The diploma thesis deals with non-destructive testing of concrete as well as with the relationship between determined parameters and the compressive strength of concrete. The thesis is mainly focused on the ultrasonic pulse velocity method and the rebound hammer test. The experimental part of the thesis describes non-destructive tests performed on concrete blocks. The compressive strength was tested on the drill cores taken from the concrete blocks. The aim of this thesis is to find regression models of the relationship between the compressive strength and non-destructive parameters, and the subsequent analysis of the results.

Cílem této diplomové práce bylo provést diagnostiku vysokonapěťového stejnosměrného stykače se zaměřením na zpětnou komutaci a lepení oblouku, navrhnout a ověřit úpravy, které odstraní tyto negativní jevy. Měření obloukového napětí, tlaku a pomocí rychlokamery byly použity při diagnostice těchto jevů. Změny na arcrunnerech a jhu magnetického obvodu byly využity při jejich odstraňování. Úpravy na arcrunneru zmenšily skokové nárusty délky oblouku a úpravy na jhu navýšily sílu na oblouk mezi rozevírajícími se kontakty. Navrhnuté změny na stykači snížily časovou ztrátu v důsledku zpětné komutace, a tak zkrátily čas přenosu oblouku.

This thesis deals with measurement of hardness and microhardness in relation to structure of homogeneous and heterogeneous materials. In the introduction basic theoretical background is commented, i.e. definitions, terminology, principles of measuring techniques for estimation of hardness, microhardness, tensile strength, compressive strength and bending strength. Follows a brief review of present research results focused on use of described principles in materials engineering. Then the experimental equipment and sample preparation is described. The crucial part of the thesis is summary of achieved results of original measurement and discussion of their relations to each other. Finally, the groundbreaking estimation is described, showing the correlation of chemical composition gradient and mechanical properties in interfacial zone of geopolymeric material.

A building industry is expanding branch all the time and it intervenes in the life of everyone. Aeroconcrete is very attractive and actual subject nowadays because economy is important point of view of production. This material finds a wide-spread use thanks to its specific properties. The good manipulation and great thermal insulating properties are secured by its porous structure. Furthermore, proper material selection provides a saving of power of house for every customer demands. Due to aeroconcrete's sufficient compressive strength it is useful for both constructions and internal walls. Fundamental and very important for final material properties is raw material composition of aeroconcrete. A relationship between composition of filler (quartz sand) and resultant properties of aeroconcrete is an objective of the thesis.

The thesis deals with formation of a workplace for preparation gaseous mixtures and their future usage. The main goal of the thesis is testing of new materials which have suitable usage as catalysts. Gaseous mixture is prepared by calorimetric mass flow meters with control valve and multiposition microelectric valve actuators. The next part describes measuring of pressure and temperature and controlling of furnace temperature. The thesis deals with specifications of all devices, their circuitry, communication and program controlling. All devices are controlled by computer with program which is programmed in LabVIEW.

The aim of this master‘s thesis is design and construction of home meteo weather station, the choice of applicable temperature, humidity and pressure sensors and characterization of workable device of station. The core of the station is microcontroller ATmega8 used for process data from sensors. Evaluative criteria for choice of sensors will be comunicate interface, accuracy, operating range, current drain and other aspects. Outer transmittin unit measure air temperature and relative humidity. These data are trasmitted by wireless radio module to interior receiving unit, that measure interior temperature and atmospherical pressure and represent measured data to LCD display including dew point. The data are transmitting to the internet and storing in the database. Measured values are available on the web page where you can display the graphs of last measured values.

This thesis treats concept of autonomous temperature, relative humidity and pressure USB datalogger. Also there is explained datalogger function, hardware design with respect on device consumption and design of chassis. Furthermore, there is described communication protocol for control and reading out data by the PC. Furthermore, there are described firmware drivers for some used components and modules for USB communication, RTC and data compression. Lastly there is described software which is used for datalogger configuration and data read out.

First part of this work is focused on the description exist methods for measuring refraction index of air. Second part deal with concrete problem realization measurement unit for monitoring of refraction index of air. Refraction index of air is measured indirect method which is based on a modified Edlen formula.

This thesis is focused on the study of the influence of crystalline ingredients XYPEX, on the rheology of fresh concrete and durability of hardened concrete. It examines the influence of crystalline additives on the rheology of cement pastes with different types of cement with different temperatures, increasing water tightness and gas tightness and compressive strength. Also assesses pore structure with different bridging cracks.

The theoretical part of this master’s thesis contain comparing the methods of endurance hydraulic bound mixtures of concrete recycles against influence of water and freeze in Czech republic and some other states of The European Union. The practical part is dedicated about laboratory testing concrete recycles with mixtures of binders and its endurance against the water and freeze cycles in Czech republic. In made rollers is compared the strength in pure compression with the strength in pure compression after freezing cycles. From the results of the exams is considered about suitability of using these hydraulic bound mixtures to road construction depending on the kind of use binder, amount of the binder and water. Results of this thesis will be used to revision of national postscript of technological norm ČSN 73 6124-1.