Plastic hypodermic needles are a potential solution to the problem of disease spread through needle reuse. Plastics could be used to potentially reduce needle reuse as they are easier to destroy than steel. A key issue in their acceptance is the force required to penetrate a patient; a smaller force is associated with less pain. The effect that needle parameters have on the penetration force is studied in an effort to better understand how to reduce penetration forces and increase the success of penetrations for plastic needles. These parameters - geometry, tip radius, diameter, material, and lubricant - are studied through penetration, buckling, and coefficient of friction testing. The tests are conducted on steel needles, which serve as a control group, as well as two varieties of plastic needles. The outcome is a quantitative understanding of the effect that the various parameters have on penetration force, which is used to inform plastic needle design.

This study produced and analyzed shaped tungsten wire tips formed through electrochemical etching. Specifically, the cone length and the radius of curvature of the tip were analyzed. Having the tips move dynamically through an electrolytic solution, such as potassium hydroxide, and tuning the initial starting depth of the tungsten wire along with the dynamic speed of the tungsten wire as it passed throughout the solution allowed various types of tip profiles to be produced. The tip's radius of curvature was able to be reproduced with an accuracy between 88 - 92 %. The method provided would be applicable for the production of various styles of liquid-metal ion source (LMIS) probes and scanning probe microscope (SPM) tips.

Matériaux incontournables des matériaux fonctionnels, les alliages à mémoire de forme(AMF) peuvent présenter de très larges déformations réversibles. La Transformation de Phase Martensitique (TPM), ayant lieu lorsqu’il est soumis à une action mécanique ou thermique, lui confère des caractéristiques particulières. Le comportement thermomécanique des AMF est à présent bien maîtrisé. Cependant la connaissance de leur comportement `a la rupture reste un enjeu majeur pour leur dimensionnement dans le cadre de leur industrialisation pérenne. Ces travaux de recherche se sont attachés `a la connaissance, la description et la quantification du phénomène de localisation en pointe de fissure liée à la TPM induite sous contrainte, au travers du développement d’un modèle prédictif et de sa corrélation expérimentale par mesures de champs simultanées lors d’essais de rupture sur des éprouvettes fissurées de NiTi. Deux modèles analytiques basés sur la mécanique linéaire de la rupture, intégrant le caractère dissymétrique du comportement des AMF en traction/compression, ont été développés pour la prédiction des zones de transformation au voisinage de la pointe de fissure en tenant compte des différents modes de rupture ( élémentaires et mixtes I+II) et du rayon de courbure en pointe de fissure. Un banc de caractérisation par mesures simultanées de champs cinématiques par corrélation d’images (DIC) et thermique par thermographie infrarouge a été développé pour cartographier les champs expérimentaux d’essais de rupture en mode I sur des éprouvettes pré-fissurées. Cette bonne corrélation des modèles analytiques ouvre de nombreuses perspectives concernant l’analyse du couplage thermo mécanique associé à la TPM en pointe de fissure, l’enrichissement des modèles analytiques initiaux, et la confrontation avec les résultats expérimentaux pour des modes de rupture plus complexes (II et mixte I+II). / Major player among functional materials, Shape Memory Alloys (SMA) may undergo verylarge reversible strain. SMA exhibit a Martensitic Phase Transformation (MPT) when they aresubmitted to mechanical or thermal actions, and that gives them some specific characteristics.The thermomechanical behavior of SMA is now well controlled. However, the knowledge of theSMA fracture behavior is a major challenge for their design and sizing for their sustainableindustrialization. This research project has focused on the understanding, describing and quantifyingof the phenomenon of localization at the crack tip due to stress-induced MPT. The study includestwo main aspects: the development of an analytical model and its experimental correlation bysimultaneous field’s measurements during tests on cracked NiTi specimens. Two analytical modelsbased on the linear fracture mechanics and those introduce the asymmetrical nature of the SMAbehavior in tension/compression, were developed for the prediction of transformation zones in thevicinity of the crack tip, taking into account the fracture mode (elementary and mixed ones)and the radii of curvature of the crack tip. A testbench with the measurement of simultaneouskinematic field with Digital Image Correlation (DIC) and thermal field with infrared thermographywas designed for mapping the experimental fields during fracture tests in mode I on pre-crackedspecimen. This good correlation of analytical models opens up many perspectives on the analysisof thermomechanical coupling associated with the MPT at the crack tip, the enrichment of the initialanalytical models, and comparison with experimental results for more complex failure modes (II andmixed I+II).

The most commonly known macro scale probing devices are simply comprised of metallic leads used for measuring electrical signals. On the other hand, micromachined probing devices are realized using microfabrication techniques and are capable of providing very fine, micro/nano scale interaction with matter; along with a broad range of applications made possible by incorporating MEMS sensing and actuation techniques. Micromachined probes consist of a well-defined tip structure that determines the interaction space, and a transduction mechanism that could be used for sensing a change, imparting external stimuli or manipulating matter. Several micromachined probes intended for biological and nanotechnology applications were fabricated, characterized and tested. Probes were developed under two major categories. The first category consists of Micro Electromagnetic Probes for biological applications such as single cell, particle, droplet manipulation and neuron stimulation applications; whereas the second category targets novel Scanning Probe topologies suitable for direct nanopatterning, variable resolution scanning probe/dip-pen nanolithography, and biomechanics applications. The functionality and versatility of micromachined probes for a broad range of micro and nanotechnology applications is successfully demonstrated throughout the five different probes/applications that were studied. It is believed that, the unique advantages of precise positioning capability, confinement of interaction as determined by the probe tip geometry, and special sensor/actuator mechanisms incorporated through MEMS technologies will render micromachined probes as indispensable tools for microsystems and nanotechnology studies.