser.
|
280 |
Wood and fibre properties of fertilized Norway spruce /Lundgren, Christina, January 2003 (has links) (PDF)
Diss. (sammanfattning). Uppsala : Sveriges lantbruksuniv., 2003. / Härtill 4 uppsatser.
|
Page generated in 0.0493 seconds